Fujitsu 1FINITY S100 Switch

User Manual: Fujitsu 1FINITY S100 Switch FNC Resources — Data Sheets - Fujitsu United States

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Data Sheet

1FINITY™ S100 Switch
Layer 2 switch delivers dense Ethernet aggregation

S100 Blade at a Glance
• Modular 1RU blade design
• 1.2 Tbps switching capacity
• Four front-access slots for several combinations:
12 × SFP+ 10 GbE/OTU2
3 × CPF4 100 GbE
12 × SFP+ 1 GbE/10 GbE
1 × 100G NBO CFP2-ACO*
• Web-based GUI, CLI scripts, or NETCONF API

Product Overview
The 1FINITY S100 Layer 2 switch is a compact, carrier-grade
platform that delivers dense 1 GbE or 10 GbE to 100 GbE aggregation in
a 1RU blade. The S100 solves space and power challenges, delivers
high-performance scalable services, and reduces operating costs.
Solving the Problems of Convergence
Optical and switching technologies are advancing rapidly, and new
platforms often integrate the two. In recent years, vendors have created
sophisticated, converged, chassis-based platforms. This approach has
been successful, but it has also inflated initial costs; slowed innovation;
reduced space efficiency and physical flexibility; and encouraged vendor
lock-in.
Solutions to these problems can be found in a modular, disaggregated
product that employs pluggable elements. One of these is the 1FINITY™
S100 Switch, an innovative, modular Layer 2 switch that combines high
density and simplicity.
Modular Blade-Based Design
The modular design results in maximum pay-as-you-grow flexibility.
This design offers efficient scaling by adding additional 1RU systems as
needed. The small, dense form factor allows full utilization of rack space
in 1RU increments, and the absence of a large, multislot chassis
eliminates the need for rack partitioning.

Page 1 of 4

Operationally, the 1FINITY architecture is as close as possible to zero
intercept—with no chassis, there is zero space and zero cost prior to
initial service. The modular design enhances availability by minimizing
Mean Time To Repair(MTTR), since most sources of failure can be
quickly repaired. Additionally, the blade-based design is future-proof
and evergreen; users can upgrade modules as new technology becomes
available. Finally, with support for open optics, purchases can be made
from Fujitsu or directly from third-party vendors.

1FINITY: A Revolutionary, Disaggregated Platform
For network operators seeking an open, simple, scalable
architecture to meet escalating bandwidth demand, Fujitsu
provides 1FINITY, a revolutionary disaggregated platform that
delivers unprecedented flexibility, scalability, and efficiency. Unlike
the traditional converged systems other vendors provide, the
programmable, blade-centric design of 1FINITY offers operators a
pay-as-you grow approach with low initial investment. Additional
benefits include high rack space utilization, evergreen technology
design, operational convergence, open pluggable optics, open
APIs, and open protocols.

us.fujitsu.com/telecom

Data Sheet Fujitsu 1FINITY S100 Switch

Efficient 1 GbE or 10 GbE to 100 GbE Aggregation

Layer 2 Switching
The 1FINITY S100 Switch is a modular Ethernet switching platform ideal
for networks that require 1 GbE or 10 GbE to 100 GbE aggregation for
Carrier Ethernet 2.0–compliant E-Line services. The 1RU blade provides
1.2 Tbps bidirectional switching with four Plug-In Units (PIUs). The S100
blade supports 12 × SFP+ 10 GbE/OTU2, 3 × CPF4 100 GbE, 12 × SFP+ 1
GbE/10 GbE, or 1 × 100G NBO CFP2-ACO*.
The S100 simplifies operation with ITU-T Y.1731 for performance
monitoring, ITU-T G.8031, and G.8032 for sub-50 millisecond Ethernet
linear and ring protection switching, in addition to link aggregation for
facility protection.

with the FLASHWAVE 9500 and the 1FINITY T200 blade. For dense metro
DCI applications requiring up to 200G per lambda transport, the S100
can be deployed with the 1FINITY T100 blade.
Simplified Network Operations
The 1FINITY S100 blade has a Linux-based operating system and can be
managed with a Web-based GUI, CLI scripts, or the NETCONF API. The
GUI or CLI script can provision various service options. The NETCONF
management API makes it easy to use the 1FINITY S100 with SDN
network controllers, including Fujitsu Virtuora® Network Controller (NC).

×

Metro to Long-Haul Applications
The scalable blade architecture of the 1FINITY S100 can be used with
existing FLASHWAVE® 9500 and FLASHWAVE CDS deployments and with
the 1FINITY Transport blade family. The combination of an S100 and a
DWDM optical transport device like the FLASHWAVE 9500 can efficiently
transport 10 GbE and 100 GbE services on 100G optical lambdas. For
long-haul transport up to 200G per lambda, the S100 can be teamed

Up to 3 × CFP4
100 GbE ports

Page 2 of 4

Up to 12 × SFP+
10 GbE/OTU2 ports

Up to 12 × SFP+
1 GbE/10GbE ports

Up to 1 × CFP2-ACO
100 GbE DWDM port

us.fujitsu.com/telecom

Data Sheet Fujitsu 1FINITY S100 Switch

Technical Specifications

Base System Hardware

Physical Characteristics

System Configuration

Modular 1RU blade

PIU/FRU per Blade

4

Local Management Port
(LMP)

None

Dimensions
H×W×D

1.75 × 19 × 17.72” (44.45 × 483 × 450 mm)
W = 19” or 23” with mounting rails
D<600 mm with fiber management

Rack Compatibility

19 and 23”

Weight

S100 blade: 7.58 kg (16.711 lbs)
12 × SFP+ PIU: 0.609 kg (1.343 lbs)
3 × CFP4 PIU: 0.603 kg (1.329 lbs)
Fan: 0.380 kg (0.838 lb)

Management Port (LCN)

2 × Gigabit Ethernet SFP (T, SX, LX, EX, ZX)

Front LEDs

System Status, Severity, Port

Fan

Hot swappable fan unit
3 fans, alarm monitored

Operating Environment

Power Supply

Dual fixed DC power supplies

Operating Temperature

5 to +40 °C

Software OS

Linux

Short Term Temperature

–5 to +50 °C

Humidity, Normal Operating

5 to 85% noncondensing

Humidity, Short Term

5 to 93% noncondensing

Service Ports

Service Ports per Blade/PIU

Optical/Electrical Interface
Supported Interfaces

10 GbE/
OTU2

100 GbE

100 GbE
DWDM*

1 GbE/
10 GbE

12 × 10
GbE/OTU2
per PIU

3×
100 GbE
per PIU

1×
100 GbE
DWDM per
PIU

12 ×
1 GbE/
10 GbE
per PIU

SFP+

CFP4

CFP2-ACO

SFP/SFP+

SR, ER,
LR, ZR,
DWDM

SR4, LR4,
ERL, ERL,
ER4

TBD

SX, LX,
EX, ZX,
SR, ER,
LR, ZR,
CWDM
(Ethernet
Only)

Regulatory and Compliance

Performance Monitoring

Power
Power Supply

Dual fixed power supplies

120 V AC

No

–48 V DC

–40 V DC to –57 V DC

Power Consumption

700 W (typical)

FCC

FCC Part 15, Class A

NEBS

NEBS Level 3

UL/CSA

UL/CSA 60950-1

CE

CE

ROHS

ROHS

Service PMs

24-hour, 15-minute, and 5-minute bins for PMs

IEC/EN

IEC/EN 60825-1, 60825-2

Thresholds and TCA

Support (user assignable)

WEEE

WEEE

• Frame delay
• Delay variation
• Loss ratio

RCM

RCM

CDRH

FDQ CDRH

Ethernet SLA PMs (Y.1731)

Ethernet Port PMs

• Rx, Tx and error statistics
• Input and output rate per port
• Input and output utilization per port

Management
Virtuora NC

Yes

Web GUI

Yes

CLI

Yes

NETCONF/YANG

Yes

SNMP

SNMPv2

NTP, SNTP, Telnet, and FTP

Telnet, FTP and SFTP, NTP

In-Band Management

MVLAN

OSMINE Support

CLEI

Page 3 of 4

us.fujitsu.com/telecom

Data Sheet Fujitsu 1FINITY S100 Switch

Technical Specifications

Ethernet Switching

Ethernet Services

Switching Fabric

1.2 Tbps

E-Line

Yes

Packets per Second

1.44 Gbps

E-Line MEF CE 2.0

Yes*

MAC Address Table

• 750 K table entries
• Enable/diable learning per port

E-LAN

Yes

E-LAN MEF CE 2.0

Yes*

Jumbo Frames

9608 bytes

VLAN Tagging 802.1Q

4094 C-VLANs

Provider Bridging 802.1ad

4094 S-VLANs

Tagging

• CVLAN translation
• Double tagging
• Tagging, de-tagging, swapping
• Virtual untagged

Traffic QoS
Priority Queues

8 queues per port/4 queues per flow

Traffic Classification

• IEEE 802.1Q, Port, VLAN, ToS, DSCP
• CIR/CBS and PIR/PBS
• 2-rate, 3-color (2R3C)

Bandwidth Meters

• Bandwidth profiles
• Ingress and egress filters
• Per service in 1 Mbps increments

Ethernet OAM
Fault Management

• IEEE 802.1Q, Port, VLAN, ToS, DSCP
• CIR/CBS and PIR/PBS
• 2-rate, 3-color (2R3C)

Loopbacks

• Station loopback
• Loopback based on L2 and L3 filter
• MAC address swap for RFC 2544

Topology Discovery

LLDP

Network Protection
Ethernet Protection

• <50 ms protection switching
• 3.3 ms CCMs in hardware
• Nonrevertive/revertive
• ITU-T G.8031
• ITU-T G.8032
• Multiple instances/laddered rings

Link Aggregation

0:N LAG N<=16
1+1 LAG**
LAG over G.8032
MC-LAG**

Security
• L2 loop monitoring
• L2 loop protocol
• Filtering
* Supported in R2.2
** Supported in R2.3

Fujitsu Network Communications, Inc.
2801 Telecom Parkway, Richardson, TX 75082
Tel: 888.362.7763
us.fujitsu.com/telecom
© Copyright 2017 Fujitsu Network Communications, Inc. FLASHWAVE® is a trademark of Fujitsu Network Communications, Inc. (USA).
1FINITY™, VIRTUORA ®, FUJITSU (and design)® and “shaping tomorrow with you” are trademarks of Fujitsu Limited in the United States and other countries. All Rights Reserved.
All other trademarks are the property of their respective owners. Configuration requirements for certain uses are described in the product documentation.
Features and specifications subject to change without notice.

Page 4 of 4

3.0/R2.1/12.17
us.fujitsu.com/telecom



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Print high-res
Create Date                     : 2017:12:19 15:41:01-06:00
Creator                         : Adobe InDesign CC 2017 (Windows)
Modify Date                     : 2017:12:19 15:41:49-06:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Instance ID                     : uuid:9ef13e8f-cf13-4986-b935-8e976113697d
Original Document ID            : adobe:docid:indd:5e25a8a7-80b8-11dd-a082-f1648f0ac1ea
Document ID                     : xmp.id:9c793aaa-a8ce-5844-a734-fdd4f48c3d17
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8bdd1e20-4458-d34b-8cec-e24899bd21ae
Derived From Document ID        : xmp.did:73b1e165-7f6b-44f1-93d0-e7cdf74ca740
Derived From Original Document ID: adobe:docid:indd:5e25a8a7-80b8-11dd-a082-f1648f0ac1ea
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:12:19 15:41:01-06:00
Metadata Date                   : 2017:12:19 15:41:49-06:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools