Fujitsu F01K Smart Phone User Manual Safety Guide

Download:
Mirror Download [FCC.gov]
Document ID	3623369
Application ID	cMd2bq3flKIRa1Qa0q/Jsw==
Document Description	User Manual_Safety Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.2kB (527540 bits)
Date Submitted	2017-10-31 00:00:00
Date Available	2018-04-16 00:00:00
Creation Date	2017-10-23 16:57:56
Producing Software	doPDF Ver 7.2 Build 370 (Windows 7 Enterprise Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod	2017-10-25 09:14:01
Document Title	User Manual_Safety Guide
Document Creator	(Foxit Advanced PDF Editor)

Safety and
regulatory guide
2 Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations.
Pictograms and graphic symbols
Read this manual’s
Safety Information
and General
Precautions.
Do not use while
re-fuelling
Do not use
hand-held while
driving
This device may
produce a bright or
flashing light
For body-worn
operation maintain
a separation of 1.5
cm
Do not dispose of in
a fire
Small parts may
cause a choking
hazard
Avoid contact with
magnetic media
This device may
produce a loud
sound
Avoid extreme
temperatures
Keep away from
pacemakers and
other personal
medical devices
Avoid contact with
liquid, keep dry
Switch off when
instructed in
hospitals and
medical facilities
Do not try and
disassemble
Switch off when
instructed in aircraft
and airports
Do not rely on this
device for
emergency
communications
Safety and regulatory guide 3
Switch off in
explosive
environments
Only use approved
accessories
Important health information and safety precautions
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage
to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting with
desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting this product to the
computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.
Safety precautions for power supply unit
 Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are not
sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.
This product should be operated only with the following
designated power supply unit(s).
AC adapter:
4 Safety and regulatory guide
HTC, Model TC P5000-US, TC P5000-EU, TC P5000-UK
TC P5000-AU, TC P5000-IN, TC P5000-CN
Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack is
handled improperly. Do not attempt to open or service the
battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C
(140˚F).
WARNING: To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C
(140° F), or dispose of in fire or water. Recycle or
dispose of used batteries according to the local
regulations or reference guide supplied with your
product.
 Take extra precautions
 Keep the device dry and away from water or any liquid as it
may cause a short circuit.
 The phone should only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
 If the battery leaks:
 Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.
 Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.
 Take extra precautions to keep a leaking battery away from
fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in
places where the temperature may exceed 60°C (140°F), such as
on a car dashboard, window sill, or behind a glass that is exposed
Safety and regulatory guide 5
to direct sunlight or strong ultraviolet light for extended periods of
time. This may damage the product, overheat the battery, or pose
a risk to the vehicle.
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur
if earphones or headphones are used at high
volume for prolonged periods of time.
This device and earphone have been tested to comply with the
Sound Pressure Level requirement laid down in the applicable EN
50332-1 and/or EN 50332-2 standards.
Safety in aircraft
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s phone function on board an airplane is against
the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off your phone by switching to
Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or
even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment
in fuel depots, chemical plants, or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below
deck on boats, fuel or chemical transfer or storage facilities, and
6 Safety and regulatory guide
areas where the air contains chemicals or particles, such as grain,
dust, or metal powders.
Road safety
Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using a phone while driving (even
with a hands free kit) causes distraction and can lead to an
accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.
Safety precautions for RF exposure
 Avoid using your phone near metal structures (for example, the
steel frame of a building).
 Avoid using your phone near strong electromagnetic sources,
such as microwave ovens, sound speakers, TV and radio.
 Use only original manufacturer-approved accessories, or
accessories that do not contain any metal.
 Use of non-original manufacturer-approved accessories may
violate your local RF exposure guidelines and should be avoided.
Interference with medical equipment functions
This product may cause medical equipment to malfunction.
The use of this device is forbidden in most hospitals and
medical clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
Hearing aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may want to consult your
service provider, or call the customer service line to discuss
alternatives.
Electrical safety
 Accessories
 Use only approved accessories.
 Do not connect with incompatible products or accessories.
Safety and regulatory guide 7
 Connection to a car
Seek professional advice when connecting a phone interface to
the vehicle electrical system.
 Faulty and damaged products
 Do not attempt to disassemble the phone or its accessory.
 Only qualified personnel must service or repair the phone or
its accessory.
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is
subject to safety measures designed to protect users and their
environment.
 Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your
pants’ pocket before sitting down. It is also recommended that
you store the device in a protective case and only use the device
stylus or your finger when interacting with the touch screen.
Cracked display screens due to improper handling are not
covered by the warranty.
 Protect your phone
 Always treat your phone and its accessories with care and
keep them in a clean and dust-free place.
 Do not expose your phone or its accessories to open flames or
lit tobacco products.
 Do not drop, throw or try to bend your phone or its
accessories.
 Do not use harsh chemicals, cleaning solvents, or aerosols to
clean the device or its accessories.
 Do not paint your phone or its accessories.
 Do not attempt to disassemble your phone or its accessories,
only authorised personnel must do so.
 Store your phone or its accessories at temperatures between
0° C to 40° C.
 Please check local regulations for disposal of electronic
products.
 Do not carry your phone in your back pocket as it could break
when you sit down.
 Damage requiring service
Unplug the product from the electrical outlet and refer servicing
8 Safety and regulatory guide







to an authorized service technician or provider under the
following conditions:
 The product has been exposed to rain or liquid, dropped,
subject to impact or damaged.
 There are noticeable signs of overheating.
 The product does not operate normally when you follow the
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in rain, or near washbasins or other wet or
high humidity locations. If your product gets wet, do not try to
dry the product with the use of an oven or dryer, as this may
damage your product.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the device,
allow sufficient time for the moisture to evaporate before using
the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from high-temperature
conditions into a cooler environment, allow the device to
acclimate to room temperature before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach of
small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the phone.
Your phone contains small parts with sharp edges that may
Safety and regulatory guide 9
cause an injury or which could become detached and create a
choking hazard. Consult the doctor immediately if the
accessories or battery are swallowed.
 Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with
your phone:
 Do not grip the phone too tightly
 Press the buttons lightly
 Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
 Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore,
you must never rely solely on any wireless phone for emergency
communications.
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of X2-HT.
FCC ID: NM8X2-HT
To view your FCC ID in your device you may also go to the
Settings menu  About Phone  Legal Information  Regulatory.
To ensure continued reliable and safe operation of your device,
use only the accessories listed below with your X2-HT.
The Battery Pack has been assigned a model number of
B2Q3F100.
Operating temperature range: 32 °F to 104 °F (0 °C to 40 °C)
European Union notice
Products with CE marking comply with the Radio Equipment
Directive (2014/53/EU) issued by the Commission of the European
Community.
This radio equipment operates with the following frequency bands
and maximum radio-frequency power:
Maximum Tune-up Conducted Power (Unit:dBm)
GSM 900: 33.5
GSM 1800: 30.5
WCDMA Band VIII: 24.5
WCDMA Band I: 24.5
LTE Band 1: 23.5
LTE Band 3: 23.5
LTE Band 8: 22.5
10 Safety and regulatory guide
802.11 b: 18.5
802.11 g: 17
802.11 n HT20 (2.4GHz): 17
802.11 n HT40 (2.4GHz): 16.5
802.11 a: 17
802.11 n HT20 (5GHz): 17
802.11 n HT40 (5GHz): 17
802.11 ac: 17
Bluetooth: 9.0
ANT+: -2.01
NFC 13.56 MHz: -14.05dBuA/m at 10m
The operation of 5.15-5.35GHz is restricted to indoor use in all EU
Member States.
SAR information
Head: 0.12 W/kg@10g (CE)
Body: 1.10 W/kg@10g (CE)
Federal Communications Commission notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or TV
reception, which can be determined by turning the equipment on
and off, the user is encouraged to try to correct the interference
by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Safety and regulatory guide 11
 Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to the device that are not expressly approved
by HTC Corporation may void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
 This Transmitter has been demonstrated co-location compliance
requirements with Bluetooth and WLAN.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
 This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment.
Exposure to Radio Frequency Energy
Your wireless device has an internal antenna that emits radio
frequency (RF) energy. Human exposure to RF energy has been
and continues to be the subject of scientific research. According to
the U.S. Food and Drug Administration (FDA), “the weight of
scientific evidence has not linked cell phones with any health
problems.” You can access this FDA publication and other
information on human exposure to RF energy at:
U.S. Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/RadiationEmittingPr
oductsandProcedures/HomeBusinessandEntertainment/CellPhones/u
cm116282.htm
Federal Communications Commission:
http://www.fcc.gov/encyclopedia/radio-frequency-safety
NIH National Institute of Environmental Health Sciences:
http://www.niehs.nih.gov/health/topics/agents/cellphones/
World Health Organization:
http://www.who.int/mediacentre/factsheets/fs193/en/
IEEE Committee on Man and Radiation:
http://ewh.ieee.org/soc/embs/comar/
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de/
Specific Absorption Rate (SAR) Testing
Your device has been designed to comply with applicable limits for
RF exposure. These limits use a unit of measurement called
Specific Absorption Rate, or SAR, which refers to the rate at which
12 Safety and regulatory guide
the body absorbs RF energy. The Federal Communications
Commission (FCC) has established a SAR limit for mobile phones
of 1.0W/kg, which applies in the United States and other countries
that follow the FCC’s SAR limit. This limit is based upon standards
developed by expert non-government organizations, such as the
Institute of Electrical and Electronics Engineers (IEEE) and the
National Council on Radiation Protection and Measurements
(NCRP), and input from other federal agencies such as the FDA
and EPA. In countries that follow the Council of the European
Union, the SAR limit is 2.0 W/kg.
SAR testing is conducted with the device placed in common
operating positions (e.g., held against the head, worn on the body)
and transmitting at its highest certified power level in each
frequency band of operation. Because the device is transmitting at
its highest certified power level, SAR tests capture a worst-case
operating scenario and therefore often do not reflect the amount
of RF exposure during normal, everyday use. More information on
SAR testing is available on the FCC’s website at
http://www.fcc.gov/guides/wireless-devices-and-health-concerns.
HTC Corp. submitted SAR test results demonstrating compliance
with the FCC’s SAR limit for wireless devices as part of the FCC’s
equipment certification process for this device. These results can
be accessed via the FCC’s equipment authorization database
(found at https://www.fcc.gov/fccid) by searching for the device’s
FCC ID: NM8X2-HT.This device’s maximum SAR values as
reported to the FCC are:
SAR information
Head: 0.35 W/kg@1g (FCC)
Body: 0.70 W/kg@1g (FCC)
This device is restricted to indoor use only when operating in the
5150 to 5350 MHz frequency range.
Body-worn Operation
This device was tested for typical body-worn operations. A
Operation temperature
separation distance must be maintained between the user’s body
and the handset, including the antenna:
 0.5 cm to comply with the RF exposure requirements in Europe
 1 cm to comply with the RF exposure requirements in the U.S.
Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn
Safety and regulatory guide 13
accessories that do not meet these requirements may not comply
with RF exposure requirements and should be avoided.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of regulations. Do not use
the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact
your local dealer for replacement antenna.
Telecommunications & Internet Association (TIA) safety
information
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of 15 cm (6 inches) be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
 Should ALWAYS keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is turned ON.
 Should not carry the phone in a breast pocket.
 Should use the ear opposite the pacemaker to minimize the
potential for interference. If you have any reason to suspect that
interference is taking place, turn the phone OFF immediately.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment
(WEEE), which entered into force as European law on 13th
February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of
WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
The WEEE logo (shown at the left) on the product or
on its box indicates that this product must not be
discarded in a landfill. Electronic devices contain
substances that may be hazardous to the
environment if not properly disposed of. For more
information about electronic and electrical waste
equipment disposal, recovery, and collection points,
please contact your local city center, household
14 Safety and regulatory guide
waste disposal service, shop from where you
purchased the equipment, or manufacturer of the
equipment.
RoHS compliance
This product is in compliance with Directive 2011/65/EU of the
European Parliament and of the Council of 8 June 2011, on the
restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
宏達國際電子股份有限公司
HTC Corporation
23, Xinghua Rd.,
Taoyuan 330, Taiwan
DECLARATION OF CONFORMITY
Intended for use in EU
For the following equipment:
Smartphone
(Product Description)
TBD
(Product Marketing Name)
X2-HT
(Product Name)
HTC Corporation
(Manufacturer Name)
No.23, Xinghua Rd., Taoyuan Dist., Taoyuan City 330, Taiwan (R.O.C).
(Manufacturer Address)
0.96.90762.6
(Software Version)
Telefication B.V. / 0560 / Module B+C
(Notified Body Name / Number / Module Type)
Adaptor, USB cable, Earphone
(Supplied Accessories and components)
Smartphone with LTE B1, B3, B8
(Object of the Declaration)
declare under our sole responsibility that the device complies with the essential requirements of Article 3 of the
Directive 2014/53/EU, if used for its intended use and that the following standards has been applied:
1. Health (Article 3.1.a of the Directive 2014/53/EU)
Applied standard(s): EN 50360: 2001/ A1: 2012/ EN 50566: 2013/ AC:2014
EN 62479: 2010/ EN 62209-1 : 2016/ -2: 2010
2. Safety (Article 3.1.a of the Directive 2014/53/EU)
Applied standard(s): EN 60950-1: 2006 + A11: 2009 + A1: 2010+A12:2011 + A2: 2013
3. Electromagnetic compatibility (Article 3.1.b of the Directive 2014/53/EU)
Applied standard(s): Draft EN 301 489-1 V2.2.0 / -17 V3.2.0
Draft EN 301 489-3 V2.1.1/-19 V2.1.0/ -52 V1.1.0
4. Efficient use of the radio frequency spectrum (Article 3.2 of the Directive 2014/53/EU)
Applied standard(s): EN 300 328 V2.1.1/ EN 301 893 V2.1.1/ EN 300 440 V2.1.1
EN 303 413 V1.1.1/ EN 301 511 V9.0.2/ EN 300 330 V2.1.1
EN 301 908-1 V11.1.1/ -2 V11.1.1/ -13 V11.1.1
Additional Compliance:
Energy: Regulation 278/2009
Restricted Substances: EN 50581:2012, RoHS Directive 2011/65/EU
The notified body (Name:Telefication BV, ID: 0560) performed the conformity assessment according
to Annex III of the RE Directive and issued the EU-type examination certificate(Ref. No.: TBD).
Person responsible for making this declaration:
Graham Wheeler
(Name and signature)
Product Director
(Position / Title)
United Kingdom
(Place)
September,29, 2017
(Date)
16 Safety and regulatory guide
91HXXXXX-XXM Rev.A
htc.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:10:23 16:57:56+08:00
Modify Date                     : 2017:10:25 09:14:01+08:00
Metadata Date                   : 2017:10:25 09:14:01+08:00
Creator Tool                    : (Foxit Advanced PDF Editor)
Producer                        : doPDF Ver 7.2 Build 370 (Windows 7 Enterprise Edition (SP 1) - Version: 6.1.7601 (x64))
Format                          : application/pdf
Document ID                     : uuid:bc974546-bdb2-4e41-a353-8c47feb538bf
Instance ID                     : uuid:0100f6db-0d59-4d99-bfa9-89d51de2b609
ICN App Version                 : 3.05
ICN App Name                    : Foxit Advanced PDF Editor
ICN App Platform                : Windows
Page Count                      : 16
Page Layout                     : OneColumn
Creator                         : (Foxit Advanced PDF Editor)

EXIF Metadata provided by EXIF.tools