Fujitsu F07B Mobile Phone User Manual F 07B E H1 eps

Download:
Mirror Download [FCC.gov]
Document ID	1246110
Application ID	JlNE9tDeH1bdFXZJz3Glzw==
Document Description	user manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	379.93kB (4749077 bits)
Date Submitted	2010-03-01 00:00:00
Date Available	2010-06-07 00:00:00
Creation Date	2010-03-01 14:41:48
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2010-03-01 14:41:48
Document Title	F-07B_E_H1.eps
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DocMaker

F-07B_EN_FCC
Introduction
Using Open assist button
YOKO-MOTION
You can easily open the FOMA terminal by just pressing a
dedicated button.
･ Without using the open assist button, the FOMA terminal can be
opened lightly.
You can use horizontal display by rotating the display 90 degrees
to the right or left with the FOMA terminal opened. Just rotating
the display can activate 1Seg or Still camera. Also you can answer
a call by turning back to the vertical display during horizontal
display operation.
･ You can change function to be activated by rotating the display
in Turn-display option.
Point
･ It is recommended to perform with holding the FOMA terminal in your
hand. Be careful not to let the FOMA terminal hit your face, other person,
object, etc. when opening, or not to drop the FOMA terminal with the
opening rebound.
･ Depending on orientation of the FOMA terminal, it may not be fully
opened when pressing the button.
･ To close the FOMA terminal, use your hand and close it. If the FOMA
terminal is not closed completely, once open it fully and then close it
again.
Image list screen
Inbox message list screen
1Seg watching screen
Point
･ Do not rotate the display with the FOMA terminal closed. It may cause
scratch of the display or keypad.
･ If you rotate the display while displaying submenu, New Task menu or
switch menu, the menu is closed.
F-07B_EN_FCC
Precautions (ALWAYS FOLLOW THESE DIRECTIONS)
・ Before using the FOMA terminal, or when necessary, read the
DANGER
WARNING
CAUTION
This sign denotes that death or serious
injury may directly result from improper use.
This sign denotes that death or serious
injury may result from improper use.
No wet hands
No liquids
Do
Unplug
This symbol denotes that using the phone or its
components with wet hands is not allowed.
This symbol denotes that using the phone or its
components in a bathroom or other highly humid area is
not allowed.
Introduction
precautions below to ensure safe use and handling. After reading
this manual, keep it carefully.
・ These precautions are intended to protect you and others around
you. Read and follow them carefully to avoid injury, damage to the
product or damage to property.
・ The signs below differentiate between the levels of danger that can
occur if the product is not used within the specified guidelines.
This symbol denotes that an instruction must be obeyed at
all times.
This symbol denotes that the equipment should be
unplugged.
■ Precautions contain the description below.
This sign denotes that bodily injury or
damage to property may result from
improper use.
・ The symbols below show specific directions.
Handling FOMA terminal, battery pack, adapter and UIM (common)
.........................................................................................................................8
Handling FOMA terminal ..................................................................................9
Handling battery pack .....................................................................................11
Handling adapter .............................................................................................12
Handling UIM ...................................................................................................13
Handling mobile phones near electronic medical equipment .....................13
This symbol denotes that the action is prohibited.
Don’t
No disassembly
This symbol denotes that disassembling the phone or its
components is not allowed.
F-07B_EN_FCC
Introduction
Handling FOMA terminal,
battery pack, adapter and UIM
(common)
DANGER
Do not use, store, or leave the
equipment in hot areas such as near
Don’t flames or in areas under strong direct
sunlight such as inside a vehicle.
May cause the equipment to be deformed or
malfunction, and battery pack to leak, heat,
burst or ignite, and the capability or life to be
reduced or shortened. Overheating on parts
of the case may cause burns or injuries.
Do not disassemble or remodel the
equipment. Do not solder items onto
No disassembly the equipment.
May cause fire, injuries, electric shock, or
malfunction. It may also cause the battery
pack to leak, heat, burst or ignite.
WARNING
Do not put the battery pack, FOMA
terminal, adapter or UIM in
Don’t microwave ovens or other heating
appliances or high-pressure
containers.
Do
Use the battery pack and adapter
specified by NTT DOCOMO for your
FOMA terminal.
Use of equipment not specified by DOCOMO
can cause FOMA terminal, battery pack and
other parts to leak, heat, burst, catch fire or
malfunction.
1. Remove the power plug from the wall
outlet or cigarette lighter socket.
2. Turn FOMA terminal OFF.
3. Remove the battery pack from FOMA
terminal.
May cause the equipment to heat, burst or
ignite or the battery pack to leak if you keep
using the equipment.
It may cause the battery pack to leak, heat,
burst or ignite, may cause FOMA terminal or
adapter to heat, smoke, ignite, or may
damage circuits.
Do not throw the equipment or give
hard shock to it.
Don’t
May cause the battery pack to leak, heat, burst
or ignite, and the equipment to malfunction
or catch fire.
Keep conductive materials (metal
pieces, pencil lead, etc.) from coming
Don’t in contact with the charging jack or
external connection jack. Do not put
those materials inside the terminal.
May be subject to electrical short and could
cause fire or malfunction.
Do not let the equipment get wet.
Contact with water or other liquids can cause
No liquids heating, electric shock, fire, malfunctions or
injuries. Take care of the place for use and
treatment of the equipment.
Do
Do
Turn FOMA terminal OFF before
entering a place such as a gas station
where flammable gases are
generated.
Do not charge the battery. The gas
may catch fire.
When using Osaifu-Keitai in a place as a gas
station, turn OFF the terminal before using it.
(When IC card lock is activated, deactivate it
before turning OFF the terminal.)
If the equipment starts giving off a
strange smell, overheats, becomes
discolored or deformed during use,
charging or in storage, immediately
perform the following operations.
CAUTION
Do not leave the equipment on
unstable or sloping surfaces.
Don’t
May cause malfunction or injuries.
Do not store the equipment in
extremely humid, dusty or hot areas.
Don’t
Do
May cause malfunction.
Children using the equipment should
be instructed in proper operation by
an adult. Do not allow them to use the
equipment without adult supervision.
May cause injuries.
Store the equipment out of reach of
small children.
Do
May be accidentally swallowed or cause
injuries.
F-07B_EN_FCC
When you use electronic medical
equipment, do not keep the terminal
Don’t in your chest pocket or inside pocket.
If you use i-αppli, a videophone call or 1Seg
watching while charging the battery for a
long time, FOMA terminal, battery pack and
adapter may be heated.
Directly touching a hot part for a long time,
you may have redness, itching or rash on
your skin, or it may result in low-temperature
burns depending on your constitution and/or
health condition.
Using your FOMA terminal near medical
electronic equipment could cause equipment
failure.
Do not put foreign objects such as
liquid like water, metal pieces or
Don’t burnable things into UIM or microSD
card slot.
Do not turn on the light aiming
directly at the driver of the car etc.
Don’t
Do not direct the infrared data port
toward your eye and transmit signals.
Don’t
May affect your eyes. Faulty operation could
result from directing the infrared data port
toward other infrared equipment and
transmitting signals.
Do not put FOMA terminal in the place
such as the dashboard near the airDon’t bag, where the influence of air-bag
explosion is expected.
When the air-bag explodes, FOMA terminal
may hit yourself or others and could cause
injury, equipment malfunction or damage.
Too loud volume may cause a hearing loss.
And, if you cannot hear the sound around you
clearly, it may cause an accident.
May cause fire, electric shock or malfunction.
Handling FOMA terminal
WARNING
Do
Do
Do
May cause electronic equipment or electronic
medical equipment to fail or malfunction. If
the function which automatically turns the
power ON is set, cancel the setting before
turning the power OFF.
When using the phone in a medical facility, be
sure to observe the regulations of the facility.
If you do prohibited act such as using the
phone in an airplane, you may be punished
according to law.
If you have weak heart, be careful
when setting the Vibrate alert
(vibration) or alert volume setting.
Could affect heart function.
May disturb driving and cause an accident.
Turn FOMA terminal OFF in areas
where use is prohibited, such as in
airplanes and hospitals.
When you talk by setting handsfree,
always keep FOMA terminal away
from your ear.
And, when connecting the earphone/
microphone to FOMA terminal and
play a game or music, adjust the
volume moderately.
Introduction
Do
Be careful especially when using
FOMA terminal connected to the
adapter continuously for a long time.
Do
If it starts thunder while using the
terminal outdoors, turn the power
OFF immediately, and move to a safe
location.
May be subject to lightning strike and could
cause electric shock.
F-07B_EN_FCC
Introduction
Do
May cause the equipment to fail or
malfunction.
* Examples of electronic equipment to avoid.
Hearing aids, implanted pacemakers or
defibrillators, other electronic medical equipment,
fire alarms, automatic doors and other automatic
control equipment.
Users wearing implanted pacemakers or
defibrillators or other electronic medical equipment
should check with the manufacturer or sales outlet
about the effect of radio frequencies on the
equipment.
Do
When the display or camera lens is
accidentally broken, be careful of
broken glass or exposed internal parts
of FOMA terminal.
Surfaces of display and camera lens are made
of plastic panels and they are structured for
the glass not to scatter, however, if you
mistakenly touch broken or exposed parts,
you may be injured.
Do
To sound the high-pitched alarm,
always keep FOMA terminal away
from your ears.
May cause hearing loss.
10
CAUTION
Turn FOMA terminal OFF near highprecision electronic control
equipment or electronic equipment
using low-power signals.
Do not swing FOMA terminal by its
strap.
Don’t
May cause the terminal damage or failure, or
injury to yourself or others.
When using the motion tracking or
motion sensor, check the safety
Don’t around you, hold FOMA terminal
firmly, and do not shake it
unnecessarily.
The motion tracking and motion sensor are
functions to operate by tilting or shaking
FOMA terminal. There is a risk that FOMA
terminal hits people or objects around you by
shaking it too much, causing a serious
accident or damage.
If you put a metal strap or the like to
FOMA terminal, be careful not to let
Don’t the strap hit people or objects around
you when performing motion tracking
or using motion sensor.
Accidents such as injury, malfunction or
damage may result.
If the display part is accidentally
broken and liquid crystal leaks out, do
Don’t not put the liquid in your mouth,
inhale, or make contact with your skin.
If the liquid gets into your eyes or
mouth, rinse it with clean water and
see a doctor immediately.
And, if the liquid adheres to skin or
clothing, use alcohol etc. to wipe it off,
then wash with soap.
May cause loss of sight or skin problems.
Do not bring the speaker close to your
ear when the ring alert is sounding or
Don’t you are playing a melody with FOMA
terminal.
May cause hearing loss.
Do
In rare cases, using the phone in some
vehicle models can cause the vehicle's
electronic equipment to malfunction
or fail.
In this case, do not use the phone because it
may hamper safe driving.
F-07B_EN_FCC
Part
Charging
terminal
Display
Li-ion 00
Material Surface treatment
SUS
Gold plating
External
connection jack
Tinning
Movable back
panel
Paint
Screw
SWCH16 Zinc plating
Battery pack
connector jack
Beryllium Gold plating
copper
Nameplate attach PC board
place
Do
Handling battery pack
■ Check that the battery type matches the
type displayed on the battery pack label.
When opening or closing FOMA
terminal, take care not to have your
fingers or strap caught by the
terminal.
Do
May cause your eyesight to be impaired.
May cause loss of sight.
Battery type
Li-ion battery
DANGER
Do not connect a wire or other metal
objects to the jack. And, do not carry
Don’t or store FOMA terminal with objects
like a metal necklace.
WARNING
If the battery pack seems to have
abnormalities such as deformation or
Don’t scratches due to an external impact or
falling, stop using it immediately.
May cause the battery pack to leak, heat, burst
or ignite, and the equipment to malfunction
or catch fire.
May cause the battery pack to leak, heat, burst
or ignite.
Do not try to force the battery pack
onto FOMA terminal if you are having
Don’t trouble installing it. Always install it
after checking that it is correctly
oriented.
Do
Do
Do not throw the battery pack into the
fire.
Don’t
Don’t
May cause the battery pack to leak, heat, burst
or ignite.
If the battery pack leaks or gives off a
strange smell, immediately remove it
from the vicinity of open flames.
The vapors from leaking battery pack fluid
may ignite or explode.
May cause the battery pack to leak, heat, burst
or ignite.
Do not nail the battery pack, hit with
a hammer or step on it.
If the battery pack does not have a full
charge after being charged for the
specified time, stop charging it.
May cause the battery pack to leak, heat, burst
or ignite.
May cause the battery pack to leak, heat, burst
or ignite.
May cause injuries or damages.
When watching 1Seg, take a certain
distance from the display in a fully
bright place.
Do
If the battery pack's fluid contacts
eyes, immediately flush the eyes with
clean water and see a doctor right
away. Do not rub the eyes.
Introduction
Do
Mobile phones can give some users
skin problems such as itching, allergic
reactions or rashes. If you develop skin
problems, stop using the phone
immediately, and see a doctor.
FOMA terminal contains metal in
the parts below.
Be careful not to let your pet bite the
battery pack.
Do
May cause the battery pack to leak, heat, burst
or ignite, and the equipment to malfunction
or catch fire.
11
F-07B_EN_FCC
CAUTION
Introduction
Do not discard old battery packs
together with other garbage.
Don’t
May cause igniting or environmental
destruction. Tape the terminals of old battery
packs to insulate them, and then bring them
into a sales outlet such as docomo Shop. If
your local municipality has a battery recycling
program, dispose of them as provided for.
Do not charge a wet battery pack.
Don’t
Do
May cause heat generation, ignition or
rupture of the battery pack.
If the battery pack's fluid contacts skin
or clothes, immediately flush the
contacted area thoroughly with clean
water.
May hurt the skin.
Handling adapter
Always use the DC adapter with a
negative-ground vehicle. Do not plug
Don’t it into a positive-ground vehicle.
When it starts to thunder, do not
touch FOMA terminal and adapter.
Don’t
Place the adapter and desktop holder
in a stable location while charging. Do
Don’t not cover or wrap the adapter and
desktop holder with a cloth or blanket.
May cause FOMA terminal to be removed or
the optional devices to be heated, resulting in
fire or troubles.
12
Do not place heavy objects on the
adapter cord or power cord.
Don’t
May cause electric shock or fire.
Do not touch the adapter cord or
outlet with wet hands.
No wet hands May cause electric shock.
If incorrect voltage is used, this may cause fire
or failure. When using FOMA terminal
overseas, use AC Adapter for global use.
AC adapter : AC100V
DC adapter : 12 or 24V DC (specific for
negative ground vehicle)
AC adapter for global use : Between 100V and
240V AC (Connect to the AC outlet for
internal household use)
If the DC adapter's fuse blows, replace
it only with the specified fuse.
Do
May cause fire, malfunction, electric shock or
injuries.
May cause electric shock, heat or fire.
May cause electric shock.
May be subject to lightning strike and could
cause electric shock.
Do not short the charging jack while it
is connected to the outlet or cigarette
Don’t lighter socket. Do not touch the
charging jack with a part of your body
such as your hand or finger.
Do not use the adapter cord or power
cord if it gets damaged.
Do not use the AC adapter or desktop
holder in a bathroom or other highly
Don’t humid area.
Do
May cause fire.
WARNING
Don’t
Only use with the specified power
source and voltage.
Using other fuses may cause fire or
equipment failure. For the specified fuse, see
the instructions that come with the DC
adapter.
Wipe off any dust that accumulates on
the power plug.
Do
Do
May cause fire.
When you connect the AC adapter to
an outlet, make sure not to touch with
metal such as metal straps and firmly
connect to the outlet.
May cause electric shock, electrical short or
fire.
F-07B_EN_FCC
Pulling the cord could damage it, possibly
leading to electric shock or fire.
Always remove the power plug from
the outlet when not using the adapter
for an extended period.
Handling mobile phones near
electronic medical equipment
■ These precautions are based on the
guidelines produced at the Electromagnetic
Compatibility Conference Japan, regarding
the protection of electronic medical
equipment from radio waves emitted by
mobile phone units.
WARNING
Unplug May cause electric shock, fire or malfunction.
Immediately remove the power plug
from the outlet or cigarette lighter
socket if water or other fluids get into
Unplug the adapter.
Obey the following rules inside
medical facilities.
Do
･ Do not bring FOMA terminal into operating
･
･
May cause electric shock, smoke or fire.
Always remove the power plug from
the cigarette lighter socket when
cleaning the equipment.
･
Unplug May cause electric shock.
･
Handling UIM
CAUTION
Be careful of the cut surface when
removing UIM (ICs).
Do
May hurt hands or fingers.
Do
rooms (ORs), intensive care units (ICUs) or
coronary care units (CCUs).
Turn FOMA terminal OFF in hospital wards.
Turn FOMA terminal OFF in hospital
lobbies and corridors if electronic medical
equipment could be nearby.
If the medical facility has specified zones
where use or possession of mobile devices
is prohibited, obey those instructions.
If the function to automatically turn ON the
power is set, cancel the setting before
turning the power OFF.
Do
Wearers of implanted pacemakers or
defibrillators must carry and use
FOMA terminal at least 22 cm away
from the implanted device.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
Do
Introduction
Do
When you disconnect the adapter
from the outlet or cigarette lighter
socket, do not pull the adapter cord or
power cord with excessive force.
Instead, hold the power plug to
disconnect.
When electronic medical equipment
other than implanted pacemakers or
defibrillators are in use outside of
medical facilities (such as in home care
settings), check with the device
manufacturer to determine how the
device is affected by electrical signals.
FOMA terminal's signals may affect the
performance of electronic medical
equipment.
Turn FOMA terminal OFF in crowded
trains or other public places where
pacemaker or defibrillator wearers
could be nearby.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
13
F-07B_EN_FCC
Handling precautions
General
Introduction
14
・ Keep water away from the FOMA terminal.
- FOMA terminal, battery pack, adapter and UIM are not waterproof. Do not use
FOMA terminal in bathrooms or other high-humidity areas, or in the rain. When
carrying FOMA terminal in a pocket near your body, sweat may corrode the inner
components, causing malfunction. Malfunctions deemed to be caused by water
are not covered by the warranty, and may be impossible to repair. Since these
conditions are outside the scope of the warranty, a repair, if at all possible, is
charged.
・ Clean FOMA terminal with a dry soft cloth (such as a cloth for eyeglasses).
- The display of FOMA terminal may have been applied special coating to improve
clearness of the color LCD. When cleaning FOMA terminal, rubbing it roughly
with a dry cloth can scratch the display. Take care when handling the unit, and
clean it with a dry soft cloth (such as a cloth for eyeglasses). Drops of water or
dirt left on the display can cause stains or remove the coating.
- If FOMA terminal is wiped with alcohol, paint thinner, benzine or detergent, the
printing may disappear or color may fade.
・ Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may cause power to be turned
off or insufficient battery charge, so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when cleaning it.
・ Do not place FOMA terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation, causing internal
corrosion and malfunction.
・ When using, be careful not to subject excessive force to FOMA terminal or the
battery.
- If FOMA terminal is crammed into a brimming bag or placed in a pocket and sat
on, display, internal PCBs or battery pack may be damaged or malfunction. And,
if external devices are plugged into the external connection jack (earphone/
microphone jack), the breakage of the connector or malfunction may result.
・ Carefully read the separate instructions that come with FOMA terminal, adapter
and desktop holder.
・ Do not rub or scrape the display with a metal piece etc.
- It may scratch the display, causing malfunction or damage.
FOMA terminal
・ Avoid extreme temperature.
- Use FOMA terminal where the temperature ranges between 5 and 35℃ and
humidity ranges between 35 and 85%.
・ FOMA terminal may affect land-line phones, TVs or radios in use nearby, so use
it as far as possible from these appliances.
・ Maintain a separate record of the data you saved in your FOMA terminal.
- If the data is deleted, DOCOMO assumes no responsibility for the loss of any
data.
・ Do not drop FOMA terminal or subject it to shocks.
- May cause malfunction or damage.
・ Do not plug external devices into the external connection jack (earphone/
microphone jack) at a slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
・ Do not close FOMA terminal with the strap etc. held inside.
- May cause malfunction or damage.
・ It is normal for FOMA terminal to become warm during use or charging.
Continue to use it.
・ Do not leave FOMA terminal with the camera in areas under strong direct
sunlight.
- May cause discoloring or burn-in of materials.
F-07B_EN_FCC
・ FOMA terminal should normally be used with the external connection jack cap
Battery pack
・ The operation time provided by the battery pack varies by the operating
environment and battery pack's deterioration.
・ The battery pack may swell out as it comes to near the end of its lifetime
depending on the usage conditions, but it is not a problem.
・ Be careful especially about the following points when preserving or leaving the
battery pack for a long time.
- Keeping under the state of the full charge (right after charging ends)
- Keeping under the state of the empty charge (too exhausted to turn on FOMA
terminal)
They may cause the battery pack performance to be degraded or its lifetime to be
shortened.
For necessary battery level to keep for a long time, the display of battery icon is a
state of approximately 2 or 3 cells.
Introduction
closed.
- Dust and/or water brought into FOMA terminal cause troubles.
・ Do not use FOMA terminal with the back cover removed.
- It may cause the battery to come off, or may cause a malfunction or damage.
・ Do not put extremely thick stickers on the display or the key side.
- Doing so may cause malfunction.
・ Do not rotate the display with FOMA terminal closed.
- The display or keypad may be scratched and may cause malfunction or damage.
・ Do not put strong impact on the fingerprint sensor or scratch its surface.
- It may cause malfunction of fingerprint sensor and disable authentication
operation and pointing operation.
・ Clean the fingerprint sensor with a dry soft cloth (such as a cloth for eyeglasses).
- If the fingerprint sensor is dirty or water is sit on its surface, the sensor does not
read fingerprints, decreases its authentication performance, erroneously
operates authentication function with no finger on it, disables pointing
operation.
・ While microSD card is being used, do not take the card out and do not turn off
FOMA terminal.
- May cause data loss or malfunction.
・ Do not bring magnetic cards etc. close to FOMA terminal.
- Magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may
be erased.
・ Do not bring magnetized objects close to FOMA terminal.
- Bringing strong magnetism close may cause a malfunction.
Adapter
・ Charge the battery in an area within the proper ambient temperature range (535℃).
・ Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
・ It is normal for the adapter to become hot while charging. Continue to use it.
・ When using the DC adapter for charging, keep the vehicle engine running.
- The vehicle's battery could become flat.
・ When using an outlet with a mechanism preventing unplugging, follow the
handling instructions for that outlet.
・ Do not give strong shock. Do not deform the charging jack.
- May cause malfunction.
・ The battery pack is a consumable part.
- Replace the battery pack if FOMA terminal has extremely short operation time
on a full charge, though it may vary by operating conditions. Purchase a new
battery pack of the specified type.
・ Charge the battery in an area within the proper ambient temperature range (535℃).
・ Always charge before using it for the first time or after extended disuse.
15
F-07B_EN_FCC
UIM
Introduction
・ Do not use excessive force to install/remove UIM.
・ It is normal for UIM to become warm during use. Continue to use it.
・ Note that DOCOMO assumes no responsibility for malfunctions occurring as the
result of inserting and using a UIM with another IC card reader/writer.
・ Always keep UIM ICs clean.
・ Clean UIM with a soft, dry cloth (such as a cloth for eyeglasses).
・ Maintain a separate record of the data you saved in UIM.
- If the data is deleted, DOCOMO assumes no responsibility for the loss of any
data.
・ To preserve the environment, bring the old UIM to a sales outlet such as
docomo Shop.
・ Avoid extreme temperature.
・ Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
・ Do not drop UIM or subject it to shocks.
- May cause malfunction.
・ Do not bend UIM or place heavy objects on it.
- May cause malfunction.
・ Do not install UIM into FOMA terminal with a label or sticker put on UIM.
- May cause malfunction.
Bluetooth® devices
・ This FOMA terminal is equipped with the security features, that are compliant
with Bluetooth standards for communication via Bluetooth. However,
depending on the settings, there may not be enough security. Be aware of
security risks when using Bluetooth.
・ DOCOMO assumes no responsibility for any information which may be leaked
during communication via Bluetooth.
16
・ You can use handsfree, headset, audio, keyboard, dial-up connection, object
push and serial port devices with FOMA terminal. An audio/video remote
control may be available with an audio device (only Bluetooth compatible
devices).
・ Frequency bands
Frequency bands used by FOMA terminal Bluetooth function are as below.
b c
2.4FH1
a 2.4 : Radio equipment that uses the 2400 MHz band.
b FH : The modulation is the FH-SS method.
c 1 : The expected interference distance is 10 m or shorter.
: All bandwidths between 2400 MHz and 2483.5 MHz are used,
and the bandwidth used by mobile object identification devices cannot be
avoided.
Cautions on using Bluetooth devices
In the bandwidth used by this handset, in addition to home electric appliances
such as a microwave oven and industrial/scientific/medical devices, in-plant
radio stations used to identify mobile objects used in production lines of a
factory that require a license, specified low power radio stations, or amateur
radio stations that do not require a license (hereafter "other radio stations") can
be in operation.
1. Before using this terminal, check whether other radio stations are in
operation in your neighborhood.
2. If radio wave interference occurs between the terminal and "other radio
stations", use the terminal in a different location or "Turn the power OFF" to
avoid the radio wave interference.
3. For more detailed information, contact "General Inquiries" using the phone
number on the back of this manual.
F-07B_EN_FCC
FeliCa reader/writer
licenses for radio stations.
・ It uses 13.56 MHz frequency band. When using other reader/writers in your
surroundings, keep FOMA terminal away sufficiently from them. Before using
the FeliCa reader/writer, confirm that there are no radio stations using the same
frequency band nearby.
Introduction
・ FeliCa reader/writer function of FOMA terminal uses weak waves requiring no
CAUTION
・ Do not use a remodeled FOMA terminal. Using a remodeled terminal violates
the Radio Law.
FOMA terminal is certified according to technical standard conformance of
specified wireless equipment based on the Radio Law, and as a proof of it, the
"Technical Compliance Mark " is depicted on the engraved sticker of FOMA
terminal.
If you remodel FOMA terminal by removing its screws, your certification of
technical standard conformance becomes invalid.
Do not use FOMA terminal with its certification of technical standard conformance
invalid as it violates the Radio Law.
・ Be careful when you use FOMA terminal while driving a car etc.
Using a mobile phone while driving is subject to penal regulations.
If you inevitably receive a call, tell the caller that you will "call back" by handsfree,
then park in a safe place and call back.
・ Use the Bluetooth function only in Japan.
The Bluetooth function of the FOMA terminal is compliant with wireless standards
and is authorized for use only in Japan.
If you use this function overseas, you may be punished.
・ Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of FOMA terminal conforms to Japanese radio
standards.
If you use this function overseas, you may be punished.
17
F-07B_EN_FCC
Before Using
Attaching UIM (FOMA card)/battery pack
After turning power OFF, close FOMA terminal and hold it in your
hand so that you can properly attach UIM/battery pack.
✜ Removing Back Cover
Slide the back cover in the direction of the arrow by 2 mm with a
thumb to remove it.
✜ Installing battery pack
With the label side of the battery pack upward, align convex parts of
the battery pack with concave parts of FOMA terminal and slide the
battery pack in the direction of a, press the battery pack in the
direction of b to set it in.
Convex parts
Basic Operation
Press here with your thumb
Back cover
✜ Installing UIM
Pull the tab with your nail and pull out the tray until it clicks (a). Hold
UIM with the IC side down, align the beveled corner with the tray (b)
and push into the tray until it stops (c).
Tab
UIM
Battery pack
Concave parts
✜ Installing back cover
Place the 4 tabs of back cover to the notches, press back cover in the
direction of a to avoid forming any clearance between FOMA
terminal and back cover, then slide it in the direction of b to install it.
Back cover
IC
Corner cut
Tray
Point
･ UIM (blue) is not available for this FOMA terminal. If you have the UIM
(blue), bring it to a docomo Shop.
18
F-07B_EN_FCC
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
Charging using AC adapter
* Check that the light turns on.
c When charging is over, pull out the power plug from the
outlet, and pull out from FOMA terminal horizontally
while pressing the release buttons on both sides of the
connector.
a Insert the AC adapter to the attached desktop holder,
with the arrow on the AC adapters connector upward.
b Unfold the AC adapters power plug and insert it into a
100V AC outlet.
c With FOMA terminal closed, insert it into the desktop holder.
* Check that the light turns on.
d After charging is completed, remove FOMA terminal
from the desktop holder.
Basic Operation
a Open jack cap (a) of FOMA terminal, hold the
connector horizontally with the arrow side upward and
insert it to the jack. (b)
b Unfold the power plug and insert it into a 100V AC
outlet.
Using desktop holder and AC adapter in
combination for charging
AC adapter
100V AC outlet
Indicator light
Release
button
Power plug
Insert at the back side
Connector
Indicator light
Power plug
100V AC outlet
Connector
Release button
Desktop holder
External
connection jack
AC adapter
Jack cap
✜ Operations for charging
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icons on the display and the sub-display
blink. When charging is over, a charge completion alert sounds.
19
F-07B_EN_FCC
Before Using
Before Using
Turning power ON - Configuring default setting
User information
Perform the following operations after turning the power ON for
the first time.
Check your own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a f (2 sec. or more)
b "Yes" or "No" on a confirmation
screen of enlarged menu setting
a me0 User information
The screen shown to the right appears.
Basic Operation
The screen shown to the right appears.
c Set required itemseC [Complete]
Always set Change security code and
Request permit/deny. If you exit without
setting, Initial setting screen reappears
when the power is turned ON the next
time.

d g on a confirmation screen of software update
function
The stand-by display appears.
Point
･ If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or Power saving mode. The
display light turns on again if there is any operation or incoming call.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehgeg
Changing screen display to English : mehbfceSelect "English"
20

Point
Editing user information : On User information edit screen, Ce
AuthenticateeEditeC
Checking a phone number during a call : se0
F-07B_EN_FCC
Screen Explanation
Viewing display
Bottom of the display
Arrival information (Starting from the left,
missed call, recorded message, voice mail
service, unread message, unread ToruCa,
i-αppli call)
: Silent mode ON
: Call alert volume OFF
: Vibrator for voice call ON
: In Public mode (Drive mode)
: Record message ON
: Keypad dial lock ON
: GPS Request failed
: Personal data lock ON
: Music&Video Channel program
obtaining failure
: Reading UIM
: IC card lock ON
: Available multi-cursor key
: Performing 1Seg recording
reservation
: i-αppli Auto start failed
: microSD card installed during
Communication mode
: Connected to external device using
USB cable
: Pedometer/ACT monitor is set
: Software update rewrite notice
: Auto-update of latest pattern definition
failure
Basic Operation
The current state can be checked by the icon appearing on the screen. Major icons are as follows.
: Bluetooth ON
: High-pitched alarm ON
Top of the display
: The total calls cost exceeds the limit
: Unread Area Mail exists
Battery level (Battery icon)
: Bluetooth connection being
: Unread i-mode mail exists
established
: Arrival i-concier information exists
: Communication using handsfree: Unreceived i-mode mail exists in iAmple
Almost exhausted
compatible device in progress
mode Center
charge
(Charge the battery)
: Handsfree ON
: Displaying SSL/TLS page etc.
Signal strength (Antenna icon)
: Power saving mode activated
: Auto-send mail exists
: Positioning with GPS
: Music&Video Channel program
Out of service area or where
obtaining reservation exists
: Request setting
Strong
Weak
radio waves do not reach
: Lock on close or Lock when immobile
: During i-αppli operation
: Self mode ON
ON
: i-αppli call exists
: In data transfer mode
: Kid-safe mode ON
: Alarm clock ON
: Connecting to i-mode
: A phonebook entry or schedule has
: Schedule reminder ON
: Infrared communication in operation
secret attribute
: Inside OFFICEED area
21
F-07B_EN_FCC
Screen Explanation
Viewing sub-display and light
Task area
The icon indicating the function
(task) in progress appears in the
task area.
Task area
Basic Operation


✜ Switching views
Each time you press M, the view switches in the order of icon and
clock ⇒ date and clock ⇒ big clock. When "Use" is set to Set
Pedometer/Activity monitor, each time you press S, the view switches
in the order of steps ⇒ activity ⇒ clock.
✜ Arrival information
Guide area and key operation
Operations that can be performed
by pressing m, a, g, C
and I are displayed in the
guide area. To perform an
operation in the guide area, press
the corresponding key.
on the guide area corresponds
to multi-cursor keys k.
Even when FOMA terminal is closed, the
icons in the sub-display and light provide
information. When no operation is
performed for a certain period of time, the
sub-display light is turned off, but it turns on again when you press
either side key.
Guide area
When a missed call, recorded message, unread message, or voice
message of Voice Mail service, etc. exists, press D with clock
displayed to display the number of calls or messages, and then press
S to scroll reception date/time and information about the senders.
✜ Light
The light turns on or blinks when the battery charges, the camera is
activated, light alert (⇒P35) is set, etc.
Information
22
･ The light on the sub-display turns on just by tilting FOMA terminal.
【
背面自動点灯設定 (Auto light on)】
F-07B_EN_FCC
Screen Explanation
Menu operation
On the stand-by display, press m and then perform the
functions from the menu. You can select a menu item with
shortcut operations, which use the keypad, * and #, or with
multi-cursor operation, which uses the multi-cursor key to move
the cursor.
 Selecting "Calculator"
a me7e4
Multi-cursor key operations
a meMove the cursor to "g Accessory"eg [Select]
eMove the cursor to "d Calculator"eg [Select]
Point
･ Even when a function is running, you can perform the same operation if
"MENU" is displayed on the guide area.
･ To return to the previous screen, press c. To return to the stand-by
display, press f.
･ On the stand-by display with Info/calendar layout, Shortcut icons set, or
with arrival information icon or i-concier information displayed, press g
to change the display to Focus mode that allows you to quickly display the
related information.


Basic Operation
Shortcut operations
Switching menu screens
You can switch among "Kisekae menu", the design of which can be
changed using Kisekae Tool (⇒P35), "Basic menu", which has the
fixed menu numbers, and "Custom menu", to which menu items
can be saved freely.
A Kisekae menu matched with the color of FOMA terminal is set by
default.

Point
･ In some types of Kisekae menus, the menu structure is changed according
to usage frequency, or the number assigned to menu item (item number)
may not be applicable.
･ The menu that appears when m is pressed on the stand-by display can
be changed from the start menu. ⇒ P31
23
F-07B_EN_FCC
Screen Explanation
Pointing device
With the fingerprint sensor, you can operate menus or browser
screens with your finger. Pointing device operation corresponds to
multi-cursor key operation as follows.
Pointing device
Basic Operation
Slide
Keep touching the fingerprint sensor, move
your finger up, down, right or left.
Slide your finger and keep touching the
fingerprint sensor
Double-tap
Tap twice as you can put the ball of your
finger on the center of fingerprint sensor as
parallel as possible.
Keep touching the fingerprint sensor for 1
sec. or more
This operation is for the browser screen only.
Double-tap
24
Multi-cursor key
k (1 sec. or more)
Setting the pointing device
Set the effective area and speed of the pointing device.
a meh Settings & NWserviceseg Clock/Turn/
Input etc.eh Pointing deviceeSet required itemse
C [Set]
When "Not use" is set, you can use the fingerprint sensor only
for fingerprint authentication.
Point
･ You cannot operate on the stand-by display (except in Focus mode) or on
the screen while talking.
･ Operate the pointing device with a light touch. Putting your finger nail or
excessive force on the fingerprint sensor may damage it.
g (1 sec. or more)
Slide
F-07B_EN_FCC
Screen Explanation
Screen Explanation
Motion sensor
使いかたガイド (Guide)
You can operate FOMA terminal by double-tapping (tapping it
twice) or tilting it.
You can check overviews and operations of functions, and
troubleshooting. (In Japanese only)
✜ Stopping an alarm/displaying details of arrival
a mef LifeKite# GuideeSelect
a search method
information
Front
Back
Side
Side
✜ Tilting FOMA terminal
Tilting FOMA terminal while pressing and holding S or D when
Browser screen is displayed scrolls the screen or switches the vertical/
horizontal display for the clock on the sub-display.
Setting Motion sensor
目次 (Contents) : Search from a list of
functions.
索引 (Index) : Search from a list of words
sorted according to Japanese syllabary.
フリーワード検索 (Free word search) :
Enter a keyword to search for.
ブックマーク (Bookmark) : Search from a

list of registered bookmarks.
困ったときには (Troubleshooting) : Search from lists of
troubles or error messages.
Basic Operation
When FOMA terminal is closed and the alarm sounds, double-tapping
the front or back side stops the alarm. When the clock is displayed on
the sub-display, double-tapping the side displays details of arrival
information.
Point
･ On a description screen, select "この機能を使う (Use this function)" to
perform a function. Selecting a link item in "関連機能 (related functions)",
or "→コチラ (See more)" displays a corresponding description screen.
･ Terms indicated with 【 】in this manual are index terms in "Guide".
a meh Settings & NWserviceseg Clock/Turn/
Input etc.eg Motion sensoreSet required itemse
C [Set]
Information
･ You can also access フリーワード検索 from クイック検索. ⇒P106
25
F-07B_EN_FCC
Caller ID notification (At subscription : Notify)
You can notify your phone number (caller ID) to the other party's
terminal when making a voice call.
Basic Operation
a meh Settings & NWserviceseh NW
Servicesed Caller IDea Caller ID notificationea
Activate/Deactivateea Notify
Select "b Not notify" if you do not want to inform.
Point
･ Caller ID is your important personal information. Carefully consider
whether you want to include caller ID information when making a call.
･ If an announcement of requesting caller ID is heard when making a call,
make a call again after setting Caller ID notification or adding prefix "186".
26
F-07B_EN_FCC
Appendix
Specific absorption rate (SAR) of mobile phone
This model phone FOMA F-07B meets the MIC's*1 technical regulation
governing exposure to radio waves.
The technical regulation established permitted levels of radio frequency
energy, based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The regulation employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)*2 averaged
over 10 grams of tissue. The limit includes a substantial safety margin designed
to assure the safety of all persons, regardless of age and health. The value of
the limit is equal to the international guidelines recommended by ICNIRP.*3
All phone models should be confirmed to comply with the regulation, before
they are available for sale to the public. The highest SAR value for this FOMA
F-07B is 1.140W/kg. It was taken by the Telecom Engineering Center (TELEC).
The test for SAR was conducted according to the MIC testing procedure using
standard operating positions with the phone transmitting at its highest
permitted power level in all tested frequency bands. While there may be
differences between the SAR levels of various phones and at various positions,
they all meet the MIC's technical regulation. Although the SAR is determined at
the highest certified power level, the actual SAR of the phone during operation
can be well below the maximum value.
For further information about SAR, please see the websites below.
Others
138
World Health Organization (WHO) :
http://www.who.int/peh-emf/
ICNIRP :
http://www.icnirp.de/
MIC :
http://www.tele.soumu.go.jp/e/ele/body/index.htm
TELEC :
http://www.telec.or.jp/ENG/Index_e.htm
NTT DOCOMO :
http://www.nttdocomo.co.jp/english/product/
FUJITSU LIMITED :
http://www.fmworld.net/product/phone/sar/
*1 Ministry of Internal Affairs and Communications.
*2 The technical regulation is provided in Article 14-2 of the Ministry Ordinance
Regulating Radio Equipment.
*3 International Commission on Non-Ionizing Radiation Protection.
Declaration of Conformity
The product "F-07B" is declared to conform with the essential requirements of
European Union Directive 1999/5/EC Radio and Telecommunications Terminal
Equipment Directive 3.1(a), 3.1(b) and 3.2.The Declaration of Conformity can be
found on http://www.fmworld.net/product/phone/doc/.
This mobile phone complies with the EU requirements for exposure to radio
waves.
Your mobile phone is a radio transceiver, designed and manufactured not to
exceed the SAR* limits** for exposure to radio-frequency(RF) energy, which
SAR* value, when tested for compliance against the standard was 0.997W/Kg.
While there may be differences between the SAR* levels of various phones and
at various positions, they all meet*** the EU requirements for RF exposure.
The exposure standard for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/
Kg) averaged over ten grams of tissue, recommended by The Council of the
European Union. The limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
*** Tests for SAR have been conducted using standard operation positions with
the phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a base station antenna, the lower the
power output.
F-07B_EN_FCC
Federal Communications Commission (FCC)
Notice
･ This device complies with part 15 of the FCC rules.
･
Operation is subject to the following two conditions :
a this device may not cause harmful interference, and
b this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications made in or to the radio phone, not expressly
approved by the manufacturer, will void the user's authority to operate the
equipment.
FCC RF Exposure Information
Others
This model phone meets the U.S. Government's requirements for exposure to
radio waves.
This model phone contains a radio transmitter and receiver. This model phone
is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy as set by the FCC of the U.S. Government. These
limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that
were developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR limit set
by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating
positions as accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output level of the phone.
Before a phone model is available for sale to the public, it must be tested and
certified to prove to the FCC that it does not exceed the limit established by the
U.S. government-adopted requirement for safe exposure. The tests are
performed on position and locations (for example, at the ear and worn on the
body) as required by FCC for each model. The highest SAR value for this model
phone as reported to the FCC, when tested for use at the ear, is 1.150W/kg, and
when worn on the body, is 0.773W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and FCC
requirements).
While there may be differences between the SAR levels of various phones and
at various positions, they all meet the U.S. government requirements.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file with the FCC and
can be found under the Equipment Authorization Search section at http://
www.fcc.gov/oet/ea/fccid/ (please search on FCC ID VQK-F07B).
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product
or when used with an accessory that contains no metal and which positions the
handset at a minimum distance of 1.5 cm from the body.
* In the United States, the SAR limit for wireless mobile phones used by the general public
is 1.6 Watts/kg (W/kg), averaged over one gram of tissue. SAR values may vary
depending upon national reporting requirements and the network band.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
139
F-07B_EN_FCC
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important Safety Information
Others
140
AIRCRAFT
Switch off your wireless device when boarding an aircraft or whenever you are
instructed to do so by airline staff. If your device offers flight mode or similar
feature consult airline staff as to whether it can be used on board.
DRIVING
Full attention should be given to driving at all times and local laws and
regulations restricting the use of wireless devices while driving must be
observed.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in
hospitals, clinics or health care facilities. These requests are designed to
prevent possible interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio
equipment in locations with flammable material and chemicals. Switch off your
wireless device whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal
medical devices, such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15 cm be
maintained between a mobile phone and a pace maker to avoid potential
interference with the pacemaker. To achieve this use the phone on the opposite
ear to your pacemaker and does not carry it in a breast pocket.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
For other Medical Devices :
Please consult your physician and the device manufacturer to determine if
operation of your phone may interfere with the operation of your medical
device.
F-07B_EN_FCC
Appendix
Appendix
Export Administration Regulations
Intellectual Property Right
This product and its accessories may be under coverage of the Export
Administration Regulations of Japan ("Foreign Exchange and Foreign Trade
Control Laws" and the related laws and regulations). And, they are also under
coverage of Export Administration Regulations of the U.S. When exporting
and reexporting this product and its accessories, take necessary procedures
on your responsibility and expense. For details, contact Ministry of Economy,
Trade and Industry of Japan or US Department of Commerce.
Copyrights and portrait rights
Except for the case protected by copyright laws such as personal use, use of
FOMA terminal to reproduce, alter, or publicly transmit recorded pictures or
sounds, or copyrighted text, images, music or software downloaded from
websites without the copyright holder's authorization is prohibited.
Note that taking photos or recordings at some demonstrations, performances
or exhibitions may be prohibited even when only for personal use.
Avoid taking pictures of others with FOMA terminal without their consent or
disclosing recorded pictures of others without their consent to general public
through Internet websites etc., because they may infringe on portrait rights.
Trademarks
Others
Company and product names mentioned in this manual are trademarks or
registered trademarks of their respective holders.
･ "FOMA", "i-motion", "i-mode", "i-αppli", "mopera", "WORLD CALL", "WORLD
WING", "Deco-mail", "Chara-den", "ToruCa", "2in1", "DCMX", "OFFICEED",
"docomo STYLE series" and logos of "FOMA", "i-mode", "i-αppli",
"Music&Video Channel" and "iC" are trademarks or registered trademarks of
NTT DOCOMO.
･ Microsoft®, Windows®, Windows Vista®, Windows Media® and
PowerPoint® are trademarks or registered trademarks of "Microsoft
Corporation" in the US and other countries.
･ Microsoft Excel and Microsoft Word are product names of Microsoft
Corporation in the U.S.A. In this manual, they may be described as Excel and
Word.
･ "Multitask" is a registered trademark of NEC Corporation.
･ "Catch Phone (Call Waiting Service)" is a registered trademark of Nippon
Telegraph and Telephone Corporation.
･ Free Dial logo mark is a registered trademark of NTT Communications
Corporation.
･ Java and all Java-related trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the US and other countries.
141
F-07B_EN_FCC
･ This product contains NetFront Browser,
･
･
Others
･
･
･
･
･
･
･
･
142
NetFront Sync Client of ACCESS CO., LTD.
ACCESS, the ACCESS logo and NetFront are trademarks or registered
trademarks of ACCESS CO., LTD. in the United States, Japan and/or other
countries.
Copyright© 2009 ACCESS CO., LTD. All rights reserved.
Powered by JBlend™ Copyright 2002-2009 Aplix Corporation. All
rights reserved.
JBlend and JBlend-related trademarks are trademarks or registered
trademarks of Aplix Corporation in Japan and other countries.
This product contains Adobe® Flash® Lite® and Adobe Reader® LE
technology of Adobe Systems Incorporated.
Adobe Flash Lite Copyright© 2003-2010 Adobe Systems Incorporated. All
rights reserved.
Adobe Reader Mobile Copyright© 1993-2010 Adobe Systems Incorporated.
All rights reserved.
Adobe, Adobe Reader, Flash and Flash Lite are either
registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
QR code is a registered trademark of Denso Wave Inc.
microSDHC logo is a trademark of D-3C,LLC.
FeliCa is a registered trademark of Sony Corporation.
"CROSS YOU" is a trademark of Sony Corporation.
is a registered trademark of FeliCa Networks, Inc.
Word, Excel and PowerPoint file display technologies
are powered by Picsel Technologies.
Picsel, Picsel File Viewer and the Picsel cube logo are trademarks or
registered trademarks of Picsel Technologies.
McAfee® is registered trademarks or trademarks of McAfee, Inc. and/or its
affiliates in the US and/or other countries.
G-GUIDE, G-GUIDE MOBILE and their logos are registered
trademarks in Japan of U.S. Gemstar-TV Guide International, Inc.
and/or its affiliates.
･ QuickTime is a registered trademark of Apple Inc. in the US and other
countries.
･ ATOK + APOT of Justsystem Corporation is installed in this product as
･
･
･
･
･
･
･
･
･
･
･
･
Japanese character conversion function.
"ATOK" "APOT (Advanced Prediction Optimization Technology)" are
registered trademarks of Justsystem Corporation.
This equipment is provided with the software licensed by Symbian Software
and Symbian OS are trademarks of
Ltd. or the licensor©1998-2010.
Symbian Ltd. or the licensor.
"Privacy mode" is a registered trademark of FUJITSU LIMITED.
Bluetooth® and its logo are registered trademarks of Bluetooth SIG, Inc., and
NTT DOCOMO uses them under license. Other trademarks and names inhere
to their respective owners.
Napster is a registered trademark of Napster, LLC. and/or its affiliates in the
US and/or other countries.
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
"Uni-Type" is a registered trademark of LIM Corp., Ltd.
FrameSolid is the registered trademark of Morpho, Inc. in Japan and other
countries.
The auto object tracking technology utilized is TrackSolid™, a product of
Morpho, Inc. TrackSolid™ is trademark of Morpho, Inc.
Google is registered trademark of Google Inc.
ズーキーパー (Zookeeper) is a trademark or registered trademark of
KITERETSU Inc.
"日英版しゃべって翻訳 for F (J-E Speech Translation for F)" is trademark of
ATR-Trek.
Other company and product names mentioned in this manual are
trademarks or registered trademarks of their respective holders.
F-07B_EN_FCC
･ The abbreviations of operating systems (Japanese versions) below are used
･ Content owners use Windows Media digital rights management technology
in this manual.
- Windows 7 stands for Microsoft® Windows® 7(Starter, Home Basic, Home
Premium, Professional, Enterprise Ultimate).
- Windows Vista stands for Windows Vista® (Home Basic, Home Premium,
Business, Enterprise and Ultimate).
- Windows XP indicates the Microsoft® Windows® XP Professional
operating system or Microsoft® Windows® XP Home Edition operating
system.
(WMDRM) to protect their intellectual property, including copyrights. This
device uses WMDRM software to access WMDRM-protected content. If the
WMDRM software fails to protect the content, content owners may ask
Microsoft to revoke the software's ability to use WMDRM to play or copy
protected content. Revocation does not affect unprotected content. When
downloading licenses for protected content, you agree that Microsoft may
include a "Revocation List" with the licenses. Content owners may require
you to upgrade WMDRM to access their content. If you decline an upgrade,
you cannot access a content that requires the upgrade.
Others
･ FeliCa is a contactless IC card technology developed by Sony Corporation.
･ This product contains a module developed by the Independent JPEG Group.
･ The image interpolation technology utilized is FrameSolid, a product of
Morpho, Inc.
･ This product is equipped with the technologies of GestureTek, Inc.
Copyright© 2006-2010, GestureTek, Inc. All Rights Reserved.
･ "学研モバイル国語辞典 (Gakken Mobile JpnDic)", "学研モバイル和英辞典
･
Others
(Gakken Mobile JE Dic)", "学研モバイル英和辞典 (Gakken Mobile EJ Dic)", "今
日は何の日 (Today's trivia)" and "今日の歴史 (Today in history)" are
copyrighted by GAKKEN CO., LTD.
This product is licensed based on MPEG-4 Visual Patent Portfolio License.
The use of MPEG-4 Video Codec function is allowed for personal and
nonprofit use only in the cases below.
- Recording moving pictures and i-motion that conform to MPEG-4 Visual
Standard (hereinafter referred to as MPEG-4 Video)
- Playing MPEG-4 Videos recorded personally by consumers not engaged in
profit activities
- Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA
For further utilizing such as promotion, in-house use or profit-making
business, please contact MPEG LA, LLC in U.S.
143
General Inquiries 
0120-005-250 (toll free)
* Service available in: English, Portuguese, Chinese, Spanish, Korean.
* Available from mobile phones and PHSs.
■ From DOCOMO mobile phones
(In Japanese only)
■ From land-line phones
(In Japanese only)
(No prefix) 151 (toll free)
Repairs
■ From DOCOMO mobile phones
(In Japanese only)
(No prefix) 113 (toll free)
* Unavailable from land-line phones, etc.
■ From land-line phones
(In Japanese only)
0120-800-000 (toll free)
* Available from mobile phones and PHSs.
0120-800-000 (toll free)
* Unavailable from land-line phones, etc. * Available from mobile phones and PHSs.
● Please confirm the phone number before you dial.
● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site.
NTT DOCOMO website http://www.nttdocomo.co.jp/english/
i-mode site iMenu⇒お客様サポート (user support)⇒ドコモショップ (docomo Shop) * In Japanese only
Loss or theft of FOMA terminal or payment of cumulative cost overseas

(available 24 hours a day)
(available 24 hours a day)
■ From DOCOMO mobile phones
International call access code
for the country you stay
■ From DOCOMO mobile phones
-81-3-6832-6600 (toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※If you use F-07B, you should dial the number ＋81-3-6832-6600 (to enter '＋',
press and hold the '0' key for at least one second).
■ From land-line phones 
International prefix number
for the universal number
Failures encountered overseas

-800-0120-0151*
International call access code
for the country you stay
-81-3-6718-1414* (toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※If you use F-07B, you should dial the number ＋81-3-6718-1414 (to enter '＋',
press and hold the '0' key for at least one second).
■ From land-line phones 
International prefix number
for the universal number
-800-5931-8600*
* You might be charged a domestic call fee according to the call rate for the country you stay.
* You might be charged a domestic call fee according to the call rate for the country you stay.
※For international call access codes for major countries/international prefix numbers
※For international call access codes for major countries/international prefix numbers
for the universal number, refer to DOCOMO International Services website.
for the universal number, refer to DOCOMO International Services website.
● If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal.
● If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.
Don't forget your mobile phone ･･･ or your manners!
To prevent damage to the environment,
bring used battery packs to a docomo
service counter, a docomo agent or a
recycle center.
When using your mobile phone in a public place, don't forget to
show common courtesy and consideration for others around you.
’10.5 (1st Edition)
CA92002-6052

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : DocMaker
Create Date                     : 2010:03:01 14:41:48+09:00
Modify Date                     : 2010:03:01 14:41:48+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2010:03:01 14:41:48+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : F-07B_E_H1.eps
Creator                         : DocMaker
Document ID                     : uuid:36ec1980-9f6b-4c14-825b-d9825a87669f
Instance ID                     : uuid:dceafcad-b90f-4099-99aa-e1d3670f5512
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Page Count                      : 28

EXIF Metadata provided by EXIF.tools