Fujitsu F08B Mobile Phone User Manual L01

Download:
Mirror Download [FCC.gov]
Document ID	1260987
Application ID	4BE+iqol4fvXBPubaxR7sA==
Document Description	user manual3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.47kB (2605870 bits)
Date Submitted	2010-04-02 00:00:00
Date Available	2010-06-16 00:00:00
Creation Date	2010-03-18 11:24:26
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2010-04-02 15:29:16
Document Title	L01.fm
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DocMaker

F-08B_EN_FCC
Waterproofness
FeliCa reader/writer
licenses for radio stations.
・ It uses 13.56 MHz frequency band. When using other reader/writers in your
surroundings, keep FOMA terminal away sufficiently from them. Before using
the FeliCa reader/writer, confirm that there are no radio stations using the same
frequency band nearby.
CAUTION
・ Do not use a remodeled FOMA terminal. Using a remodeled terminal violates
the Radio Law.
FOMA terminal is certified according to technical standard conformance of
specified wireless equipment based on the Radio Law, and as a proof of it, the
"Technical Compliance Mark " is depicted on the engraved sticker of FOMA
terminal.
If you remodel FOMA terminal by removing its screws, your certification of
technical standard conformance becomes invalid.
Do not use FOMA terminal with its certification of technical standard conformance
invalid as it violates the Radio Law.
・ Be careful when you use FOMA terminal while driving a car etc.
Using a mobile phone while driving is subject to penal regulations.
If you inevitably receive a call, tell the caller that you will "call back" by handsfree,
then park in a safe place and call back.
・ Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of FOMA terminal conforms to Japanese radio
standards.
If you use this function overseas, you may be punished.
Introduction
・ FeliCa reader/writer function of FOMA terminal uses weak waves requiring no
F-08B is provided with the following waterproofness by firmly
closing the external connection jack cap, installing the back cover
and locking the cover.
・ IPX5 (Former JIS protection code 5)*1
・ IPX8*3 that is a higher standard than IPX7 (former JIS protection
code 7)*2
*1 Code IPX5 means that a phone keeps functioning after directly applying a
jet flow of 12.5 L/min. for at least 3 minutes from a distance of 2.5-3 m on a
rotating turntable.
*2 Code IPX7 means that a phone keeps functioning after it is slowly
submerged to depth of 1 m in static tap water at room temperature, left there
for 30 minutes and then taken out.
*3 Code IPX8 means that it provides waterproofness of which exceeds of IPX7
standard.
F-08B provides the following waterproof performances of IPX8.
･ F-08B keeps functioning after it is slowly submerged to depth of 1.5
m in static tap water at room temperature, left there for 30 minutes
and then taken out.
･ The mobile phone keeps shooting still images or moving pictures in
30 minutes in static tap water at room temperature.
15
F-08B_EN_FCC
✜ What you can do with waterproofness of F-08B
・ You can talk or watch 1Seg programs without using an umbrella in
Introduction
16
the rain (for rainfall of 20 mm or less per hour).
- When your hands or FOMA terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
・ You can also shoot still images and moving pictures in the pool
depth of 1.5 m.
- Do not perform other operations underwater than shooting still
images and moving pictures.
- If you put the terminal in water of swimming pool, be sure to have
it within 30 minutes.
- If FOMA terminal gets wet with water from the swimming pool,
wash it in after-mentioned procedure and drain the water as
predefined (⇒P18).
・ You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the terminal in
hot water. Doing so may cause malfunction.
- Never put FOMA terminal in hot spring water or water containing
soap, detergent or bath powder.
・ You can immerse FOMA terminal in static water of wash bowl and
wash dirt out with shaking the terminal.
- Install the back cover and with it locked, holding the external
connection jack cap not to be opened and wash it with your hands
not using brush, sponge, etc.
To ensure waterproofness
To avoid water ingress, be sure to observe the points below.
・ Do not throw any liquid other than room-temperature tap water on
FOMA terminal, or soak it in such liquid.
・ Open/close the external connection jack cap as described below.

Place your finger at groove on the hinge side to open the cap.
Groove on the hinge side

Close with the tab for the back cover at the rear side of the cap fitted
into the concave of this terminal. Make sure that the cap is
completely closed without slack.
Tab on the back
side cover
F-08B_EN_FCC
・ Install the back cover as described below.
Back cover
・ The external connection jack cap and the rubber packing of the inner
lid play an important role for keeping waterproof performance. Do
not remove or scratch it. Also, prevent dust from adhering to it.
To keep the FOMA terminal waterproof, replacement of parts is
required every 2 years regardless of whether FOMA terminal appears
normal or abnormal. DOCOMO replaces the parts as a chargeable
service. Bring FOMA terminal to a sales outlet such as a DOCOMOspecified repair office.
Introduction

Align 8 tabs of the back cover with concaves of FOMA terminal.
While pressing the back cover in the direction of a so that there is
no gap between FOMA terminal and back cover, slide the back cover
in the direction of b to install, then slide the back cover lever in the
direction of c to lock.
Important precautions
Do not perform actions shown in the illustrations below.

Lever
* Make sure that the back cover is completely closed without slack. Slide the
back cover in the direction of the arrow shown on the lever, and then make
sure the cover is securely locked before using.
・ Securely lock the back cover and firmly close the external connection
jack cap. Even a fine obstacle (one hair, one grain of sand, tiny fiber,
etc.) put between contact surfaces may allow water to enter.
・ Do not poke the microphone, earpiece or speaker with a swab or
sharp object.
・ Do not let FOMA terminal fall. It may become scratched causing the
waterproof performance to degrade.
Using Soap/Detergent/ Applying strong water flow
Bath power
Soaking in ocean water
Using in hot spring
Soiling with sand/mud
Observe the following precautions to use FOMA terminal properly.
・ Accessories and optional devices are not waterproof. When
watching 1Seg etc. with FOMA terminal installed in the included
desktop holder, do not use it in a bath room, shower room, kitchen
or lavatory even if it is not connected to the AC adapter.
17
F-08B_EN_FCC
・ Do not apply water flow stronger than allowed (⇒P15) (e.g., such
Introduction
18
water flow that gives you pain when applied to your skin directly
from a faucet or shower). F-08B provides the following waterproof
performances of IPX5. However, it causes malfunction.
・ Do not put FOMA terminal in hot water, use it in a sauna or apply hot
airflow (from a hair dryer etc.) to it.
・ Do not move in water or slam the terminal against the surface of
water with FOMA terminal opened.
・ If you put the terminal in tap water or in water of swimming pool, be
sure to have it within 30 minutes.
・ When you use the terminal in swimming pool, obey rules of the
facility.
・ FOMA terminal does not float on water.
・ Do not leave water on FOMA terminal. May short-circuit the power
jacks, or in a cold region, water may freeze causing malfunction.
・ Do not leave water on the microphone, earpiece or speaker. Such
water may interfere with talking.
・ If the back cover is damaged, replace it. Water may enter inside from
a damaged section causing troubles such as electric shocks or
corrosion of the battery.
・ If FOMA terminal gets wet with water or other liquids with the
external connection jack cap or back cover open, the liquid may get
inside the terminal causing electric shocks or malfunction. Stop
using FOMA terminal, turn the power OFF, remove the battery pack
and contact a DOCOMO-specified repair office.
・ If rubber gasket on the external connection jack cap or inner lid is
damaged or deformed, replace it at DOCOMO-specified repair office.
DOCOMO does not guarantee actual operations under all states.
Malfunctions deemed to be caused by inappropriate operation by the
customer are not covered by the warranty.
Draining the water from FOMA terminal
When FOMA terminal is wet, water may flow out after wiping it off;
drain the water in the following steps.
a Wipe FOMA terminal surface with dry, clean cloth etc.
F-08B_EN_FCC
b Shake FOMA terminal approximately 20 times, firmly holding its
hinge section, until there is no more water splattering.
Around the inner lid
Introduction
To drain water off the speaker, shake
FOMA terminal with the speaker upward
d Remove the back cover and wipe off any drops of water around
the inner lid and the rear side of the back cover. Never open the
inner lid. After wiping off the water, install and lock the back
cover.
Removing back cover ⇒P21
c Softly press dry, clean cloth etc., against FOMA terminal to wipe
off water remaining in the microphone, earpiece, speaker, keys,
hinges or charging jack.
Rear side of the back cover
e Wipe off water drained from FOMA terminal with dry, clean cloth
etc., and dry naturally.
･ Water, if any, remaining in FOMA terminal may ooze up after
wiping off.
･ Do not wipe off water remaining in concaves directly with a cotton
swab etc.
19
F-08B_EN_FCC
Charging
Introduction
20
Check the following before and after charging.
・ Check that FOMA terminal is not wet. Never try to charge the battery
pack when FOMA terminal is wet.
・ Accessories and optional devices are not waterproof.
・ When charging the battery when or after FOMA terminal is wet,
adequately drain it and wipe off water with a dry, clean cloth etc.,
before connecting the included desktop holder or opening the
external connection jack cap.
・ When the external connection jack cap is opened for charging, close
the cap firmly after charging. It is recommended that the desktop
holder be used for charging to prevent water from seeping inside
from the external connection jack.
・ Do not use the AC adapter or desktop holder in a bathroom, shower
room, kitchen, lavatory or other highly humid area. May cause fire or
electric shock.
・ Do not touch the AC adapter or desktop holder with wet hands. May
cause electric shock.
F-08B_EN_FCC
Before Using
Attaching UIM (FOMA card)/battery pack
After turning power OFF, close FOMA terminal and hold it in your
hand so that you can properly attach UIM/battery pack.
✜ Removing Back Cover
Slide the lever in the direction of a to unlock, pressing the back cover with a
thumb and slide approximately ● mm in the direction of b to remove. Pinch
the tab of inner lid and hold it up in the direction of c to open until it stops.
✜ Installing battery pack
With the label side of the battery pack upward, align convex parts of the battery pack
with concave parts of FOMA terminal and slide the battery pack in the direction of
a, press the battery pack in the direction of b to set it in and close the inner lid.
Convex parts
Concave parts
Battery pack
✜ Installing back cover
Back cover
✜ Installing UIM
Place the 4 tabs of back cover to the notches, press back cover in the
direction of a to avoid forming any clearance between FOMA
terminal and back cover, then slide it in the direction of b to install it.
Pull the tab with your nail and pull out the tray until it clicks (a). Hold
UIM with the IC side down, align the beveled corner with the tray (b)
and push into the tray until it stops (c).
Basic Operation
Press here with your thumb
Lever
Back cover
Tab
UIM
Lever
IC
Point
･ The inner lid is designed to be closed firmly to maintain waterproofness.
Tray
Corner cut
Point
･ UIM (blue) is not available for this FOMA terminal. If you have the UIM
(blue), bring it to a docomo Shop.
Note that forcibly opening may hurt your nail or finger.
･ To avoid damage by forcible opening, hinge of the inner lid (joint part to
terminal body) is designed to be removed. If it is removed, align the pin metal
of the inner lid with groove of FOMA terminal and push it until it clicks.
21
F-08B_EN_FCC
Before Using
Charging
The battery pack does not have a full charge at time of purchase.
Use AC adapter for FOMA terminal to charge the battery before
using FOMA terminal.
Using desktop holder and AC adapter in
combination for charging
Basic Operation
a Insert the AC adapter to the attached desktop holder,
with the arrow on the AC adapters connector upward.
b Unfold the AC adapters power plug and insert it into a
100V AC outlet.
c With FOMA terminal closed, insert it into the desktop holder.
* Check that the light turns on.
Charging using AC adapter
a Open jack cap (a) of FOMA terminal, hold the
connector horizontally with the arrow side upward and
insert it to the jack. (b)
b Unfold the power plug and insert it into a 100V AC
outlet.
* Check that the light turns on.
c When charging is over, pull out the power plug from
the outlet, and pull out from FOMA terminal
horizontally while pressing the release buttons on both
sides of the connector.
d After charging is completed, remove FOMA terminal
from the desktop holder.
AC adapter
100V AC outlet
Light
Power plug
Light
100V AC outlet
Connector
Release
buttons
Power plug
Insert at the back side
Connector
Release buttons
External
connection
Jack cap
jack
AC adapter
✜ Operations for charging
22
Desktop holder
When charging starts, a charge start alert sounds. While charging, the
light turns on and the battery icons on the display and the sub-display
blink. When charging is over, a charge completion alert sounds.
F-08B_EN_FCC
Before Using
Before Using
Turning power ON - Configuring default setting
User information
Perform the following operations after turning the power ON for
the first time.
Check your own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a f (2 sec. or more)
b "Yes" or "No" on a confirmation
screen of enlarged menu setting
a me0 User information
The screen shown to the right appears.
Basic Operation
The screen shown to the right appears.
c Set required itemseC
[Complete]
Always set Change security code and
Request permit/deny. If you exit without
setting, Initial setting screen reappears
when the power is turned ON the next
time.

d g on a confirmation screen of software update
function
The stand-by display appears.

Point
Editing user information : On User information edit screen, Ce
AuthenticateeEditeC
Checking a phone number during a call : se0
Point
･ If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or Power saver setting. The
display light turns on again if there is any operation or incoming call.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehgeg
Changing screen display to English : mehbfceSelect "English"
23
F-08B_EN_FCC
Screen Explanation
Viewing display
Basic Operation
The current state can be checked by the icon appearing on the screen. Major icons are as follows.
: The total calls cost exceeds the limit
: Unreceived i-mode mail exists in iTop of the display
: Communication using handsfreemode Center
Battery level (Battery icon)
: Displaying SSL/TLS page etc.
compatible device in progress
: Handsfree ON
: Auto-send mail exists
: eco mode ON
: Music&Video Channel program
Ample
Almost exhausted
: Lock on close or Lock when immobile
obtaining reservation exists
charge
(Charge the battery)
ON
: During i-αppli operation
Signal strength (Antenna icon)
: Kid-safe mode ON
: i-αppli call exists
: A phonebook entry or schedule has
: Alarm clock ON
Out of service area or where
secret attribute
: Schedule reminder ON
Strong
Weak
radio waves do not reach
: High-pitched alarm ON
: Inside OFFICEED area
: Self mode ON
: Unread Area Mail exists
: In data transfer mode
: Unread i-mode mail exists
: Connecting to i-mode
: Arrival i-concier information exists
: Infrared communication in operation
Bottom of the display
24
Arrival information (Starting from the left,
missed call, recorded message, voice mail
service, unread message, unread ToruCa,
i-αppli call)
: Silent mode ON
: Call alert volume OFF
: Vibrator for voice call ON
: In Public mode (Drive mode)
: Record message ON
: Keypad dial lock ON
: Personal data lock ON
: Music&Video Channel program
obtaining failure
: Reading UIM
: IC card lock ON
: Available multi-cursor key
: Performing 1Seg recording reservation
: i-αppli Auto start failed
: microSD card installed during
Communication mode
: Connected to external device using
USB cable
: Pedometer/ACT monitor is set
: Software update rewrite notice
: Auto-update of latest pattern definition
failure
F-08B_EN_FCC
Screen Explanation
Viewing sub-display and light
Task area
The icon indicating the function
(task) in progress appears in the
task area.
Task area

Each time you press M, the view switches in the order of icon and
clock ⇒ date and clock ⇒ big clock. When "Use" is set to Set
Pedometer/Activity monitor, each time you press S, the view switches
in the order of steps ⇒ activity ⇒ clock.
✜ Arrival information
Guide area and key operation
Operations that can be performed
by pressing m, a, g, C
and I are displayed in the
guide area. To perform an
operation in the guide area, press
the corresponding key.
on the guide area corresponds
to multi-cursor keys k.
✜ Switching views
Guide area
Basic Operation

Even when FOMA terminal is closed, the
icons in the sub-display and light provide
information. When no operation is
performed for a certain period of time, the
sub-display light is turned off, but it turns on again when you press
either side key.
When a missed call, recorded message, unread message, or voice
message of Voice Mail service, etc. exists, press D with clock
displayed to display the number of calls or messages, and then press
S to scroll reception date/time and information about the senders.
✜ Light
The light turns on or blinks when the battery charges, the camera is
activated, light alert (⇒P39) is set, etc.
Information
･ The light on the sub-display turns on just by tilting FOMA terminal.
【
背面自動点灯設定 (Auto light on)】
25
F-08B_EN_FCC
Screen Explanation
Menu operation
On the stand-by display, press m and then perform the
functions from the menu. You can select a menu item with
shortcut operations, which use the keypad, * and #, or with
multi-cursor operation, which uses the multi-cursor key to move
the cursor.
 Selecting "Calculator"
Basic Operation
Shortcut operations
a me7e4
a meMove the cursor to "g Accessory"eg
[Select]
eMove the cursor to "d Calculator"eg [Select]
Point
･ Even when a function is running, you can perform the same operation if
"MENU" is displayed on the guide area.
･ To return to the previous screen, press c. To return to the stand-by
display, press f.
･ On the stand-by display with Info/calendar layout, Shortcut icons set, or
with arrival information icon or i-concier information displayed, press g
to change the display to Focus mode that allows you to quickly display the
related information.
Multi-cursor key operations
26
Switching menu screens
You can switch among "Kisekae menu", the design of which can be
changed using Kisekae Tool (⇒P39), "Basic menu", which has the
fixed menu numbers, and "Custom menu", to which menu items
can be saved freely.
A Kisekae menu matched with the color of FOMA terminal is set by
default.



Point
･ In some types of Kisekae menus, the menu structure is changed according
to usage frequency, or the number assigned to menu item (item number)
may not be applicable.
･ The menu that appears when m is pressed on the stand-by display can
be changed from the start menu. ⇒ P35
F-08B_EN_FCC
Screen Explanation
Screen Explanation
Motion sensor
使いかたガイド (Guide)
You can operate FOMA terminal by double-tapping (tapping it
twice) or tilting it.
You can check overviews and operations of functions, and
troubleshooting. (In Japanese only)
✜ Stopping an alarm/displaying details of arrival
a mef LifeKite* GuideeSelect
a search method
information
Front
Back
Side
✜ Tilting FOMA terminal
Side
Tilting FOMA terminal while pressing and holding S or D when
Browser screen is displayed scrolls the screen or switches the
orientation of view for the clock on the sub-display.
Setting Motion sensor
目次 (Contents) : Search from a list of
functions.
索引 (Index) : Search from a list of words
sorted according to Japanese syllabary.
フリーワード検索 (Free word search) :
Enter a keyword to search for.
ブックマーク (Bookmark) : Search from a

list of registered bookmarks.
困ったときには (Troubleshooting) : Search from lists of
troubles or error messages.
Basic Operation
When FOMA terminal is closed and the alarm sounds, double-tapping
the front or back side stops the alarm. When the clock is displayed on
the sub-display, double-tapping the side displays details of arrival
information.
Point
･ On a description screen, select "この機能を使う (Use this function)" to
perform a function. Selecting a link item in "関連機能 (related functions)",
or "→コチラ (See more)" displays a corresponding description screen.
･ Terms indicated with 【 】in this manual are index terms in "Guide".
a meh Settings & NW serviceeg Clock &
Otheref Motion sensorea ON or b OFF
Information
･ You can also access フリーワード検索 from クイック検索. ⇒P104
27
F-08B_EN_FCC
Caller ID notification (At subscription : Notify)
You can notify your phone number (caller ID) to the other party's
terminal when making a voice call.
Basic Operation
a meh Settings & NWserviceseh NW Servicese
d Caller IDea Caller ID notificationea Activate/
Deactivateea Notify
Select "b Not notify" if you do not want to inform.
Point
･ Caller ID is your important personal information. Carefully consider
whether you want to include caller ID information when making a call.
･ If an announcement of requesting caller ID is heard when making a call,
make a call again after setting Caller ID notification or adding prefix "186".
28
F-08B_EN_FCC
Appendix
Specific absorption rate (SAR) of mobile phone
This model phone FOMA F-08B meets the MIC's*1 technical regulation
governing exposure to radio waves.
The technical regulation established permitted levels of radio frequency
energy, based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The regulation employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)*2 averaged
over 10 grams of tissue. The limit includes a substantial safety margin designed
to assure the safety of all persons, regardless of age and health. The value of
the limit is equal to the international guidelines recommended by ICNIRP.*3
All phone models should be confirmed to comply with the regulation, before
they are available for sale to the public. The highest SAR value for this FOMA
F-08B is 1.440 W/kg. It was taken by the Telecom Engineering Center (TELEC).
The test for SAR was conducted according to the MIC testing procedure using
standard operating positions with the phone transmitting at its highest
permitted power level in all tested frequency bands. While there may be
differences between the SAR levels of various phones and at various positions,
they all meet the MIC's technical regulation. Although the SAR is determined at
the highest certified power level, the actual SAR of the phone during operation
can be well below the maximum value.
For further information about SAR, please see the websites below.
Others
132
World Health Organization (WHO) :
http://www.who.int/peh-emf/en/
ICNIRP :
http://www.icnirp.de/
MIC :
http://www.tele.soumu.go.jp/e/sys/ele/index.htm
TELEC :
http://www.telec.or.jp/ENG/Index_e.htm
NTT DOCOMO :
http://www.nttdocomo.co.jp/english/product/sar/
FUJITSU LIMITED :
http://www.fmworld.net/product/phone/sar/
*1 Ministry of Internal Affairs and Communications.
*2 The technical regulation is provided in Article 14-2 of the Ministry Ordinance
Regulating Radio Equipment.
*3 International Commission on Non-Ionizing Radiation Protection.
Declaration of Conformity
The product "F-08B" is declared to conform with the essential requirements of
European Union Directive 1999/5/EC Radio and Telecommunications Terminal
Equipment Directive 3.1(a), 3.1(b) and 3.2.The Declaration of Conformity can be
found on http://www.fmworld.net/product/phone/doc/.
This mobile phone complies with the EU requirements for exposure to radio
waves.
Your mobile phone is a radio transceiver, designed and manufactured not to
exceed the SAR* limits** for exposure to radio-frequency(RF) energy, which
SAR* value, when tested for compliance against the standard was 1.410W/Kg.
While there may be differences between the SAR* levels of various phones and
at various positions, they all meet*** the EU requirements for RF exposure.
The exposure standard for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/
Kg) averaged over ten grams of tissue, recommended by The Council of the
European Union. The limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
*** Tests for SAR have been conducted using standard operation positions with
the phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a base station antenna, the lower the
power output.
F-08B_EN_FCC
Federal Communications Commission
(FCC) Notice
･ This device complies with part 15 of the FCC rules.
･
Operation is subject to the following two conditions :
a this device may not cause harmful interference, and
b this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications made in or to the radio phone, not expressly
approved by the manufacturer, will void the user's authority to operate the
equipment.
FCC RF Exposure Information
Others
This model phone meets the U.S. Government's requirements for exposure to
radio waves.
This model phone contains a radio transmitter and receiver. This model phone
is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy as set by the FCC of the U.S. Government. These
limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that
were developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR limit set
by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating
positions as accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output level of the phone.
Before a phone model is available for sale to the public, it must be tested and
certified to prove to the FCC that it does not exceed the limit established by the
U.S. government-adopted requirement for safe exposure. The tests are
performed on position and locations (for example, at the ear and worn on the
body) as required by FCC for each model. The highest SAR value for this model
phone as reported to the FCC, when tested for use at the ear, is 0.854W/kg, and
when worn on the body, is 0.821W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and FCC
requirements).
While there may be differences between the SAR levels of various phones and
at various positions, they all meet the U.S. government requirements.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file with the FCC and
can be found under the Equipment Authorization Search section at http://
www.fcc.gov/oet/ea/fccid/ (please search on FCC ID VQK-F08B).
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product
or when used with an accessory that contains no metal and which positions the
handset at a minimum distance of 1.5 cm from the body.
* In the United States, the SAR limit for wireless mobile phones used by the general public
is 1.6 Watts/kg (W/kg), averaged over one gram of tissue. SAR values may vary
depending upon national reporting requirements and the network band.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
133
F-08B_EN_FCC
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important Safety Information
Others
134
AIRCRAFT
Switch off your wireless device when boarding an aircraft or whenever you are
instructed to do so by airline staff. If your device offers flight mode or similar
feature consult airline staff as to whether it can be used on board.
DRIVING
Full attention should be given to driving at all times and local laws and
regulations restricting the use of wireless devices while driving must be
observed.
HOSPITALS
Mobile phones should be switched off wherever you are requested to do so in
hospitals, clinics or health care facilities. These requests are designed to
prevent possible interference with sensitive medical equipment.
PETROL STATIONS
Obey all posted signs with respect to the use of wireless devices or other radio
equipment in locations with flammable material and chemicals. Switch off your
wireless device whenever you are instructed to do so by authorized staff.
INTERFERENCE
Care must be taken when using the phone in close proximity to personal
medical devices, such as pacemakers and hearing aids.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15 cm be
maintained between a mobile phone and a pace maker to avoid potential
interference with the pacemaker. To achieve this use the phone on the opposite
ear to your pacemaker and does not carry it in a breast pocket.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
For other Medical Devices :
Please consult your physician and the device manufacturer to determine if
operation of your phone may interfere with the operation of your medical
device.
F-08B_EN_FCC
Appendix
Appendix
Export Administration Regulations
Intellectual Property Right
This product and its accessories may be under coverage of the Export
Administration Regulations of Japan ("Foreign Exchange and Foreign Trade
Control Laws" and the related laws and regulations). And, they are also under
coverage of Export Administration Regulations of the U.S. When exporting
and reexporting this product and its accessories, take necessary procedures
on your responsibility and expense. For details, contact Ministry of Economy,
Trade and Industry of Japan or US Department of Commerce.
Copyrights and portrait rights
Except for the case protected by copyright laws such as personal use, use of
FOMA terminal to reproduce, alter, or publicly transmit recorded pictures or
sounds, or copyrighted text, images, music or software downloaded from
websites without the copyright holder's authorization is prohibited.
Note that taking photos or recordings at some demonstrations, performances
or exhibitions may be prohibited even when only for personal use.
Avoid taking pictures of others with FOMA terminal without their consent or
disclosing recorded pictures of others without their consent to general public
through Internet websites etc., because they may infringe on portrait rights.
Trademarks
Others
Company and product names mentioned in this manual are trademarks or
registered trademarks of their respective holders.
･ "FOMA", "i-mode", "i-αppli", "i-motion", "Deco-mail", "Chara-den", "ToruCa",
"mopera", "WORLD CALL", "DCMX", "WORLD WING", "OFFICEED", "2in1",
"docomo STYLE series" and logos of "FOMA", "i-mode", "i-αppli",
"Music&Video Channel", "DCMX", "iD" and "iC" are trademarks or registered
trademarks of NTT DOCOMO.
･ "Catch Phone (Call Waiting Service)" is a registered trademark of Nippon
Telegraph and Telephone Corporation.
･ Free Dial logo mark is a registered trademark of NTT Communications
Corporation.
･ McAfee® is registered trademarks or trademarks of McAfee, Inc. and/or its
affiliates in the US and/or other countries.
･ G-GUIDE, G-GUIDE MOBILE and their logos are registered
trademarks in Japan of U.S. Gemstar-TV Guide International, Inc.
and/or its affiliates.
135
F-08B_EN_FCC
･ This product contains Adobe® Flash® Lite® and Adobe Reader® LE
･
･
Others
･
･
･
･
･
･
･
technology of Adobe Systems Incorporated.
Adobe Flash Lite Copyright© 2003-2010 Adobe Systems Incorporated. All
rights reserved.
Adobe Reader Mobile Copyright© 1993-2010 Adobe Systems Incorporated.
All rights reserved.
Adobe, Adobe Reader, Flash and Flash Lite are either
registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
This product contains NetFront Browser,
NetFront Sync Client of ACCESS CO., LTD.
ACCESS, the ACCESS logo and NetFront are trademarks or registered
trademarks of ACCESS CO., LTD. in the United States, Japan and/or other
countries.
Copyright© 2009 ACCESS CO., LTD. All rights reserved.
Powered by JBlend™ Copyright 2002-2009 Aplix Corporation. All
rights reserved.
JBlend and JBlend-related trademarks are trademarks or registered
trademarks of Aplix Corporation in Japan and other countries.
is a registered trademark of FeliCa Networks, Inc.
FeliCa is a registered trademark of Sony Corporation.
QR code is a registered trademark of Denso Wave Inc.
microSDHC logo is a trademark of D-3C,LLC.
"Multitask" is a registered trademark of NEC Corporation.
QuickTime is a registered trademark of Apple Inc. in the US and other
countries.
Microsoft®, Windows®, Windows Vista®, Windows Media® and
PowerPoint® are trademarks or registered trademarks of "Microsoft
Corporation" in the US and other countries.
･ The abbreviations of operating systems (Japanese versions) below are used
･
･
･
･
･
･
･
･
･
･
･
･
136
in this manual.
- Windows 7 stands for Microsoft® Windows® 7(Starter, Home Basic, Home
Premium, Professional, Enterprise Ultimate).
- Windows Vista stands for Windows Vista® (Home Basic, Home Premium,
Business, Enterprise and Ultimate).
- Windows XP indicates the Microsoft® Windows® XP Professional
operating system or Microsoft® Windows® XP Home Edition operating
system.
Google is registered trademark of Google Inc.
"CROSS YOU" is a trademark of Sony Corporation.
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
ATOK + APOT of Justsystem Corporation is installed in this product as
Japanese character conversion function.
"ATOK" "APOT (Advanced Prediction Optimization Technology)" are
registered trademarks of Justsystem Corporation.
This equipment is provided with the software licensed by Symbian Software
Ltd. or the licensor©1998-2010.
and Symbian OS are trademarks of
Symbian Ltd. or the licensor.
"Privacy mode" is a registered trademark of FUJITSU LIMITED.
"Uni-Type" is a registered trademark of LIM Corp., Ltd.
FrameSolid is the registered trademark of Morpho, Inc. in Japan and other
countries.
The auto object tracking technology utilized is TrackSolid™, a product of
Morpho, Inc. TrackSolid™ is trademark of Morpho, Inc.
ズーキーパー (Zookeeper) is a trademark or registered trademark of
KITERETSU Inc.
"日英版しゃべって翻訳 for F (J-E Speech Translation for F)" is trademark of
ATR-Trek.
Other company and product names mentioned in this manual are
trademarks or registered trademarks of their respective holders.
F-08B_EN_FCC
Others
･ FeliCa is a contactless IC card technology developed by Sony Corporation.
･ This product contains a module developed by the Independent JPEG Group.
･ The image interpolation technology utilized is FrameSolid, a product of
Morpho, Inc.
･ This product is equipped with the technologies of GestureTek, Inc.
Copyright© 2006-2010, GestureTek, Inc. All Rights Reserved.
･ "学研モバイル国語辞典 (Gakken Mobile JpnDic)", "学研モバイル和英辞典
･
･
Others
(Gakken Mobile JE Dic)", "学研モバイル英和辞典 (Gakken Mobile EJ Dic)", "今
日は何の日 (Today's trivia)" and "今日の歴史 (Today in history)" are
copyrighted by GAKKEN CO., LTD.
This product is licensed based on MPEG-4 Visual Patent Portfolio License.
The use of MPEG-4 Video Codec function is allowed for personal and
nonprofit use only in the cases below.
- Recording moving pictures and i-motion that conform to MPEG-4 Visual
Standard (hereinafter referred to as MPEG-4 Video)
- Playing MPEG-4 Videos recorded personally by consumers not engaged in
profit activities
- Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA
For further utilizing such as promotion, in-house use or profit-making
business, please contact MPEG LA, LLC in U.S.
Content owners use Windows Media digital rights management technology
(WMDRM) to protect their intellectual property, including copyrights. This
device uses WMDRM software to access WMDRM-protected content. If the
WMDRM software fails to protect the content, content owners may ask
Microsoft to revoke the software's ability to use WMDRM to play or copy
protected content. Revocation does not affect unprotected content. When
downloading licenses for protected content, you agree that Microsoft may
include a "Revocation List" with the licenses. Content owners may require
you to upgrade WMDRM to access their content. If you decline an upgrade,
you cannot access a content that requires the upgrade.
137
General Inquiries 
(Business hours : 9:00 a.m. to 9:00 p.m.)
0120-005-250 (toll free)
* Service available in: English, Portuguese, Chinese, Spanish, Korean.
* Available from mobile phones and PHSs (including non-DOCOMO phones).
* Unavailable from part of IP phones.
(Business hours : 9:00 a.m. to 8:00 p.m.)
■ From DOCOMO mobile phones
■ From land-line phones
(In Japanese only)
(In Japanese only)
(No prefix) 151 (toll free)
Repairs
(Business hours : 24 hours (open all year round)
■ From DOCOMO mobile phones
■ From land-line phones
(In Japanese only)
(In Japanese only)
(No prefix) 113 (toll free)
* Unavailable from land-line phones, etc.
0120-800-000 (toll free)
* Available from mobile phones and PHSs.
(including non-DOCOMO phones).
* Unavailable from part of IP phones.
0120-800-000 (toll free)
* Unavailable from land-line phones, etc.
* Available from mobile phones and PHSs.
(including non-DOCOMO phones).
* Unavailable from part of IP phones.
● Please confirm the phone number before you dial.
● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site.
NTT DOCOMO website http://www.nttdocomo.co.jp/english/
i-mode site iMenu⇒お客様サポート (user support)⇒ドコモショップ (docomo Shop) * In Japanese only
Loss or theft of FOMA terminal or payment of cumulative cost overseas

(available 24 hours a day)
(available 24 hours a day)
■ From DOCOMO mobile phones
International call access code
for the country you stay
■ From DOCOMO mobile phones
-81-3-6832-6600* (toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※If you use F-08B, you should dial the number ＋81-3-6832-6600 (to enter '＋',
press and hold the '0' key for at least one second).
■ From land-line phones 
International prefix number
for the universal number
Failures encountered overseas

-8000120-0151*
International call access code
for the country you stay
-81-3-6718-1414* (toll free)
* You are charged a call fee to Japan when calling from a land-line phone, etc.
※If you use F-08B, you should dial the number ＋81-3-6718-1414 (to enter '＋',
press and hold the '0' key for at least one second).
■ From land-line phones 
International prefix number
for the universal number
-8005931-8600*
* You might be charged a domestic call fee according to the call rate for the country you stay.
* You might be charged a domestic call fee according to the call rate for the country you stay.
※For international call access codes for major countries/international prefix numbers
※For international call access codes for major countries/international prefix numbers
for the universal number, refer to DOCOMO International Services website.
for the universal number, refer to DOCOMO International Services website.
● If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal.
● If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.
To prevent damage to the environment,
bring used battery packs to a docomo
service counter, a docomo agent or a
recycle center.
Don't forget your mobile phone ･･･ or your manners!
When using your mobile phone in a public place, don't forget to
show common courtesy and consideration for others around you.
2010.X (1st Edition)
CA92002-XXXX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2010:04:02 15:29:16+09:00
Create Date                     : 2010:03:18 11:24:26+09:00
Metadata Date                   : 2010:04:02 15:29:16+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : L01.fm
Creator                         : DocMaker
Document ID                     : uuid:555e3148-d7a2-44c9-ba75-8fefdcba6e16
Instance ID                     : uuid:169e661b-d388-46a4-b5a1-ec41dc6d8066
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Has XFA                         : No
Page Count                      : 21
Author                          : DocMaker

EXIF Metadata provided by EXIF.tools