Fujitsu F11C Mobile phone User Manual L09

Fujitsu Limited Mobile phone L09

UserManual.wiki >

Fujitsu >

F11C User Manual HTML Version

manual

INSTRUCTION MANUAL

INSTRUCTION MANUAL ’11.X

F-11C

F-11C_EN_ninshou

DOCOMO W-CDMA, GSM/GPRS, Wireless LAN System

Thank you for purchasing "docomo SMART series F-11C" mobile terminal.

Before using F-11C, read this manual to ensure safe use and handling.

About manuals for F-11C

The operations of F-11C are described in this manual, "

使いかたガイド

(Guide)” (installed in FOMA

terminal) and "Instruction manual (detailed version)" (in pdf format).

･

In this "F-11C INSTRUCTION MANUAL", "F-11C" mobile terminal is usually referred to as "FOMA terminal".

･

The images or illustration used in this manual are examples. They may differ from the actual displays.

･

The images used in this manual assume that Kisekae Tool is set to "White" and Color theme setting is set to

"White".

･

In this manual, "authenticate" indicates the operating procedure for entering the terminal security code in 4-

8 digits (

⇒

P41) or performing fingerprint authentication.

Basic package

･

Unauthorized copying of parts of or this entire manual is prohibited.

･

The contents in this manual, URL and contents are subject to change without prior notice.

Instruction

manual (this

manual)

This manual provides information about screens and operations of basic

functions.

使いかたガイド

(Guide) "(installed

in FOMA terminal)

This guide provides overviews and operations of frequently-used functions. (In

Japanese only)

In F-11C Stand-by display,

mef

Tool

Guide

Select a search method

"Instruction

manual (detailed

version)" (in pdf

format)

This manual provides detailed information and operations of all the functions.

(In Japanese only)

<From a PC> This manual can be downloaded from NTT DOCOMO website.

http://www.nttdocomo.co.jp/support/trouble/manual/download/index.html

The URL and contents are subject to change without prior notice.

Desktop Holder F33

is made of recycled

ABS from used

products.

F-11C

(including Back

Cover F62 and

warranty)

Instruction manual

Battery Pack F19 Desktop Holder F33

Compatible options

⇒

PXX

F-11C_EN_ninshouF-11C_EN_ninshouF-11C_EN_ninshou

Connect

Basic

Operation

Introduction

Enjoy

Others

Convenient

Contents

FOMA terminal ...........................

What you can do with F-11C.....

Part names and functions .........

Usage styles ...............................

Precautions (Always follow these

directions)...............................

Handling precautions ................

Waterproof/Dustproof function

Before Using ...............................

Screen Explanation ....................

Character Entry ..........................

Sound/Screen Setting ..............

Lock/Security.............................

Call Telephone............................

Mail..............................................

Phonebook ..................................

i-mode/Full Browser/Smart Browser........................................................

i-Channel .....................................

Camera ........................................

1Seg.............................................

Music ...........................................

i-αppli..........................................

i-motion/Movie..........................

Osaifu-Keitai ...............................

i-concier.......................................

Convenient tools ........................

Data Management.....................

Support .......................................

Appendix .....................................

Index............................................

112

F-11C_EN_ninshou

Introduction

FOMA terminal

･

Because your FOMA terminal uses wireless transmission, it may not function in locations where it is

difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings, in areas

where radio waves are weak, or out of service area. Even when you are high up in a tall building or

condominium and nothing blocks your view outside, your FOMA terminal may not be able to receive or

transmit signals. Also, communication may be interrupted even when the signal meter on your FOMA

terminal indicates there are strong radio waves and you are not moving (traveling).

･

Use your FOMA terminal in a way that does not disturb others in public spaces, crowded locations or quiet

places.

･

Because your FOMA terminal uses radio waves to communicate, it is possible that a third party may

attempt to tap your calls. However, the W-CDMA, GSM/GPRS, Wireless LAN system automatically applies

a confidential communication function to all calls, so even if a third party could somehow tap a call, they

only hear noise.

･

Your FOMA terminal encodes voice communication as digital data. When you are operating your FOMA

terminal while moving to a location subject to weaker radio wave conditions, the transmitted digital data

may not be correctly decoded and as a result the decoded voice may differ somewhat from the actual voice.

･

Maintain a separate record of the data (Phonebook, Schedule, Memo, Recorded messages, Voice memos,

Moving picture memos, etc.) you registered in your FOMA terminal. Note that DOCOMO assumes no

responsibility for any loss of saved contents of data resulting from malfunction, repair, changing of the

model or other handling of FOMA terminal.

･

You are recommended to save important data to microSD card. Using DOCOMO keitai datalink, you can

transfer and save phonebook, mail, schedule and other data to a PC.

･

The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS.

Neither DOCOMO nor the certifier as listed herein makes any representation and warranty as for the

security in the use of SSL/TLS. If the data should be erased, DOCOMO assumes no responsibility for the

loss of any data.

Certifier : VeriSign Japan K.K., Cybertrust Japan Co., Ltd., GlobalSign K.K., RSA Security Japan Ltd.,

SECOM Trust Systems Co., Ltd., Comodo CA Ltd., Entrust, Inc., Go Daddy, Inc.

･

This FOMA terminal supports FOMA Plus-Area and FOMA HIGH-SPEED Area.

･

FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's roaming

area.

F-11C_EN_ninshou

Introduction

What you can do with F-11C

Waterproofness/Dustproofness

Waterproofness of IPX5 and IPX8 and

dustproofness of IP5X are provided by firmly

closing the external connection jack cap and

installing the back cover in a locked state.

Quick voice activation

Just speaking a keyword of function you want to

use activates the function. It is useful when you do

not know where is a desired function in the menu

or when you want to activate the function

immediately.

使いかたガイド

(Guide)

Without the instruction manual at your hand, you

can check readily the operations of function you

want to use. By searching from the function list or

entering a keyword, you can view the outline or

operation for the function and also activate the

function. (In Japanese only)

Smart Browser

WebKit, adopted by Smartphone etc., enables to

view contents on the Internet comfortably by

touch operation.

i-concier

It is a service that Machi-chara (a character on the

stand-by display) supports your life like a butler or

concierge. It stores your various information (area

of residence, memo, schedule, ToruCa,

phonebook, etc.) and offers you information that

matches contents of Memo or Schedule, your

living area or current location, or preferences and

interest at the right time. (In Japanese only)

F-11C_EN_ninshou

Introduction

Part names and functions

Part names of F-11C and major functions assigned to each part are as follows.

F-11C_EN_ninshou

Introduction

To use the function with *, press the key for 1

second or more.

Earpiece

Display

Microphone for calling and recording

Light sensor for sensing the ambient

lightness to adjust the brightness of the

display

1Seg antenna used for 1Seg watching

Sub-display

Charging light

Light for opening/closing FOMA terminal,

using camera, etc.

FOMA antenna is built-in

Camera

Fingerprint sensor for registering

fingerprint and authentication

Infrared data port for infrared

communication or infrared remote control

function

Speaker

mark for placing over IC card reader for

Osaifu-Keitai and iC transmission

Back cover

Charging jack

Back cover lever

Open assist button

Strap opening

Jack for charger, earphone, etc.

Display the menu

Display the mail menu, switch text input

modes or check new mail/message

Display i-Channel or return to the previous

screen

Start voice call, switch to hands-free call or

perform quick voice activation

Enter phone number or characters,

or select menu item

Enter "*" or voiced/semi-voiced sound, or

start/cancel Public mode (Drive mode)

Start/Exit i-Widget, or watch 1Seg

(Search key) Activate Quick search/i-mode

voice search

Multi-cursor key for moving the cursor

g :

Perform an operation

u :

Display Schedule, or adjust sound volume

d :

Display Phonebook, adjust sound volume

or add a phonebook entry

l :

Display Received calls

r :

Display Redial or start/cancel IC card lock

Start the still camera shooting

Display iMenu or i-

ppli folder

Exit a running function, or turn ON/OFF the

FOMA terminal by pressing for 2 seconds or

Enter "#" or punctuation, or start/cancel

Silent mode

Multitask key for starting another function

during a call or operation, or start/cancel Privacy

view

Side keys

Record video, start the still camera shooting

and operate Music player

Stop the ring alert, vibrator or adjust sound

volume

Mail/message inquiry, adjust sound volume,

and activate High-pitched alarm

F-11C_EN_ninshou

Introduction

* AC adapter uses a common jack.

Connection of Stereo Earphone Set 01 (Optional)

for external connection jack

Stereo Earphone Set 01

AC adapter External

connection jack

F-11C_EN_ninshou

Introduction

Precautions (Always follow these directions)

・

Before using your FOMA terminal, or when

necessary, read the precautions below to

ensure safe use and handling. After reading this

manual, keep it carefully.

・

These precautions are intended to protect you

and others around you. Read and follow them

carefully to avoid injury, damage to the product

or damage to property.

・

The signs below differentiate between the

levels of danger that can occur if the product is

not used within the specified guidelines.

・

The symbols below show specific directions.

■

Precautions contain the description below.

Handling FOMA terminal, battery pack, adapter,

desktop holder and UIM (common) .........................8

Handling FOMA terminal ..............................................9

Handling battery pack .................................................11

Handling adapter and desktop holder .......................12

Handling UIM...............................................................13

Handling mobile phones near electronic medical

equipment.................................................................13

DANGER

This sign denotes that

death or serious injury

may directly result from

improper use.

WARNING

This sign denotes that

death or serious injury

may result from

improper use.

CAUTION

This sign denotes that

minor injury or damage

to property may result

from improper use.

This symbol denotes that the action

is prohibited.

This symbol denotes that

disassembling the phone or its

components is not allowed.

Don’t

No disassembly

This symbol denotes that using the

phone or its components with wet

hands is not allowed.

This symbol denotes that using the

phone or its components in a

bathroom or other highly humid

area is not allowed.

This symbol denotes that an

instruction must be obeyed at all

times.

This symbol denotes that the

equipment should be unplugged.

No wet hands

No liquids

Unplug

F-11C_EN_ninshou

Introduction

DANGER

Do not use, store, or leave the

equipment in hot areas such as near

flames or in areas under strong direct

sunlight such as inside a vehicle.

May cause fire, burns or injuries.

Do not put the terminal into heating

cooking device such as microwave oven

or high-pressure container.

May cause fire, burns, injuries, electric shock.

Do not disassemble or remodel the

equipment.

May cause fire, burns, injuries, electric shock.

Do not let the terminal get wet with

water, drinking water, urine of pet

animals, etc.

May cause fire, burns, injuries, electric shock.

For waterproofness, refer to

⇒

P21

Use the battery pack and adapter

specified by NTT DOCOMO for your

FOMA terminal.

May cause fire, burns, injuries, electric shock.

WARNING

Do not throw the equipment or give

hard shock to it.

May cause fire, burns, injuries, electric shock.

Keep conductive materials (metal

pieces, pencil lead, etc.) from coming in

contact with the charging jack or

external connection jack. Do not put

those materials inside the terminal.

May cause fire, burns, injuries, electric shock.

Do not cover or wrap the terminal with

a blanket, etc while using or charging.

May cause fire or burns.

Turn FOMA terminal OFF and stop

charging before entering a place such as

a gas station where flammable gases

are generated.

The gas may catch fire.

When using Osaifu-Keitai in a place as a gas

station, turn OFF the terminal before using it.

(When IC card lock is activated, deactivate it

before turning OFF the terminal.)

If the equipment starts giving off a

strange smell, overheats, becomes

discolored or deformed during use,

charging or in storage, immediately

perform the following operations.

･

Remove the power plug from the wall

outlet or cigarette lighter socket.

･

Turn FOMA terminal OFF.

･

Remove the battery pack from FOMA

terminal.

Failure to do so may cause fire, burns, injuries,

electric shock.

CAUTION

Do not leave the equipment on unstable

or sloping surfaces.

May cause injuries.

Do not store the equipment in

extremely humid, dusty or hot areas.

May cause fire, burns, electric shock.

Handling FOMA terminal, battery

pack, adapter, desktop holder and

UIM (common)

Don’t

No disassembly

No liquids

Don’t

F-11C_EN_ninshou

Introduction

Children using the equipment should be

instructed in proper operation by an

adult. Do not allow them to use the

equipment without adult supervision.

May cause injuries.

Store the equipment out of reach of

small children.

May be accidentally swallowed or cause

injuries.

Be careful especially when using FOMA

terminal connected to the adapter

continuously for a long time.

If you use i-

ppli, a videophone call or 1Seg

watching while charging the battery for a long

time, FOMA terminal, battery pack and adapter

may be heated.

Directly touching a hot part for a long time, you

may have redness, itching or rash on your skin,

or it may result in low-temperature burns

depending on your constitution and/or health

condition.

WARNING

Do not direct the infrared data port

toward your eye and transmit signals.

May cause harmful effect on eyes.

Do not direct the infrared data port

toward home electric appliances etc.

equipped with infrared device when

using infrared communication.

May cause an accident because of malfunction

of infrared device.

Do not turn on the light by getting the

lighting part closer to other person's

eyes.

May impair eyesight. And may cause accidents

like injury etc., by dazzling or astounding other

people.

Do not put foreign objects such as liquid

like water, metal pieces or burnable

things into UIM or microSD card slot.

May cause fire, burns, injuries, electric shock.

Do not turn on the light aiming directly

at the driver of the car etc.

May disturb driving and cause an accident.

Turn FOMA terminal OFF in areas where

use is prohibited, such as in airplanes

and hospitals.

Failure to do so may cause electronic equipment

or electronic medical equipment to fail or

malfunction. If the function which automatically

turns the power ON is set, cancel the setting

before turning the power OFF.

When using the phone in a medical facility, be

sure to observe the regulations of the facility. If

you do prohibited act such as using the phone in

an airplane, you will be punished according to

law.

When you talk by setting handsfree or

ring alert is sounding, keep FOMA

terminal away from your ear.

And, when connecting the earphone/

microphone etc. to the FOMA terminal

and play a game or music, adjust the

volume moderately.

Too loud volume may cause a hearing loss.

And, if you cannot hear the sound around you

clearly, it may cause an accident.

Handling FOMA terminal

Don’t

F-11C_EN_ninshou

Introduction

If you have weak heart, be careful when

setting the Vibrate alert (vibration) or

alert volume setting.

May cause harmful effect on heart.

When you use electronic medical

equipment, check with the equipment

manufacturer to determine how the

device is affected by radio waves before

using.

May cause harmful effect on electronic medical

equipment etc.

Turn FOMA terminal OFF near high-

precision electronic control equipment

or electronic equipment using low-

power signals.

Failure to do so may cause the equipment to fail

or malfunction.

* Examples of electronic equipment to avoid.

Hearing aids, implanted pacemakers or defibrillators,

other electronic medical equipment, fire alarms,

automatic doors and other automatic control

equipment.

Users wearing implanted pacemakers or defibrillators

or other electronic medical equipment should check

with the manufacturer or sales outlet about the effect

of radio frequencies on the equipment.

When the display or camera lens is

accidentally broken, be careful of

broken glass or exposed internal parts

of FOMA terminal.

Surfaces of display and camera lens are made of

plastic panels and they are structured for the

glass not to scatter, however, if you mistakenly

touch broken or exposed parts, you may be

injured.

To sound the high-pitched alarm,

always keep FOMA terminal away from

your ears.

Failure to do so may cause hearing defect.

CAUTION

Do not swing FOMA terminal by

antenna or its strap.

May cause accident such as injury to yourself or

others by hitting.

Do not use damaged FOMA terminal.

May cause fire, burns, injuries, electric shock.

When using the motion tracking or

motion sensor, check the safety around

you, hold FOMA terminal firmly, and do

not shake it unnecessarily.

May cause accident such as injuries.

If the display part is accidentally broken

and the liquid crystal leaks out, do not

make the substance contact with your

skin of face or hands.

May cause loss of sight or skin problems.

If the liquid crystal gets into your eyes or mouth,

rinse it with clean water and see a doctor

immediately.

And, if the liquid adheres to skin or clothing, use

alcohol etc. to wipe it off, then wash with soap.

To use the terminal in car, check with

automobile manufacturer or dealer to

determine how the device is affected by

radio waves before using.

In rare cases, using the phone in some vehicle

models can cause the vehicle's electronic

equipment to malfunction. In that case, stop

using the terminal immediately.

Mobile phones can give some users skin

problems such as itching, allergic

reactions or rashes. If you develop skin

problems, stop using the phone

immediately, and see a doctor.

⇒

"Material list (P14)"

Don’t

F-11C_EN_ninshou

Introduction

When opening or closing FOMA

terminal, take care not to have your

fingers or strap caught by the terminal.

May cause accident such as injuries.

When watching the display, take a

certain distance from the display in a

fully bright place.

May reduce visual acuity.

■

Check that the battery type matches the type

displayed on the battery pack label.

DANGER

Do not connect a wire or other metal

objects to the jack. And, do not carry or

store FOMA terminal with objects like a

metal necklace.

May cause the battery pack to ignite, burst, heat

or leak.

Check the orientation of battery pack to

install it to FOMA terminal, and do not

try to force the battery pack onto FOMA

terminal if you are having trouble

installing it.

May cause battery pack to ignite, burst, heat or

leak.

Do not throw the battery pack into the

fire.

May cause battery pack to ignite, burst, heat or

leak.

Do not nail the battery pack, hit with a

hammer or step on it.

May cause battery pack to ignite, burst, heat or

leak.

If the battery pack's fluid etc. contacts

eyes, immediately flush the eyes with

clean water and see a doctor right

away. Do not rub the eyes.

May cause loss of sight.

WARNING

If the battery pack seems to have

abnormalities such as deformation or

scratches due to falling, never use it.

May cause battery pack to ignite, burst, heat or

leak.

If the battery pack leaks or gives off a

strange smell, immediately remove it

from the vicinity of open flames.

The vapors from leaking battery pack fluid may

ignite or explode.

Be careful not to let your pet bite the

battery pack.

May cause battery pack to ignite, burst, heat or

leak.

CAUTION

Do not discard old battery packs

together with other garbage.

May cause igniting or environmental

destruction. Tape the terminals of old battery

packs to insulate them, and then bring them into

a sales outlet such as docomo Shop. If your local

municipality has a battery recycling program,

dispose of them as provided for.

Handling battery pack

Display Battery type

Li-ion 00 Li-ion battery

Don’t

F-11C_EN_ninshou

Introduction

Do not use or charge a wet battery pack.

May cause battery pack to ignite, burst, heat or

leak.

If fluid etc. leaks out from the battery

pack, do not make the fluid contact with

your skin of face or hands.

May cause loss of sight or skin problems.

If the fluid etc. put into your eyes or mouth, or

contacts skin or clothes, immediately flush the

contacted area with clean water.

If the fluid put into the eyes or mouth,

immediately see a doctor after flushing.

WARNING

Do not use the adapter cord if it gets

damaged.

May cause fire, burns, electric shock.

Do not use the AC adapter or desktop

holder in a bathroom or other highly

humid area.

May cause fire, burns, electric shock.

Always use the DC adapter with a

negative-ground vehicle. Do not plug it

into a positive-ground vehicle.

May cause fire, burns, electric shock.

When it starts to thunder, do not touch

adapter.

May cause electric shock.

Do not short the charging jack while it is

connected to the outlet or cigarette

lighter socket. Do not touch the

charging jack with a part of your body

such as your hand or finger.

May cause fire, burns, electric shock.

Do not place heavy objects on the

adapter cord.

May cause fire, burns, electric shock.

When you insert and remove AC

adapter from power outlet, do not

contact a metal strap or other metal

objects with the jack.

May cause fire, burns, electric shock.

Do not touch the adapter cord, desktop

holder or outlet with wet hands.

May cause fire, burns, electric shock.

Only use with the specified power

source and voltage.

When charging FOMA terminal

overseas, use AC Adapter for global use.

If incorrect voltage is used, this may cause fire,

burns or electric shock.

AC adapter : AC100V

DC adapter : 12 or 24V DC (specific for negative

ground vehicle)

AC adapter for global use : Between 100V and

240V AC (Connect to the AC outlet for internal

household use)

If the DC adapter's fuse blows, replace it

only with the specified fuse.

May cause fire, burns, electric shock. For the

specified fuse, see the instructions that come

with the DC adapter.

Wipe off any dust that accumulates on

the power plug.

Failure to do so may cause fire, burns, electric

shock.

Handling adapter and desktop

holder

Don’t

No wet hands

F-11C_EN_ninshou

Introduction

When you connect the AC adapter to an

outlet, firmly connect to the outlet.

Failure to do so may cause fire, burns, electric

shock.

When you disconnect the adapter from

the outlet or cigarette lighter socket, do

not pull the adapter cord with excessive

force. Instead, hold the power plug to

disconnect.

May cause fire, burns, electric shock.

Always remove the power plug from

the outlet or cigarette lighter when not

using the adapter for an extended

period.

Failure to do so may cause fire, burns, electric

shock.

Immediately remove the power plug

from the outlet or cigarette lighter

socket if water or other fluids get into

the adapter.

Failure to do so may cause fire, burns, electric

shock.

Always remove the power plug from

the cigarette lighter socket when

cleaning the equipment.

Failure to do so may cause fire, burns, electric

shock.

CAUTION

Be careful of the cut surface when

removing UIM.

May cause injuries.

■

These precautions are based on the guidelines

produced at the Electromagnetic Compatibility

Conference Japan, regarding the protection of

electronic medical equipment from radio

waves emitted by mobile phone units.

WARNING

Obey the following rules inside medical

facilities.

･

Do not bring FOMA terminal into operating

rooms (ORs), intensive care units (ICUs) or

coronary care units (CCUs).

･

Turn FOMA terminal OFF in hospital wards.

･

Turn FOMA terminal OFF in hospital lobbies

and corridors if electronic medical equipment

could be nearby.

･

If the medical facility has specified zones

where use or possession of mobile devices is

prohibited, obey those instructions.

･

If the function to automatically turn ON the

power is set, cancel the setting before turning

the power OFF.

Turn FOMA terminal OFF in crowded

trains or other public places where

pacemaker or defibrillator wearers

could be nearby.

FOMA terminal's signals may affect the

operation of implanted pacemakers or

defibrillators, and other devices.

Wearers of implanted pacemakers or

defibrillators must carry and use FOMA

terminal at least 22 cm away from the

implanted device.

FOMA terminal's signals may affect the

operation of implanted pacemakers or

defibrillators, and other devices.

Handling UIM

Unplug

Handling mobile phones near

electronic medical equipment

F-11C_EN_ninshou

Introduction

When electronic medical equipment

other than implanted pacemakers or

defibrillators are in use outside of

medical facilities (such as in home care

settings), check with the device

manufacturer to determine how the

device is affected by electrical signals.

FOMA terminal's signals may affect the

performance of electronic medical equipment.

Material list

Part Material Surface

treatment

Exterior

case

Movable

part Display

PC resin UV hard

coating

Movable

part Rear

surface

PA-GF resin UV hard

coating

Fixed part

Keypad

PA-GF resin UV hard

coating

Fixed part

Battery

PC+ABS

resin

UV hard

coating

Back cover PC+ABS

resin

UV hard

coating

Back cover

lock lever

POM resin None

Back cover

lock plate

Stainless

steel

None

Back cover

(body)

Stainless

steel

None

Back cover

(gasket)

Silicon

rubber

None

Display panel Hardened

glass

Shatterproof

film

Camera lens Camera

panel

High heat

resistance

transparent

material (

シ

ルプラス

)

UV hard

coating

Camera ring

(Color:

BLACK,

RED)

ABS resin Chrome-plating

Camera ring

(Color:

WHITE)

Acrylate

resin

None

Light lens PC resin None

Side keys PC resin UV hard

coating

Keypad PC resin UV hard

coating

External

connection

jack cap

Body PC resin UV hard

coating

Flexure Elastomer

resin (TPE)

None

Water stop PC resin None

Water stop

rubber

Silicon

rubber

None

Charging

jack

Contacts Stainless

steel

Gold plating

Attaching

holder

section

LCP resin None

External connection jack Stainless

steel

Tin plating

Facing sheet around

keypad

PET resin UV hard

coating

Part Material Surface

treatment

F-11C_EN_ninshou

Introduction

Movable

part/Rear

surface

Facing panel ABS resin UV hard

coating

Corner pad Elastomer

resin (TPEE)

None

Screw sheet Polyester

film

None

Screw (battery install

recess)

Stainless

steel

None

Battery install recess face PC board Gold plating

Battery

contacts

Battery

contacts

connector

PPS resin None

Battery

contacts

Beryllium

copper

Gold plating

(base : Ni-Pd

plating)

Battery pack Battery pack PC resin None

Contacts Beryllium

copper

Gold plating

Fingerprint sensor Flexible PC

board

None

UIM tray POM resin None

Part Material Surface

treatment

F-11C_EN_ninshou

Introduction

Handling precautions

・

F-11C is waterproof/dustproof, however, do not allow

water or dust to seep into FOMA terminal and do not

allow accessories or optional devices to get wet or let

dust attach.

- Battery pack, adapter, UIM are not waterproof/

dustproof. Do not use in a bathroom or other highly

humid area or do not let rain attached. Or putting the

terminal on your body, humidity of sweat may cause

internal corrosion and malfunction. Note that

malfunctions, which are determined to be caused by

water as result of inspections, are not covered by the

warranty. Since these conditions are outside the scope

of the warranty, a repair, if at all possible, is charged.

・

Clean FOMA terminal with a dry soft cloth (such as a

cloth for eyeglasses).

- Rubbing it roughly with a dry cloth may scratch the

display.

- Drops of water or dirt left on the display may cause

stains.

- If FOMA terminal is wiped with alcohol, paint thinner,

benzine or detergent, the printing may disappear or

color may fade.

・

Clean the jack occasionally with a dry cotton swab

etc.

- If the jack is soiled, connection gets worse and it may

cause power to be turned off or insufficient battery

charge, so clean the jack with a dry cotton swab etc.

Also, be careful never to damage the jack when

cleaning it.

・

Do not place FOMA terminal near an air-conditioner

outlet.

- The rapid change in temperature may cause

condensation, causing internal corrosion and

malfunction.

・

When using, be careful not to subject excessive force

to FOMA terminal or the battery.

- If FOMA terminal is crammed into a brimming bag or

placed in a pocket and sat on, display, internal PCBs or

battery pack may be damaged or malfunction. And, if

external devices are plugged into the external

connection jack (earphone/microphone jack), the

breakage of the connector or malfunction may result.

・

Do not rub or scrape the display with a metal piece

etc.

- It may scratch the display, causing malfunction or

damage.

・

Carefully read the separate instructions that come

with the battery pack and adapter.

・

Do not press the surface of the touch panel strongly or

operate it with sharp objects such as a nail, a ballpoint

pen and a pin.

- It may damage the touch panel.

・

Avoid extreme temperature.

- Use FOMA terminal where the temperature ranges

between 5 and 40

℃

(limited to the temporary use in a

bathroom etc. when temperature is above 36

℃

) and

humidity ranges between 45 and 85%.

・

FOMA terminal may affect land-line phones, TVs or

radios in use nearby, so use it as far as possible from

these appliances.

・

Maintain a separate record of the data you saved in

your FOMA terminal.

- If the data is deleted, DOCOMO assumes no

responsibility for the loss of any data.

・

Do not drop FOMA terminal or subject it to shocks.

- May cause malfunction or damage.

・

Do not plug external devices into the external

connection jack (earphone/microphone jack) at a

slant, or do not pull it forcibly while it is plugged.

- May cause malfunction or damage.

General

FOMA terminal

F-11C_EN_ninshou

Introduction

・

Do not close FOMA terminal with the strap etc. held

inside.

- May cause malfunction or damage.

・

It is normal for FOMA terminal to become warm

during use or charging. Continue to use it.

・

Do not leave FOMA terminal with the camera in areas

under strong direct sunlight.

- May cause discoloring or burn-in of materials.

・

Use FOMA terminal with the external connection jack

cap closed.

- Dust and/or water brought into FOMA terminal cause

troubles.

・

Do not use FOMA terminal with the back cover

removed.

- May cause removal of battery pack, malfunction or

damage.

・

Do not put extreme thick sticker on the keypad face.

- May cause malfunction, damage or erroneous

operation.

・

Do not put label or sticker on the back side of display.

- Label or sticker may be hooked when opening/closing

FOMA terminal and may cause malfunction or

damage.

・

Do not rotate the display with FOMA terminal closed.

- It may scratch the part around the display and keypad,

and it may cause malfunction or damage.

・

Do not put strong impact on the fingerprint sensor or

scratch its surface.

- It may cause malfunction of fingerprint sensor and

disable authentication operation.

・

Clean the fingerprint sensor with a dry soft cloth (such

as a cloth for eyeglasses).

- If the fingerprint sensor is dirty or water is sit on its

surface, the sensor cannot read fingerprints, and it may

cause decrease authentication performance or

malfunction.

・

While microSD card is being used, do not take the

card out and do not turn off FOMA terminal.

- May cause data loss or malfunction.

・

Do not bring magnetic cards etc. close to FOMA

terminal nor clip it by FOMA terminal.

- Magnetic data in cash cards, credit cards, telephone

cards, floppy disks, etc. may be erased.

・

Do not bring magnetized objects close to FOMA

terminal.

- Bringing strong magnetism close may cause a

malfunction.

・

The battery pack is a consumable part.

- Replace the battery pack if FOMA terminal has

extremely short operation time on a full charge,

though it may vary by operating conditions. Purchase

a new battery pack of the specified type.

・

Charge the battery in an area within the proper

ambient temperature range (5-35

℃

・

The operation time provided by the battery pack

varies by the operating environment and battery

pack's deterioration.

・

The battery pack may swell out as it comes to near the

end of its lifetime depending on the usage conditions,

but it is not a problem.

・

Be careful especially about the following points when

preserving the battery pack.

- Keeping under the state of the full charge (right after

charging ends)

- Keeping under the state of the empty charge (too

exhausted to turn on FOMA terminal)

They may cause the battery pack performance to be

degraded or its lifetime to be shortened.

A recommended battery level to keep the battery pack

is the battery icon in 2 cells or in 40 % of remaining

battery level as a guide.

Battery pack

F-11C_EN_ninshou

Introduction

・

Charge the battery in an area within the proper

ambient temperature range (5-35

℃

・

Do not charge the battery in the areas below.

- In areas of excessive humidity, dust or vibrations

- Near land-line phones or TVs/radios

・

It is normal for the adapter to become hot while

charging. Continue to use it.

・

When using the DC adapter for charging, keep the

vehicle engine running.

- The vehicle's battery could become flat.

・

When using an outlet with a mechanism preventing

unplugging, follow the handling instructions for that

outlet.

・

Do not give strong shock. Do not deform the charging

jack.

- Doing so may cause malfunction.

・

Do not use excessive force to install/remove UIM.

・

Note that DOCOMO assumes no responsibility for

malfunctions occurring as the result of inserting and

using UIM with another IC card reader/writer.

・

Always keep UIM ICs clean.

・

Clean UIM with a soft, dry cloth (such as a cloth for

eyeglasses).

・

Maintain a separate record of the data you saved in

UIM.

- If the data is deleted, DOCOMO assumes no

responsibility for the loss of any data.

・

To preserve the environment, bring the old UIM to a

sales outlet such as docomo Shop.

・

Take care not to scratch, touch accidentally or short

IC.

- May cause data loss or malfunction.

・

Do not drop UIM or subject it to shocks.

- May cause malfunction.

・

Do not bend UIM or place heavy objects on it.

- May cause malfunction.

・

Do not install UIM into FOMA terminal with a label or

sticker put on.

- May cause malfunction.

・

This FOMA terminal is equipped with the security

features, that are compliant with Bluetooth standards

for communication via Bluetooth. However,

depending on the settings, there may not be enough

security. Be aware of security risks when using

Bluetooth.

・

DOCOMO assumes no responsibility for any

information which may be leaked during

communication via Bluetooth.

・

You can use headset, handsfree, audio, keyboard,

dial-up connection, data transfer, serial port, image

transfer or health devices with FOMA terminal. An

audio/video remote control may be available with an

audio device (only Bluetooth compatible devices).

・

Frequency bands

Frequency bands used by FOMA terminal Bluetooth

function are as below.

2.4 : Radio equipment that uses the 2400 MHz band.

FH : The modulation is the FH-SS method.

1 : The expected interference distance is 10 m or

shorter.

: All bandwidths between 2400 MHz

and 2483.5 MHz are used, and the bandwidth used by

mobile object identification devices cannot be

avoided.

Adapter

UIM

Bluetooth

devices

2.4FH1

F-11C_EN_ninshou

Introduction

Cautions on using Bluetooth devices

In the bandwidth used by this terminal, in addition to

home electric appliances such as a microwave oven and

industrial/scientific/medical devices, in-plant radio

stations used to identify mobile objects used in

production lines of a factory that require a license,

specified low power radio stations, or amateur radio

stations that do not require a license (hereafter "other

radio stations") can be in operation.

1. Before using this terminal, check whether other radio

stations are in operation in your neighborhood.

2. If radio wave interference occurs between the

terminal and "other radio stations", use the terminal

in a different location or "Turn the power OFF" to

avoid the radio wave interference.

3. For details, contact "General Inquiries" on the last

page of this manual.

・

FeliCa reader/writer function of FOMA terminal uses

weak waves requiring no licenses for radio stations.

・

It uses 13.56 MHz frequency band. When using other

reader/writers in your surroundings, keep FOMA

terminal away sufficiently from them. Before using

the FeliCa reader/writer, confirm that there are no

radio stations using the same frequency band nearby.

・

FM transmitter of FOMA terminal uses weak waves

requiring no licenses for radio stations.

・

It uses 77.4 - 85.0MHz frequency band. To use it, set

frequency not to common to FM radio station of the

area you use to avoid affecting FM radio users in

neighborhood.

FeliCa reader/writer

FM transmitter

F-11C_EN_ninshou

Introduction

・

Do not use a remodeled FOMA terminal. Using a

remodeled terminal violates the Radio Law.

FOMA terminal is certified according to technical

standard conformance of specified wireless

equipment based on the Radio Law, and as a proof of

it, the "Technical Compliance Mark " is depicted on

the engraved sticker of FOMA terminal.

If you remodel FOMA terminal by removing its screws,

your certification of technical standard conformance

becomes invalid.

Do not use FOMA terminal with its certification of

technical standard conformance invalid as it violates

the Radio Law.

・

Be careful when you use FOMA terminal while driving

a car etc.

Using a mobile phone while driving is subject to penal

regulations.

However, absolutely necessary cases such as rescue

of a sick person or maintaining public's safety are

exempted.

・

Use the Bluetooth function only in Japan.

The Bluetooth function of the FOMA terminal is

compliant with wireless standards and is authorized

for use only in Japan.

If you use this function overseas, you may be

punished.

・

Use FeliCa reader/writer function only in Japan.

FeliCa reader/writer function of FOMA terminal

conforms to Japanese radio standards.

If you use this function overseas, you may be

punished.

・

Use FM transmitter only in Japan.

FM transmitter of FOMA terminal is compliant with

wireless standards and is authorized for use only in

Japan.

If you use this function overseas, you may be

punished.

CAUTION

F-11C_EN_ninshou

Introduction

Waterproof/Dustproof function

F-11C provides waterproofness of IPX5*1,

IPX8*2 and dustproofness of IP5X*3 with

firmly closing the external connection jack

cap and installing the back cover in a locked

state.

IPX5 means that a phone keeps functioning after

applying a jet flow of 12.5 L/min. from every

direction from a distance of approximately 3 m for at

least 3 minutes using water nozzle in 6.3 mm inner

diameter.

For F-11C, IPX8 means that a phone keeps

functioning after F-11C is slowly submerged to

depth of 1.5m in static tap water at room

temperature, left there for 30 minutes and then taken

out, and the mobile phone keeps shooting still

images or moving pictures in approximately 30

minutes in static tap water at room temperature.

IP5X means a protection degree that a phone keeps

functioning and safety after it is placed in a device

with dust in diameter 75

or less for 8 hours,

agitated and then taken out.

✜

What you can do with waterproofness/

dustproofness of F-11C

・

You can talk or watch 1Seg programs without

using an umbrella in the rain (for rainfall of 20

mm or less per hour).

- When your hands or the FOMA terminal are

wet, avoid installing/removing the back cover

or opening/closing the external connection

jack cap.

・

You can also shoot still images and moving

pictures in the pool depth of 1.5 m.

- Do not perform other operations underwater

than shooting still images and moving

pictures.

- If you put the terminal in water of swimming

pool, be sure to have it within 30 minutes.

- If FOMA terminal gets wet with water from the

swimming pool, wash it in specified procedure

(

⇒

P23).

・

You can use FOMA terminal in a bathroom.

- Do not put the terminal in the bathtub. Do not

use the terminal in hot water. May cause

malfunction.

- Never put FOMA terminal in hot spring water

or water containing soap, detergent or bath

powder.

To ensure waterproofness/

dustproofness

To avoid water/dust ingress, be sure to

observe the following points.

・

Do not throw any liquid other than room-

temperature tap water on FOMA terminal, or

soak it in such liquid.

・

When using the external connection jack, pull

the cap up with your finger by the groove as

shown in the illustration.

Groove

F-11C_EN_ninshou

Introduction

After using the external connection jack, close

the cap as the direction shown in the, and make

sure that the cap is completely closed without

slack by pushing the tab in.

・

For installing the back cover, see "Installing back

cover" of "Attaching UIM/battery pack".

⇒

P26

・

Securely lock the back cover and firmly close the

external connection jack cap. Even a fine

obstacle (one hair, one grain of sand, tiny fiber,

etc.) put between contact surfaces may allow

water to enter.

・

Do not poke the microphone, earpiece or

speaker with a swab or sharp object.

・

Do not let FOMA terminal fall. It may become

scratched causing the waterproof/dustproof

performance to degrade.

・

The external connection jack cap and the rubber

packing of the rear side of the back cover play an

important role for keeping waterproof

performance. Do not deform the back cover by

twisting etc. or peel off or damage the rubber

packing. Also, prevent dust from adhering to it.

To keep FOMA terminal waterproofness/

dustproofness, replacement of parts is required

every 2 years regardless of whether FOMA

terminal appears normal or abnormal.

DOCOMO replaces the parts as a chargeable

service. Bring FOMA terminal to a sales outlet

such as a DOCOMO-specified repair office.

Important precautions

Do not perform actions shown in the

illustrations below.

Observe the following precautions to use

FOMA terminal properly.

・

Accessories and optional devices are not

waterproof/dustproof. When watching 1Seg etc.

with FOMA terminal installed in the included

desktop holder, do not use it in a bathroom,

shower room, kitchen or lavatory even if it is not

connected to the AC adapter.

・

Do not apply water flow stronger than allowed (

⇒

P21) (e.g., such water flow that gives you pain

when applied to your skin directly from a faucet

or shower). F-11C provides IPX5 waterproof

performances. However, it causes malfunction.

・

If FOMA terminal gets wet with salt water, sea

water, refreshing beverage or mud or soil

adhered, wash it immediately. If they dry out, it

is hard to remove the dirt and it may cause

damage or malfunction.

・

Do not put FOMA terminal in hot water, use it in

a sauna or apply hot airflow (from a hair dryer

etc.) to it.

Tab

Using Soap/Detergent/

Bath powder

Soaking in

ocean water

Applying strong

water flow

Using in

hot spring

Machine-washing

Washing with

brush/sponge

F-11C_EN_ninshou

Introduction

・

Do not move in water or slam the terminal

against the surface of water with FOMA terminal

opened.

・

If you put the terminal in tap water or in water of

swimming pool, be sure to have it within 30

minutes.

・

When you use the terminal in swimming pool,

obey rules of the facility.

・

FOMA terminal does not float on water.

・

Do not leave water on FOMA terminal. May

short-circuit the power jacks, or in a cold region,

water may freeze causing malfunction.

・

Do not leave water on the microphone, earpiece

or speaker. Such water may interfere with

talking.

・

Do not leave water on the temperature/humidity

sensor. Measuring temperature and humidity

may not be correct.

・

If the back cover is damaged, replace it. Water

may enter inside from a damaged section

causing troubles such as electric shocks or

corrosion of the battery.

・

If FOMA terminal gets wet with water or other

liquids with the external connection jack cap or

the back cover open, the liquid may get inside

the terminal causing electric shocks or

malfunction. Stop using FOMA terminal, turn

the power OFF, remove the battery pack and

contact a DOCOMO-specified repair office.

・

If the external connection jack cap, or the rubber

gasket on the rear side of the back cover is

damaged or deformed, replace it at DOCOMO-

specified repair office.

DOCOMO does not guarantee actual operations

under all states. Malfunctions deemed to be

caused by inappropriate operation by the

customer are not covered by the warranty.

With pressing and holding the external

connection jack cap not to open, wash the

terminal in tap water without rubbing hard.

・

Do not apply water flow stronger than allowed (

⇒

P21) (e.g., such water flow that gives you pain

when applied to your skin directly from a faucet

or shower).

・

In locked state with the back cover attached,

with pressing and holding the external

connection jack cap not to open, wash the

terminal in tap water in room temperature

without rubbing hard.

・

Do not use brush, sponge, soap, detergent, etc.

・

If mud or soil is adhered to the terminal, do not

open, close or rotate the terminal. Eliminate the

dirt first by shaking several times in tap water of

wash-basin and then wash the terminal with

running water.

・

After washing, wipe the surface with dry cloth

well, drain water by the following procedure and

let the terminal dry naturally.

Washing FOMA terminal

Press here

F-11C_EN_ninshou

Introduction

When FOMA terminal is wet, water may flow

out after wiping it off; drain the water in the

following steps.

Hold the hinge section of FOMA terminal firmly

and wipe off moisture on FOMA terminal

surface and back side with dry, clean cloth etc.

Shake FOMA terminal approximately 20 times,

firmly holding its hinge section, until there is

no more water splattering.

Draining water from FOMA

terminal

To drain water off the speaker,

shake FOMA terminal with the

speaker upward

F-11C_EN_ninshou

Introduction

Swing FOMA terminal in about 10 times

against dry, clean cloth etc. to wipe off water

remaining in the microphone, earpiece,

speaker, keypad, hinges or charging jack, etc.

In addition, swing the right side of the display

face against cloth about 10 times to wipe off

the water remaining in earpiece (right in the

illustration below).

Wipe off water drained from FOMA terminal

with dry, clean cloth etc., and dry naturally.

･

Water, if any, remaining in FOMA terminal

may ooze up after wiping off.

･

Do not wipe off water remaining in gaps

directly with a cotton swab etc.

Check the following before and after

charging.

・

Check if FOMA terminal is not wet. Never try to

charge the battery pack when FOMA terminal is

wet.

・

Accessories and optional devices are not

waterproof/dustproof.

・

When charging the battery when or after FOMA

terminal is wet, adequately drain it and wipe off

water with a dry, clean cloth etc., before

connecting the accessory desktop holder or

opening the external connection jack cap.

・

When the external connection jack cap is

opened for charging, close the cap firmly after

charging. It is recommended to use the desktop

holder for charging to prevent water from

seeping inside from the external connection

jack.

・

Do not use the AC adapter or desktop holder in

a bathroom, shower room, kitchen, lavatory or

other highly humid area. May cause fire or

electric shock.

・

Do not touch the AC adapter or desktop holder

with wet hands. May cause electric shock.

Charging

F-11C_EN_ninshou

Basic Operation

Before Using

Attaching UIM/battery pack

After turning power OFF, close FOMA terminal

and hold it in your hand so that you can properly

attach UIM/battery pack.

✜

Removing back cover

✜

Attaching UIM

Point

･

The UIM (blue) is not available for this FOMA

terminal. If you have the UIM (blue), bring it to a

docomo Shop to replace.

✜

Installing battery pack

✜

Installing back cover

Back cover

Slide the lever in the arrow

direction to lock

Press and slide the back cover

in the arrow direction

by approx. 3 mm to remove

Tray

Corner cut

UIM

Pull the tab of the tray out until it clicks

Hold UIM with the IC side down,

align the corner cut with the tray to

set in, and then push the tray

With the label side up, fit

the convex parts to the

concave parts of the

FOMA terminal and insert

in the

direction, then

push in the

direction

to set in.

Convex parts

Concave parts

Fit the 8 tabs to the notches of the

FOMA terminal and push in the

direction

not forming any

clearance, then slide in the

direction

Slide the lever in the arrow

direction to lock

F-11C_EN_ninshou

Basic Operation

Before Using

Charging

The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to

charge the battery before using FOMA terminal.

Insert the connector of AC adapter

horizontally to the accessory desktop

holder, with the arrows mark side

upward

Unfold the power plug and insert it

into a 100V AC outlet

Close FOMA terminal and insert it into

the desktop holder

Check that the charging light turns on

After charging is completed, remove FOMA

terminal from the desktop holder.

Open the external connection jack cap

(

), hold the connector horizontally

with the arrows side upward and

insert it to the jack (

)

Unfold the power plug and insert it

into a 100V AC outlet

Check that the charging light turns on

When charging is over, pull out the power plug

from the outlet, and pull out from FOMA terminal

horizontally while pressing the release buttons on

both sides of the connector.

Charging using desktop holder

Charging using AC adapter

AC 100V

outlet

Release

buttons

Connector

AC adapter

Connector

Release

buttons

External

connection jack

adapter

F-11C_EN_ninshou

Basic Operation

Before Using

Turning power ON - Configuring default settin

Initial setting is an operation when FOMA terminal

is turned ON for the first time.

(2 sec. or more)

The Initial setting screen appears.

Set required items

[Complete]

If you exit without setting Change security

code and Request permit/deny., Initial setting

screen reappears when the power is turned

ON the next time.

On a confirmation screen of software

update function,

The stand-by display appears.

Point

･

If no operation is performed, the display light is

automatically turned off according to the settings in

Light time-out or eco mode setting. The display light

turns on again if there is any operation or incoming

call.

･

The battery usage state is automatically recorded

while using the FOMA terminal. The record is used

only for repair diagnosis.

Turning power off : f

(2 sec. or more)

Changing the initial setting : mehib

Changing screen display to English :

mehbfce

Select "English"

Before Using

Caller ID notification

Set whether to notify your phone number (caller

ID) to the other party's terminal when making a

voice call. Caller ID notification is set to "ON" at the

time of subscription.

ameg

TEL function

Dial/

Receive call setting

Caller ID

notification

Setting

ON or

OFF

Point

･

If you hear an announcement of requesting caller ID

when making a call, set Caller ID notification or add

prefix "186" to the phone number to call again.

Before Using

Checking Profile

Check a model name or own phone number.

For details of checking/changing a mail address,

refer to "Mobile Phone User's Guide [i-mode]

FOMA version".

ame0

Profile

User information screen appears.

Point

Editing the profile :

On User information screen,

Authenticate

Set required items

Checking a phone number during a call :

se0

F-11C_EN_ninshou

Basic Operation

Screen Explanation

Viewing display

The current state can be checked by the icon

appearing on the screen. Major icons are as

follows.

a Status area

Status icons appear. Select an area to display the

status menu.

⇒

P31

Battery level (Battery icon)

Signal strength (Antenna icon)

Self mode ON

In data transfer mode

Connecting to i-mode

AutoKeyLock ON

Infrared communication in operation

Bluetooth ON

The total calls cost exceeds the limit

Communication using handsfree-compatible

device in progress

Handsfree ON

Femtocell available

Touch operation OFF

Positioning with GPS

Location request setting

Unread Area Mail exists

In-area auto-send mail exists

Unread i-mode mail exists

Arrival i-concier information exists

Ample

charge

Almost exhausted

(Charge the battery)

Strong

Out of service area or where

radio waves do not reach

Weak

F-11C_EN_ninshou

Basic Operation

Unreceived i-mode mail exists in i-mode

Center

Using Smart Browser

A phonebook entry, memo or schedule has

secret attribute

Music&Video Channel program obtaining

reservation exists

High-pitched alarm is "ON"

Kid-safe mode ON

During i-

ppli operation

ppli call exists

Communication mode ON (USB cable

connected)

Alarm is set

1Seg watching/recording reserved or alarm

of Memo is set

Inside OFFICEED area

Manner mode ON

Call alert volume OFF

Vibration mode for voice call ON

In Public mode (Drive mode)

Manner support ON

Record message setting ON

Keypad dial lock ON

Personal data lock ON

IC card lock ON

Recording 1Seg in the FOMA terminal

eco mode ON

microSD card inserted

Connected to external device using USB

cable

Pedometer/ACT monitor is set

Software update rewrite notice

Auto-update of latest pattern definition

failure

b Task area

Icons indicating running features (tasks) appear.

c New arrival

Starting from the left, missed call, recorded

message, message in voice mail service, unread

mail, unread ToruCa, i-

ppli call

d Machi-chara

Characters moving about the screen and giving

messages. In addition to the preinstalled

characters, you can obtain characters by

downloading.

e Stand-by disp layout

Clock, weather forecast, thermo-hygrometers

(TempHmd), Pedometer/Physical Activity

Monitor, Calendar, Schedule, Memo, icon to

activate i-concier, i-Channel ticker, graffiti pasted

on the stand-by display. Touch and hold the

screen for 1 second or more to display stand-by

elements palette/stand-by handwriting palette,

and edit freely with touch or slide operations.

f Stand-by launcher

Button to activate functions displayed on the

stand-by display (vertical).

⇒

P31

F-11C_EN_ninshou

Basic Operation

Screen Explanation

Basic operations for screen and keys

On the stand-by display, select

and then

perform the functions from the menu. You can select

a menu item with shortcut operations, which use the

keypad, etc. or with multi-cursor operation, which

uses the multi-cursor key to move the cursor.

Selecting "Calculator"

Shortcut operations

ame6e2

Multi-cursor key operations

ame

Move the cursor to "

Tool"

[OK]

Move the cursor to "

Calculator"

[OK]

Point

･

To return to the previous screen, press

. To

return to the stand-by display, press

Operations that

can be

performed by

pressing

and

are

displayed in the

guide area.

Terms

indicated with

[ ] in the

instructions of this manual are items displayed in

the guide area.

Select an arrival information etc. on the stand-by

display using

and

to quickly display the

corresponding information.

Menu operation Guide area

Focus mode

Guide area

F-11C_EN_ninshou

Basic Operation

Screen Explanation

Quick voice activation

When you do not know a desired menu of function

or you want to activate the function quickly, the

function can be activated by voice sound input

from the stand-by display. (In Japanese only)

(1 sec. or more)

For the first activation, on the guidance

screen, select "

利用する

(Use)" or press

From the second time, "

それではどうぞ ★★

音声受付中★★

" (Please go ahead

★★

voice

input available

★★

) is displayed.

Speak a function name toward the

microphone within 10 seconds.

When a message asking for re-entry appears,

press

and speak again.

When the voice input is recognized, the

function activates. If the function is not

identified, the keyword list of

使いかたガイド

(Guide) appears.

Point

･

Speak clearly with natural conversation speed.

･

Depending on the environment or way of speaking,

recognition result may vary.

･

You can speak function name (

電卓

(Calculator),

ワン

セグ

(1Seg), etc.), keyword (

計算

(calculation),

テレビ

(TV),

アドレス交換

(address exchange), etc.) or

combination of keywords (

写真見る

(view photo),

メール問合せ

(mail check),

スケジュール

月

日

(schedule 25th April),

○○さん

にメール

(mail to Mr.

○○

), etc.) to activate the function.

* Name registered to the phonebook

Screen Explanation

使いかたガイド

(Guide)

You can check outline of function, operations or

troubleshooting. (In Japanese only)

amef

Tool

Guide

Select a

search method

目次 (Contents) :

Search from a list of

functions.

索引 (Index) :

Search from a list of words

sorted according to Japanese syllabary.

フリーワード検索 (Free word search) :

Enter a keyword to search for.

ブックマーク (Bookmark) :

Search from a

list of registered bookmarks.

困ったときには (Troubleshooting) :

from lists of troubles or error messages.

その他のご案内 (More information) :

Access to guide page introducing useful site.

Point

･

On a description screen, select "

この機能を使う

(Use

this function)" to perform a function. Selecting a link

item in "

関連機能

(related functions)" or "

→コチラ

(See more)" displays a corresponding description

screen.

F-11C_EN_ninshou

103

Others

Appendix

Specific Absorption Rate (SAR) of Mobile Phones

This model F-11C mobile phone complies with

Japanese technical regulations and international

guidelines regarding exposure to radio waves.

This mobile phone was designed in observance of

Japanese technical regulations regarding exposure to

radio waves (

) and limits to exposure to radio waves

recommended by a set of equivalent international

guidelines. This set of international guidelines was set

out by the International Commission on Non-Ionizing

Radiation Protection (ICNIRP), which is in collaboration

with the World Health Organization (WHO), and the

permissible limits include a substantial safety margin

designed to assure the safety of all persons, regardless

of age and health condition.

The technical regulations and international guidelines

set out limits for radio waves as the Specific

Absorption Rate, or SAR, which is the value of

absorbed energy in any 10 grams of tissue over a 6-

minute period. The SAR limit for mobile phones is 2.0

W/kg. The highest SAR value for this mobile phone

when tested for use at the ear is 0.657 W/kg. There may

be slight differences between the SAR levels for each

product, but they all satisfy the limit.

The actual SAR of this mobile phone while operating

can be well below that indicated above. This is due to

automatic changes to the power level of the device to

ensure it only uses the minimum required to reach the

network. Therefore in general, the closer you are to a

base station, the lower the power output of the device.

This mobile phone can be used in positions other than

against your ear. This mobile phone satisfies the

international guidelines when used with a carrying

case or a wearable accessory approved by NTT

DOCOMO, INC.(

) In case you are not using the

approved accessory , please use a product that does

not contain any metals, and one that positions the

mobile phone at least 1.5 cm away from your body.

The World Health Organization has stated that present

scientific information does not indicate that there are

harmful effects attributed to the use of mobile devices.

They recommend that if you are worried about your

exposure then you can limit your usage or simply use

a hands-free kit to keep the mobile device away from

the head and body.

Please refer to the WHO website if you would like more

detailed information.

http://www.who.int/docstore/peh-emf/publications/

facts_press/fact_english.htm

Please refer to the websites listed below if you would

like more detailed information regarding SAR.

Ministry of Internal Affairs and Communications Website:

http://www.tele.soumu.go.jp/e/sys/ele/index.htm

Association of Radio Industries and Businesses

Website: http://www.arib-emf.org/index02.html (in

Japanese only)

NTT DOCOMO, INC. Website: http://

www.nttdocomo.co.jp/english/product/sar/

FUJITSU LIMITED Website: http://www.fmworld.net/

product/phone/sar/

Technical regulations are defined by the Ministerial Ordinance

Related to Radio Law (Article 14-2 of Radio Equipment

Regulations).

Regarding the method of measuring SAR when using mobile

phones in positions other than against the ear, international

standards (IEC62209-2) were set in March of 2010. On the

other hand, technical regulation is currently being deliberated

on by national council. (As of September, 2010)

F-11C_EN_ninshou

104

Others

The product "F-11C" is declared to conform with the

essential requirements of European Union Directive

1999/5/EC Radio and Telecommunications Terminal

Equipment Directive 3.1(a), 3.1(b) and 3.2. The

Declaration of Conformity can be found on http://

www.fmworld.net/product/phone/doc/.

This mobile phone complies with the EU requirements

for exposure to radio waves.

Your mobile phone is a radio transceiver, designed and

manufactured not to exceed the SAR

limits

for

exposure to radio-frequency(RF) energy, which SAR

value, when tested for compliance against the

standard was 1.140W/kg. While there may be

differences between the SAR

levels of various phones

and at various positions, they all meet

***

the EU

requirements for RF exposure.

* The exposure standard for mobile phones

employs a unit of measurement known as the

Specific Absorption Rate, or SAR.

** The SAR limit for mobile phones used by the

public is 2.0 watts/kilogram (W/Kg) averaged over

ten grams of tissue, recommended by The

Council of the European Union. The limit

incorporates a substantial margin of safety to

give additional protection for the public and to

account for any variations in measurements.

*** Tests for SAR have been conducted using

standard operation positions with the phone

transmitting at its highest certified power level in

all tested frequency bands. Although the SAR is

determined at the highest certified power level,

the actual SAR level of the phone while operating

can be well below the maximum value. This is

because the phone is designed to operate at

multiple power levels so as to use only the power

required to reach the network. In general, the

closer you are to a base station antenna, the

lower the power output.

･

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions :

this device may not cause harmful interference, and

this device must accept any interference received,

including interference that may cause undesired

operation.

･

Changes or modifications made in or to the radio

phone, not expressly approved by the manufacturer,

will void the user's authority to operate the equipment.

Declaration of Conformity

Federal Communications

Commission (FCC) Notice

F-11C_EN_ninshou

105

Others

This model phone meets the U.S. Government's

requirements for exposure to radio waves.

This model phone contains a radio transmitter and

receiver. This model phone is designed and manufactured

not to exceed the emission limits for exposure to radio

frequency (RF) energy as set by the FCC of the U.S.

Government. These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for

the general population. The guidelines are based on

standards that were developed by independent scientific

organizations through periodic and thorough evaluation

of scientific studies.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate (SAR). The SAR limit set by the FCC is

1.6 W/kg. Tests for SAR are conducted using standard

operating positions as accepted by the FCC with the

phone transmitting at its highest certified power level

in all tested frequency bands. Although the SAR is

determined at the highest certified power level, the

actual SAR level of the phone while operating can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels

so as to use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output level

of the phone.

Before a phone model is available for sale to the public,

it must be tested and certified to prove to the FCC that

it does not exceed the limit established by the U.S.

government-adopted requirement for safe exposure.

The tests are performed on position and locations (for

example, at the ear and worn on the body) as required

by FCC for each model. The highest SAR value for this

model phone as reported to the FCC, when tested for

use at the ear, is 1.450W/kg, and when worn on the

body, is 0.455W/kg. (Body-worn measurements differ

among phone models, depending upon available

accessories and FCC requirements).

While there may be differences between the SAR levels

of various phones and at various positions, they all

meet the U.S. government requirements.

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Equipment Authorization

Search section at http://www.fcc.gov/oet/ea/fccid/ (please

search on FCC ID VQK-F11C).

For body worn operation, this phone has been tested

and meets the FCC RF exposure guidelines when used

with an accessory designated for this product or when

used with an accessory that contains no metal and

which positions the handset at a minimum distance of

1.5 cm from the body.

In the United States, the SAR limit for wireless mobile phones

used by the general public is 1.6 Watts/kg (W/kg), averaged

over one gram of tissue. SAR values may vary depending upon

national reporting requirements and the network band.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

FCC RF Exposure Information

F-11C_EN_ninshou

106

Others

AIRCRAFT

Switch off your wireless device when boarding an

aircraft or whenever you are instructed to do so by

airline staff. If your device offers flight mode or similar

feature consult airline staff as to whether it can be used

on board.

DRIVING

Full attention should be given to driving at all times

and local laws and regulations restricting the use of

wireless devices while driving must be observed.

HOSPITALS

Mobile phones should be switched off wherever you

are requested to do so in hospitals, clinics or health

care facilities. These requests are designed to prevent

possible interference with sensitive medical

equipment.

PETROL STATIONS

Obey all posted signs with respect to the use of

wireless devices or other radio equipment in locations

with flammable material and chemicals. Switch off

your wireless device whenever you are instructed to do

so by authorized staff.

INTERFERENCE

Care must be taken when using the phone in close

proximity to personal medical devices, such as

pacemakers and hearing aids.

Pacemakers

Pacemaker manufacturers recommend that a

minimum separation of 15 cm be maintained between

a mobile phone and a pace maker to avoid potential

interference with the pacemaker. To achieve this use

the phone on the opposite ear to your pacemaker and

does not carry it in a breast pocket.

Hearing Aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you

may want to consult your hearing aid manufacturer to

discuss alternatives.

For other Medical Devices :

Please consult your physician and the device

manufacturer to determine if operation of your phone

may interfere with the operation of your medical

device.

Important Safety Information

Appendix

Export Administration Regulations

This product and its accessories may be under

coverage of the Export Administration

Regulations of Japan ("Foreign Exchange and

Foreign Trade Control Laws" and the related laws

and regulations). When exporting this product

and its accessories, take necessary procedures on

your responsibility and expense. For details,

contact Ministry of Economy, Trade and Industry

of Japan.

F-11C_EN_ninshou

107

Others

Appendix

Intellectual Property Right

Except for the case protected by copyright laws such as

personal use, use of FOMA terminal to reproduce,

alter, or publicly transmit recorded pictures or sounds,

or copyrighted text, images, music or software

downloaded from websites without the copyright

holder's authorization is prohibited.

Note that taking photos or recordings at some

demonstrations, performances or exhibitions may be

prohibited even when only for personal use.

Avoid taking pictures of others with FOMA terminal

without their consent or disclosing recorded pictures

of others without their consent to general public

through Internet websites etc., because they may

infringe on portrait rights.

Company and product names mentioned in this

manual are trademarks or registered trademarks of

their respective holders.

･

"FOMA", "i-mode", "i-

ppli", "i-motion", "Deco-mail",

"Chara-den", "ToruCa", "mopera", "WORLD CALL",

"WORLD WING", "OFFICEED", "2in1", "docomo

SMART series" and logos of "FOMA", "i-mode", "i-

ppli", "Music&Video Channel", "iC" are trademarks

or registered trademarks of NTT DOCOMO.

･

"Catch Phone (Call waiting service)" is a registered

trademark of Nippon Telegraph and Telephone

Corporation.

･

McAfee

is registered trademarks or trademarks of

McAfee, Inc. and/or its affiliates in the US and/or

other countries.

･

Rovi, G-GUIDE, G-GUIDE MOBILE and G-

Guide related logos are trademarks or

registered trademarks of Rovi Corporation and/or its

subsidiaries in Japan.

･

Contains Adobe

Flash

Player, Adobe

Flash

Lite

and Adobe Reader

Mobile

technology by Adobe Systems Incorporated. Adobe

Flash Player Copyright

1996-2011 Adobe Systems

2003-2011 Adobe Systems

Mobile Copyright

1993-2011 Adobe Systems

Reader, Flash and Flash Lite are either registered

trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other

countries.

･

This product contains

NetFront Browser,

NetFront Document

Viewer and NetFront Sync Client of ACCESS CO.,

LTD.

ACCESS, the ACCESS logo and NetFront are

registered trademarks or trademarks of ACCESS

CO., LTD. in the United States, Japan and/or other

countries.

2011 ACCESS CO., LTD. All rights

reserved.

･

™

JBlend and JBlend-related trademarks are

trademarks or registered trademarks of Aplix

Corporation in Japan and other countries.

Copyrights and portrait rights

Trademarks

F-11C_EN_ninshou

108

Others

･

is a registered trademark of FeliCa Networks, Inc.

･

FeliCa is a registered trademark of Sony Corporation.

･

QR code is a registered trademark of Denso Wave

Inc.

･

microSDHC Logo is a trademark of SD-3C,

LLC.

･

"Multitask" is a registered trademark of NEC

Corporation.

･

QuickTime is a registered trademark of Apple Inc., in

the US and other countries.

･

Microsoft

, Windows

, Windows Media

, Windows

Vista

and PowerPoint

are trademarks or

registered trademarks of "Microsoft Corporation" in

the US and other countries.

･

Microsoft Excel and Microsoft Word are product

names of Microsoft Corporation in the U.S.A. In this

manual, they may be described as Excel and Word.

･

The abbreviations of operating systems (Japanese

versions) below are used in this manual.

- Windows 7 stands for Microsoft

Windows

(Starter, Home Basic, Home Premium,

Professional, Enterprise and Ultimate).

- Windows Vista stands for Windows Vista

(Home

Basic, Home Premium, Business, Enterprise and

Ultimate).

- Windows XP indicates the Microsoft

Windows

XP Professional operating system or Microsoft

Windows

XP Home Edition operating system.

･

Google and Google Map for Mobile are trademarks

of Google Inc.

･

The Bluetooth word mark and logos are owned by

the Bluetooth SIG, Inc. and any use of such marks by

NTT DOCOMO, Inc. is under license. Other

trademarks and names are those of their respective

owners.

･

"CROSS YOU" is a trademark of Sony Corporation.

･

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

･

iWnn of OMRON SOFTWARE Co., Ltd. is used for

conversion methods for Japanese language, and for

phrase prediction methods for English.

iWnn

OMRON SOFTWARE Co., Ltd. 2008-2011 All

Rights Reserved.

･

"AXIS Font" is a trademark of AXIS Inc.,

and the "AXIS" font is a font developed by Type

Project Inc.

･

This product contains software licensed by Symbian

Foundation Limited.

Symbian is a registered trademark of Symbian

Foundation Limited.

･

"Privacy mode" is a registered trademark of FUJITSU

LIMITED.

･

"Uni-Type" is a universal designed font jointly-

developed by LIM Corp., Ltd. and Faculty of

Engineering, Chiba University.

Uni-Type is a registered trademark of LIM Corp., Ltd.

･

丸ゴシック

(Maru Gothic)", "

レイミン

(Reimin)" and

丸フォーク

(Maru Fork)" are provided by Morisawa

& Company, Ltd. and the copyrights of these font

data belong to them. Names of "

レイミン

(Reimin)"

and "

丸フォーク

(Maru Fork)" are their trademarks.

･

OBEX

™

, IrSimple

™

, IrSS

™

and

IrSimpleShot

™

are trademarks of Infrared

Data Association

･

Blu-ray Disc and its logo are trademarks.

･

DVM

™

is a trademark of microphone

directionality control technology of

DiMAGIC (DiMAGIC Co., Ltd.).

･

Other company and product names mentioned in

this manual are trademarks or registered trademarks

of their respective holders.

F-11C_EN_ninshou

109

Others

･

This product contains a module developed by the

Independent JPEG Group.

･

FeliCa is a contactless IC card technology developed

by Sony Corporation.

･

This product is equipped with the technologies of

GestureTek, Inc.

2006-2010, GestureTek, Inc. All Rights

Reserved.

･

OMRON Corporation's Mobile OmCR is used for a

character recognition engine.

･

This product contains software licensed based on

Apache License V2.0. and altered as necessary by

NTT DOCOMO, INC.

This product contains software licensed complying

with GNU Lesser General Public License (LGPL), etc.

For more details, on the FOMA terminal,

⇒

6#1

⇒

その他

" to see in "

オープンソース

ライセンス

The source code of the used open source software is

disclosed according to the rules of LGPL (http://

www.gnu.org/licenses/). For more details, refer to

the information on this product in the following site.

http://www.fmworld.net/product/phone/

●●●●●

●●●

･

This product is licensed based on MPEG-4 Visual

Patent Portfolio License. The use of MPEG-4 Video

Codec function is allowed for personal and nonprofit

use only in the cases below.

- Recording moving pictures and i-motion that

conform to MPEG-4 Visual Standard (hereinafter

referred to as MPEG-4 Video)

- Playing MPEG-4 Videos recorded personally by

consumers not engaged in profit activities

- Playing MPEG-4 Video supplied from the provider

licensed from MPEG-LA

For further utilizing such as promotion, in-house

use or profit-making business, please contact

MPEG LA, LLC in U.S.

･

Content owners use Windows Media digital rights

management technology (WMDRM) to protect their

intellectual property, including copyrights. This

device uses WMDRM software to access WMDRM-

protected content. If the WMDRM software fails to

protect the content, content owners may ask

Microsoft to revoke the software's ability to use

WMDRM to play or copy protected content.

Revocation does not affect unprotected content.

When downloading licenses for protected content,

you agree that Microsoft may include a "Revocation

List" with the licenses. Content owners may require

you to upgrade WMDRM to access their content. If

you decline an upgrade, you cannot access a content

that requires the upgrade.

･

The HMM-Based Speech Synthesis Engine

embedded in this product uses the Simplified BSD

License.

--------------------------------------------

The HMM-Based Speech Synthesis System (HTS)

hts_engine API developed by HTS Working Group

http://hts-engine.sourceforge.net/

--------------------------------------------

2001-2010 Nagoya Institute of

Technology, Department of Computer Science

2001-2008 Tokyo Institute of Technology,

Interdisciplinary Graduate School of Science and

Engineering

Redistribution and use in source and binary forms,

with or without modification, are permitted provided

that the following conditions are met:

- Redistributions of source code must retain the

above copyright notice, this list of conditions and

the following disclaimer.

- Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and

the following disclaimer in the documentation and/

or other materials provided with the distribution.

Others

F-11C_EN_ninshou

110

Others

- Neither the name of the HTS working group nor the

names of its contributors may be used to endorse

or promote products derived from this software

without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

HOLDERS AND CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

International call access code

for the country you stay

Repairs

General Inquiries

Failures encountered overseas

Loss or theft of FOMA terminal or payment of cumulative cost overseas

* Service available in: English, Portuguese, Chinese, Spanish, Korean.

* Unavailable from part of IP phones.

(Business hours : 9:00 a.m. to 8:00 p.m. (open all year round))

0120-005-250 (toll free)

(Business hours : 9:00 a.m. to 8:00 p.m.)

* Unavailable from part of IP phones.

■

From land-line phones (In Japanese only)

0120-800-000 (toll free)

* Unavailable from land-line phones, etc.

(No prefix) 151 (toll free)

■

From DOCOMO mobile phones (In Japanese only)

●

Please confirm the phone number before you dial.

●

For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo

shop etc. near you on the NTT DOCOMO website or the i-mode site.

(available 24 hours a day)

* You are charged a call fee to Japan when calling from a land-line phone, etc.

※

If you use F-11C, you should dial the number 㧗81-3-6832-6600

(to enter '㧗', press and hold the '0' key for at least one second).

* You are charged a call fee to Japan when calling from a land-line phone, etc.

※

If you use F-11C, you should dial the number 㧗81-3-6718-1414

(to enter '㧗', press and hold the '0' key for at least one second).

■

From land-line phones <Universal number>

●

If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal.

●

If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.

* You might be charged a domestic call fee according to the call rate for the country

you stay.

※

For international call access codes for major countries and universal number

international prefix, refer to DOCOMO International Services website.

Universal number

international prefix -8000120-0151

CA92002-XXXX

2011.X (1st Edition)

To prevent damage to the environment, bring

used battery packs to a docomo service counter,

a docomo agent or a recycle center.

-81-3-6832-6600

(toll free)

(Business hours : 24 hours (open all year round))

* Unavailable from part of IP phones.

■

From land-line phones (In Japanese only)

0120-800-000 (toll free)

* Unavailable from land-line phones, etc.

(No prefix) 113 (toll free)

■

From DOCOMO mobile phones (In Japanese only)

■

From land-line phones <Universal number>

* You might be charged a domestic call fee according to the call rate for the country

you stay.

※

For international call access codes for major countries and universal number

international prefix, refer to DOCOMO International Services website.

Universal number

international prefix -8005931-8600

NTT DOCOMO website http://www.nttdocomo.co.jp/english/

■

From DOCOMO mobile phones

i-mode site iMenu

⇒お客様サポート

(user support)

⇒ドコモショップ

(docomo Shop) * In Japanese only

International call access code

for the country you stay

(available 24 hours a day)

-81-3-6718-1414

(toll free)

■

From DOCOMO mobile phones

Don't forget your mobile phone ･･･ or your manners!

When using your mobile phone in a public place, don't forget to

show common courtesy and consideration for others around you.

Fujitsu F11C Mobile phone User Manual L09

Fujitsu Limited Mobile phone L09

manual

Navigation menu

Namespaces

Views

Navigation