Fujitsu Dx410 S2 Dx440 Users Manual ETERNUS Web GUI User's Guide DX80 S2/DX90 S2, S2/DX440 DX8100 S2/DX8700
2015-01-25
: Fujitsu Fujitsu-Dx410-S2-Dx440-S2-Users-Manual-218439 fujitsu-dx410-s2-dx440-s2-users-manual-218439 fujitsu pdf
Open the PDF directly: View PDF
Page Count: 1066 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Cover
- Preface
- Table of Contents
- List of Figures
- Chapter 1 Outline
- Chapter 2 Startup and Shutdown
- Chapter 3 Initial Setup
- Chapter 4 Configuration Settings
- Chapter 5 Volume Management
- 5.1 Volume Status
- 5.1.1 Volume (Basic Information)
- 5.1.2 Performance (Host I/O)
- 5.1.3 Performance (Advanced Copy)
- 5.1.4 LUN Group
- 5.1.5 Reservation
- 5.1.6 Pinned Data
- 5.1.7 Bad Sector
- 5.1.8 Balancing Thin Provisioning Volume
- 5.1.9 Volume Detail (Basic)
- 5.1.10 Volume Detail (Reservation)
- 5.1.11 Volume Detail (Pinned Data)
- 5.1.12 Volume Detail (Balancing TPV)
- 5.1.13 Volume Detail (LUN Concatenation)
- 5.1.14 Volume Detail (WSV Concatenation)
- 5.2 Functions in the Action Area for Volume
- 5.2.1 Create Volume
- 5.2.2 Delete Volume
- 5.2.3 Rename Volume
- 5.2.4 Format Volume
- 5.2.5 Expand Volume
- 5.2.6 Expand Thin Provisioning Volume
- 5.2.7 Start RAID Migration
- 5.2.8 Stop RAID Migration
- 5.2.9 Start Zero Reclamation
- 5.2.10 Stop Zero Reclamation
- 5.2.11 Delete Snap Data Pool Volume
- 5.2.12 Force Delete Snap Data Pool Volume
- 5.2.13 Modify Threshold Thin Provisioning Volume
- 5.2.14 Initialize Snap Data Volume
- 5.2.15 Encrypt Volume
- 5.2.16 Forbid Advanced Copy
- 5.2.17 Permit Advanced Copy
- 5.2.18 Modify Cache Parameters
- 5.2.19 Export Cache Parameters
- 5.2.20 Export Performance Information
- 5.2.21 Release Reservation
- 5.2.22 Start Balancing Thin Provisioning Volume
- 5.2.23 Stop Balancing Thin Provisioning Volume
- 5.1 Volume Status
- Chapter 6 RAID Group Management
- Chapter 7 Thin Provisioning Pool Management
- 7.1 Thin Provisioning Pool Status
- 7.1.1 Thin Provisioning Pool (Basic Information)
- 7.1.2 Threshold (Thin Provisioning Pool)
- 7.1.3 ECO Mode Schedule (Thin Provisioning Pool)
- 7.1.4 License (Thin Provisioning)
- 7.1.5 Flexible Tier Pool (Basic Information)
- 7.1.6 Thin Provisioning Pool Detail (Basic)
- 7.1.7 Flexible Tier Pool Detail (Basic)
- 7.1.8 Flexible Tier Pool Detail (Flexible Tier Sub Pool)
- 7.1.9 Flexible Tier Pool Detail (Volume)
- 7.1.10 Flexible Tier Sub Pool Detail (Basic)
- 7.2 Functions in the Action Area for Thin Provisioning
- 7.2.1 Create Thin Provisioning Pool
- 7.2.2 Delete Thin Provisioning Pool
- 7.2.3 Rename Thin Provisioning Pool
- 7.2.4 Expand Thin Provisioning Pool
- 7.2.5 Format Thin Provisioning Pool (All Area)
- 7.2.6 Format Thin Provisioning Pool (Unformatted Area)
- 7.2.7 Modify Threshold Thin Provisioning Pool
- 7.2.8 Modify Cache Parameters (Thin Provisioning Pool)
- 7.2.9 Assign ECO Mode Schedule (Thin Provisioning Pool)
- 7.2.10 Register Thin Provisioning License
- 7.2.11 Delete Thin Provisioning License
- 7.2.12 Start Balancing Flexible Tier Pool
- 7.2.13 Stop Balancing Flexible Tier Pool
- 7.1 Thin Provisioning Pool Status
- Chapter 8 Advanced Copy Management
- 8.1 Advanced Copy Status
- 8.2 Functions in the Action Area for Advanced Copy
- 8.2.1 Required Settings for the Advanced Copy Function
- 8.2.2 Start SnapOPC+
- 8.2.3 Stop Copy Session
- 8.2.4 Register Advanced Copy License
- 8.2.5 Delete Advanced Copy License
- 8.2.6 Modify EC/OPC Priority
- 8.2.7 Modify Copy Table Size
- 8.2.8 Enable ODX
- 8.2.9 Disable ODX
- 8.2.10 Create ODX Buffer Volume
- 8.2.11 Modify Copy Parameters
- 8.2.12 Set Copy Path
- 8.2.13 Delete All Copy Path
- 8.2.14 Export All Copy Path
- 8.2.15 Export Storage Information
- 8.2.16 Convert Copy Path
- 8.2.17 Measure Round Trip Time
- 8.2.18 Modify REC Multiplicity
- 8.2.19 Modify REC Buffer
- 8.2.20 Assign REC Disk Buffer
- 8.2.21 Create REC Disk Buffer
- 8.2.22 Delete REC Disk Buffer
- 8.2.23 Format REC Disk Buffer
- Chapter 9 Connectivity Management
- 9.1 Connectivity Status
- 9.1.1 Structures for Host Connection
- 9.1.2 Connectivity (Basic Information)
- 9.1.3 Host Group
- 9.1.4 CA Port Group
- 9.1.5 LUN Group
- 9.1.6 Host Response
- 9.1.7 CA Reset Group
- 9.1.8 Host-LU QoS
- 9.1.9 Host Affinity Detail
- 9.1.10 Host Group Detail
- 9.1.11 LUN Group Detail
- 9.1.12 LUN Group : LU QoS Group Detail
- 9.1.13 Host-LU QoS Performance Information
- 9.2 Functions in the Action Area for Connectivity
- 9.2.1 Host Affinity Management
- 9.2.2 Host Group Management
- 9.2.2.1 Add FC/FCoE Host Group
- 9.2.2.2 Add iSCSI Host Group
- 9.2.2.3 Add SAS Host Group
- 9.2.2.4 Delete Host Group
- 9.2.2.5 Modify Host Group
- 9.2.2.6 Modify Host Group (FC/FCoE)
- 9.2.2.7 Modify Host Group (iSCSI)
- 9.2.2.8 Modify Host Group (SAS)
- 9.2.2.9 Add FC/FCoE Host
- 9.2.2.10 Add iSCSI Host
- 9.2.2.11 Add SAS Host
- 9.2.2.12 Delete FC/FCoE Host
- 9.2.2.13 Delete iSCSI Host
- 9.2.2.14 Delete SAS Host
- 9.2.2.15 Modify FC/FCoE Host
- 9.2.2.16 Modify iSCSI Host
- 9.2.2.17 Modify SAS Host
- 9.2.3 CA Port Group Management
- 9.2.3.1 Create FC Port Group
- 9.2.3.2 Create iSCSI Port Group
- 9.2.3.3 Create SAS Port Group
- 9.2.3.4 Create FCoE Port Group
- 9.2.3.5 Delete CA Port Group
- 9.2.3.6 Modify CA Port Group
- 9.2.3.7 Modify FC Port Parameters
- 9.2.3.8 Modify iSCSI Port Parameters
- 9.2.3.9 Modify SAS Port Parameters
- 9.2.3.10 Modify FCoE Port Parameters
- 9.2.3.11 Modify Port Mode
- 9.2.4 LUN Group Management
- 9.2.5 Host Response Management
- 9.2.6 Modify CA Reset Group
- 9.2.7 Host-LU QoS Management
- 9.2.7.1 Enable/Disable Host-LU QoS
- 9.2.7.2 Set Host-LU QoS
- 9.2.7.3 Release Host-LU QoS
- 9.2.7.4 Start Host-LU QoS Performance Monitoring
- 9.2.7.5 Stop Host-LU QoS Performance Monitoring
- 9.2.7.6 Set FC/FCoE Host QoS
- 9.2.7.7 Set iSCSI Host QoS
- 9.2.7.8 Set SAS Host QoS
- 9.2.7.9 Set FC Port QoS
- 9.2.7.10 Set iSCSI Port QoS
- 9.2.7.11 Set SAS Port QoS
- 9.2.7.12 Set FCoE Port QoS
- 9.2.7.13 Add LU QoS Group
- 9.2.7.14 Delete LU QoS Group
- 9.2.7.15 Modify LU QoS Group
- 9.1 Connectivity Status
- Chapter 10 Component Management
- 10.1 Component Status
- 10.1.1 Storage (Basic Information)
- 10.1.2 Controller Enclosure
- 10.1.2.1 Controller Module
- 10.1.2.2 Controller Module (Performance)
- 10.1.2.3 All Channel Adapters
- 10.1.2.4 Channel Adapter Ports (Performance)
- 10.1.2.5 Frontend Router
- 10.1.2.6 Backend Router
- 10.1.2.7 Service Controller
- 10.1.2.8 Power Supply Unit (CE)
- 10.1.2.9 Battery
- 10.1.2.10 FAN Unit
- 10.1.2.11 Operation Panel
- 10.1.3 Drive Enclosure
- 10.1.4 Disks
- 10.1.5 Controller Module Detail
- 10.1.6 Channel Adapter Detail
- 10.1.7 Frontend Router Detail
- 10.1.8 Backend Router Detail
- 10.1.9 BRT Expander Detail
- 10.1.10 Service Controller Detail
- 10.1.11 PSU/CPSU (CE) Detail
- 10.1.12 Battery Backup Unit Detail
- 10.1.13 FAN Unit Detail
- 10.1.14 Drive Enclosure Detail
- 10.1.15 I/O Module Detail
- 10.1.16 Power Supply Unit (DE) Detail
- 10.1.17 Disks Detail
- 10.1.18 QSFP Cable Detail
- 10.1.19 Boot and Utility Device Detail
- 10.1.20 CM Module Management Controller Detail
- 10.1.21 Port Detail
- 10.2 Functions in the Action Area for Component
- 10.2.1 Add Drive Enclosure
- 10.2.2 Turn on Locator Beacon/Turn off Locator Beacon
- 10.2.3 Add Channel Adapter Port
- 10.2.4 Assign Global Hot Spare
- 10.2.5 Release Global Hot Spare
- 10.2.6 Assign Dedicated Hot Spare
- 10.2.7 Release Dedicated Hot Spare
- 10.2.8 Export Performance Information
- 10.2.9 Clear Disk Error Statistics (All Disks)
- 10.2.10 Clear Disk Error Statistics (Selected Disks)
- 10.1 Component Status
- Chapter 11 System Management
- 11.1 System Status
- 11.1.1 System (Basic Information)
- 11.1.2 Network
- 11.1.3 Remote Support (REMCS) for Regions other than EMEA
- 11.1.4 Remote Support (AIS Connect) for Regions other than Japan
- 11.1.5 Key Management
- 11.1.6 Define Role
- 11.1.7 ECO Mode
- 11.1.8 Event/Dump
- 11.1.9 Audit Log
- 11.1.10 Storage Migration
- 11.1.11 Utility
- 11.1.12 System Settings
- 11.1.13 ECO Mode Schedule Detail
- 11.1.14 Path Group Detail Information
- 11.2 Functions in the Action Area for System
- 11.2.1 Change User Password
- 11.2.2 Set SSH Public Key
- 11.2.3 Network Management
- 11.2.3.1 Setup Network Environment
- 11.2.3.2 Setup Firewall
- 11.2.3.3 Setup SNMP Agent Basic Interface
- 11.2.3.4 Setup SNMP Manager
- 11.2.3.5 Setup SNMP Agent MIB Access View
- 11.2.3.6 Setup SNMP Agent User
- 11.2.3.7 Setup SNMP Agent Community
- 11.2.3.8 Setup SNMP Agent Trap
- 11.2.3.9 Download MIB File
- 11.2.3.10 Send SNMP Trap Test
- 11.2.3.11 Display SMTP Log
- 11.2.3.12 Setup E-Mail Notification
- 11.2.3.13 Setup Syslog
- 11.2.3.14 Setup SSH Server Key
- 11.2.3.15 Create Self-signed SSL Certificate
- 11.2.3.16 Create Key/CSR
- 11.2.3.17 Register SSL Certificate
- 11.2.4 Remote Support (REMCS) for Regions other than EMEA
- 11.2.5 Remote Support (AIS Connect) for Regions other than Japan
- 11.2.6 Key Management
- 11.2.6.1 Required Settings for the Key Management Function
- 11.2.6.2 Setup Key Management Machine Name
- 11.2.6.3 Add Key Server
- 11.2.6.4 Delete Key Server
- 11.2.6.5 Modify Key Server
- 11.2.6.6 Create Key Group
- 11.2.6.7 Delete Key Group
- 11.2.6.8 Modify Key Group
- 11.2.6.9 Update SED Authentication Key
- 11.2.6.10 Import SSL/KMIP Certificate
- 11.2.7 Define Role
- 11.2.8 ECO Mode Management
- 11.2.9 Event/Dump Management
- 11.2.10 Audit Log Management
- 11.2.11 Storage Migration Management
- 11.2.12 Utility Management
- 11.2.13 System Management
- 11.1 System Status
- Appendix A User Roles and Policies
- Appendix B Status List
- Appendix C Installing the Security Certificate
- Appendix D Naming Conventions of Volumes and Hosts
- Appendix E Basic Size and MWC Input Condition for RAID Groups
- E.1 Basic Size for each RAID Group
- E.1.1 Basic Size when Using the Default Stripe Depth Value (For Standard, TPV, or SDPV Type Volumes)
- E.1.2 Basic Size when Using the Default Stripe Depth Value (For WSV Type Volumes)
- E.1.3 Basic Size When Stripe Depth is Tuned (For Standard, TPV, or SDPV Type Volumes)
- E.1.4 Basic Size When Stripe Depth is Tuned (For WSV Type Volumes)
- E.2 Input Conditions for MWC
- E.1 Basic Size for each RAID Group
- Appendix F Automatic Controlling CM-CPU Setting
- Appendix G Using RADIUS Authentication
- Appendix H Estimated Advanced Copy Source Capacity
- Appendix I Storage Migration Setting Files
- Appendix J Factory Default List
- Appendix K Error Code
- Colophon