Fujitsu Ftp 628 Series Users Manual P128 139
FTP-628MCL001/002/003/004 ftp-628mcl001_002_003_004 Datasheet - Fujitsu United States
2015-01-25
: Fujitsu Fujitsu-Ftp-628-Series-Users-Manual-218996 fujitsu-ftp-628-series-users-manual-218996 fujitsu pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
BATTERY DRIVE, 2” HIGH SPEED THERMAL PRINTER
FTP-628 Series
■ OVERVIEW
The FTP-628 MCL Series is ultra compact high speed, battery
driven thermal printer, printing on 2-inch wide paper (58mm).
Paper can be easily set by an original platen release mechanism.
NO
TF
OR
DE
N
SI
E
GN W
The FTP-628 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and measurement
and medical equipment.
■ HIGHLIGHTS
• Ultra compact
Height 15.5 mm, width 69.9 mm, depth 35.7 mm
• High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing / Kanji supported
8 dots/mm of resolution printing is possible.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Auto loading is also available
on the MCL001 and MCL003 models.
• Two types of paper routes
Front and bottom paper feed.
• Easy mounting
Head, motor, sensor and other component wiring are unified
to one flexible cable, and the mechanism can be secured by
one hook and two screws at two locations, making mounting
easy.
1
FTP-628MCL Series
■ PART NUMBERS
Item
Part Number
Printer mechanism
FTP-628MCL001 (front paper insertion without head open detection switch
FTP-628MCL002 (bottom paper insertion without head open detection switch
FTP-628MCL003 (front paper insertion with head open detection switch and knob)
FTP-628MCL004 (bottom paper insertion with head open detection switch)
LSI for driving
FTP-628CU101
Interface
Board
ANK only
FTP-628DSL001 (not yet available)
Kanji
supported
FTP-628DSL102 Universal serial / Centronics with flash memory and Kanji
NO
TF
OR
DE
N
SI
E
GN W
■ SPECIFICATIONS
Item
Part number
Printing method
Dot structure
Specifications
FTP-628MCL001/002/003/004
Thermal-line dot method
384 dots/line
Dot pitch (Horizontal)
0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)
0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
48 mm
Number of columns
ANK 32 columns/line (maximum 12x 24 dot font)
Paper width
58 mm+0
-1
Paper thickness
60 to 80 µ m (some paper in this range may not be used because of
paper characteristics
Printing Speed
Maximum 60mm/sec. (480 dot line/sec.)
Character types
Alphanumeric, katakana:
International and special characters:
JIS Kanji level 1, level 2, non-Kanji
(supported only by FTP-628DSL102):
Character, dimensions (H×W), number of
columns
159 types
195 types
about 6800 types
12 × 24 dots, (1.5 × 3.0 mm), 32 columns: alphanumeric, katakana
24 × 24 dots, (3.0 × 3.0 mm), 16 columns: alphanumeric, katakana, Kanji
8 × 16 dots, (1.0 × 2.0 mm), 48 columns: alphanumeric, katakana
16 × 16 dots, (2.0 × 2.0 mm), 24 columns: alphanumeric, katakana, Kanji
2
FTP-628MCL Series
■ SPECIFICATIONS
Item
Interface
Conforms to RS232C / Centronics
For print head
Power
supply
Specification
4.2 - 8.5 VDC average current, 0.79 (1.3) A (print ratio:
12.5%, print speed: 60mm/sec.) ( ) is the peak value
For printer and cutter motor 4.2 - 8.5 VDC, 1A maximum
For logic
5 VDC ± 5%, 0.5 A maximum
Printer mechanism
69.6 x 34.3 x 15.5 mm (WxDxH) head down
Interface board
131 x 99 x 24 mm
Dimensions
NO
Weight (Mechanism)
Head life
Pulse resistance: 100 million pulses/dot (under our
standard conditions)
Abrasion resistance: paper traveling distance 50km
(print ratio: 25% or less)
TF
OR
DE
N
SI
E
GN W
Operating temperature
Operating
Operating humidity
environment
Storage temperature
Detection
function
Approximately 53g (without knob)
+5˚ C to +40˚ C (printing density assurance range,
operation is possible at 0˚ C to +40˚ C)
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
Storage humidity
5-95% RH (no condensation)
Head temperature
detection
Detected by thermistor
Paper out/mark detection
Detected by photo-interrupter (all models)
Head up detection
Detected by micro-switch (003, 004 only)
Recommended thermal sensitive paper
High sensitive paper: TF50KS-E4 (Nippon Paper)
Standard paper:
TF60KS-E (Nippon Paper) FTP-020PU001/ FTP-020P0104
PD150R (Oji Paper) FTP-020P0701
Medium life storage paper:
TF60KS-F1 (Nippon Paper) FTP-020P0102
PD170R (Oji Paper)
P220VBB-1 (Mitsubishi Paper)
PH65BC-3H (Oji Paper)
Long life storage paper:
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
3
FTP-628MCL Series
■ FUNCTION
Item
Item
1.
Test print function
8.
Cutter abnormality detection
2.
Paper out detection
9.
Motor power saving function
3.
Paper near end detection
10.
Mark detection function
4.
Head up detection
11.
MCU operation abnormality detection
5.
Thermal head temperature abnormality
detection
12.
Power ON/OFF sequence protection
Blow-out fuse detection
13.
Motor over-current protection
Head voltage abnormality detection
14.
Hardware timer
6.
7.
NO
TF
OR
DE
N
SI
E
GN W
■ DIMENSIONS
1. Printer mechanism
Center of Paper
Platen Open
Platen Open
Platen Close
when open
when close)
Paper Insertions
Center of Paper
Platen Close
Paper Insertion
15.5
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
4
FTP-628MCL Series
2. Interface board
5.1
130.8
83.8
55.9
6.4
4 - ø 3.6±0.1
CN1
CN2
30.5
CN3
CN7
39.4
NO
39.4
88.9
78.7
CN6*
CN8**
91.4
120.7
5.1
5.0 17.0
Part mounting side
1.6
TF
OR
DE
N
SI
E
GN W
5.1
Part solder side
* CN6 not used
** CN8 used for paper near end detection
Unit: mm
5
FTP-628MCL Series
■ PRINTER CONNECTOR (FLEXIBLE PT BOARD) PIN ARRAYS
Control circuit side connector: 52030-3010 Molex or equivalent product (Reference CN3)
No.
Signal
I/O
Contents
No.
Signal
I/O
Contents
1
PHK
—
Photo interrupter (cathode)
2
VSEN
I
Power supply for paper sensor
3
PHE
O
Photo interrupter (emitter)
4
VH
I
Head driving power supply
5
VH
I
Head driving power supply
6
GNC
—
7
GND
—
Ground for head
8
DIN
I
Data input
9
LAT
I
Data latch
10
CLK
I
Clock
STB6
I
Enable 6
12
STB5
I
Enable 5
STB4
I
Enable 4
14
VDD
I
Logic Power supply
11
13
15
17
NO
STB3
STB1
19
TH
21
GND
23
VH
25
SW1
27
MT/B
29
MT/A
Ground for head
TF
OR
DE
N
SI
E
GN W
I
Enable 3
16
STB 2
I
Enable 2
I
Enable 1
18
TH
O
Thermistor
O
Thermistor
20
GND
—
Ground for head
—
Ground for head
22
VH
I
Head driving power supply
24
N.C.
—
Open terminal
I
Head open switch*
26
SW2
O
Head open switch*
I
Stepping motor coil
excitation signal B
28
MT/B
I
Stepping motor coil
excitation signal B
I
Stepping motor coil
excitation signal A
30
MT/A
I
Stepping motor coil
excitation signal A
I
Head driving power supply
* on MCL003 and MCL004 models
6
FTP-628MCL Series
■ INTERFACE
1. Centronics interface
(1) Connector (CN2)
Connector part number
: FCN-605Q030-G/M (Fujitsu Components) or equivalent
Mating connector part number : FCN-607B030-G/B (Fujitsu Components) or equivalent
(2) Connector pin assignment
No.
Signal
I/O
Contents
No.
Signal
I/O
Contents
1
PRSTB
I
Data strobe
2
PRSTB-RET
—
Connected to logic GND
3
PRDT0
I
Data 0
4
PRDT0-RET
—
Connected to logic GND
PRDT1
I
Data 1
6
PRDT1-RET
—
Connected to logic GND
PRDT2
I
Data 2
8
PRDT2-RET
—
Connected to logic GND
5
7
9
11
NO
PRDT3
PRDT4
TF
OR
DE
N
SI
E
GN W
I
Data 3
10
PRDT3-RET
—
Connected to logic GND
I
Data 4
12
PRDT4-RET
—
Connected to logic GND
I
Data 5
14
PRDT5-RET
—
Connected to logic GND
I
Data 6
16
PRDT6-RET
—
Connected to logic GND
I
Data 7
18
PRDT7-RET
—
Connected to logic GND
13
PRDT5
15
PRDT6
17
PRDT7
19
ACKNLG
O
Data input acknowledge
20
ACKNLG-RET
—
Connected to logic GND
21
BUSY
O
Busy
22
BUSY-RET
—
Connected to logic GND
23
RINF2
O
Printer status 2
24
INPRM-RET
—
Connected to logic GND
25
SLCTIN
I
Printer select
26
INPRM
I
Reset
27
RINF1
O
Printer status 1
28
RINF3
O
Printer status 3
29
ATF
I
Paper feed request
30
GND
—
Logic GND
Notes:
• Symbol “——” means a negative logic signal.
• “–RET” signal is a return signal of the twisted pair cable.
• “I” or “O” means a signal direction from the interface board side.
(3) Connector pin number
(4) Data input signal timing
FCN-605Q030-G/M (Fujitsu Components)
PRDT0~7
t1
t3
PRSTB
t2
No.1
BUSY
t4
ACKNLG
t5
No.30
No.2
Data set time
PRSTB pulse width
Data hold time
PRSTB to BUSY= “H”
ACKNLG pulse time
:t1≥0.5 µsec
:t2≥0.5 µsec
:t3≥0.5 µsec
:t4≤0.5 µsec
:t5≈ 5.0 µsec
7
FTP-628MCL Series
(5) Printer status signals
Error status
RINF1
RINF2
RINF3
1.
Paper out
Low
High
Low
2.
Paper near end
High
High
Low
3.
Head up
High
Low
Low
4.
Head temperature abnormality
High
Low
High
5.
Head voltage abnormality
Low
High
High
6.
Hardware abnormality
High
High
High
7.
Mark detection abnormality
Low
Low
Low
8.
Normal
Low
Low
High
NO
2. RS-232C
TF
OR
DE
N
SI
E
GN W
(1) Connector (CN7)
Connector part number
: B10B-PH-K-S (J.S.T.) or equivalent
Mating connector part number : PHR-10 (J.S.T.) or equivalent
(2) Connector pin assignment
No.
Signal
1
FG
3
TD
5
GND
7
SLCTIN
9
ATF
I/O
Contents No.
No.
Signal
I/O
Contents No.
-
Frame ground
2
RD
I
Receive data
O
Transmission data
4
DT R
O
Data terminal ready
-
Signal ground
6
DSR
I
Data set ready
I
Printer select
8
INPRM
I
Reset
I
Paper feed request
10
PWD
I
Power down cancellation
signal
Notes:
• Symbol “——” means a negative logic signal.
• “I” or “O” means a signal direction from the interface board side.
8
FTP-628MCL Series
■ CONNECTOR PIN ASSIGNMENT
1. Connector for power supply (CN1)
Part number
Mating Connector
No.
Signal
: B6P-VH (J.S.T) or equivalent (board side)
: VHR-6N
I/O
Contents No.
No.
Signal
I/O
Contents No.
1
+V5
-
Power supply for logic
2
GND
-
Ground
3
GND
-
Ground
4
GN D
-
Ground
5
+VH
-
Power supply for head motor
6
+VH
-
Power supply for head motor
NO
2. Connector for printer mechanism connection (CN3)
Part number
No.
TF
OR
DE
N
SI
E
GN W
Signal
1
PHK
3
PHE
5
VH
7
GND
9
LAT
11
STB6
13
STB4
15
STB3
17
STB1
19
TH
21
GND
23
: 52030-3010 (made by Molex) or equivalent (board side)
I/O
Contents
No.
Signal
I/O
Contents
—
Photo interrupter (cathode)
2
VSEN
O
Power supply for paper senor
I
Photo interrupter (emitter)
4
VH
O
Head driving power supply
O
Head driving power supply
6
GNC
—
Ground for head
—
Ground for head
8
DIN
O
Data input
O
Data latch
10
CLK
O
Clock
O
Enable 6
12
STB5
O
Enable 5
O
Enable 4
14
VDD
O
Logic Power supply
O
Enable 3
16
STB 2
O
Enable 2
O
Enable 1
18
TH
I
Thermistor
I
Thermistor
20
GND
—
Ground for head
—
Ground for head
22
VH
O
Head driving power supply
VH
O
Head driving power supply
24
N.C.
—
Open terminal
25
SW1
O
Head open switch*
26
SW2
I
Head open switch*
27
MT/B
O
Stepping motor coil
excitation signal B
28
MT/B
O
Stepping motor coil
excitation signal B
29
MT/A
O
Stepping motor coil
excitation signal A
30
MT/A
O
Stepping motor coil
excitation signal A
* on MCL003 and MCL004 models
9
FTP-628MCL Series
■ OPTIONS
Name
Interface Cable
(between board and
equipment)
Part Number
Length (mm)
For Centronics (CN2) FTP-441Y201
500
For RS232C (CN7)
FTP-628Y301
500
FTP-622Y401
300
Power supply cable (CN1)
Near end paper sensor (CN8) if required
NO
TF
OR
DE
N
SI
E
GN W
10
FTP-628MCL Series
■ COMMANDS
Command
Contents
HT
Moves print position to the next tab.
LF
Line feed.
FF
Feeds forms (new page).
DC 2
Power down.
ECS RS
Sets reverse printing.
ESC US
Resets reverse printing.
NO
ESC ! + n
Sets print mode.
ESC %+n
Download character set specification//cancellation.
ESC &+y+c1+c2+x+d1~dN
Download character definition.
TF
OR
DE
N
SI
E
GN W
ESC *+m+n1+n2+d1~dN
Sets bit image mode.
ESC ?+n
External registration character deletion.
ESC 2
ESC 3+n
ESC @
ESC A+n
ESC C+n
Sets 1/6 inch line feed length.
Sets the line feed length.
Printer initialization.
Sets the space between the line.
Sets the page length by character line.
ESC D+d1~dN+NUL
Sets the tab position.
ESC J+n
Feeds paper in forward direction and prints.
ESC K+n
ESC R+n
ESC c+1+n
Reverse paper feed.
Selects international character.
Sets internal processing (including auto paper loading).
ESC d+n
Printing and n-line feeding.
ESC e+n
Prints and reverse feeds n-lines.
ECS s+n
Sets printing speed.
ECS t+n
Character code table selection.
ESC {+n
Sets/resets upside down printing.
FS !+n
Kanji printing mode collective specification.
FS &
Kanji printing mode specification.
FS .
Kanji printing mode cancellation.
FS 9+n
Sets the detection functions.
11
FTP-628MCL Series
Commands continued
Command
Contents
FS C+n
Kanji code system selection.
FS W+n
Kanji double height and width mode specification/cancellation.
GS <
Line feeds to the next mark.
GS A+m+n
Sets the line feed length after mark detection.
GS E+n
Sets print quality.
GS V+n+m
Paper cutting (for pending cutter models only).
NO
GS e+n+m
Sets bar code width.
GS h+n
Sets bar code height.
GS k+m+n+d1~dN
GS w+n
Selects bar code type and prints.
TF
OR
DE
N
SI
E
GN W
Sets bar code width magnification.
FS *+m+n1+n2+d1~dN
High speed collective image printing specified.
GS &+m+x+y1+y2+d1~dN
Registration of image data.
GS '+m+n
Prints registered image data.
FS E+n
ESC V+n
GS a+n
FS r+n
ESC EM+n
ECS X+n+m
ESC DEL+n
Fujitsu Components
International
Headquarter
Offices
Correction of impressed energy.
Right Rotation 90° specification / cancellation.
Sets and cancels status transmission. (Serial Mode)
Parameter transmission. (Serial Mode)
Setting the amount of the feeding at automatic paper load.
Setting the turning time of the motor excitation.
Deletes recorded contents in flash memory.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
© 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 04/03/2003
12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 12 Create Date : 2005:04:20 13:44:17 Producer : Acrobat Distiller 3.0 for Power Macintosh Subject : p128-139 Creator : Adobe PageMaker 6.5 Title : p128-139 Author :EXIF Metadata provided by EXIF.tools