Fujitsu M10 4 Users Manual 4/Fujitsu 4S/SPARC 4/SPARC 4S Service

2015-01-29

• Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
  • Contents
  • Preface
    • Audience
    • Related Documentation
    • Text Conventions
      • Command syntax in the text
    • Notes on Safety
    • Syntax of the Command-Line Interface (CLI)
    • Document Feedback
  • Chapter 1 Before Starting Maintenance Work
    • 1.1 Warning/Caution Indications
    • 1.2 Warning Labels
    • 1.3 Labels/Tags
    • 1.4 Safety Precautions
    • 1.5 Notes Regarding Static Electricity
    • 1.6 Other Precautions
    • 1.7 Emergency Power Off
  • Chapter 2 Understanding the System Components
    • 2.1 Identifying the Names and Locations of Components
    • 2.2 Confirming the Functions of the Operation Panel
      • 2.2.1 Display function of the operation panel
      • 2.2.2 Control function of the operation panel
    • 2.3 Checking the LED Indications
      • 2.3.1 Operation panel LEDs
      • 2.3.2 LEDs on the rear panel (System locator)
      • 2.3.3 LEDs on each component
    • 2.4 Confirming the Types of Cable
      • 2.4.1 Types of cable
      • 2.4.2 Cable connection ports
  • Chapter 3 Troubleshooting
    • 3.1 Suspected Failure Conditions
    • 3.2 Determining the Causes of Individual Failures
    • 3.3 Identifying a Failure
      • 3.3.1 Checking the LED indications
      • 3.3.2 Checking error messages
      • 3.3.3 Checking the status of a component
      • 3.3.4 Checking the status of a PCI expansion unit
      • 3.3.5 Checking log information
      • 3.3.6 Checking the messages output by the predictive self-repairing tool
      • 3.3.7 Identifying the location of the chassis requiring maintenance
    • 3.4 Downloading Error Log Information
  • Chapter 4 Preparing for Maintenance
    • 4.1 Preparing Tools Required for Maintenance
    • 4.2 Confirming the System Configuration
      • 4.2.1 Confirming the hardware configuration
      • 4.2.2 Confirming the software and firmware configurations
    • 4.3 Understanding Types of Maintenance
  • Chapter 5 Understanding the Preparations for Enabling Maintenance
    • 5.1 Releasing an FRU from the System with the replacefru Command
    • 5.2 Releasing a Chassis from the Physical Partition
    • 5.3 Powering Off the Physical Partition Requiring Maintenance
    • 5.4 Stopping the Entire System
      • 5.4.1 Stopping the system with the XSCF command
      • 5.4.2 Stopping the system from the operation panel
    • 5.5 Accessing Components
      • 5.5.1 Lowering the cable support
      • 5.5.2 Removing the power cord
      • 5.5.3 Removing the front cover
  • Chapter 6 Understanding the Preparations for Restoring the System
    • 6.1 Incorporating an FRU into the System with the replacefru Command
    • 6.2 Incorporating a Chassis into a Physical Partition
    • 6.3 Powering On the Physical Partition Requiring Maintenance
    • 6.4 Starting the Entire System
      • 6.4.1 Starting the system with an XSCF command
      • 6.4.2 Starting the system from the operation panel
    • 6.5 Restoring the Chassis
      • 6.5.1 Installing the power cord
      • 6.5.2 Fixing the cable support
      • 6.5.3 Installing the front cover
  • Chapter 7 Maintaining the CPU Memory Units
    • 7.1 Configuration of the CPU Memory Units
    • 7.2 Before Maintaining a CPU Memory Unit
      • 7.2.1 Types of maintenance
      • 7.2.2 Maintenance flow
      • 7.2.3 Precautions for replacement
      • 7.2.4 Precautions for installation
      • 7.2.5 Precautions for removal
    • 7.3 Enabling the Removal of a CPU Memory Unit
      • 7.3.1 Active/Cold maintenance
      • 7.3.2 Inactive/Cold maintenance
      • 7.3.3 System-stopped maintenance
    • 7.4 Removing a CPU Memory Unit
      • 7.4.1 Accessing a CPU memory unit
      • 7.4.2 Removing the CPU memory unit lower
      • 7.4.3 Removing the CPU memory unit upper
      • 7.4.4 Removing a PCI Express cable
    • 7.5 Installing a CPU Memory Unit
      • 7.5.1 Installing a PCI Express cable
      • 7.5.2 Installing the CPU memory unit upper
      • 7.5.3 Installing the CPU memory unit lower
      • 7.5.4 Restoring the chassis
    • 7.6 Restoring the System
      • 7.6.1 Active/Cold maintenance
      • 7.6.2 Inactive/Cold maintenance
      • 7.6.3 System-stopped maintenance
  • Chapter 8 Maintaining the Memory
    • 8.1 Memory Configuration
    • 8.2 Memory Configuration Rules
      • 8.2.1 Memory mounting rules
      • 8.2.2 Checking memory information
    • 8.3 Before Maintaining Memory
      • 8.3.1 Types of maintenance
      • 8.3.2 Maintenance flow
      • 8.3.3 Precautions for replacement
      • 8.3.4 Precautions for installation
      • 8.3.5 Precautions for removal
    • 8.4 Enabling the Removal of Memory
      • 8.4.1 Active/Cold maintenance
      • 8.4.2 Inactive/Cold maintenance
      • 8.4.3 System-stopped maintenance
    • 8.5 Removing Memory
      • 8.5.1 Accessing memory
      • 8.5.2 Removing memory
    • 8.6 Installing Memory
      • 8.6.1 Installing memory
      • 8.6.2 Restoring the chassis
    • 8.7 Restoring the System
      • 8.7.1 Active/Cold maintenance
      • 8.7.2 Inactive/Cold maintenance
      • 8.7.3 System-stopped maintenance
  • Chapter 9 Maintaining the Crossbar Units
    • 9.1 Configuration of the Crossbar Units
    • 9.2 Before Maintaining a Crossbar Unit
      • 9.2.1 Types of maintenance
      • 9.2.2 Maintenance flow
    • 9.3 Enabling the Removal of a Crossbar Unit
      • 9.3.1 Active/Cold maintenance
      • 9.3.2 Inactive/Cold maintenance
      • 9.3.3 System-stopped maintenance
    • 9.4 Removing a Crossbar Unit
      • 9.4.1 Accessing a crossbar unit
      • 9.4.2 Removing a crossbar unit
    • 9.5 Installing a Crossbar Unit
      • 9.5.1 Installing a crossbar unit
      • 9.5.2 Restoring the chassis
    • 9.6 Restoring the System
      • 9.6.1 Active/Cold maintenance
      • 9.6.2 Inactive/Cold maintenance
      • 9.6.3 System-stopped maintenance
  • Chapter 10 Maintaining the Power Supply Units
    • 10.1 Configuration of the Power Supply Units
    • 10.2 Before Maintaining a Power Supply Unit
      • 10.2.1 Types of maintenance
      • 10.2.2 Maintenance flow
      • 10.2.3 Precautions for replacement
    • 10.3 Enabling the Removal of a Power Supply Unit
      • 10.3.1 Active/Hot maintenance
      • 10.3.2 Active/Cold maintenance
      • 10.3.3 Inactive/Hot maintenance
      • 10.3.4 Inactive/Cold maintenance
      • 10.3.5 System-stopped maintenance
    • 10.4 Removing a Power Supply Unit
      • 10.4.1 Accessing a power supply unit
      • 10.4.2 Removing a power supply unit
    • 10.5 Installing a Power Supply Unit
      • 10.5.1 Installing a power supply unit
      • 10.5.2 Restoring the chassis
    • 10.6 Restoring the System
      • 10.6.1 Active/Hot maintenance
      • 10.6.2 Active/Cold maintenance
      • 10.6.3 Inactive/Hot maintenance
      • 10.6.4 Inactive/Cold maintenance
      • 10.6.5 System-stopped maintenance
  • Chapter 11 Maintaining the Fan Units
    • 11.1 Configuration of the Fan Units
    • 11.2 Before Maintaining a Fan Unit
      • 11.2.1 Types of maintenance
      • 11.2.2 Maintenance flow
      • 11.2.3 Precautions for replacement
    • 11.3 Enabling the Removal of a Fan Unit
      • 11.3.1 Active/Hot maintenance
      • 11.3.2 Active/Cold maintenance
      • 11.3.3 Inactive/Hot maintenance
      • 11.3.4 Inactive/Cold maintenance
      • 11.3.5 System-stopped maintenance
    • 11.4 Removing a Fan Unit
      • 11.4.1 Accessing a fan unit
      • 11.4.2 Removing a fan unit
    • 11.5 Installing a Fan Unit
      • 11.5.1 Installing a fan unit
      • 11.5.2 Restoring the chassis
    • 11.6 Restoring the System
      • 11.6.1 Active/Hot maintenance
      • 11.6.2 Active/Cold maintenance
      • 11.6.3 Inactive/Hot maintenance
      • 11.6.4 Inactive/Cold maintenance
      • 11.6.5 System-stopped maintenance
  • Chapter 12 Maintaining the Internal Disks
    • 12.1 Configuration of the Internal Disks
      • 12.1.1 Identification of disk slot
    • 12.2 Before Maintaining an Internal Disk
      • 12.2.1 Types of maintenance
      • 12.2.2 Maintenance flow
      • 12.2.3 Precautions for installation
      • 12.2.4 Precautions for removal
    • 12.3 Enabling the Removal of an Internal Disk
      • 12.3.1 Active/Hot maintenance
      • 12.3.2 Active/Cold maintenance
      • 12.3.3 Inactive/Hot maintenance
      • 12.3.4 Inactive/Cold maintenance
      • 12.3.5 System-stopped maintenance
    • 12.4 Removing an Internal Disk
      • 12.4.1 Accessing an internal disk
      • 12.4.2 Removing an internal disk
    • 12.5 Installing an Internal Disk
      • 12.5.1 Installing an internal disk
      • 12.5.2 Restoring the chassis
    • 12.6 Restoring the System
      • 12.6.1 Active/Hot maintenance
      • 12.6.2 Active/Cold maintenance
      • 12.6.3 Inactive/Hot maintenance
      • 12.6.4 Inactive/Cold maintenance
      • 12.6.5 System-stopped maintenance
  • Chapter 13 Maintaining the PCI Express Cards
    • 13.1 Configuration of the PCI Express Cards
    • 13.2 Before Maintaining a PCI Express Card
      • 13.2.1 Types of maintenance
      • 13.2.2 Maintenance flow
      • 13.2.3 Precautions for replacement
      • 13.2.4 Precautions for installation
      • 13.2.5 Precautions for removal
    • 13.3 Checking If PCI Hot Plug (PHP) Can Be Used
    • 13.4 Enabling the Removal of a PCI Express Card
      • 13.4.1 Active/Hot maintenance (with PHP)
      • 13.4.2 Active/Hot maintenance (with DR)
      • 13.4.3 Inactive/Hot maintenance
      • 13.4.4 System-stopped maintenance
    • 13.5 Removing a PCI Express Card
      • 13.5.1 Accessing a PCI Express card cassette
      • 13.5.2 Removing a PCI Express card cassette
      • 13.5.3 Removing a PCI Express card
    • 13.6 Installing a PCI Express Card
      • 13.6.1 Installing a PCI Express card
      • 13.6.2 Installing a PCI Express card cassette
      • 13.6.3 Restoring the chassis
    • 13.7 Restoring the System
      • 13.7.1 Active/Hot maintenance (with PHP)
      • 13.7.2 Active/Hot maintenance (with DR)
      • 13.7.3 Inactive/Hot maintenance
      • 13.7.4 System-stopped maintenance
  • Chapter 14 Maintaining the PSU Backplane Unit
    • 14.1 Location of the PSU Backplane Unit
    • 14.2 Before Maintaining the PSU Backplane Unit
      • 14.2.1 Types of maintenance
      • 14.2.2 Maintenance flow
    • 14.3 Enabling the Removal of the PSU Backplane Unit
      • 14.3.1 Active/Cold maintenance
      • 14.3.2 Inactive/Cold maintenance
      • 14.3.3 System-stopped maintenance
    • 14.4 Removing the PSU Backplane Unit
      • 14.4.1 Accessing the PSU backplane unit
      • 14.4.2 Removing the PSU backplane unit
    • 14.5 Installing the PSU Backplane Unit
      • 14.5.1 Installing the PSU backplane unit
      • 14.5.2 Restoring the chassis
    • 14.6 Restoring the System
      • 14.6.1 Active/Cold maintenance
      • 14.6.2 Inactive/Cold maintenance
      • 14.6.3 System-stopped maintenance
  • Chapter 15 Maintaining the Operation Panel
    • 15.1 Location of the Operation Panel
    • 15.2 Before Maintaining the Operation Panel
      • 15.2.1 Types of maintenance
      • 15.2.2 Maintenance flow
      • 15.2.3 Precautions for replacement
    • 15.3 Enabling the Removal of the Operation Panel
      • 15.3.1 Active/Cold maintenance
      • 15.3.2 Inactive/Cold maintenance
      • 15.3.3 System-stopped maintenance
    • 15.4 Removing the Operation Panel
      • 15.4.1 Accessing the operation panel
      • 15.4.2 Removing the operation panel
    • 15.5 Installing the Operation Panel
      • 15.5.1 Installing the operation panel
      • 15.5.2 Restoring the chassis
    • 15.6 Restoring the System
      • 15.6.1 Active/Cold maintenance
      • 15.6.2 Inactive/Cold maintenance
      • 15.6.3 System-stopped maintenance
  • Chapter 16 Maintaining the Crossbar Units of the Crossbar Box
    • 16.1 Configuration of the Crossbar Units
    • 16.2 Before Maintaining a Crossbar Unit
      • 16.2.1 Types of maintenance
      • 16.2.2 Maintenance flow
    • 16.3 Enabling the Removal of a Crossbar Unit
      • 16.3.1 Active/Cold maintenance
      • 16.3.2 Inactive/Cold maintenance
      • 16.3.3 System-stopped maintenance
    • 16.4 Removing a Crossbar Unit
    • 16.5 Installing a Crossbar Unit
    • 16.6 Restoring the System
      • 16.6.1 Active/Cold maintenance
      • 16.6.2 Inactive/Cold maintenance
      • 16.6.3 System-stopped maintenance
  • Chapter 17 Maintaining the XSCF Unit of the Crossbar Box
    • 17.1 Location of the XSCF Unit
    • 17.2 Before Maintaining the XSCF Unit
      • 17.2.1 Types of maintenance
      • 17.2.2 Maintenance flow
    • 17.3 Enabling the Removal of the XSCF Unit
      • 17.3.1 Active/Hot maintenance
      • 17.3.2 Inactive/Hot maintenance
      • 17.3.3 System-stopped maintenance
    • 17.4 Removing the XSCF Unit
    • 17.5 Installing the XSCF Unit
    • 17.6 Restoring the System
      • 17.6.1 Active/Hot maintenance
      • 17.6.2 Inactive/Hot maintenance
      • 17.6.3 System-stopped maintenance
  • Chapter 18 Maintaining the Power Supply Units of the Crossbar Box
    • 18.1 Configuration of the Power Supply Units
    • 18.2 Before Maintaining a Power Supply Unit
      • 18.2.1 Types of maintenance
      • 18.2.2 Maintenance flow
      • 18.2.3 Precautions for replacement
    • 18.3 Enabling the Removal of a Power Supply Unit
      • 18.3.1 Active/Hot maintenance
      • 18.3.2 Inactive/Hot maintenance
      • 18.3.3 System-stopped maintenance
    • 18.4 Removing a Power Supply Unit
    • 18.5 Installing a Power Supply Unit
    • 18.6 Restoring the System
      • 18.6.1 Active/Hot maintenance
      • 18.6.2 Inactive/Hot maintenance
      • 18.6.3 System-stopped maintenance
  • Chapter 19 Maintaining the Fan Units of the Crossbar Box
    • 19.1 Configuration of the Fan Units
    • 19.2 Before Maintaining a Fan Unit
      • 19.2.1 Types of maintenance
      • 19.2.2 Maintenance flow
      • 19.2.3 Precautions for replacement
    • 19.3 Enabling the Removal of a Fan Unit
      • 19.3.1 Active/Hot maintenance
      • 19.3.2 Inactive/Hot maintenance
      • 19.3.3 System-stopped maintenance
    • 19.4 Removing a Fan Unit
      • 19.4.1 Accessing a fan unit
      • 19.4.2 Removing a fan unit
    • 19.5 Installing a Fan Unit
      • 19.5.1 Installing a fan unit
      • 19.5.2 Restoring the chassis
    • 19.6 Restoring the System
      • 19.6.1 Active/Hot maintenance
      • 19.6.2 Inactive/Hot maintenance
      • 19.6.3 System-stopped maintenance
  • Chapter 20 Maintaining the XSCF Interface Unit of the Crossbar Box
    • 20.1 Location of the XSCF Interface Unit
    • 20.2 Before Maintaining the XSCF Interface Unit
      • 20.2.1 Types of maintenance
      • 20.2.2 Maintenance flow
    • 20.3 Enabling the Removal of the XSCF Interface Unit
    • 20.4 Removing the XSCF Interface Unit
    • 20.5 Installing the XSCF Interface Unit
    • 20.6 Restoring the System
  • Chapter 21 Maintaining the Crossbar Backplane Unit of the Crossbar Box
    • 21.1 Location of the Crossbar Backplane Unit
    • 21.2 Before Maintaining the Crossbar Backplane Unit
      • 21.2.1 Types of maintenance
      • 21.2.2 Maintenance flow
    • 21.3 Enabling the Removal of the Crossbar Backplane Unit
    • 21.4 Removing the Crossbar Backplane Unit
    • 21.5 Installing the Crossbar Backplane Unit
    • 21.6 Restoring the System
  • Chapter 22 Maintaining the Fan Backplane of the Crossbar Box
    • 22.1 Configuration of the Fan Backplane
    • 22.2 Before Maintaining the Fan Backplane
      • 22.2.1 Types of maintenance
      • 22.2.2 Maintenance flow
    • 22.3 Enabling the Removal of the Fan Backplane
    • 22.4 Removing the Fan Backplane
      • 22.4.1 Accessing the fan backplane
      • 22.4.2 Removing the fan backplane
    • 22.5 Installing the Fan Backplane
      • 22.5.1 Installing the fan backplane
      • 22.5.2 Restoring the chassis
    • 22.6 Restoring the System
  • Chapter 23 Maintaining the Operation Panel of the Crossbar Box
    • 23.1 Location of the Operation Panel
    • 23.2 Before Maintaining the Operation Panel
      • 23.2.1 Types of maintenance
      • 23.2.2 Maintenance flow
      • 23.2.3 Precautions for replacement
    • 23.3 Enabling the Removal of the Operation Panel
    • 23.4 Removing the Operation Panel
      • 23.4.1 Accessing the operation panel
      • 23.4.2 Removing the operation panel
    • 23.5 Installing the Operation Panel
      • 23.5.1 Installing the operation panel
      • 23.5.2 Restoring the chassis
    • 23.6 Restoring the System
  • Chapter 24 Maintaining the Crossbar Cables (Electrical)
    • 24.1 Configuration of the Ports for the Crossbar Cables (Electrical)
    • 24.2 Before Maintaining a Crossbar Cable (Electrical)
      • 24.2.1 Types of maintenance
      • 24.2.2 Maintenance flow
      • 24.2.3 Precautions for replacement
    • 24.3 Enabling the Removal of a Crossbar Cable (Electrical)
      • 24.3.1 Inactive/Cold maintenance
      • 24.3.2 System-stopped maintenance
    • 24.4 Removing a Crossbar Cable (Electrical)
    • 24.5 Installing a Crossbar Cable (Electrical)
    • 24.6 Restoring the System
      • 24.6.1 Inactive/Cold maintenance
      • 24.6.2 System-stopped maintenance
  • Chapter 25 Maintaining the Crossbar Cables (Optical)
    • 25.1 Configuration of the Ports for the Crossbar Cables (Optical)
    • 25.2 Before Maintaining a Crossbar Cable (Optical)
      • 25.2.1 Types of maintenance
      • 25.2.2 Maintenance flow
      • 25.2.3 Precautions for replacement
    • 25.3 Enabling the Removal of a Crossbar Cable (Optical)
      • 25.3.1 Inactive/Cold maintenance
      • 25.3.2 System-stopped maintenance
    • 25.4 Removing a Crossbar Cable (Optical)
    • 25.5 Installing a Crossbar Cable (Optical)
    • 25.6 Restoring the System
      • 25.6.1 Inactive/Cold maintenance
      • 25.6.2 System-stopped maintenance
  • Chapter 26 Maintaining the XSCF BB Control Cables
    • 26.1 Configuration of the Ports for the XSCF BB Control Cables
    • 26.2 Before Maintaining an XSCF BB Control Cable
      • 26.2.1 Types of maintenance
      • 26.2.2 Maintenance flow
    • 26.3 Enabling the Removal of an XSCF BB Control Cable
      • 26.3.1 Active/Hot maintenance
      • 26.3.2 Active/Cold maintenance
      • 26.3.3 Inactive/Hot maintenance
      • 26.3.4 Inactive/Cold maintenance
      • 26.3.5 System-stopped maintenance
    • 26.4 Removing an XSCF BB Control Cable
    • 26.5 Installing an XSCF BB Control Cable
    • 26.6 Restoring the System
      • 26.6.1 Active/Hot maintenance
      • 26.6.2 Active/Cold maintenance
      • 26.6.3 Inactive/Hot maintenance
      • 26.6.4 Inactive/Cold maintenance
      • 26.6.5 System-stopped maintenance
  • Chapter 27 Maintaining the XSCF DUAL Control Cables
    • 27.1 Configuration of the XSCF DUAL Control Ports
    • 27.2 Before Maintaining an XSCF DUAL Control Cable
      • 27.2.1 Types of maintenance
      • 27.2.2 Maintenance flow
    • 27.3 Enabling the Removal of an XSCF DUAL Control Cable
      • 27.3.1 Active/Hot maintenance
      • 27.3.2 Active/Cold maintenance
      • 27.3.3 Inactive/Hot maintenance
      • 27.3.4 Inactive/Cold maintenance
      • 27.3.5 System-stopped maintenance
    • 27.4 Removing an XSCF DUAL Control Cable
    • 27.5 Installing an XSCF DUAL Control Cable
    • 27.6 Restoring the System
      • 27.6.1 Active/Hot maintenance
      • 27.6.2 Active/Cold maintenance
      • 27.6.3 Inactive/Hot maintenance
      • 27.6.4 Inactive/Cold maintenance
      • 27.6.5 System-stopped maintenance
  • Chapter 28 Maintaining the Cable Kit of the Crossbar Box
    • 28.1 Configuration of the Cable Kit
      • 28.1.1 Cables for the connection between the crossbar backplane unit and terminal board
      • 28.1.2 Cables for the connection between the terminal board and fan backplane
      • 28.1.3 Locations for the cable kit
    • 28.2 Before Maintaining the Cable Kit
      • 28.2.1 Types of maintenance
      • 28.2.2 Maintenance flow
    • 28.3 Enabling the Removal of the Cable Kit
    • 28.4 Removing the Cable Kit
      • 28.4.1 Removing the cables for the connection between the crossbar backplane unit and terminal board
      • 28.4.2 Removing the cables for the connection between the terminal board and fan backplane
    • 28.5 Installing the Cable Kit
      • 28.5.1 Installing a cable between the crossbar backplane unit and terminal board
      • 28.5.2 Installing a cable for the connection between the terminal board and fan backplane
    • 28.6 Restoring the System
  • Chapter 29 Maintaining the Dedicated Power Distribution Unit Mounted on the Rack for Expanded Connection
    • 29.1 Configuration of the Dedicated Power Distribution Unit
    • 29.2 Before Maintaining the Dedicated Power Distribution Unit
      • 29.2.1 Types of maintenance
      • 29.2.2 Maintenance flow
      • 29.2.3 Precautions for replacement
    • 29.3 Enabling the Removal of the Dedicated Power Distribution Unit
      • 29.3.1 Active/Cold maintenance
      • 29.3.2 System-stopped maintenance
    • 29.4 Removing the Dedicated Power Distribution Unit
    • 29.5 Installing the Dedicated Power Distribution Unit
    • 29.6 Restoring the System
      • 29.6.1 Active/Cold maintenance
      • 29.6.2 System-stopped maintenance
  • Appendix A Component List
  • Appendix B Component Specifications
    • B.1 CPU Memory Unit
    • B.2 Crossbar Unit
    • B.3 XSCF Unit
    • B.4 Power Supply Unit
    • B.5 Fan Unit
    • B.6 Internal Disk Drive
    • B.7 PCI Express Card
    • B.8 XSCF Interface Unit
    • B.9 Backplanes
    • B.10 Operation Panel
  • Appendix C Oracle Solaris Troubleshooting Commands
    • C.1 iostat(1M) Command
    • C.2 prtdiag(1M) Command
    • C.3 prtconf(1M) Command
    • C.4 netstat(1M) Command
    • C.5 ping(1M) Command
    • C.6 ps(1) Command
    • C.7 prstat(1M) Command
  • Appendix D External Interface Specifications
    • D.1 Serial Port
      • D.1.1 Wire connection chart for serial cable
    • D.2 USB Port
    • D.3 SAS Port
    • D.4 RESET Switch
  • Index