Fujitsu Xg Series P3Nk 4452 01Enzd Users Manual User’s Guide

2015-01-25

• Preface
• Contents
• Organization and Usage of This Manual
  • Target Readers and Required Knowledge
  • Areas Covered
  • Trademark Notification in This Manual
  • How the Manuals for This Device Are Organized
• End User's License Agreement
• Chapter 1 Features and Functions
  • 1.1 Hardware Specifications
    • 1.1.1 Switch Specifications
    • 1.1.2 Option
    • 1.1.3 10/100/1000BASE-T Port Specifications
    • 1.1.4 USB Port Specifications
    • 1.1.5 Console Port Specifications
  • 1.2 Software Specifications
    • 1.2.1 Software Specifications
    • 1.2.2 Initial Values
    • 1.2.3 System Maximum Values
• Chapter 2 Using the CLI
  • 2.1 Overview of the CLI
    • 2.1.1 Operating Environment for the CLI
    • 2.1.2 Command Modes and Mode Switching
      • 2.1.2.1 Command Operation Procedure
      • 2.1.2.2 Executable commands
  • 2.2 Using the CLI
    • 2.2.1 Using the Shell Function
      • 2.2.1.1 Command execution function
      • 2.2.1.2 Entry editing function
      • 2.2.1.3 Command name autocomplete function
      • 2.2.1.4 Command argument autocomplete function
      • 2.2.1.5 Abbreviated command entry function
      • 2.2.1.6 Command alias function
      • 2.2.1.7 Configuration hierarchy function
      • 2.2.1.8 Time of command execution display function
      • 2.2.1.9 Command history function
      • 2.2.1.10 List of shell key bindings
    • 2.2.2 Error Messages Common to All Commands
    • 2.2.3 Characters that can be entered
• Chapter 3 Installation
  • 3.1 Workflow for Initial Setup of the Device
    • 3.1.1 Configure LAN Interface
    • 3.1.2 Telnet Connection via the LAN Interface (Optional)
    • 3.1.3 SNMP Configuration (Optional)
• Chapter 4 Switch Functions and their Configuration
  • 4.1 Basic Switch Functions
    • 4.1.1 Switching Mode (XG2600)
    • 4.1.2 MAC Address Table Management
    • 4.1.3 Jumbo Frame Support
    • 4.1.4 Flow Control
    • 4.1.5 Storm Control
    • 4.1.6 Egress Rate Control (XG2600 Only)
  • 4.2 Port Mirroring
  • 4.3 Link Down Relay
  • 4.4 Link Aggregation
    • 4.4.1 Configuring Link Aggregation
    • 4.4.2 Frame Distribution Methods in Link Aggregation
    • 4.4.3 The Number of Ports That Require Linkup
    • 4.4.4 Notes on Link Aggregation
  • 4.5 Spanning Tree Protocol (STP)
    • 4.5.1 Port Roles Based on Spanning Tree
    • 4.5.2 Spanning Tree Protocol Port States
    • 4.5.3 Configuring Spanning Tree
  • 4.6 VLAN
    • 4.6.1 Port-Based VLAN
    • 4.6.2 Tag-Based (IEEE802.1Q) VLAN
  • 4.7 Quality of Service (QoS)
  • 4.8 IGMP Snooping
    • 4.8.1 Registering Group Members
    • 4.8.2 Removing Group Members
    • 4.8.3 Managing Group Members
    • 4.8.4 IGMP Querier
    • 4.8.5 Configuring IGMP Snooping
  • 4.9 Network Management
    • 4.9.1 Traffic Statistics
    • 4.9.2 SNMP Agent
    • 4.9.3 RMON
• Chapter 5 Command Reference
  • 5.1 Port Information Settings
    • 5.1.1 Ethernet Common Information
      • 5.1.1.1 forwardingmode
      • 5.1.1.2 ether use
      • 5.1.1.3 ether media
      • 5.1.1.4 ether mode
      • 5.1.1.5 ether duplex
      • 5.1.1.6 ether mdi
      • 5.1.1.7 ether flowctl
      • 5.1.1.8 ether type
      • 5.1.1.9 ether vlan tag
      • 5.1.1.10 ether vlan untag
      • 5.1.1.11 ether egress permission
      • 5.1.1.12 ether loopdetect use
      • 5.1.1.13 ether loopdetect frame
      • 5.1.1.14 ether startup
      • 5.1.1.15 ether recovery limit
      • 5.1.1.16 ether downrelay port
      • 5.1.1.17 ether downrelay recovery mode
      • 5.1.1.18 ether downrelay recovery cause
      • 5.1.1.19 ether description
      • 5.1.1.20 linkaggregation algorithm
      • 5.1.1.21 linkaggregation mode
      • 5.1.1.22 linkaggregation type
      • 5.1.1.23 linkaggregation collecting minimum
      • 5.1.1.24 linkaggregation icmpwatch address
      • 5.1.1.25 linkaggregation icmpwatch interval
      • 5.1.1.26 linkaggregation downrelay port
      • 5.1.1.27 linkaggregation downrelay recovery mode
      • 5.1.1.28 linkaggregation downrelay recovery cause
      • 5.1.1.29 linkaggregation description
      • 5.1.1.30 backup mode
      • 5.1.1.31 backup standby
    • 5.1.2 MAC Information
      • 5.1.2.1 ether mac storm
    • 5.1.3 STP Information
      • 5.1.3.1 ether stp use
      • 5.1.3.2 ether stp domain cost
      • 5.1.3.3 ether stp domain priority
      • 5.1.3.4 ether stp force-version
    • 5.1.4 LLDP Information
      • 5.1.4.1 ether lldp mode
      • 5.1.4.2 ether lldp info
      • 5.1.4.3 ether lldp vlan
      • 5.1.4.4 ether lldp notification
    • 5.1.5 Filter Information
      • 5.1.5.1 ether macfilter
      • 5.1.5.2 ether macfilter move
    • 5.1.6 QoS Information
      • 5.1.6.1 ether qos aclmap
      • 5.1.6.2 ether qos aclmap move
      • 5.1.6.3 ether qos priority
      • 5.1.6.4 ether qos mode
      • 5.1.6.5 ether qos prioritymap
    • 5.1.7 LACP Information
      • 5.1.7.1 ether lacp port-priority
    • 5.1.8 ether L3 Monitor Information
      • 5.1.8.1 ether icmpwatch address
      • 5.1.8.2 ether icmpwatch interval
    • 5.1.9 ether SNMP Information
      • 5.1.9.1 ether snmp trap linkdown
      • 5.1.9.2 ether snmp trap linkup
    • 5.1.10 ether output rate control information
      • 5.1.10.1 ether ratecontrol
  • 5.2 LACP Information Settings
    • 5.2.1 LACP Information
      • 5.2.1.1 lacp system-priority
      • 5.2.1.2 lacp bpdu
  • 5.3 VLAN Information Settings
    • 5.3.1 VLAN Common Information
      • 5.3.1.1 vlan name
      • 5.3.1.2 vlan protocol
      • 5.3.1.3 vlan forward
      • 5.3.1.4 vlan description
    • 5.3.2 IGMP Snooping Information
      • 5.3.2.1 vlan igmpsnoop router
      • 5.3.2.2 vlan igmpsnoop querier
      • 5.3.2.3 vlan igmpsnoop source
      • 5.3.2.4 vlan igmpsnoop proxy
    • 5.3.3 Filter Information
      • 5.3.3.1 vlan macfilter
      • 5.3.3.2 vlan macfilter move
      • 5.3.3.3 vlan ip6filter
      • 5.3.3.4 vlan ip6filter move
    • 5.3.4 QoS Information
      • 5.3.4.1 vlan qos aclmap
      • 5.3.4.2 vlan ip6qos aclmap
      • 5.3.4.3 vlan ip6qos aclmap move
  • 5.4 MAC Information
    • 5.4.1 MAC Information
      • 5.4.1.1 mac learning
      • 5.4.1.2 mac age
  • 5.5 LAN Information Settings
    • 5.5.1 IPv4 Related Information
      • 5.5.1.1 lan description
      • 5.5.1.2 lan ip address
      • 5.5.1.3 lan ip route
      • 5.5.1.4 lan ip filter
      • 5.5.1.5 lan ip filter move
      • 5.5.1.6 lan ip dscp
      • 5.5.1.7 lan ip dscp move
      • 5.5.1.8 lan ip arp static
    • 5.5.2 IPv6 Related Information
      • 5.5.2.1 lan ip6 use
      • 5.5.2.2 lan ip6 ifid
      • 5.5.2.3 lan ip6 address
      • 5.5.2.4 lan ip6 ra mode
      • 5.5.2.5 lan ip6 route
      • 5.5.2.6 lan ip6 filter
      • 5.5.2.7 lan ip6 filter move
      • 5.5.2.8 lan ip6 dscp
      • 5.5.2.9 lan ip6 dscp move
    • 5.5.3 VLAN Related Information
      • 5.5.3.1 lan vlan
    • 5.5.4 LLMNR Related Information
      • 5.5.4.1 lan llmnr use
    • 5.5.5 Management LAN port IPv4 Related Information
      • 5.5.5.1 oob ip address
      • 5.5.5.2 oob ip route
    • 5.5.6 Management LAN port IPv6 Related Information
      • 5.5.6.1 oob ip6 use
      • 5.5.6.2 oob ip6 ifid
      • 5.5.6.3 oob ip6 address
      • 5.5.6.4 oob ip6 ra mode
      • 5.5.6.5 oob ip6 route
    • 5.5.7 Management LAN port LLMNR Related Information
      • 5.5.7.1 oob llmnr use
  • 5.6 IPv4 Related Information
    • 5.6.1 IPv4 Related Information
      • 5.6.1.1 ip arp age
  • 5.7 QoS Information Settings
    • 5.7.1 QoS Information
      • 5.7.1.1 qos cosmap
  • 5.8 STP Information
    • 5.8.1 STP Information
      • 5.8.1.1 stp mode
      • 5.8.1.2 stp age
      • 5.8.1.3 stp delay
      • 5.8.1.4 stp hello
      • 5.8.1.5 stp bpdu
      • 5.8.1.6 stp domain priority
      • 5.8.1.7 stp config_id
      • 5.8.1.8 stp domain vlan
      • 5.8.1.9 stp max-hops
  • 5.9 LLDP Information Settings
    • 5.9.1 LLDP Information
      • 5.9.1.1 lldp send interval
      • 5.9.1.2 lldp send hold
      • 5.9.1.3 lldp reinit delay
      • 5.9.1.4 lldp notification interval
  • 5.10 IGMP Snooping Information Settings
    • 5.10.1 IGMP Snooping Information
      • 5.10.1.1 igmpsnoop use
      • 5.10.1.2 igmpsnoop localgroup
      • 5.10.1.3 igmpsnoop unknown flooding
  • 5.11 Loop Detection Information Settings
    • 5.11.1 Loop Detection Information
      • 5.11.1.1 loopdetect use
      • 5.11.1.2 loopdetect portdisable
      • 5.11.1.3 loopdetect portblock
      • 5.11.1.4 loopdetect interval
      • 5.11.1.5 loopdetect recovery
  • 5.12 ACL Information Settings
    • 5.12.1 ACL Information
      • 5.12.1.1 acl mac
      • 5.12.1.2 acl vlan
      • 5.12.1.3 acl ip
      • 5.12.1.4 acl ip6
      • 5.12.1.5 acl tcp
      • 5.12.1.6 acl udp
      • 5.12.1.7 acl icmp
      • 5.12.1.8 acl description
  • 5.13 AAA Information Settings
    • 5.13.1 Group ID Information
      • 5.13.1.1 aaa name
    • 5.13.2 AAA User Information
      • 5.13.2.1 aaa user id
      • 5.13.2.2 aaa user password
      • 5.13.2.3 aaa user user-role
    • 5.13.3 RADIUS Information Settings
      • 5.13.3.1 aaa radius service
      • 5.13.3.2 aaa radius auth source
      • 5.13.3.3 aaa radius auth message-authenticator
      • 5.13.3.4 aaa radius client server-info auth secret
      • 5.13.3.5 aaa radius client server-info auth address
      • 5.13.3.6 aaa radius client server-info auth port
      • 5.13.3.7 aaa radius client server-info auth deadtime
      • 5.13.3.8 aaa radius client server-info auth priority
      • 5.13.3.9 aaa radius client server-info auth source
      • 5.13.3.10 aaa radius client retry
      • 5.13.3.11 aaa radius client security
  • 5.14 Password Information
    • 5.14.1 password format
    • 5.14.2 password admin set
    • 5.14.3 password user set
    • 5.14.4 password aaa
    • 5.14.5 password authtype
  • 5.15 Device Information Settings
    • 5.15.1 SNMP Information
      • 5.15.1.1 snmp service
      • 5.15.1.2 snmp agent contact
      • 5.15.1.3 snmp agent sysname
      • 5.15.1.4 snmp agent location
      • 5.15.1.5 snmp agent address
      • 5.15.1.6 snmp agent engineid
      • 5.15.1.7 snmp manager
      • 5.15.1.8 snmp trap coldstart
      • 5.15.1.9 snmp trap linkdown
      • 5.15.1.10 snmp trap linkup
      • 5.15.1.11 snmp trap authfail
      • 5.15.1.12 snmp trap newroot
      • 5.15.1.13 snmp trap topologychange
      • 5.15.1.14 snmp trap noserror
      • 5.15.1.15 snmp trap lldpremtableschange
      • 5.15.1.16 snmp rmon
      • 5.15.1.17 snmp user name
      • 5.15.1.18 snmp user address
      • 5.15.1.19 snmp user notification
      • 5.15.1.20 snmp user auth
      • 5.15.1.21 snmp user priv
      • 5.15.1.22 snmp user write
      • 5.15.1.23 snmp user read
      • 5.15.1.24 snmp user notify
      • 5.15.1.25 snmp view subtree
    • 5.15.2 System Log Information
      • 5.15.2.1 syslog server address
      • 5.15.2.2 syslog server pri
      • 5.15.2.3 syslog pri
      • 5.15.2.4 syslog facility
      • 5.15.2.5 syslog security
      • 5.15.2.6 syslog dupcut
      • 5.15.2.7 syslog command-logging
      • 5.15.2.8 syslog header
      • 5.15.2.9 syslog source address
    • 5.15.3 Automatic Time Setting Information
      • 5.15.3.1 time auto server
      • 5.15.3.2 time auto interval
      • 5.15.3.3 time zone
      • 5.15.3.4 time summer-time
    • 5.15.4 ProxyDNS Information
      • 5.15.4.1 proxydns domain
      • 5.15.4.2 proxydns domain move
      • 5.15.4.3 proxydns address
      • 5.15.4.4 proxydns address move
      • 5.15.4.5 proxydns unicode
    • 5.15.5 Host Database Information
      • 5.15.5.1 host name
      • 5.15.5.2 host ip address
      • 5.15.5.3 host ip6 address
    • 5.15.6 Schedule Information
      • 5.15.6.1 schedule at
      • 5.15.6.2 schedule syslog
    • 5.15.7 Filter/QoS Resource Information
      • 5.15.7.1 resource filter distribution
    • 5.15.8 Other
      • 5.15.8.1 addact
      • 5.15.8.2 watchdog service
      • 5.15.8.3 consoleinfo
      • 5.15.8.4 telnetinfo
      • 5.15.8.5 mflag
      • 5.15.8.6 dumpswitch
      • 5.15.8.7 sysname
      • 5.15.8.8 serverinfo ftp
      • 5.15.8.9 serverinfo ftp ip6
      • 5.15.8.10 serverinfo ftp filter
      • 5.15.8.11 serverinfo ftp filter move
      • 5.15.8.12 serverinfo ftp filter default
      • 5.15.8.13 serverinfo sftp
      • 5.15.8.14 serverinfo sftp ip6
      • 5.15.8.15 serverinfo telnet
      • 5.15.8.16 serverinfo telnet ip6
      • 5.15.8.17 serverinfo telnet filter
      • 5.15.8.18 serverinfo telnet filter move
      • 5.15.8.19 serverinfo telnet filter default
      • 5.15.8.20 serverinfo ssh
      • 5.15.8.21 serverinfo ssh ip6
      • 5.15.8.22 serverinfo ssh filter
      • 5.15.8.23 serverinfo ssh filter move
      • 5.15.8.24 serverinfo ssh filter default
      • 5.15.8.25 serverinfo http
      • 5.15.8.26 serverinfo http ip6
      • 5.15.8.27 serverinfo http filter
      • 5.15.8.28 serverinfo http filter move
      • 5.15.8.29 serverinfo http filter default
      • 5.15.8.30 serverinfo dns
      • 5.15.8.31 serverinfo dns ip6
      • 5.15.8.32 serverinfo dns filter
      • 5.15.8.33 serverinfo dns filter move
      • 5.15.8.34 serverinfo dns filter default
      • 5.15.8.35 serverinfo sntp
      • 5.15.8.36 serverinfo sntp ip6
      • 5.15.8.37 serverinfo sntp filter
      • 5.15.8.38 serverinfo sntp filter move
      • 5.15.8.39 serverinfo sntp filter default
      • 5.15.8.40 serverinfo time ip tcp
      • 5.15.8.41 serverinfo time ip6 tcp
      • 5.15.8.42 serverinfo time ip udp
      • 5.15.8.43 serverinfo time ip6 udp
      • 5.15.8.44 serverinfo time filter
      • 5.15.8.45 serverinfo time filter move
      • 5.15.8.46 serverinfo time filter default
  • 5.16 Login banner Settings
    • 5.16.1 Login banner Information
      • 5.16.1.1 login banner telnet
      • 5.16.1.2 login banner ftp
      • 5.16.1.3 login banner ssh
      • 5.16.1.4 login banner description
  • 5.17 Mode and Terminal Operation Commands
    • 5.17.1 Mode Operation Commands
      • 5.17.1.1 admin
      • 5.17.1.2 su
      • 5.17.1.3 exit
      • 5.17.1.4 configure
      • 5.17.1.5 end
      • 5.17.1.6 quit
      • 5.17.1.7 top
      • 5.17.1.8 up
      • 5.17.1.9 !
    • 5.17.2 Terminal Operation Commands
      • 5.17.2.1 terminal pager
      • 5.17.2.2 terminal window
      • 5.17.2.3 terminal charset
      • 5.17.2.4 terminal prompt
      • 5.17.2.5 terminal timestamp
      • 5.17.2.6 terminal bell
      • 5.17.2.7 terminal logging
      • 5.17.2.8 show terminal
    • 5.17.3 Command Execution History
      • 5.17.3.1 show logging command
      • 5.17.3.2 clear logging command
    • 5.17.4 Command Alias
      • 5.17.4.1 alias
      • 5.17.4.2 show alias
      • 5.17.4.3 clear alias
    • 5.17.5 Command Output
      • 5.17.5.1 more
      • 5.17.5.2 tail
  • 5.18 System Operations and Display Commands
    • 5.18.1 System Operations and Display Commands
      • 5.18.1.1 show system information
      • 5.18.1.2 show system status
      • 5.18.1.3 show tech-support
      • 5.18.1.4 show logging error
      • 5.18.1.5 clear logging error
      • 5.18.1.6 show logging syslog
      • 5.18.1.7 clear logging syslog
      • 5.18.1.8 clear statistics
      • 5.18.1.9 show date
      • 5.18.1.10 date
      • 5.18.1.11 rdate
      • 5.18.1.12 reset
  • 5.19 Configuration Display, Delete and Operation Commands
    • 5.19.1 Configuration Display Commands
      • 5.19.1.1 show candidate-config
      • 5.19.1.2 show running-config
      • 5.19.1.3 show startup-config
      • 5.19.1.4 diff
    • 5.19.2 Configuration Delete Commands
      • 5.19.2.1 delete
    • 5.19.3 Configuration Operation Commands
      • 5.19.3.1 load
      • 5.19.3.2 save
      • 5.19.3.3 commit
      • 5.19.3.4 commit try time
      • 5.19.3.5 commit try cancel
      • 5.19.3.6 discard
    • 5.19.4 File Operation Commands
      • 5.19.4.1 dir
      • 5.19.4.2 copy
      • 5.19.4.3 remove
      • 5.19.4.4 rename
      • 5.19.4.5 format
  • 5.20 Ethernet Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.20.1 Ethernet Counter, Log, Statistics, and Status Display Commands
      • 5.20.1.1 show ether
      • 5.20.1.2 show ether brief
      • 5.20.1.3 show ether statistics
      • 5.20.1.4 show ether media-info
      • 5.20.1.5 show ether utilization
      • 5.20.1.6 show ether queue
    • 5.20.2 Ethernet Counter, Log, and Statistics Clear Commands
      • 5.20.2.1 clear ether statistics
  • 5.21 USB connection Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.21.1 USB connection Counter, Log, and Statistics Clear Commands
      • 5.21.1.1 show usb hcd status
      • 5.21.1.2 show usb storage status
  • 5.22 LACP Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.22.1 LACP Counter, Log, Statistics, and Status Display Commands
      • 5.22.1.1 show lacp
      • 5.22.1.2 show lacp statistics
    • 5.22.2 LACP Counter, Log, Statistics, and Status Clear Commands
      • 5.22.2.1 clear lacp statistics
  • 5.23 M1 port Status Display command
    • 5.23.1 M1 port Status Display command
      • 5.23.1.1 show oob
  • 5.24 Interface Counter, Log, Statistics, and Status Display Commands
    • 5.24.1 Interface Counter, Log, Statistics, and Status Display Commands
      • 5.24.1.1 show interface
      • 5.24.1.2 show interface brief
      • 5.24.1.3 show interface summary
  • 5.25 ARP Entry Display and Clear Operation Commands
    • 5.25.1 ARP Entry Display Commands
      • 5.25.1.1 show arp
    • 5.25.2 ARP Entry Clear Commands
      • 5.25.2.1 clear arp
  • 5.26 Routing Table Entry Display Commands
    • 5.26.1 IPv4 Routing Table Entry Display Commands
      • 5.26.1.1 show ip route
      • 5.26.1.2 show ip route summary
      • 5.26.1.3 show ip route kernel
    • 5.26.2 IPv6 Routing Table Entry Display Commands
      • 5.26.2.1 show ipv6 route
      • 5.26.2.2 show ipv6 route summary
      • 5.26.2.3 show ipv6 route kernel
      • 5.26.2.4 show ipv6 ra default-router-list
      • 5.26.2.5 show ipv6 ra prefix-list
  • 5.27 Packet Statistics Display and Clear Operation Commands
    • 5.27.1 IPv4 Packet Statistics Display Commands
      • 5.27.1.1 show ip traffic
    • 5.27.2 IPv4 Packet Statistics Clear Commands
      • 5.27.2.1 clear ip traffic
    • 5.27.3 IPv6 Packet Statistics Display Commands
      • 5.27.3.1 show ipv6 traffic
    • 5.27.4 IPv6 Packet Statistics Clear Commands
      • 5.27.4.1 clear ipv6 traffic
  • 5.28 Bridge Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.28.1 Bridge Counter, Log, Statistics, and Status Display Commands
      • 5.28.1.1 show bridge
    • 5.28.2 Bridge Counter, Log, Statistics, and Status Clear Commands
      • 5.28.2.1 clear bridge
    • 5.28.3 Spanning Tree Counter, Log, Statistics, and Status Display Commands
      • 5.28.3.1 show spanning-tree
      • 5.28.3.2 show spanning-tree instance
    • 5.28.4 Spanning Tree Counter, Log, Statistics, and Status Clear Commands
      • 5.28.4.1 clear spanning-tree statistics
  • 5.29 LLDP Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.29.1 LLDP Counter, Log, Statistics, and Status Display Commands
      • 5.29.1.1 show lldp
      • 5.29.1.2 show lldp summary
      • 5.29.1.3 show lldp neighbors
      • 5.29.1.4 show lldp statistics
    • 5.29.2 LLDP Counter, Log, Statistics, and Status Clear Commands
      • 5.29.2.1 clear lldp neighbors
      • 5.29.2.2 clear lldp statistics
  • 5.30 VLAN Counter, Log, Statistics, and Status Display Commands
    • 5.30.1 VLAN Counter, Log, Statistics, and Status Display Commands
      • 5.30.1.1 show vlan
      • 5.30.1.2 show vlan brief
  • 5.31 QoS Counter, Log, Statistics, and Status Display Commands
    • 5.31.1 COS Queue Counter, Log, Statistics, and Status Display Commands
      • 5.31.1.1 show qos cosmap
      • 5.31.1.2 show qos prioritymap
  • 5.32 SSH Counter, Log, Statistics, and Status Display Commands
    • 5.32.1 SSH Counter, Log, Statistics, and Status Display Commands
      • 5.32.1.1 show ssh server key
  • 5.33 IGMP Snooping Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.33.1 IGMP Snooping Counter, Log, Statistics, and Status Display Commands
      • 5.33.1.1 show igmpsnoop brief
      • 5.33.1.2 show igmpsnoop mrouter
      • 5.33.1.3 show igmpsnoop reporter
      • 5.33.1.4 show igmpsnoop statistics
    • 5.33.2 IGMP Snooping Counter, Log, Statistics, and Status Clear Commands
      • 5.33.2.1 clear igmpsnoop statistics
      • 5.33.2.2 clear igmpsnoop group
  • 5.34 Loopdetection Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.34.1 Loopdetection Counter, Log, Statistics, and Status Display Commands
      • 5.34.1.1 show loopdetect
  • 5.35 AAA Status Display and Clear Operation Commands
    • 5.35.1 AAA Status Display Commands
      • 5.35.1.1 show aaa radius client server-info
  • 5.36 NETTIME (time/sntp) Server and Client Statistics Display and Clear Operation Commands
    • 5.36.1 NETTIME (time/sntp) Statistics Display Commands
      • 5.36.1.1 show nettime status
      • 5.36.1.2 show nettime statistics
    • 5.36.2 NETTIME (time/sntp) Statistics Clear Commands
      • 5.36.2.1 clear nettime statistics
  • 5.37 ProxyDNS Statistics Display and Clear Operation Commands
    • 5.37.1 ProxyDNS Statistics Display Commands
      • 5.37.1.1 show proxydns statistics
    • 5.37.2 ProxyDNS Statistics Clear Commands
      • 5.37.2.1 clear proxydns statistics
  • 5.38 SNMP Statistics Display and Clear Operation Commands
    • 5.38.1 SNMP Statistics Display Commands
      • 5.38.1.1 show snmp statistics
    • 5.38.2 SNMP Statistics Clear Commands
      • 5.38.2.1 clear snmp statistics
  • 5.39 Ethernet L3 Monitor Function Counter, Log, Statistics, and Status Display and Clear Operation Commands
    • 5.39.1 Ethernet L3 Monitor Function Counter, Log, Statistics, and Status Display Commands
      • 5.39.1.1 show icmpwatch
      • 5.39.1.2 show icmpwatch statistics
    • 5.39.2 Ethernet L3 Monitor Function Counter, Log, Statistics, and Status Clear Commands
      • 5.39.2.1 clear icmpwatch statistics
  • 5.40 Login Information Operations and Display Commands
    • 5.40.1 Login Information Display Commands
      • 5.40.1.1 show users
    • 5.40.2 Login Information Operation Commands
      • 5.40.2.1 clear line
  • 5.41 Socket Status Display Commands
    • 5.41.1 Socket Status Display Commands
      • 5.41.1.1 show socket
  • 5.42 Trace Show and Clear Operation Commands
    • 5.42.1 Trace Show Commands
      • 5.42.1.1 show trace ssh
    • 5.42.2 Trace Clear Commands
      • 5.42.2.1 clear trace ssh
  • 5.43 Ethernet Port Control Commands
    • 5.43.1 Ethernet Port Control Commands
      • 5.43.1.1 offline
      • 5.43.1.2 online
  • 5.44 RADIUS Control Commands
    • 5.44.1 RADIUS Control Commands
      • 5.44.1.1 radius recovery
  • 5.45 USB Port Control Commands
    • 5.45.1 USB Port Control Commands
      • 5.45.1.1 usbctl
  • 5.46 I’m here Commands
    • 5.46.1 I’m here Commands
      • 5.46.1.1 iamhere
  • 5.47 Other Commands
    • 5.47.1 Other Commands
      • 5.47.1.1 ping
      • 5.47.1.2 traceroute
      • 5.47.1.3 telnet
  • 5.48 Effect by "commit" Command Execution
• Chapter 6 Managing the Device
  • 6.1 Verifying the Device Operations
    • 6.1.1 Verifying Hardware Status
    • 6.1.2 Verifying System Status
    • 6.1.3 Reviewing Log Messages
      • 6.1.3.1 Format of System Log Message
      • 6.1.3.2 Reviewing Error Logs
  • 6.2 Saving/Restoring Configuration Information
    • 6.2.1 Saving/restoring configuration information using FTP
    • 6.2.2 Saving/restoring configuration information using a Compact Flash Card
    • 6.2.3 Saving/restoring configuration information using USB memory
  • 6.3 Updating Firmware
    • 6.3.1 Updating Firmware Using FTP
    • 6.3.2 Updating Firmware Using CompactFlash card
    • 6.3.3 Updating Firmware Using USB memory
  • 6.4 Actions When Firmware Update Failes (Backup Firm Function)
    • 6.4.1 Preparing the Device
    • 6.4.2 Updating the Firmware
  • 6.5 Extracting of Maintenance Information
    • 6.5.1 Procedure for Extracting Maintenance Information when a System/Subsystem Failure Occurred
• Chapter 7 Troubleshooting
  • 7.1 To Return to the Initial Shipment Settings (Initializing Switch Configuration)
• Appendix
  • A SNMP Traps
    • A.1 Trap List
  • B List of MIBs
    • B.1 Standard MIB Definitions
      • B.1.1 system Group
      • B.1.2 interfaces Group
      • B.1.3 address translation Group
      • B.1.4 ip Group
      • B.1.5 icmp Group
      • B.1.6 tcp Group
      • B.1.7 udp Group
      • B.1.8 dot3 Group
      • B.1.9 snmp Group
      • B.1.10 rmon Group
      • B.1.11 dot1dBridge Group
      • B.1.12 qBridgeMIB Group
      • B.1.13 ifMIB Group
      • B.1.14 radiusMIB Group
    • B.2 Fujitsu Extension MIB
      • B.2.1 nonosSystem Group
      • B.2.2 nonosSystemError Group
      • B.2.3 nonosLineset Group
      • B.2.4 nosDualPower Group
    • B.3 IEEE802.1MIB
      • B.3.1 lldpMIB Group
• Index