Fujitsu Of The Factsheet FTP 639USL103/104/113/114/ 201/202 639usl100 200
User Manual: Fujitsu FTP-639USL103/104/113/114/ 201/202 Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 10
| Download | |
| Open PDF In Browser | View PDF |
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
FUJITSU Component Thermal Printer
FTP-639USL100/200 series
Fujitsu 3” 24V Driving Flexible Module Printer (FMP)
Overview
The FTP-639USL Series is 24V driven receipt printer unit with cutter for 3 inch wide
paper. The unit has our high-speed FTP-639MCL mechanism, cutter and control board,
with an integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as Kiosk, ATM, receipt,
label, and ticket issuing printers for various other equipment.
FTP-639USL100 series
horizontal, without presenter
Features
■■ External presenter option
■■ Ultra high-speed (200mm/sec.)
■■ Medium duty united (mounting is easy)
■■ Auto cutter included
■■ Paper near-end detection function
■■ Up to 10-inch paper roll diameter
■■ Rear paper auto loading
FTP-639USL100 series
vertical, without presenter
■■ Paper jam detection
■■ Prints 2-D barcodes
■
FTP-639USL200 series
with presenter
Designation
Part Number
Item
Printer module interface
Interface cable
Page 1 of 10
USB (ver. 2.0)
FTP-639USL103
Serial (RS-232C) / USB (ver. 2.0)
FTP-639USL104
USB (ver. 2.0)
FTP-639USL113
Serial (RS-232C) / USB (ver. 2.0)
FTP-639USL114
USB (ver. 2.0)
FTP-639USL201
Serial (RS-232C) / USB (ver. 2.0)
FTP-639USL202
USB interface
FTP-629Y301
RS-232C Interface
FTP-629Y302
Power for logic, head, motor
FTP-629Y603
Comment
without presenter and with paper arm
without presenter and without paper arm
with presenter and with paper arm
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
■
Specifications
Item
Specifications
Part number
FTP-639USL103/104
Printing method
Thermal-sensitive line dot method
Dot structure
576 dots/line
Dot pitch (horizontal)
0.125 mm (dot density:8 dots/mm)
Effective printing area
72 mm
Paper
Width
80 mm (standard setting) 82.5 mm paper is available with optional paper guide)
Thickness
60 to 100 µm (depending on paper specifications)
Diameter
Φ150 mm (standard setting, inner diameter Φ 25.4 mm) *1
FTP-639USL113/114
Cutting type
Full or partial
Power supply
24VDC ±10% approx. 5.7A*
Printing speed
Max. 200 mm/s (1600 dotlines/s) (High speed batch image printing, at 25°C)
Printing digit number
Max. 72 (at 8 x 16 one byte characters)
Printing
specifications
Full or partial
FTP-639USL201/202
Printing mode
Line mode
Character
Types
Alphanumeric KANA: 159, Registered: 94, International: 195, OCR I: 103, OCR II: 23, OCR IV:
103, JIS KANJI: approximately 6800, Extended: 11
Barcode
types
1 dimension
UPC-A, UPC-E, JAN(EAN)13, JAN(EAN)8, CODE39, ITF, CODABAR, CODE128
2 dimension
QR, PDF417
Character composition, dimensions (H x W),
Number of characters
24 x 12 dots (3.0 x 1.5 mm), 48 columns
24 x 24 dots (3.0 x 3.0 mm), 24 columns
16 x 8 dots (2.0 x 1.0 mm), 72 columns
16 x 16 dots (2.0 x 2.0 mm), 36 columns
OCR I: 24 x 40, 24 columns
OCR III: 24 x 45, 24 columns
OCR IV: 36 x 60, 16 columns
Extended: 24 x 48, 24 columns
Interface
Serial (RS232C), USB
For head
24VDC ±5%, voltage
Current: average*4 ( ): Peak 12.5% printing ratio
1.0 (2.0) A (at 200 mm/s printing speed,1 division image)
0.8 (1.1) A (at 125 mm/s printing speed, 2 divisions)
0.6 (1.0) A (at 80 mm/s printing speed, 2 divisions)
0.6 (2.0) A (at 80 mm/s printing speed, automatic divison)
For printer motor
24VDC ±5%, 1.3 A maximum, 1.0 A average
For presenter
24VDC ±5%, 1.3 A maximum, 1.0 A average
For cutter
24VDC ±5%, 1.4 A maximum
For logic
5VDC ±5%, 0.2 A maximum (converted from 24V)
Arm vertical
112.6 x 96.4 x 75.1 mm
Arm horizontal
112.6 x 215.7 x 99.6 mm*3
Power supply
Dimensions
(WxDxH)
Full
24VDC ±10% approx. 7A*2
2
112.6 x 94.5 x 75.1
123.0 x 145.2 x 75.1 mm
123 x 264.5 x 99.6 mm)*3
Presenter (receipt length)
n/a
n/a
65 to 254 mm
Weight (approximately, excluding paper)
990 g (with arm)
760 g (without arm)
1200 g (with arm & presenter)
*1: Φ 83 mm paper can be used by changing paper feed shaft. Max. Φ 254 mm (10-inch) paper can be used by using a bigger diameter paper holder.
*2: Super high speed mode, batch printing, at printing rate 25%
*3: Excludes protrusions (screws, dumper, etc.) and cables
*4 : There may be exceptions
Page 2 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
Item
Specifications
Part number
FTP-639USL103/104
Head
Expected life
Environmental
conditions
Detection
Recommended
thermal sensitive
paper
Paper diameter
FTP-639USL113/114
FTP-639USL201/202
Pulse resistance
100 milion pulse/dot (using Fujitsu’s standard driving method)
Wear resistance
100 km (at max. 12.5% printing ratio, with PD150R (Oji) paper
Cutter
1, 000, 000 cuts with PD150R (Oji) paper, cutting frequency min. 3s/cut, at 20°C ± 5°C
Operating temperature
-20°C to +60°C*5
Operating humidity
10 to 85% RH (no condensation)
Storage temperature
-25°C to +65°C
Storage humidity
5 to 90% RH (no condensation)
Head temperature
By thermistor (applied energy control, abnormal temperature detection)
Paper out/Mark detect
By photointerrupter
Platen open
By photointerrupter
Near end paper
By mechanical switch
Standard paper
TF-60KS-E (Nippon paper), FTP-020P0104 (58mm),
PD150R (Oji paper), FTP-020P0701 (58mm)
Medium term paper
TF-60KS-F1 (Nippon paper), FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
Long term paper
PD160R-N (Oji paper)
-20°C to +60°C*5
-25°C to +65°C
0°C to +50°C*5
-20°C to +60°C
Max. 150 mm
* : Color density is guaranteed: +5°Cto +40°C with standard paper
5
Page 3 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
■
Dimensions
•
External dimension chart of the control board
Drawing-1
CN5
CN6
SW2
CN10
Connector types of control board for printer and cutter
No.
Name
CN1
Power connector
Remarks
Connect +24VCN6
power supply
-
CN5
Connect RS-232
SW2
depends on model
CN4
USB interface connector
CN5
Drawing-2
Thermal head connector
CN1
RS-232 connector
SW1
interface
CN6
Paper feed motor
CN4
CN2
Function
Drawing-1
CN7
•
CN9 CN8
CN4
CN1
CN7
SW1
CN7
Cutter motor connector
Connect cutter motor
CN8
Near end sensor connector
Connect near end switch or sensor
Connect paper feed motor
External sensor connector
Connect external sensor
Presenter connector
Connect control board
•
optional
depends on model
CN6
CN9
CN10
-
CN3
CN5
CN4
CN10 CN1
depends on model
-
CN9 CN8
Connect USB interface
Connect thermal head
Presenter control board dimension
CN1
CN3
Drawing-3
CN6
CN5
CN4
Drawing-2
CN1
•
Connector types of control board for presentor
No.
CN1
CN3
Name
Function
Control board connector
Drawing-3
Paper sensor connector
Remarks
CN2
-
Connect to paper feed sensor
-
Connect control to board
CN5
Paper feed motor connector
Connect to paper feed motor
-
CN6
Motor and sensor connector
CN1 to motor and sensor
Connect
-
CN2
Page 4 of 10
http://us.fujitsu.com/thermal-printers
Drawing-2
CN3
CN5
CN4
CN1
CN6
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
•
External view of the RS-232C interface circuit board
Drawing-3
CN1
CN2
•
RS-232C interface connector types
No.
Name
Function
Remarks
CN1
Internal connection connector
Connector for internal connection
-
CN2
RS-232C interface connector
Connector for connecting RS-232C interface
-
■
Dimensions
•
Printer without presenter and standard arm - FTP-639USL103/104
Status LED
Feed switch
Reset switch
Side view - A
CN1
A
CN2
At cutter option
Paper feed arm
CN4 (FTP-639USL104)
Unit: mm
Excluding lever and protrusions. ( ) is reference value.
Page 5 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
■
Dimensions
•
Modular printer without presenter and standard paper roll - FTP-639USL113/114
96.4
112.6 (excl. protrusion)
可動刃動作ノブ
注
意
75.1
MOVABLE BLADE
OPERATION KNOB
動作中に触らないで下さい
DO NOT TOUCH
DURING OPERATION
ＣＡＵＴＩＯＮ
刃に触らないで下さい｡
ＤＯ ＮＯＴ ＴＯＵＣＨ ＴＨＥ ＣＵＴＴＩＮＧＥＤＧＥ
■
Dimensions
•
Modular printer with presenter - FTP-639USL201/202
FUJITSU ＣＯＮＰＯＮＥＮＴ
F.T ＪＡＰＡＮ
145.2
(264.5)
φ
(202 only)
0
USB connector
0.
RS-232C connector
15
(99.6)
75.1
Cutter open
(158.0)
123.0
Power connector
(325.5)
Paper loop guide open
Excluding lever and protrusions. ( ) is reference value.
Page 6 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
■
■
Connector specifications
No.
Name
CN1
Power connector
CN2
USB interface connector
CN4
RS-232C interface connector
Connector pin assignment
• CN1: Power connector
Connector used in the printer: B2PS-VH(LF)(SN) (JST)
Recommended mating connector: VHR-2 (JST)
Pin no.
1
■
Signal
I/O
Description
Pin no.
Signal
I/O
Description
24V
I
Power supply
2
GND
-
Power ground
Connector pin assignment
• CN2: USB interface connector
Connector used in the printer: 51387-0530 (Molex)
Recommended mating connector: UX40-MB-5P (Hirose)
Pin no.
Signal
I/O
Description
Pin no.
Signal
I/O
Description
1
VBUS
I
Bus power supply
2
D-
I/O
Differential data input/output D-
3
D+
I/O
Differential data input/output D+
4
NC
-
Not connected
5
GND
-
Signal ground
■
Connector pin assignment
• CN4: RS-232C interface connector
Connector used in the printer: S9B-ZR-SM4A-TF (LF) (JST)
Recommended mating connector: ZHR-9 (JST)
Pin no.
Signal
I/O
Description
Pin no.
Signal
I/O
Description
1
FG
-
Frame ground
2
RXD
I
Incoming data
3
TXD
O
Outgoing data
4
DTR
O
Request to send data (data terminal ready)
5
GND
-
Signal ground
6
DSR
I
Consent to send data (data set ready)
7
/STCLIN
I
Detection setting signal
8
/INPRM
I
Initialization requirement signal
9
/ATF
I
Paper feed signal
· Please note that connectors used in this printer are subject to change without prior notice.
· Please confirm compatability when using equivalent mating connector(s).
■
Host interface specifications
Type
Specification
USB V2.0
Data transmission speed: Full speed mode 12Mbps
Data input/output format: Differential input/output
RS-232C
Data transmission speed: 19,200 (460,800; 230,400; 155,200; 38,400; 9,600) bps. Setting can be changed with command
Synchronization/transmission method: asynchronous method, full-duplex transmission
Flow control: RTS(DTR)/CTS(DSR) signal or XON/XOFF. Can be changed with command
Input/output level: RS-232C level
Page 7 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
■
Connector pin assignments of printer mechanism (FPC)
No
Signal
Content
1
HT
Moves print position to the next tab
2
LE
Line fee
3
FF
Feeds forms (new page)
4
ESC EM+n
Setting the amount of the feeding at automatic paper feed
5
ESC RS
Sets reverse printing
6
ESC US
Resets reverse printing
7
ESC SP+n
Character spacing setting
8
ESC ! +n
Sets print mode
9
ESC % +n
External registration character specification/cancellation
10
ESC & +y+c1+c2+x+d1to dn
External registration character definition
11
ESC *+m+n1+n2+d1 to dk
Sets bit map image
12
ESC - +n
Underline setting
13
ESC 2
Sets 1/6 inch line feed length
14
ESC 3+n
Sets the fine line feed length
15
ESC ?+n
External registration character deletion
16
ESC @
Printer initialization
17
ESC A+n
Sets the space between the line
18
ESC C+n
Set the page length by character line
19
ESC D+n1 to nk+NUL
Sets the tab position
20
ESC J+n
Feed paper in forward direction and prints
21
ESC K+n
Reverse paper feed
22
ESC R+n
Selects international character
23
ESC V+n
Right rotation 90° specification / cancellation
24
ESC X+m+n
Setting the turning time of the motor excitation
25
ESC c+1+n
Sets internal processing
26
ESC c+5+n
Panel switch enable/disable setting
27
ESC d+n
Printing and n-line feeding
28
ESC e+n
Prints and reverse feed n-lines
29
ESC s+n
Sets printing speed
30
ESC t+n
Character code table selection
31
ESC {+n
Sets/resets upside down printing
32
ESC DEL+n
Platen switch release
33
FS !+n
Kanji printing mode specification
34
FS &
Kanji printing mode collective specification
35
FS - + n
Kanji underline specification /cancellation
36
FS *+ m+n1+n2+d1 to dk
High speed collective image printing specified
37
FS .
Kanji printing mode cancellation
38
FS 2+c1+c2+d1 to dn
External character definition
39
FS 9+n
Sets the detection functions
40
FS C+n
Kanji code system selection
Page 8 of 10
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
No
Signal
Content
41
FS E+n
Correction of impressed energy
42
FS S+n1+n2
Kanji spacing setting
43
FS W+n
Kanji double height and width printing specification/cancellation
44
FS r+n*
Parameter transmission
45
GS !+n
Character size specification
46
GS & +m + x + y1 + y2 + d1 to dn
Registered bit image definiton
47
GS '+m+n
Registered bit image printing
48
GS (+E+L1+L2+fn+d1 to d9)
RS-232C communication setting*1
49
GS <
Line feeds to the next mark
50
GS A+m+n
Sets the line feed length after mark detection
51
GS E+n
Sets the print quality
52
GS L+n1+n2
Left margin position setting
53
GS V+m+n
Sets 1/6 inch line feed length
54
GS W+n1+n2
Printing area width setting
55
GS a+n
Automatic status transmission setting*1
56
GS e+m+n
Sets bar code width
57
GS h+n
Sets bar code height
58
GS k+m+n+d1 to dn
Bar code printing
60
GS k+m+k1+k2+k3+k4+p+d1 to dn+NUL
Print 2-barcode (QR)
61
GS k+m+k1+k2+k3+k4+n1+nh+d1 to dn
Print 2D barcode (PDF417)
62
GS s
Paper check*2
63
GS t+n
Paper exit*2
64
GS w+n
Sets bar code length
65
GS x+n
Paper retract*2
66
GS y
Preparation for paper exit*2
67
GS z
Retracting paper*2
1
*1: These commands are valid with FTP-629DSL350 series serial interface
*2: FTP-639USL201/202 only
■
Options
• Cables
Type
Interface cable
Part Number
Length
USB
FTP-629Y301
USB A - USB miniB
Approx. 1m (39.4 inches)
RS-232C
FTP-629Y302
ZHR-9 (JST) Connector is assembled at one side (printer side)
Approx. 0.5m (19.4 inches)
FTP-629Y603
VHR-2 (JST) Connector is assembled at one side (printer side)
Approx. 0.5m (19.4 inches)
Power supply cable
Page 9 of 10
Connector
http://us.fujitsu.com/thermal-printers
Data Sheet FUJITSU Component Thermal Printer FTP-639USL100 / 200
Contact
Japan
FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower
12-4, Higashi-shinagawa 4-chome,
Tokyo 140 0002, Japan
Tel: (81-3) 3450-1682
Fax: (81-3) 3474-2385
Email: fcl-contact@cs.jp.fujitsu.com
Web: www.fcl.fujitsu.com
Europe
FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
FUJITSU COMPONENTS AMERICA, INC.
2290 North First Street, Suite 212
San Jose, CA 95131 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Asia Pacific
FUJITSU COMPONENTS ASIA, Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex,
Singapore 118529
Tel: (65) 6375-8560 / Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fujitsu.com/sg/services/micro/components
Page 10 of 10
Copyright
All trademarks or registered
trademarks are the property of
their respective owners.
Fujitsu Components America or
its affiliates do not warrant
that the content of datasheet
is error free. In a continuing
effort to improve our products
Fujitsu Components America,
Hong Kong
Inc. or its affiliates reserve the
FUJITSU COMPONENTS HONG KONG Co., Ltd.
right to change specifications/
Room 06, 28/F, Greenfield Tower, Concordia
datasheets without prior
Plaza, No.1 Science Museum Road,
notice. Copyright ©2016
Tsim Sha Tsui East, Kowloon, Hong Kong
Fujitsu Components America,
Tel: (852) 2881 8495 Fax: (852) 2894 9512
Inc.
Email: fcal@fcal.fujitsu.com
All rights reserved.
www.fujitsu.com/sg/services/micro/components Revised May 12, 2016
China
FUJITSU ELECTRONIC COMPONENTS
(SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070, China
Tel: (86 21) 3253 0998
Fax: (86 21) 3253 0997
Email: fcal@fcal.fujitsu.com
www.fujitsu.com/sg/services/micro/components
http://us.fujitsu.com/thermal-printers
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Instance ID : uuid:38545cc4-ba78-4ce5-8b14-8417b2a3208f Original Document ID : adobe:docid:indd:5e25a8a7-80b8-11dd-a082-f1648f0ac1ea Document ID : xmp.id:8fda6dce-032f-ac4b-9a41-61451ba9c01d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:d71e4da3-a66f-074f-b9fc-9ae958e2e6b4 Derived From Document ID : xmp.did:5C5658939204E511B263DDDF7397BE4D Derived From Original Document ID: adobe:docid:indd:5e25a8a7-80b8-11dd-a082-f1648f0ac1ea Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:05:12 11:20:24-07:00 Modify Date : 2016:05:12 11:20:27-07:00 Metadata Date : 2016:05:12 11:20:27-07:00 Create Date : 2016:05:12 11:20:24-07:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Format : application/pdf Rights : ©2012 Fujitsu America, Inc. All rights reserved Creator : Fujitsu America Title : Fujitsu-title-of-the-factsheet Description : Description-title-of-the-factsheet Subject : Key, words, here Web Statement : http://solutions.us.fujitsu.com/www/content/legal_resources/trademarks.php Marked : True Authors Position : Fujitsu America, Inc. Caption Writer : Fujitsu America, Inc. Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 10 Author : Fujitsu AmericaEXIF Metadata provided by EXIF.tools