Fujitsu FTR F1 (8A) Series F1r
User Manual: Fujitsu FTR-F1 (8A) Series Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
FTR-K1 SERIES POWER RELAY 2 POLES - 8A Low Profile Type FTR-F1 R Series n FEATURES l l l l l l Note: Image of standard FTR-F1 relay l DPST/DPDT 8A Low profile power relay (height 16.5 mm) employing unique construction High insulation by employing reinforced insulation construction Insulation distance: 8 mm (between coil and contact) Dielectric strength: 5 kV (between coil and contact) Surge strength: 10 kV (between coil and contact) Pin configuration compatible to VB UL, CSA, VDE, SEMKO, CQC recognized Flux proof sealing, RTII RoHS Compliant Please see page 6 for more information n PARTNUMBER INFORMATION [Example] (a) FTR-F1 A (a) (b) Relay type L (c) 005 (d) R - RG (e) (f ) FTR-F1 : FTR-F1 Series (b) Contact configuration A C: (c) Coil type L : 2 form A (SPST-NO) : 2 form C (DPDT) (d) Coil rated voltage 005 : 3....48VDC Coil rating table at page 3 : High sensitive type (400mW) (e) Contact rating R : 8A (f) Special type RG : Transparent cover type Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-F1AL005R Actual marking: F1AL005R 1 FTR-K1SERIES SERIES FTR-F1 n SPECIFICATION Item Contact Data Standard type F1 (A, C) L ( ) R Configuration 2 form A (DPST-NO), 2 form C (DPDT) Construction Single Material Movable: gold plate silver tin oxide; Stationary: Silver tin oxide Resistance (initial) Max. 100mOhm at 1A, 6VDC Contact rating Max. carrying current Life 8A, 250VAC / 24VDC *1 Timing Data Insulation 8A Max. switching voltage 400VAC/ 300VDC Max. switching power 2,000VA, 192W Min. switching load *2 10mA, 5VDC Mechanical Min. 20x 106 operations Electrical Coil Data Transparent cover F1 (A, C) L ( ) R - RG AC load Min. 50 x 103 operations DC load Min. 50 x 103 operations Rated Power (at 20 ° C) 400mW Operate Power (at 20 ° C) 225mW Operating temperature range -40 to +75 °C (no frost) Operate (at nominal voltage) Max. 15ms (no diode, without bounce) Release (at nominal voltage) Max. 5ms (no diode, without bounce) Resistance (Initial) Min. 1,000MOhm at 500VDC Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min. Coil and contacts 5,000VAC (50/60Hz) 1min. -40 to +70 °C (no frost) Adjacent contacts 3,000VAC (50/60Hz) 1 min. Surge strength 10.000V/ 1.2 x 50µs standard wave Clearance 8 mm Creepage 8 mm EN61810-1, VDE0435 Other Coil and contacts Vibration Resistance Shock Voltage 250V Pollution degree 3 Material group IIIa Category C / 250V (reference voltage) (VDE0110b) Misoperation 10 to 55Hz double amplitude 1.65mm Endurance 10 to 55Hz double amplitude 3.3mm Misoperation Min. 100 m/s² (11 ± 1ms) Endurance Min. 1,000 m/s² (6 ± 1ms) Weight Approximately 13 g Sealing Flux proof, RTII *1 At carry currents > 10A PCB layout need to be considered. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. 2 FTR-K1SERIES SERIES FTR-F1 n COIL RATING 400mW type Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Max. Coil Voltage Voltage (VDC) (VDC) * 003 3 22.5 2.25 0.3 6 005 5 62 3.75 0.5 10 006 6 90 4.5 0.6 12 009 9 202 6.75 0.9 18 012 12 360 9 1.2 24 024 24 1,440 18 2.4 48 048 48 5,760 36 4.8 96 Rated Power (mW) 400 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E63614 CSA C22.2 No. 14 LR 40304 VDE 0435, 0631, 0700, 0860 40013858 8A, 24VDC (resistive) 8A, 250 VAC (resistive) 1/6 HP, 125VAC 1/4 HP, 250VAC Pilot duty: C300, R300 8A, 250 VAC (cosφ=1) 8 A 24VDC (0ms) Complies with BSI, IMC, CQC 3 FTR-K1SERIES SERIES FTR-F1 n CHARACTERISTIC DATA 8A Rating type 4 FTR-K1SERIES SERIES FTR-F1 n DIMENSIONS l Dimensions FTR-F1A type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) FTR-F1C type Unit: mm 5 FTR-K1SERIES SERIES FTR-F1 RoHS Compliance and Lead Free Information 1. General Information l l l l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 6 FTR-K1SERIES SERIES FTR-F1 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 22, 2010 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-702 Instance ID : uuid:2a6ded38-b5c2-474c-8347-da9e05366126 Document ID : xmp.did:FEE0004BD99BDF1198C3947B4F7A25F2 Original Document ID : adobe:docid:indd:f999c843-da65-11de-ab47-910ddeabf76e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FDE0004BD99BDF1198C3947B4F7A25F2 Derived From Document ID : xmp.did:DF73DC307C95DF11BD5B8EF848F8DDD8 Derived From Original Document ID: adobe:docid:indd:f999c843-da65-11de-ab47-910ddeabf76e Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:DC73DC307C95DF11BD5B8EF848F8DDD8, xmp.iid:DD73DC307C95DF11BD5B8EF848F8DDD8, xmp.iid:DE73DC307C95DF11BD5B8EF848F8DDD8, xmp.iid:DF73DC307C95DF11BD5B8EF848F8DDD8, xmp.iid:FDE0004BD99BDF1198C3947B4F7A25F2, xmp.iid:FEE0004BD99BDF1198C3947B4F7A25F2 History When : 2010:07:22 14:01:11+02:00, 2010:07:22 14:01:11+02:00, 2010:07:22 14:02:51+02:00, 2010:07:22 14:02:51+02:00, 2010:07:30 14:52:21+02:00, 2010:07:30 14:52:21+02:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /metadata, /;/metadata, /metadata, /;/metadata Create Date : 2010:07:30 14:52:31+02:00 Modify Date : 2010:09:20 13:46:03-07:00 Metadata Date : 2010:09:20 13:46:03-07:00 Creator Tool : Adobe InDesign CS4 (6.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9824 bytes, use -b option to extract) Doc Change Count : 587 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 7 Creator : Adobe InDesign CS4 (6.0.5)EXIF Metadata provided by EXIF.tools