Fujitsu FTR F3 (10A 1 Form C) 10a Cc
User Manual: Fujitsu FTR-F3 (10A 1 form C) Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 5
| Download | |
| Open PDF In Browser | View PDF |
Preliminary New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series n FEATURES l l l l l l l Low profile and space saving - Height: 15mm - Mounting space: 164mm2 High insulation - Insulation distance: 7mm between coil and contacts - Dielectric strength: 4,000VAC between coil and contacts - Surge strength: 10,000V between coil and contacts Plastic materials - UL94 flame class V-0 Cadmium free relay Lead free relay Plastic sealed type RoHS compliant Please see page 4 for more information n PARTNUMBER INFORMATION [Example] FTR-F3 (a) C (b) A (c) 012 (d) E - HC (e) (f) (a) Relay type FTR-F3 : FTR-F3-Series (b) Contact configuration C : 1 form C (c) Coil type (power) A : 360mW (d) Coil rated voltage 012 : 5.....24 VDC Coil rating table at page 3 (e) Contact material E : Ag Alloy (f) Enclosure HC HK : Flux proof type : Sealed type Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-F3CA012E Actual marking: F3CA012E 1 FTR-F3 SERIES FTR-K1 SERIES Preliminary n SPECIFICATION Item FTR-F3 FTR-F3CA( )E-HC Contact Data Life Coil Data Timing Data Insulation Configuration 1 form C (SPDT) Construction Single Material Ag Alloy Resistance (initial) Max. 100mOhm at 1A, 6VDC Contact rating (resistive) 10A, 250VAC Max. carrying current 10A Max. switching voltage 277VAC Max. switching power 2,500VAC Min. switching load * 100 mA, 5VDC Mechanical Min. 20 x 106 operations Electrical (at rated load) Make: 50 x 103 operations Break: 10 x 103 operations Rated power (20 °C) 360mW Operating temperature range -40 °C to +85 °C (no frost) Operate (at nominal voltage) Max. 10ms (without bounce) Release (at nominal voltage) Max. 10ms (without bounce) Resistance (initial) Min. 1,000MOhm at 500VDC Dielectric strength Surge strength Other Vibration resistance Shock Open contacts FTR-F3CA( )E-HK Make: 10 x 103 operations Break: 6 x 103 operations 750VAC (50/60Hz) 1min Contacts to coil 4,000VAC (50/60Hz) 1min Contacts to coil 10,000V / 1.2 x 50µs standard wave Misoperation 10 to 55Hz double amplitude 1.5mm Endurance 10 to 55Hz double amplitude 1.5mm Misoperation Min. 100m/s2 (11±1ms) Endurance Min. 1,000m/s2 (6±1ms) Weight Approximately 6g Enclosure Flux proof Plastic sealed * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1 SERIES FTR-F3 SERIES Preliminary n COIL RATING Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 005 5 69 3.75 0.5 006 6 100 4.5 0.6 009 9 225 6.75 0.9 012 12 400 9 1.2 018 18 900 13.5 1.8 024 24 1,600 18 2.4 Note: All values in the tables are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS (Plan) Type Contact rating FTR-F3CA( )E-HC UL Flammability: UL 94-V0 (plastics) CSA 10A, 250VAC (resistive) FTR-F3CA( )E-HK 10A, 250VAC (resistive) VDE n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm 3 FTR-K1 SERIES FTR-F3 SERIES Preliminary RoHS Compliance and Lead Free Information 1. General Information l l l l All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives. As per Annex III of directive 2011/65/EU. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Condition l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder Condition: Pre-heating: maximum 120˚C within 90 sec. Soldering: dip within 5 sec. at 255˚C ± 5˚C solder bath Relay must be cooled by air immediately after soldering Solder by Soldering Iron: Soldering Iron Temperature: Duration: 30-60W maximum 350-360˚C maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 4 FTR-K1 SERIES FTR-F3 SERIES Preliminary Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ ©2014 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. June 26, 2014 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:07:28 11:16:55+02:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2017:12:19 17:19:22+09:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:66d5e6f2-ee46-4f13-947e-8e0044aee6ee Original Document ID : adobe:docid:indd:1f57ce70-26d1-11df-b2c5-fa5c947f753e Document ID : xmp.id:61712FE83716E411BBB0F6021626FD11 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:60712FE83716E411BBB0F6021626FD11 Derived From Document ID : xmp.did:0C6C3C933716E411BBB0F6021626FD11 Derived From Original Document ID: adobe:docid:indd:1f57ce70-26d1-11df-b2c5-fa5c947f753e Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:07:28 11:16:55+02:00 Metadata Date : 2017:12:19 17:19:22+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 5EXIF Metadata provided by EXIF.tools