Fujitsu FTR P6 Series
User Manual: Fujitsu FTR-P6 Series Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
MINIATURE SURFACE MOUNT RELAY For automotive applications 1 POLE - 25A FTR-P6 Series ■■ FEATURES • Surface mount relays for automotive applications • Miniature size (67% of the volume of FTR-P3 relays) • High contact capacity with proven contact material (100,000 operations, 14V, 25A) • Low coil power dissipation (800mW nominal achieved with state-of-the-art magnetic design) • Semi low noise (average acoustic noise level: 60dB distance 5cm) • Application examples: Power window, door lock, power seat, sunroof, wiper • RoHS compliant Please see page 7 for more information ■■ Part Numbers [Example] FTR-P6 G N 012 WA ** (a) (b) (c) (d) (e) (f) (a) Relay type FTR-P6 : FTR-P6 series (b) Contact configuration G : 1 form C (c) Contact gap N : 0.25mm gap (d) Contact rated voltage 012 : 10..... 12VDC Coil rating table at page 3 (e) Contact material WA : Silver-tin oxide indium (f) Special type None : Standard package DP : Dry package Others : To be assigned custom specification Actual marking does not carry the type name: "FTR" E.g.: Ordering code: FTR-P6GN012WA Actual marking: P6GN012WA 1 FTR-P6 Series ■■ Specifications Item FTR-P6 Remarks / conditions Contact Configuration data Material 1 form C Silver-tin oxide Voltage drop Max. 100 mV Contact rating 25A, 14VDC Max. carrying current Max. inrush current Min. switching load * Coil 25A / 1h 1A, 6VDC 25°C, nominal voltage applied to coil Reference Coil power consumption Approx. 0.8W At rated coil voltage Operating temperature range -40ºC ~ +85ºC No frost Storage temperature range -40ºC ~ +100ºC No frost Operating humidity 45 to 85% RH Operate Max. 10ms Release Max. 5ms Life Mechanical Min. 1 x 10⁶ operations Electrical Other Motor locked 35A Timing data Insulation At 1A, 12VDC (resistance) Min. 100 x 10³ operations Insulation resistance Min. 100MΩ at 500VDC Dielectric Open conwithstanding tacts voltage Coil contact 500VAC (50/60Hz), 1 minute Vibration resistance Misoperation 10 to 200Hz, 44m/s2 (4.5G), constant acceleration Endurance 10 to 200Hz, 44m/s2 (4.5G), constant acceleration Shock resistance Initial 500VAC (50/60Hz), 1 minute Misoperation Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Dimensions / weight 14VDC, 25A locked motor 9.0 x 12.0 x 10.3 mm / approx. 3.3g : Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. Note: Care shall be taken on the heat generated on PC board when maximum carrying current exceeds 10A. Please perform the confirmation test with actual conditions. * 2 FTR-P6 Series ■■ Coil Data Coil code Rated Coil Voltage Coil Resistance +/-10% Must Operate Voltage* Must Release Voltage* (VDC) (Ω) (VDC) (VDC) 010 10 125 6.5 (at 20ºC) 8.2 (at 85ºC) 0.8 (at 20ºC) 1.0 (at 85ºC) 012 12 180 7.3 (at 20ºC) 9.2 (at 85ºC) 1.0 (at 20ºC) 1.3 (at 85ºC) Note: All values in the table are valid at 20oC and zero contact current, unless otherwise specified. * : Specified operated values are valid for pulse wave voltage. ■■ Dimensions • Dimensions *Dimensions of the terminals do not include thickness of pre-solder. • Schematics (TOP VIEW) • PC Board Mouting Hole Layout (TOP VIEW) ( ): Reference value Unit: mm 3 FTR-P6 Series 0.4 0.4 Ø1.55 φ1.55 Ø2.2 φ2.2 2.0 2.0 4.0 11.511.5 12.5 12.5 φ380 Top cover tape φ13.0 24.0 11.9 11.0 Embossed carrier tape 11.0 4.0 11.9 24.0 24.0 25.5 1.75 1.75 ■■ Packaging 24.0 ■■ Characteristic Data (Reference) Life test (example) Operate / release voltage Test condition 25A 16VDC motor lock 100,000 operations min. 0.5 sec. ON, 5.5 sec. OFF Operate voltage Voltage (V) Test circuit RL-1 N.O. N.C. 10 5 Release voltage M N.O. 0 0.1 N.C. RL-2 Current wave form 6 sec 25 A 0A 0.5 sec 0.5 sec 100 10 1 0.1 Initial 1 10 Number of operations (x10 4 ) 100 10 Operate voltage Voltage (V) RL N.O. N.C. Make Break Operate / release voltage Test condition Inrush current 20A, 16VDC motor free 400,000 operations min. 1.5 sec. ON, 2.0 sec. OFF Test circuit 100 (Measured at DC 6V, 1A wet) 1000 Contact resistance (mΩ) （RL-1） 1 10 Number of operations (x10 4 ) Initial 5 Release voltage 4 0.5 sec Contact resist 0.5 sec FTR-P6 Series 1 10 Number of operations (x10 4 ) Initial 100 10 Operate voltage Voltage (V) RL N.O. N.C. 1 0.1 Operate / release voltage Test condition Inrush current 20A, 16VDC motor free 400,000 operations min. 1.5 sec. ON, 2.0 sec. OFF Test circuit 10 5 Release voltage M 0 0.1 Contact resistance (mΩ) 20 A 5A 19 A Make Break 100 10 1 0.1 1 10 Number of operations (x10 4 ) Initial Coil temperature rise Contact carry current 20A Coil temperature rise(℃) 90 Contact carry current 10A 60 Contact carry current 0A 50 0.8 W 0.8 W 0.8 W 40 30 20 10 0 10 20 (FTR-P6GN012WA) 140 80 70 100 Operating coil voltage range Ratio to nominal coil voltage (%) 100 100 (Measured at DC 6V, 1A wet) 1000 Current wave form 0A 1 10 Number of operations (x10 4 ) Initial 30 40 Intermittent operations need to be at 15A continuous current 120 100 Continuous coil operation 80 60 erate op Must ge volta 40 Applied time (minutes) -30 -20 0 20 40 60 80 100 Ambient temperature (℃) Vibration resistance characteristics 100 5 Dual amplitude (mm) 1 0.5 0.1 0.01 5 Frequency: 10 to 2000Hz 2 Ratio 20 10 0 10 20 30 60 Must te opera 40 40 FTR-P6 Series Applied time (minutes) -30 -20 0 20 40 60 80 100 Ambient temperature (℃) Vibration resistance characteristics 5 Acceleration (m/s2) 100 50 Dual amplitude (mm) 1 0.5 0.1 0.01 Frequency: 10 to 2000Hz Acceleration: 100m/s2 max. Direction of vibration: See diagram below Direction level: chatter > 1ms Automotive electronics standard 44 m/s2 Range where chattering occurs N.O.contact coil not energized on X-direction 10 10 50 100 Frequency (Hz) 500 1000 Y X Z 2000 Shock resistance characteristics 1,000 Shock application time: 6±1ms, half-sine wave Test condition: Coil energized and de-energized Shock direction: See diagram below Direction level: chatter > 1ms Shock level (m/s2) 800 600 X1 Y2 400 X2 200 0 Z1 X1 X2 Y1 Y2 Z1 Z2 Shock direction FTR-P6GN012WA n＝100 Operate voltage Release voltage : Break contact (coil de-energized) : Make contact (coil energized) Distribution of operate/release time 100 FTR-P6GN012WA n＝100 80 60 40 Distribution (%) 80 60 40 20 20 0 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) Operate voltage Release voltage (without diode) Distribution of contact resistance 100 FTR-P6GN012WA n＝100 80 Distribution (%) Distribution of operate/release voltage 100 Distribution (%) Y1 Z2 60 40 20 0 1 2 3 4 5 Time (ms) 6 7 8 0 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) 6 FTR-P6 Series GENERAL INFORMATION 1. ROHS Compliance • All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. • Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 2001/65/EU. • Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for new designs. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf Characteristic data is not guaranteed values, but measured values of samples from production line. • 2. Recommended lead free solder condition • Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. • Recommended solder for assembly: Sn-3.0Ag-0.5Cu. Solder by Soldering Iron: Soldering Iron Temperature: Duration: 30-60W maximum 340-360˚C maximum 3 sec. Reflow Solder Condition: We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity • Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. -DP relay will be shipped in moisture barrier bag. 4. Tin Whiskers • Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 7 FTR-P6 Series Fujitsu Components International Headquarter Offices Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 19F, 12-4, Higashi-shinagawa 4-chome, Shinagawa-ku, Tokyo,140-0002, Japan Tel: (81-3) 3450-1682 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/fcl/ Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components North and South America FUJITSU COMPONENTS AMERICA, INC 2290 North First Street, Suite 212 San Jose, CA 95131, USA Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: us.fujitsu.com/components China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 4306, InterContinental Center 100 Yu Tong Road, Shanghai 200070, China Tel: (86-21) 3253 0998 Fax: (86-21) 3253 0997 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fujitsu.com/uk/components Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD Unit 506, Inter-Continental Plaza No.94 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2881-8495 Tex: (852) 2894-9512 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ Korea FUJITSU COMPONENTS KOREA LIMITED Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82) 31-708-7108 Fax: (82) 31-709-7108 Email: fcal@sg.fujitsu.com www.fujitsu.com/sg/products/devices/components/ ©2017 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. March 16th, 2017 8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2017:03:16 10:19:01+01:00 Creator : Adobe InDesign CC 2017 (Windows) Modify Date : 2017:03:17 07:20:33-07:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:03:17 07:20:33-07:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:4ff37292-b6b5-495d-90a6-cb8499d299f4 Original Document ID : xmp.did:f2b12054-75ff-6348-9852-45bc1cd7ebb5 Document ID : xmp.id:629a3f27-154e-0649-aa5f-11168a663522 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:d15d36d5-4e42-4546-a2f4-3aa2577021f5 Derived From Document ID : xmp.did:2d748568-bcac-0b4e-86fe-f30c139e3f96 Derived From Original Document ID: xmp.did:f2b12054-75ff-6348-9852-45bc1cd7ebb5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:03:16 10:19:01+01:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 8EXIF Metadata provided by EXIF.tools