Fujitsu FTR V1 Series
User Manual: Fujitsu FTR-V1 Series Datasheet - Fujitsu United States
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 210A Battery Latching relay FTR-V1 Series n FEATURES •• •• •• •• •• •• •• •• 1 pole 210A 1 form B relay for 12V car battery Low profile Double winding latching relay 210A (at 85 oC) / 120A (at 125 oC) continuous current Low contact resistance: Max. 0.6mΩ (initial, at 1A) Ambient temperature up to 125 oC) Plastic sealed Plastic material: Conforms to UL94V-0 flammability n Applications Disconnect of battery / capacitor, protection of battery / capacitor, switch of 2 power supplies. n PARTNUMBER INFORMATION [Example] FTR-V1 U C 012 W ST (a) (b) (c) (d) (e) (f) (a) Relay type FTR-V1 : FTR-V1 Series (b) Contact configuration U : 1b (1 form B) (c) Coil type C : Dual coil latching (d) Coil voltage 012 : 12VDC (e) Contact material W : Silver alloy (f) Special type ST : Standard Actual marking does not carry the type name: "FTR" E.g.: Ordering code: FTR-V1UC012W Actual marking: V1UC012W 1 FTR-K1 SERIES FTR-V1 SERIES n SPECIFICATION Item Contact Data Life Coil data Timing Data Insulation FTR-V1 Configuration 1b (1 form B) Material Silver alloy Construction Twin Contact rating Inrush: 230A 14VDC Break:1A 14VDC Contact voltage drop (initial) Max. 0.6mV at 1A 6VDC Contact resistance (initial) Max. 0.6mΩ at 1A 6VDC Continuous current 210A (at 85 degC, cable size 38mm²) 120A (at 125 degC, cable size 38mm²) Max. breaking current 500A 12VDC resistive, 1,000 operations Min. switching load * 6VDC, 1A (reference) Mechanical 200 x 103 operations Electrical 120 x 103 operations (Inrush :230A 14VDC / Break:1A 14VDC) Operating ambient temperature range -40 degC to +125 degC (no frost) Rated power consumption 28.8W (at nominal voltage, at 20 degC) Pulse width 50 to 100ms Set (at nominal voltage, at 20 degC) Max. 10ms (without bounce) Reset (at nominal voltage, at 20 degC) Max. 10ms (without bounce) Resistance (initial) 100M Ω at 500VAC Dielectric withstanding voltage (initial) Other Between open contacts 500VAC(50/60Hz), 1 minute Between coil-contact 500VAC(50/60Hz), 1 minute Misoperation 10 to 200Hz, acceleration 45m/s², constant acceleration (Detection 1ms, set/reset) Endurance 10 to 200Hz, acceleration 45m/s², constant acceleration (Set/reset, up/down 4 hours, left/right 2 hours) Misoperation Min. 100m/s² (11±1ms) (Detection 1ms, set/reset 36 times each) Endurance Min. 1,000m/s² (6±1ms) (Set/reset 36 times total) Vibration resistance Shock resistance Weight Approximately 120 g Sealing Sealed, RT III Note: Values of electrical characteristics are under 15 to 35 degC, 25 to 75%RH, air pressure 86kPa to 106kPa (JIS standard condition) unless otherwise specified. * : Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1 SERIES FTR-V1 SERIES COIL RATING n Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Set / Reset Voltage (V) * 5.4 (20 oC) 012 12 5.8 (85 oC) 5 7.7 (125 oC) Note: All values in the table are valid for 20°C and zero contact current, unless otherwise stated. * Specified operate values are valid for pulse wave voltage. CHARACTERISTIC DATA n Maximum Carrying Current Cable size: 38mm2 Carrying current (A) 210 120 0 0 85 125 Ambient temperature (degC) Distribution of set/reset voltage 60 40 0 1 2 3 4 5 Set / reset voltage (VDC) 6 7 60 40 0 n=50 at 20 degree C rated coil voltage 80 Set time Reset time 60 40 20 20 20 0 100 n=50 at 20 degree C 1A 6VDC 80 Distribution (%) 80 Distribution (%) 100 Set voltage Reset voltage n=50 at 20 degree C Distribution of set/reset time Distribution (%) 100 Distribution of contact voltage drop (contact resistance) 0 0.1 0.2 0.3 0.4 0.5 Contact voltage drop (mV) Contact resistance (mΩ) 0.6 0.7 0 0 1 2 3 4 5 Set / reset time (ms) 6 7 3 FTR-K1 SERIES FTR-V1 SERIES Shock resistance characteristics 600 Half sine half wave pulse Shock application time: 11±1ms 500 Detection level: chatter >1ms Acceleration (m/s2) Shock direction: see below diagram 400 Z1 300 X1 200 Y2 Z2 100 0 Y1 X2 : Set : Reset X1 X2 Y1 Y2 Z1 Z2 Shock Direction • Notes for latching relay Latching relays are shipped in the state set, but state may change due to shock during transportation or mounting. Before using the relays, it is advisable to bring the relays in necessary state (set or reset) and program a circuit sequence. Otherwise, it will or will not operate simultaneously with power activation. • Please connect relay coils according to specified polarity. • Do not apply voltage to both set coil and reset coil at a time. • n DIMENSIONS Tolerance : ±0.3mm unless otherwise specified Unit:mm 4 FTR-K1 SERIES FTR-V1 SERIES l Schematics (BOTTOM VIEW) Circuit Diagram (6) Coil terminal (SET side - ) (5) Coil terminal (RESET side + ) (4) Coil terminal (SET side + ) (3) Coil terminal (RESET side - ) (2) Signal terminal (Moving side) 4 6 5 3 2 1 (1) Signal terminal (Fixed side) Fixed side terminal Moving side terminal Circuit diagram shows set status. Products are shipped in set status (number) : Terminal number, corresponds to numbers on circuit diagram Unit: mm 5 FTR-K1 SERIES FTR-V1 SERIES RoHS Compliance and Lead Free Information 1. General Information l l All automotive relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Profile l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: Duration: maximum 360˚C maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 6 FTR-K1 SERIES FTR-V1 SERIES Fujitsu Components International Headquarter Offices Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 19F, 12-4, Higashi-shinagawa 4-chome, Shinagawa-ku, Tokyo,140-0002, Japan Tel: (81-3) 3450-1682 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/fcl/ Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components North and South America FUJITSU COMPONENTS AMERICA, INC 2290 North First Street, Suite 212 San Jose, CA 95131, USA Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: us.fujitsu.com/components China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 4306, InterContinental Center 100 Yu Tong Road, Shanghai 200070, China Tel: (86-21) 3253 0998 Fax: (86-21) 3253 0997 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fujitsu.com/uk/components Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD Unit 506, Inter-Continental Plaza No.94 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2881-8495 Tex: (852) 2894-9512 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ Korea FUJITSU COMPONENTS KOREA LIMITED Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82) 31-708-7108 Fax: (82) 31-709-7108 Email: fcal@sg.fujitsu.com www.fujitsu.com/sg/products/devices/components/ ©2016 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. July 20th, 2016 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:07:20 09:25:27+02:00 Creator : Adobe InDesign CC 2015 (Windows) Modify Date : 2016:07:21 10:49:51-07:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Instance ID : uuid:4cf9ac64-9a1c-4910-acaf-bbc3305d6bcd Original Document ID : adobe:docid:indd:a5bc7bdb-165a-11df-865d-a1394938b8d2 Document ID : xmp.id:5f43d195-050d-7d4c-ad31-01461d1b7157 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:f11da36c-f002-b34e-9c42-62df8775ade8 Derived From Document ID : xmp.did:2D25F0BD293CE611BB499C03EAB4BB8D Derived From Original Document ID: adobe:docid:indd:a5bc7bdb-165a-11df-865d-a1394938b8d2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:07:20 09:25:27+02:00 Metadata Date : 2016:07:21 10:49:51-07:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 7EXIF Metadata provided by EXIF.tools