Furrion DV12 Car Radio Player with AM FM RDS USB SD DVD CD MP3 WMA ESP AUX ISO BT REMOTE User Manual Manual
Furrion Ltd Car Radio Player with AM FM RDS USB SD DVD CD MP3 WMA ESP AUX ISO BT REMOTE Manual
Furrion >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2016416 |
| Application ID | XlaThHr8sWQ4JnUyTdE0jQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 100.81kB (1260158 bits) |
| Date Submitted | 2013-07-15 00:00:00 |
| Date Available | 2013-07-15 00:00:00 |
| Creation Date | 2013-06-14 23:07:37 |
| Producing Software | Corel PDF Engine Version 14.0.0.701 |
| Document Lastmod | 2013-07-09 17:01:24 |
| Document Title | FURRION DV1200 (DV8000+RDS+USB+HDMI+BT+SUB+ WEATER BAND+ISO-In+Y8)(3'LCD)(SUNPLUS 8203) C1305013.cdr |
| Document Creator | CorelDRAW |
| Document Author: | sally |
DV 1200 DV1200 Instruction Manual 4 IN 1 WALLMOUNT ENTERTAINMENT SYSTEM WITH DVD/CD/USB/BLUETOOTH/AM/FM/WEATHERBAND 30 PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CLASS 1 LASER PRODUCT Laser product symbol: located on the rear panel of the unit, indicate this player is a class laser product, only use weak laser and no hazardous radiation outside of the unit. 1.Read through this instruction manual before installation and use. 2.Do not touch the power plug with wet hand. 3.Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc from the unit/ tray first. 4.Do not open the cover or touch any of the components exposed out of the unit, only for qualified technicians. 5.Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damage the unit. 6.Do not place the unit in moist and humid conditions, which effect the pick-up of the unit lead to out of work. 7.Place the unit on a flat surface and ventilative condition. Please ensure the ventilation holes are not covered to avoid overheating and malfunction. 8.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays. 9.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus . 29 Contents 1. Before Operation...........................................................................................3 1.1 Feature................................................................................................. 3 1.2 Precautions............................................................................................3 1.3 Maintenance and Cleaning of Discs..........................................................4 1.4 Battery Information of the Remote Control.................................................4 1.5 The Remote Control Description...............................................................5 1.6 Locations and Names of the Controls.........................................................6 1.7 Wiring Diagram............................................... ........................................7 1.8 Mouting Installation..................................................................................7 2. Common Operation.......................................................................................8 3. Radio Operation..........................................................................................10 4. Basic Disc, USB Operation...........................................................................12 4.1 Begin Playback......................................................................................12 4.2 Pause Playback.....................................................................................13 4.3 Stop Playback .......................................................................................13 4.4 Select Chapter/Track with the the >>|/|<< Buttons.....................................13 4.5 Select Chapter/Track with the Number Buttons.........................................13 4.6 Select Chapter/Track with the Root/PBC Menu.........................................13 4.7 Terminate the Playback..........................................................................14 5. Advanced Disc, USB Operation....................................................................14 5.1 Playback with Speed..............................................................................14 5.2 Playback with Slow Speed......................................................................14 5.3 Playback with Still Frame ........................................................................15 5.4 Playback Repeatedly.............................................................................15 5.4.1 One/All Repeat...................................................................................15 5.4.2 A-B Repeat.........................................................................................15 5.5 Playback from a specified Chapter/Track or a Specified Time....................16 5.6 Playback in Random..............................................................................16 5.7 Playback in Different Angle.....................................................................16 5.8 Playback in Zoom Mode.........................................................................16 5.9 Change the Caption Language...............................................................17 5.10 Change the Audio Language.................................................................17 5.11 Look over the Playback Status..... ..........................................................17 5.12 Program Playback................... .............................................................18 5.13 Playback the Picture CD in JPEG Format................................................18 5.14 Mp4 OPERATION................................................................................19 5.15 ESP and ID3 Function..........................................................................19 5.16 USB Operation .....................................................................................19 5.17 The DVD System Menu Setup Operation................................................19 5.18 The Parental Control............................................................................23 5.19 The Region Code.................................................................................24 6. Bluetooth Handfree System..........................................................................25 7. The Trouble Shooting...................................................................................27 8. Specification...............................................................................................28 28 1.Before Operation 8. Specification Thank you for purchasing a Furrion Product, we hope you will enjoy using our product. For maximum enjoyment please look through the following manual to learn about all the features of your Furrion Stereo. General Specification 1.1 Features: Power Supply Requirement..................................................DC 12V Maximum Power Output...................6 x 25W(measured at DC 14.4 V) Maximum Sub woofer Power Output.....................................1 x 50W Dimensions(w x h x d)...........................................281 x 173 x 175mm Digital AM / FM Tuner with Weather band (WB) DVD/CD-R/RW/MP3/MP4/WMA Compatible Auxiliary inputs on front and rear USB input with charging function* 3 Zone output with built in Subwoofer output in Zone A Backlit controls with Sleep Tight light function Clock/Alarm Clock 1 x HDMI output for HD viewing 2 x RCA Audio/Video outputs for connecting 2 additional Tv’s Coaxial and Optical Audio input connections on the rear of the unit *not all products can be charged from the unit. DVD Deck Specification Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional) Audio System..............................................................24 bit/96KHz Loading System.......................................................... Auto Loading Mounting Angle.................................................................0 to +/-30 Video Specification Video Type...................................................................16:9 and 4:3 Video Output level......................................Composite:1.0± 0.2Vp-p Load impedance: 75 ohms Horizontal Resolution................................................................600 1.2 Precautions Audio Specification Ensure to connect this product to a 12V DC negative ground battery system which is standard in North America and European Vehicles. Ensure when installing the Stereo all wire ends which are not being used are terminated with a insulated end to avoid wires shorting or earthing which can lead to the risk of fire or electrical shock. Avoid inserting foreign objects into the disk loading slot of the Stereo as this will cause malfunction. Do not expose this product in moist or wet environments, if condensation is present in the screen, wait for 1 hour or more for the moisture to evaporate If the interior of the vehicle is extremely hot, do not use the player until the vehicle internal temperature has cooled down. Do not use cleaning products on the front face of the product, only use a slightly damp cloth for cleaning. Do Not attempt to disassemble or adjust this product, contact a service cente for assistance Audio Output(Analog audio)..........................................2.0 +0 -1.0 Vrms Frequency Response.............................20Hz ~ 20KHz(at 1KHz 0 dB) S/N Ratio(Audio).............................................≥90dB(at 1KHz 0 dB) Radio Specification FM Section Frequency range...........................................87.5MHz - 107.9MHz(US) 87.5MHz -108.0MHz(EU) Usable sensitivity......................................................................3uV I.F Frequency....................................................................10.7MHz AM Section Frequency.......................................................530KHz - 1710KHz(US) 522KHz - 1620KHz(EU) 27 7. The Trouble Shooting Please read the user s manual carefully before using the DVD player. If you have any problems with this product please refer to the bellow Trouble shooting guide to help you resolve the issue. NO PICTURE, SOUND AND INDICATION * Ensure that the power switch is on. * Ensure that the wall inlet is ok. * Ensure that the power cord is not damaged or the fuse is not blown. * Ensure that the power plug is connected to the inlet tightly. NO SOUND BUT PICTURE OK * Ensure that the player s audio output has a good connection with TV s audio input. * Check whether the audio connector is damaged. * Check whether you have turned down the volume. * Ensure that you have set the right AUDIO setup of the player. * Ensure that the audio is not under mute. NO PICTURE BUT SOUND OK * Ensure that the player s video output has a good connection with TV s video input. * Ensure that you have turned your TV to the AV input channel connecting to your player. * Check whether the video connector is damaged. * Ensure that you have set the right VIDEO settings of the player. 1.3 Maintenance and Cleaning of Discs Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using. 3. Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature. 4. Put the disc inside disc case to keep temperature after finishing playback. Disc Cleaning 1. Before playing, wipe the disc with a clean lint. wipe the disc outwards from the disc center. 2. Do not use petrol, thinners, commercially available cleaners or anti-static sprays for plastic LP's to wipe discs. BLACK AND WHITE PICTURE OR SCREEN ROLLING * Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting. + side up FLAWS OF PICTURE OR SOUND * Check whether the setting of AUDIO is right. * Check whether the disc is scratched or stained. * Check whether the AV connector and the output terminal is stained. * Check whether there is condensation inside the Lens. If so, leave the player off for an hour or so, then try again. * Check whether the installation angle is less than 30. DISPLAY NO DISC OR BAD DISC * Ensure that you have put the disc on the tray. * Check whether the disc is put in the reverse side. * Check whether the disc is distorted. * Check whether the disc is stained or scratched badly. * Ensure that the disc format is compatible to the player. * Ensure that the temperature inside the car is not too high. If so, cool off until the ambient temperature returns to normal. * Replace another disc to insert it into the disc compartment. REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK * Check the batteries of remote control and make sure that they are not flat. * Direct the remote control to the IR sensor of the player. * Check whether there are some obstacles between the remote control and IR sensor. SOME FUNCTION BUTTONS DO NOT WORK * Turn off the power, then turn on again. * Reset the unit to zero, then turn on again. * Remove the front panel from the unit, then install it again and then turn on again. THE RADIO DOES NOT WORK * Check whether the antenna cable is connected firmly. Or manually tune for a station. Fig.1 Fig.2 Fig.3 1.4 Battery Information of the Remote Control Replace Battery in the Remote Control: 1.Before using the remote control for the first time, pull the insulating sheet out of the remote control as the direction indicated by the arrow.(see fig.1) 2.Press the movable block hold as the direction indicated by the A arrow (See fig.2), then pull the battery holder out of the remote control as the direction indicated by the B arrow(see fig.2). 3.Replace the old battery by a new battery with (+) polarity side upward. (See fig.3). 4.Insert the battery holder to the original position in remote control. (See fig.3). Note about the Battery of the Remote Control: 1.Improper use of battery may cause overheating or explosion. so that Result in injury or fire . 2.Battery leakage may cause damage to the remote control(Battery Life: 6 months with normal use in normal room temperature). 3.Do not short the battery. 4.Do not throw the battery into the fire. 5.To avoid the risk of accident, keep the battery out of reach of children. 26 1.5 The Remote Control Description 27 35 1. AV IN BUTTON 2. OPTICAL BUTTON 14 29 32 34 13 31 30 33 10 11 40 3. POWER BUTTON 4. ^ BUTTON 4.3 To redial the last phone number dialled (1) Short press TEL button ,it will show last phone number on LCD, then it will execute the dialling (2) Short press REDIAL button, It will dial the last phone number. 5. >>| BUTTON 6. > BUTTON 5. Accept/Reject/End Call 7. |<|| PLAY/PAUSE BUTTON 27.EQ BUTTON 28.STOP BUTTON 29. DISC SLOT 30. SUBWOORER VOLUME ADJUSTER 10 11 12 15 1. POWER BUTTON 2. DVD/USB MODE BUTTON 3. AM/FM MODE BUTTON 4. AUX MODE BUTTON 5. BT MODE /BACKLIGHT BUTTON 6. 1/2/3 BUTTON 7. 4/RPT BUTTON 8. 5/RDM BUTTON 9. 6/TITLE BUTTON 10. USB SOCKET 11. AV IN SOCKET 12. HEADPHONE SOCKET 13.MICROPHONE 14.RESET BUTTON 15. EJECT BUTTON 16. HANG UP/ST BUTTON 17. ALARM ON OFF BUTTON 18. SLEEP SET BUTTON 19. TEL /LOC BUTTON 20. >>|/|<< KNOB 21. VOL KNOB/SEL BUTTON 22. INDICATOR LIGHT 24 1.7 Wiring Diagram 5.19 The Region Code Q: No DVD playback. Screen displays REGION ERROR after inserting disc into disc compartment. Why ? A: Because the DVD player and disc have different region codes. If they do not match, the DVD player cannot play the disc. Appendix: The region code of DVD: The Motion Picture Association of Amereca (MPAA) divided the world into 6 regions, and named every region a code, namely region code. The region codes and the countries or areas represented by the region codes are as follows: Region 1: America, Canada, East-Pacific Inlands; Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East; Region 3: South-east Asian countries include Taiwan, Hong Kong, South Corea, Thailand, indonesia, etc.; Region 4: Australia, New Zealand, Central South America, South Pacific Inlands; Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North Corea, North Africa, North-west Asia etc.; Region 6: China mainland. 1.8 Mounting Installation Choose a mounting location away from humid areas, water sources, appliances or any equipment that can radiate heat. Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure the area behind the wall mount stereo has a vent hole or if it is an enclosed box and has adaquate room around the rear of the unit for cooling. Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed against the heat sink. Where possible leave around 1 to 2 inches of space inside the cabinet around the sides and rear of the stereo housing tohelp with airow and ventilation. PLASTIC FRAME 8 23 2. Common Operation 5.18 The Parental Control 1.Turning On and Off the unit By pressing the power button will turn on or enter standby mode Q:After inserting DVD disc into disc compartment, a dialogue window will appear asking for a password of 4 digits. Why ? A:This is because that the disc movie you are playing was rated with the Parental Control, and the current rating level of DVD player is lower than one of current disc. You must input right password and enter it to entry Parental Control setup menu and then set a equal or higher rating level than one of current disc. So that you can playback the disc. ! NOTE * If you have not changed the password, the factory preset password for the DVD player will be empty. So that you should input a desired password and input it again to verify it to enter the Parental Control setup menu. * For the rating level setup of Parental Control of the DVD player, please refer to the relative content of LOCK setup menu for details. Sleep Tight function By holding the power button for 5 seconds while the unit is in standby mode will enable Sleep Tight mode, this is were all illumination on the front panel will turn off on the unit. 2.Selecting a Source: DVD / USB - once a DVD or USB is inserted into the unit, the unit will automatically switch to display this source menu. Press this function button to select DVD if a disk is already installed and the unit is playing from another source. AM/FM/WB - by pressing this button will scroll through the FM1, FM2, FM3, AM1, AM2, WB (weather band). To switch this units AM/FM reciever between USA and Europe frequencies press and hold the AM/FM button for 10 seconds untill the region is displayed on the screen. AUX-this button allows you to scroll through the AUX inputs fitted to the strereo COAXIAL input - connection on the rear of the stereo AUX input - connection on the rear of the unit, (normally used to connect TV sound input) AV IN - connection on front of unit to connect a external audio source OPTICAL - connection is on the rear of the unit BLUETOOTH / DIMMER - by pressing this button will enable bluetooth connection, if the button is held in forover 2 seconds it will then dim the face illumination by 1 of the 3 stages each time pressed. Accessories: Parental Control The Parental Control function of a DVD player can control the playback of movie rated level in a disc. Can set the DVD player(include software player in PC) to be a certain rating level with SETUP MENU on TV screen.If the rating level set in the disc is higher than one set in the DVD player, the DVD player can not playback the disc. Sometimes the Parental Control sequences in some discs are different from each other. The rating level setup can be protected by the password. Therein, if you select Unlock item, the Parental Control function will be invalid, the content of disc will be played totally. The disc movie can be designed as that the DVD player will playback the different version of content of a same movie according to the different rating level set by Parental Control. Depend on the DVD feature of seamless switching described above, the scenes that are not fitting for children will be cleared or replaced by the other fitting scene automatically. All rating levels of Parental Control are as follows: Unlock Kid Safe PG PG 13 PG R NC 17 Adult 3.Volume Adjust Rotate the volume knob clockwise to increase volume, rotate anticlockwise to reduce volume. 4. Mute Press MUTE button to mute what ever source is playing and display mute on the screen. Press the mute button again to release unit from mute. 5. Clock and Alarm Set 1) To display the clock on the LCD display, press Clock botton on the remote control 2) To Adjust or set the clock, press and hold the Clock Set button on the front of the unit or hold the Clock button on the remote control until the clock set feature is displayed on the LCD display of the stereo then use the volume knob on the unit or + and - buttons on the remote control to adjust the time, push in the volume knob on the stereo or press the SEL button on the remote control to change from setting hours to minutes. Once time is set the stereo will automatically set after a few second of not pressing any functions. 3) To set the Alarm Clock the Stereo must be in AM/FM mode when the Alarm Set buttois held in. The alarm clock is set in the same way as above for the clock set. Once the alarm clock is set, you will see the ALARM light illuminated under the LCD display. Press the alarm on /off button to turn on or cancel the alarm setting. 9 22 6. To select a preset EQ mode Press the EQ button to select the preset music equalizer curves: MOVIE, MUSIC, CLASSIC, CONCERT .The sound effect will be changed. 7. To turn on/off LOUD mode Press and hold LOUD button on the front panel to turn on/off LOUD mode. 8.To adjust the sound equalizer curves To adjust the sound equalizer curves, briefly and repeatedly press the SEL button to select the sound equalizer curves of VOL, BAS(without preset EQ), TRE (without preset EQ), BAL, FAD,BEEP(ON/OFF), then rotate the VOL knob on the front panel or press the + or - button to adjust level. 9.To preset the unit to sleep mode Press the SLEEP SET button to select the time you want to make the unit go sleep mode in. There are four modes for select. 00: The sleep mode off 15: The NDICATOR light SLEEP will be lighted, The unit will go to sleep mode in 15 minutes 30: The INDICATOR light SLEEP will be lighted, The unit will go to sleep mode in 30 minutes 60: The INDICATOR light SLEEP will be lighted, The unit will go to sleep mode in 60 minutes NOTE: Only the ALARM ON mode is selected, the above preset function can effect. 10.To preset the unit from sleep mode to turning on Press and hold the SLEEP SET to pop up the preset clock interface. adjust the time you want the unit to turn on in. CONTRAST It is for adjusting the contrast of the video output HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 5.17.5 SPEAKER SETUP DOWNMIX It is for selecting your desired sound effect when there is no center speaker and subwoofer. There are 3 modes: LT/RT, STEREO, VSS. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal with 5.1 channels, it will output the left and right channels of signal ; when outputting audio signal with 2 channels, it will output the common 2 channels of stereo signal. VSS: If you choose the item, when playing a disc recorded with 5.1 channels, the main channel speakers can output audio signal with VSS effect. 5.l7.6 OUTPUT SETUP NOTE: Only the ALARM ON mode is selected, the above preset function can effect. 11.ALARM ON OFF BUTTON Press the ALARM ON OFF BUTTON to select the ALARM ON or ALARM OFF mode. ALARM ON: The INDICATOR light ALARM will be on. ALARM OFF:The INDICATOR light ALARM will be off. 12. SPEAKER SELECTION BUTTON Press the SPEAKER SELECTION BUTTON A/ B/C to select the speaker. If the speakers are selected the light of the INDICATOR light will be turn on. 13.ADJUST THE BACKLIGHT BRIGHTNESS Long press the BACKLIGHT button to adjust the backlight brightness. 14.To reset the unit when the display is incorrect, or the function buttons are not effective or sound is distorted, then use a sharp point to press the RESET button, that will make the unit be reset to factory default and re-instate the correct functions . DYNAMIC RANGE After selecting the compression mode of LINE OUT, set the item, so you can adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak value of the audio signal is the minimum; if you set it to be OFF, the Peak-toPeak value is the maximum. DUAL MONO It is for selecting a desired audio output mode for the left and right ways of signal. It is mainly for Karaoke of Ac3. There are 4 modes in all as follows: STEREO, MONO L, MONO R, MIX MONO. 21 10 5.17.2 LANGUAGE SETUP OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback. AUDIO LANG This item is for selecting a audio language. SUBTITLE LANG This item is for selecting a subtitle language. MENU LANG This item is for selecting a disc menu language. 5.l7.3 AUDIO SETUP 3. Radio Operation 1. FREQUENCY SELECT In RADIO mode. Press and hold the AM/FM button to select your desired frequency EUROPE ,USA1 or USA2. 2. AM/FM BUTTON In RADIO mode, press the AM/FM WB button on the remote control or AM/FM button on the front panel to select your desired radio band of FM1, FM2, FM3, AM1, AM2 and WB, and the selected band will be displayed on the small monitor of the front panel. Note: In weather band (WB) mode,press number button from 1 to 7 to select your desired station. 3. TUNE/SEEK UP/DOWN In RADIO mode: 1) Rotate the TUN/TRK KNOB to the right or left limit position stopping for about 1 second or Press and hold the >>|/ |<< button on the remote control to automatically search up/down for a available station from the current frequency. 2) Rotate the TUN/TRK KNOB or the press the >>| / |<< button on the remote control to manually search up or down with step by step for your desired station from the current frequency. 4. AS/PS BUTTON In RADIO mode: 1) When pressing and holding the AS/PS button on the front panel or APS button on the remote control, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in each bank of the selected band. When the AS operation is finished, it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all) 2) When briefly pressing the AS/PS button on the front panel or APS button on the remote control, the radio searches for each preset station from the M1. When the field strength level is more than the threshold level of the stop level, the radio holds at that preset number for a few seconds with releasing mute, and then searches again. After finishing a circle of searching, it will stop searching on the M1. NOTE: In FM band, FM1,FM2,FM3 is checked one at a time. In AM band, AM1, AM2 is checked one at a time. AUDIO OUT there is only ANALOG mode, i.e. SPDIF/OFF, not optional. KEY It is for selecting your desired basic music tone(from low to high). 5.17.4 VIDEO SETUP 5. PRESET STATION [ 1-6 ] BUTTONS In RADIO mode: 1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons (1-6) . 2) To recall the preset memory on the current band, press one of the preset buttons [1-6] . 6. STEREO/MONO BUTTON Press the ST button to select the STEREO or MONO sound mode in FM mode. BRIGHTNESS It is for adjusting the brightness of the video output. 7. LOC BUTTON 1) In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, check whether there is the word LOC on LCD. If there is the word LOC on LCD, press this button to turn off the LOC function, then tune again for the distance radio station; 2) In RADIO mode, when the signals from the local radio stations are too strong, this could lead to interference. press this button to turn on the LOC function, and the LOC icon will be lit up on the LCD. Re-tune for the local station required. 11 8. PTY (PROGRAM TYPE) BUTTON Long press the SEL button on the front panel or p ress the PTY button on remote shortly to select one of the following mode. When PTY group is on, press the VOL+ or VOL- button on the remote controller or rotate the VOL knob on the front panel to select one of PTY programs: <-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE <-->DRAMA<-->CULTURE <-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE<-->CHILDREN<-->SOCIAL<-->RELIGION<-->PHONE IN<--> TRAVEL<-->LEISURE<-->DOCUMENT< -->PTY NONE<-->POP M< --> ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M<--> JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<--> When PTY group is on, pressing the 6 number buttons also can select one of PTY programs as above. After selecting one of the PTY programs, it will display SEEK PTY and automatically search for the station of the PTY program. If the station of the PTY program does not exist, it will display PTY NONE and then return back to the normal station. Note: Press and hold the SPEAKER SELECTION BUTTON B on the front panel for 5 seconds can turn on/off RDS mode. 9. AF [ALTERNATIVE FREQUENCIES] BUTTON Long press the SEL button on the front panel or press the AF button on the remot control briefly, the AF switchingmode is selected and the state of the AF switching mode is displayed by AF segment. Segment off: AF switching mode off. Segment on: AF switching mode on, and has RDS information. Segment flashing: AF switching mode on, but RDS information is not received yet. When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong station to a few seconds for the weak station. Every time that a new AF is stronger than the current station, it switches over to that frequency for very short time, and the NEW FREQUENCY is displayed for 1-2 second. Because the mute time of the AF switching or the checking time is very short, it is almost inaudible in case of normal program. (When AF flash on LCD, it will search for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic announcement station). In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save the RDS program. 10. TA [TRAFFIC ANNOUNCEMENT] BUTTON Long press SEL button on the front panel then rotate it or press the TA button on remote shortly to turn on/off TA search mode. When traffic announcement is transmitted: 1).If the unit is in Disc Play mode, it will switch to radio mode temporarily. 2).Temporarily switch over to an EON linked station when EON detects a traffic announcement on that other program, and TA, TP will be displayed on LCD * TA interruption function: The current traffic announcement is cancelled by pressing TA button shortly. * When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program identification code has been received. 20 For the DVD System Menu, there are 6 setup pages in all. They display as follows: 5 .17.1 SYSTEM SETUP TV SYSTEM This product supports output of various TV system. If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong TV system is selected. In this case, press the direction button to switch the right TV system to match the TV color system. RESOLUTION The setup item is for setting the resolution in TV mod e TV TYPE The setup item is for matching TV screen size. 4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the left and right parts of the video will be cut out, and display in full screen. 4:3 LB: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the top and bottom parts of the TV screen will be turned into a black square respectively. 16:9: Choose the item when connecting a TV set with 16:9 wide screen. PASSWORD This setup item is for locking or unlocking the rating level of the Parental Control. The defaulted state is locked. The defaulted password is 0000. You can set a new password that you like: Select the PASSWORD item and then press the > button to enter it, then input the original password 0000, and then press the OK button to unlock it. Press the > button to enter it again, then input a new password that you like and then press the OK button to make it effective. Before the other persons see the Manual, you should get the password in mind and cut out the part of PASSWORD in the Manual. RATING The item is for setting a new rating level of the Parental Control. 1. Select the PASSWORD item and then press the > button to enter it, then input the password mentioned above, and then press the OK button to unlock the setting of the rating level of the Parental Control. 2. Select the RATING item and then press the > button to enter it, then use the direction buttons to select your desired rating level, then press the OK button to confirm. 3. Select the PASSWORD item again and then press the > button to enter it, then input the password, and then press the OK button to lock the new setting of the rating level of the Parental Control. DEFAULT This item is for making all setup items change back to original status. 19 12 3. During JPEG playback, press one of the >/: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu. * During JPEG playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, STEP, AUDIO, RDM, INT and A-B. * In JPEG mode,the other operations are same as ones in MP3/WMA mode. 5.14 MP4 Operation 1. The root menu is displayed on TV when beginning to switch on DISC mode, then it will automatically play the first file. During playback, press the STOP button to stop playing and return to the root menu. 2. When displaying the root menu, press the direction buttons to select your desired FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the selected file. When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file. * The ANGLE, PROG, RDM and TITLE/PBC button are not valid. * The other functions are same as ones in DVD disc; but the RPT function is same as one in MP3/WMA. 5.15 ESP and ID3 Function There is ESP function for all formats of discs. In MP3/WMA mode, during playback, the information of the file name, folder name, song s title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not. 5.16 USB Operation Power on the DVD player, then insert the USB storage, then the monitor will display the root menu of the USB storage. This device support picture(JPG format),audio(MP3 or WMA format) and Video(MP4 format), all the operations are same as ones of the corresponding format. Note:The USB input with charging function ( not all products can be charged from the unit) 5.17 The DVD System Menu Setup Operation 1. Press the SETUP button on the remote controller to access the DVD System Menu on the monitor. 2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. * Press the < button to return to the upper level. * Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu. 4.Disc, USB Operation 4.1 Begin playback 1. Press the POWER button briefly to turn on the DVD player. After turning on the DVD player, please turn on the monitor, and ensure that the video output of the monitor is the video input from the DVD player connected with the monitor. ? Common Question Q: There is not anything is displayed on TV screen when the DVD player is turned on. How to solve the problem? A: Ensure that the TV was set to right video input(not TV channel); for example, if you make VIDEO1 INPUT of TV and DVD player connected with each other, then you need set TV to VIDEO1. 2. Insert a disc into the DISC SLOT(Label surface up). ! NOTE 1. For some discs that are seriously scratched or poor manufacturing or recording quality, it may not play. 2. If the player can not read disc under normal condition, please try to eject and reload the disc again. 3. Remark: 1) In addition to normal CD and DVD, this unit supports to play CD-R, CD-R/W, DVD-R and DVD-R/W as well; however, depending on the conditions of the recording equipment, recording program or the disc itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play. 2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording, too high recording speed may result in poor signal quality and therefore, it is recommendable to select as lower as possible recording speed. 18 13 5.12 Program Playback 4.2 Pause Playback When playing DVD/VCD/CD/MP4/MP3/WMA discs, press the PAUSE/PLAY button on the front panel or remote control to pause the playback, press the PAUSE/PLAY button again to resume normal playback. It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD disc to play. 1 During playback, press the PROG button to enter a program interface as follows: for DVD discs for VCD/MP3/WMA/CD discs 4.3 Stop Playback When playing DVD/VCD/MP3/WMA/CD discs, press the STOP button once to pause the playback, then press the PLAY button to resume the normal playback; press the STOP button twice to stop the playback, then press the PLAY button to start playback from the beginning of the first chapter/track. 4.4 Select Chapter/Track with the TUN/TRK KNOB or the >>| / |<< Button Rotate the TUN/TRK KNOB on the front panel or the >>| / |<< button on the remote control during playback to select the next or last chapter/track to playback. Note: Rotate the TUN/TRK KNOB or press the >>|/|<< button multiple times to advance multiple chapters/tracks forward or backward. 4.5 Select Chapter/Track with the Number Buttons When playing DVD/VCD(PBC OFF)/MP3/WMA/CD discs, press one of the 1~9 and the 0/10 number buttons to directly select and play the 1st to 10th track / chapter (the 0/10 button is used as the 10 button). If you want to play the track/chapter with serial number bigger than 10, use the 10+, 1~9 and 0/TA button. For example 1, to play the 13th track/ chapter, firstly press the 10+ button once, then press the 3 button. For example 2, to play the 34th track/chapter, firstly press the 10+ button for 3 times, then press the 4 button.(the 0/TA button is used as the 0 button) Note: pressing and holding the +10 or -10 buttons will allow you to play the next 10 or last 10 chapter/track(only for MP3/WMA). 4.6 Select Chapter/Track with the Root/PBC Menu (If the disc includes the root/PBC menu) 1. 2. 3. When playing DVD discs: Press the TITLE button on the remote control to display the title list. Press the direction buttons to select your desired title, and then press the OK or PLAY button to open the root menu of the selected title. Press the direction buttons to select your desired chapter, finally press the OK or PLAY button to play the selected chapter. During playback,pressing the TITLE button on front panel or long press the TITLE button on the remote can directly displaythe root menu of the title that is playing. 2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number. 3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence. 4 Use the direction button to move cursor onto Play item, then press the OK button to play the programmed titles/chapters/tracks in programmed order; only pressing the PLAY button also can play the programmed titles/chapters /tracks in programmed order. * To exit program playback, firstly press the STOP button, then press the PLAY button to enter sequence playback; or press the PROG button twice again. * To remove the all programmed sequence numbers, move the cursor onto Clear item, then press the OK button. * To change the programmed sequence, move the cursor onto the item you want to change, input the desired sequence number. * During VCD playback, if it is in PBC ON mode, at the same time of entering the state of program playback, it turns off PBC mode. 5.13 Playback the Picture CD in JPEG Format 1. The root menu is displayed on the monitor when beginning to switch on DISC mode. At the time, it plays MP3/WMA file.(the TITLE or MENU button is not available). In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3 file sort does not exist, you can not move cursor onto the file sort icon. 2. When displaying the root menu, press the direction buttons to select your desired FOLDER, file or file sort icon, then press the OK or PLAY button to open the FOLDER, or play the selected file, or play only this sort of file. When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file. When you select a JPEG file sort icon, press the ^ or > button to select the first JPEG file, then press the v button to select the desired JPEG file, finally press the OK or PLAY/PAUSE button to display the JPEG picture in full screen from the selected JPEG picture. 14 17 ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. 5.9 Change the Caption Language When playing DVD discs, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the disc used.) When playing VCD/MP3/WMA/CD discs, the button is not available. 5.10 Change the Audio Language 1. When playing DVD discs, press the AUDIO button repeatedly on the IR remote control to select the desired language type(depend on the disc used) 2. When playing VCD discs, press the AUDIO button repeatedly to select the sound mode of the MONO L, MONO R, and Stereo, no language function. 3. When playing CD/WMA/MP3 discs, the AUDIO button is invalid. In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on TV screen if the disc include the PBC menu. 2. Press the number buttons to select your desired track to play. In MP3/WMA mode 1. The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available). 2. Press the direction buttons to select your desired FOLDER, then press the OK or PLAY button to open the FOLDER, and then press the direction buttons to select your desired file, finally press the OK button to play the selected file. In CD mode, the TITLE, PBC, MENU buttons are disabled. 4.7 Terminate the Playback 1. Press the EJECT button to eject disc. 2. Press and hold the POWER button on the front panel or briefly press the POWER button on the remote controller to turn off the DVD player. 5.11 Look over the Playback Status 1. When playing DVD discs, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing title, the serial number of the playing chapter, the elapsed time of the playing chapter, the remaining time of the playing chapter, the elapsed time of the playing title, the remaining time of the playing title, etc. 2. When playing VCD/CD discs, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remaining time of the playing track, the elapsted time of the disc, the remaining time of the disc. 3. When playing MP3/WMA discs , press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remaining time of the playing track. 5. Advanced Disc, USB Operation 5.1 Playback with Speed During normal playback, Rotate the TUN/TRK to the right or left limit position stopping for about 1 second or press and hold the >>|/|<< button on the remote controller continuously to fast forwards or backwards at the following speeds: x2, x4, x8,x16, x20, normal. During speed playback, press the PLAY button to resume normal playback. 5.2 Playback with Slow Speed During playback , press the SLOW_FWD button to execute the Slow Forward function. With each consecutive pressing of the SLOW_FWD button, the playback speed decreases. The speed levels in Slow Forward as follows: x1/2,,x1/3,x1/4,x1/5,x1/6,1/7,normal. 16 15 During slow forward, press the PLAY button to resume normal playback. The function is only for video. 5.3. Playback with still frame If the unit is currently running DVD.VCD disc,press the STEP button consecutively to display the still frame forward with step by step. Press the PLAY button to resume normal playback. 5.4 Playback Repeatedly 5.4.1 ONE/ALL Repeat 1. In the mode of DVD disc playback: Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF. 2. In the mode of VCD(PBC OFF)/CD disc playback: press the RPT button to select REP ONE, REP ALL or OFF. When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available. 3. In the mode of MP3/WMA disc playback: Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF. 5.5 Playback from a specified chapter/track or a specified time 1. When playing DVD discs, press the SEARCH button to display a interface and highlight the title item, then use the number buttons to input the serial number of the title; use the direction buttons to highlight the chapter item, then use the number buttons to input the serial number of the chapter; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the OK or PLAY button to play the selected chapter or play from the selected time. 2. When playing VCD/MP3/WMA/CD discs, press the SEARCH button to display a interface and highlight the track item, then use the number buttons to input the serial number of the track; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the OK or PLAY button to play the selected track or play from the selected time. 5.6 Playback in Random When playing DVD/VCD(PBC OFF)/MP3/WMA/CD discs, press the RDM button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode, it will play in random. 5.7 Playback in Different Angle 5.4.2 A-B Repeat Press the A-B button if you want to repeat a specific segment on a disc that you define: 1. 2. Press the A-B button at a point (A) where you want it to be the start point of the repeat segment. Press the A-B button again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly. To cancel the A-B repeat mode and resume normal playback, press the A-B button for the third time. Note: During VCD/MP3/WMA/CD playback, points A and B must be within the same track. During DVD playback, points A and B can be selected from different chapters. 1. When playing VCD/MP3/WMA/CD discs, the ANGLE button on the IR remote control is not available. 2. When playing DVD discs, press the ANGLE button repeatedly on the IR remote control to view in different angle.(This function is only for the DVD discs with ANGLE function) 5.8 Playback in Zoom Mode In DVD/VCD mode, during playback, press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples: FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : sally Title : FURRION DV1200 (DV8000+RDS+USB+HDMI+BT+SUB+ WEATER BAND+ISO-In+Y8)(3'LCD)(SUNPLUS 8203) C1305013.cdr Create Date : 2013:06:14 23:07:37+08:00 Creator Tool : CorelDRAW Modify Date : 2013:07:09 17:01:24+08:00 Metadata Date : 2013:07:09 17:01:24+08:00 Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:2d8f2f9d-63e2-4cdb-9860-d58800487a96 Instance ID : uuid:6f0c907e-537b-42e8-a725-7487278d2246 Page Count : 17 Author : sallyEXIF Metadata provided by EXIF.tools