Furrion DV30XX Entertainment System User Manual 1

Furrion Ltd. Entertainment System 1

15_DV3010 UserMan,r1

Entertainment SystemTOP I NT RPT RDMMODEAPSSCAN CLOCK AFSELBAND PTY TACALLLOG
Locations and Names of the Controls9.AUX IN SOCKET10.HEADPHONE SOCKET11. USB SOCKET12.BT MODE BUTTON/EQ BUTTON13.MICROPHONE IN14.RESET BUTTON15.INPUT MODE BUTTON/BAND BUTTON16.5/RANDOM BUTTON17.VOL KNOB/SEL BUTTON18.6 BUTTON19.4/REPEAT BUTTON20.LCD DISPLAY78910 11 14 15 16 1718243519RESET1 2 3RPT4 RDM5 6VOLUM EAUX USB12 1312061. NFC DETECTION AREA2. IR REMOTE CONTROL SENSOR3. 1/2/3 BUTTON 1 TEL /REDIAL BUTTON 2 HANG UP BUTTON4.ZONE 1/2 BUTTON5. 6.PLAY/PAUSE BUTTON RADIO REGION SELECT BUTTON7.POWER BUTTON8.STOP BUTTON AS/PS BUTTON/ BUTTONPAGE 1
1TOP I NT RP T RDMMODEAPSSCAN CL OCK AFSELBAND PT Y TACALLLOGThe remote control description1.Power button2.APS button3.SCAN button4.CLOCK button5.BAND button6.MODE button7.NUMBER buttons(0~9) 1/PAUSE/PLAY button 2/ INT button 3/RPT button 4/RDM button8. button9. MUTE button10. T-M button11.TEL button12. HANG UP/CLEAR button13. button14.TA button15.PTY button16.- button17.AF button18.UP button19.SEL button20.+ button21.DOWN buttonCommon operation:1. To turn the unit on/off . When the unit is power Off, it may be switched On by pressing POWER button.When the unit is switched On, press and hold POWER button for more than 1 second to switch the power off. 2. To select function mode Press INPUT MODE button on the front panel repeatedly to select Tuner,USB(After inserting a USB storage),BT, F AUX,AV and R AUX mode. 3. To adjust the volume level Rotate the VOL KNOB on the front panel or press the + or - button on the remote control to adjust volume level during playback. 4. Volume Adjust Rotate VOL KNOB clockwise to increase to increase volume,rotate anticlockwise to reduce volume. PAGE 221 2023456789121314151716181910 11
5. To mute or resume sound Press MUTE button on the remote control to eliminate or resume sound immediately during playback. 6. To select and adjust the mode of the sound and menu Press SEL button repeatedly to select the mode of AF ON/AF OFF mode ,TA ON/TA OFF PTY NEWS/PTY MUSICS,NEWS/POP M,BASS,TRE(treble), LIR(balance), LOUD OFF/LOUD ON, VOL LAST/VOL DEFA, BEEP ON/BEEP OFF,DX/LOCAL (in RADIO mode),STEREO/MONO(in RADIO mode),SUBW ON /SUBW OFF,CLK XX XX, in the sequence and circulation. In each item, rotate the VOL KNOB to select your desired mode.1) VOL LAST/VOL DEFA VOL LAST: The volume level when switching off will be restored with power On. VOL DEFA: The volume level of the main unit after power on is a constant value. When selecting VOL DEFA item, press SEL button to display AVOL , then you can pre-set the constant volume level after power on with VOL control.2) BEEP ON/BEEP OFF BEEP ON mode: The beep is generated when any key is pressed. BEEP OFF mode: The beep sound is disabled.3) DX/LOCAL Radio station search mode is divided by this DX/LOCAL switch, which can be used to control an attenuator in the tuner during search. The detecting level of seek, scan, auto-memory will be reduced as much as the attenuated level of the tuner. In radio mode, press the LOC button to change local reception or distance reception. (Note: This button is only for FM reception. In AM mode, LOC is invalid.)4) CLK XX XX When select CLK XX XX mode, Rotate the VOL KNOB to adjust HOUR, press SEL button for confirmation. With the same means to adjust MINUTE.7.To select a preset EQ mode Press and hold BT button on the front panel to select the preset music equalizer curves: FLAT,CLASSIC,ROCK,CINEMA,EQ OFF. The sound effect will be changed.8..ZONE 1/2 Button Pressing ZONE 1 or 2 button will turn on or off the audio source in each of the different areas which your speakers are connected. “ZONE <1>” or “ZONE <2>” will display on the LCD once it is selected. 9. To reset unit When the display is incorrect, or the function buttons are not effective or sound is distorted, then use a sharp point to press RESET button, that will make the unit be reset to factory default and re-instate the correct functions.PAGE 3
Radio Operation1. FREQUENCY SELECT In RADIO mode. Press and hold PLAY/PAUSE button for about 5 seconds to select your desired frequency EUROPE,USA1,USA2 or AUSTRALIA.2. AM/FM BUTTON In RADIO mode, press and hold INPUT MODE button on the front panel or briefly press BND button on the remote control to select your desired radio band of FM1, FM2, FM3, AM1, AM2 , and the selected band will be displayed on the LCD of the front panel.3. TUNE/SEEK UP/DOWN In RADIO mode: 1) Press and hold or button on the front panel or Press and hold / button on the remote control to automatically search down/up for a available station from the current frequency. 2) Press or button on the front panel or press / button on the remote control to manually search up or down with step by step for your desired station from the current frequency. 4. APS BUTTON & SCAN BUTTON In RADIO mode: 1) When pressing and holding APS button on the remote control or press and hold button on the front panel, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished.And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in each bank of the selected band. When the AS operation is finished, it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all) 2) When briefly pressing APS button on the remote control or press button on the front panel, the radio searches for each preset station from the M1. When the field strength level is more than the threshold level of the stop level, the radio holds at that preset number for a few seconds with releasing mute, and then searches again. After finishing a circle of searching, it will stop searching on the M1. NOTE: In FM band, FM1,FM2,FM3 is checked one at a time. In AM band, AM1, AM2 is checked one at a time.3)Press the SCAN button on the remote control to scan the radio frequency. If a valid signal has detected, the current frequency will be hold and blinking for 5 seconds, then press SCAN again to stop and remain the current frequency;otherwise, the radio will go on to scan the other radio frequency 5 seconds later.5. PRESET STATION [ 1-6 ] BUTTONS In RADIO mode:1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons (1-6) .2) To recall the preset memory on the current band, press one of the preset buttons [1-6] .6. STEREO/MONO BUTTON Press ST button on the remote control to select the STEREO or MONO sound mode for FM band.PAGE 4
7. LOC BUTTON 1) In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, press LOC button on the remote control to turn off the LOC function, then tune again for the distance radio station; 2) In RADIO mode, when the signals from the local radio stations are too strong, this could lead to interference. press LOC button on the remote control to turn on the LOC function, Re-tune for the local station required.8. To search for stations with a PTY (PROGRAM TYPE) program Press and hold button on the front panel or press button on the remote controlSEL PTY to select one of PTY programs: PTY MUSIC------------------------ PTY NEWS 1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO 2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA 3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED 4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN 5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN 6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT When turning on a PTY program, the PTY program and PTY word is flashed on LCD. After selecting a desired PTY program and no operation for 5 seconds, it will search for the station of the PTY program. During 1 loop, if the desired station of the PTY program is not found,it returns to previous normal radio and PTY icon disappears.9. AF [ALTERNATIVE FREQUENCIES] BUTTON When pressed briefly, AF switching mode is selected and the state of AF switching mode is displayed by AF segment in display. Segment off: AF switching mode off. Segment on: AF switching mode on, and has RDS information. Segment flashing: AF switching mode on, but RDS information is not received yet. When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minutes for strong station to a few seconds for weak station. Every time that new AF is stronger than current station, it switches over to that frequency for a very short time, and the NEW FREQUENCY is displayed for 1-2 seconds. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save RDS program. 10. TA [TRAFFIC ANNOUNCEMENT] BUTTON When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be displayed on LCD for a while. When traffic announcement is transmitted:1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.2). If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume level when the traffic announcement is over. If volume is adjusted during traffic announcement, only the traffic announcement volume is validPAGE 5
USB Operation1. Pause Playback During playback, press PLAY/PAUSE button on the front panel or remote control to pause the playback, press PLAY/PAUSE button again to resume normal playback.2. Stop Playback During playback, press STOP button once to pause the playback, then press the PLAY/PAUSE button to resume the normal playback; press STOP button twice to stop the playback, then press PLAY/PAUSE button to start playback from the beginning of the first chapter/track. 3. Select Chapter with the or button or / Button Press or button on the front panel or / Button on the remote control during playback to select the previous or next chapter to playback. Note: Press or button or press / Button multiple times to advance multiple chapters/tracks backward or forward .4. To scan tracks During playback, press INT button on the front panel briefly to play the first 10 seconds of each track. Press INT button again to cancel INT function and retain playing the track currently selected. 5. To repeat track(s) During playback, press RPT button briefly to play the current track repeatedly, and the LCD will display RPT ONE. Press RPT button twice to play the tracks in the Album repeatedly, and the LCD will display RPT DIR. Press RPT button thrice to play the tracks of the albums, and the LCD will display RPT ALL. Press RPT button again to cancel RPT function, and the LCD will display RPT OFF.6. To play tracks in random During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM function.7. Tracks search Press APS button on the remote control, it will activate TRK SEARCH mode. The LCD will display TRK 0/00/000(deside on the total number of tracks in the USB stick) and flash the 0 on the biggest digit position. Then press + or - button on the remote control to select number on the flashing digit position from 0 ~ 9, Press APS button to change the position and with the same means to select numbers in the other position. After finishing selecting the numbers on all digits position, press PLAY/PAUSE button to play the track of the selected serial number. PAGE 6
mobileShort press CLEAR button to cancel the wrongly input number if necessary(3)Short press TEL button to execute the dialing.(1)Press TEL button to CALL mode, the LCD will display CALL(2)Input telephone number with number button 0~9.2)Select the item of Finding the Bluetooth Device and enter it. After finishing the finding,it will show the name of the Bluetooth Device FURRION DV3010-XXXX (where X can be any character A-Z or number 0-9 ) .Select it and enter it, then it will show an interface that ask you to input a password, input the password 0000 and enter it. Then it will tell you pair OK.Bluetooth Handsfree System Short press TEL /1 button on the front panel,it will show CALL OUT on the LCD, then it will execute the dialing.
7. To play an audio file from an external Bluetooth device(mobile phone) of the DV30106. In BT mode, press CALL LOG button to check the LAST DIAL,LAST IN,LAST MISS phone numbers(press + or - button to rotate)8.To setup your Stereo using NFC(only support mobile phone with NFC function)(1) Turn on the NFC function of your mobile phone and make sure the screen is active and unlocked.(2) With the NFC detection area of your phone touch with the NFC detection area of the Stereo, you can connect or disconnect your mobile phone with the Stereo conveniently. Note: For the first time pair and connect, it will ask you to input a password. The password is “0000”.5.1 Incoming call ringing, short press TEL button on the remote control or 1 button on the front panel to accept the call.5.2 To reject Incoming call ringing, short press HANG UP button on the remote control or 2 button on the front panel to REJECT the call.5.3 During a phone call, short press HANG UP button on the remote control or 2 button on the front panel to end the call.Note: During other modes(execpt Bluetooth conversation), press BT MODE button on the front panel to switch the mode with others.Note: When an incoming call is present the LCD of the DV3010 will display CALL IN.After the device has been paired successfully and the DV3010 screen displaysLINK OKIf your mobile device supports A2DP you will then be able to stream music fromyour Bluetooth device so it can be played by stereo speaker.You must select on your mobile Bluetooth device to play the audio through Bluetooth.If your mobile device supports AVRCP then you will be able to control the basic phone audio output functions by the Wall mount Stereo controls. Eg.Play Pause.PAGE 8
SCREW SCREWInstalling the unit* Before finally installing the unit, connect the wiring temporarily and make sure the unit and the system work properly.*Fix the unit with screw according to following diagram. 1. Remove plastic shell of the front panel from the unit.2. Fix the unit with 4 pieces #8 pan head self tapping screw.3. Put back plastic shell of the front panel to the unit.PLASTIC SHELLOF THE FRONT PANELPAGE 9
Wiring DiagramIR REMOTE JACKANTENNAWIRING CONNECTING SOCKETAV IN AV OUTSUBWOOFER OUTAUDIO INWiring connecting socket viewGREYWHITEWHITE/BLACKGREEPURPLEBLUENONEMEMORY B+REDBLACK GROUNDAUTO ANTENNAGREE/BLACKPURPLE/BLACKGREY/BLACKFRONT RIGHT SPEAKER (+)REAR RIGHT SPEAKER (+)FRONT LEFT SPEAKER (+)REAR LEFT SPEAKER (+)FRONT RIGHT SPEAKER (-)REAR RIGHT SPEAKER (-)FRONT LEFT SPEAKER (-)REAR LEFT SPEAKER (-)PIN NO COLOR FUNCTION123456789101112PAGE 10
SpecificationGENERALSupply Voltage DC 12VCurrent Consumption Max.10APower Output 4x 25W RMSNumber of channels 2 STEREO channels.Unit Dimensions (L X W X H): 200x110.5x105(mm) FM SECTIONFrequency range 87.5Mhz - 108Mhz (Europe) 87.5 Mhz - 107.9Mhz(U.S.A.) 87.5 Mhz - 108Mhz(Australia)Effective sensitivity 3uV.I.F Frequency 10.7MHz.AM SECTIONFrequency range 522Khz - 1620Khz(Europe) 530khz - 1710Khz(U.S.A.) 522 Khz - 1710Khz(Australia)Effective sensitivity 40dBI.F Frequency 450KHz Preamp Output 2 V OutputUSB PLAYBACKSystem MP3 audio system<=5Frequency characteristics 20Hz -100Hz dB<=5 10KHz-20KHz dBSignal to noise (USB) 50dB [1KHz]FCC Notice:NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna.---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.---Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cmbetween the radiator & your body.Note: It must not be collocated or operated in conjunction with any other antenna or transmitter.

Navigation menu