Furrion DV5XXX Car DVD Audio with Bluetooth User Manual 15 DV5700 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	2846189
Application ID	3ASlcJiaoQpWRxijU+SzuA==
Document Description	15_DV5700 UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	178kB (2224955 bits)
Date Submitted	2015-12-18 00:00:00
Date Available	2015-12-18 00:00:00
Creation Date	2015-12-08 10:59:10
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-12-08 10:59:15
Document Title	15_DV5700 UserMan
Document Creator	Adobe InDesign CS6 (Windows)

DV5700
INSTRUCTION MANUAL
MIC
SEL
10
MODE
/MUTE
AS/PS
INT
RPT
11
BAND/LOUD
RDM
20
19
21
MIC
SEL
MODE
/MUTE
AS/PS
INT
RPT
BAND/LOUD
RDM
DVD Stereo
180W/CD/DVD/Radio/MP3
8 9
14
15
16
17
18
USB/AUX-IN
4 (1-6)
Subwoofer Out/Bluetooth
22
13
12
23
BEFORE YOU BEGIN
PRECAUTIONS:
CAUTION:
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
•
•
•
•
Keep this manual handy as a reference for operating procedures and precautions.
Always keep the volume low enough so you can hear sounds outside of the car.
Protect this product from moisture.
If the battery is disconnected or discharged, the preset memory will be erased and must be
reprogrammed.
FEATURES:
DVD
Supported DVD-video, DVD+/-R, DVD+/-RW and DVD+/-DL.
VCD
Supported VCD featuring PBC (playback control).
CD
Supported CD, CD-R and CD-RW.
TV System
This unit is PAL/NTSC system compatible. When connecting other components to this unit, be
sure components are compatible with the same video system or else images will not be correctly
reproduced.
Aspect Ratio Selection
Switching between wide screen, letter box and panscan display is possible.
Audio Selection
You can switch between multiple audio systems recorded on a DVD as desired.
Subtitle Selection
You can switch between multiple subtitle languages recorded on a DVD as desired.
When an operation is prohibited
When you are watching a DVD and attempt to perform an operation, it may not be supported by
the programming on the disc. When this happens, this unit indicates on the screen.
IM-DV5700-Rev1.0 - PAGE 2
INSTALLATION GUIDE
Location
• Choose a mounting location away from humid areas, water sources, appliances or any equipment
that can radiate heat.
• Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure that area
behind the wall mount stereo has a vent hole or if it is an enclosed box and has adequate room
around the rear of the unit for cooling.
• Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not pressed
against the heat sink.
Installing the unit
• Before finally installing the unit, connect the wiring temporarily and make sure the unit and the unit
and the system work properly.
• Fix the unit with screw according to following diagram.
182.6mm
51mm
1 Release screw
32.7mm
9.15mm
194.6mm
Recommended
cutout
TO SUPPORT THE UNIT
  1. UNIT (included)
  2. MOUNTING BRACKET (included)
  3. MOUNTING SCREW CM5X8mm x 4PCS
(included)
  4. MOUNTING SCREW PA5X16mm x 4PCS
(included)
  5. TRIM COVER (included)
  6. REAR SUPPORT STRAP (included)
  7. HEX NUT (included)
  8. LOCK WASHER (included)
  9. PLAIN WASHER (included)
10. TAPPING SCREW PA5X16mm
(included)
10
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
IM-DV5700-Rev1.0 - PAGE 3
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
button to turn OFF the unit first.
Then press the Release button
detach the panel by pulling it towards you as illustrated.
15°
15°
15°
15°
Notes:
• Do not press the front panel hard against the unit when attaching it. It can be easily attached by
pressing it lightly against the unit.
• When you carry the front panel with you, put it in the supplied front panel case.
• Do not press hard or give excessive pressure to the LCD display of the front panel when attaching
it to the unit.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors between the unit and
the front panel are contaminated with dirt. In order to prevent this from
happening, detach the front panel by pressing the
button and clean the
connector from time to time.
Clean the connector with a cotton swab together with contact cleaner(not
included.) as illustrated. Be sure to clean them carefully pin by pin and make
sure not to damage the connecting points.
Main unit
Cotton Swab
Rear of front panel
WIRE CONNECTION GUIDE
Audio Output:
Left (White) and Right (Red)
Audio Input:
Left (White) and Right (Red)
Subwoofer Output: Green
Video Output: Yellow
Connect to external A/V system to display
Bluetooth Antenna: Black
Note: Red Wire must be connected
by car ignition key in order to avoid
that car battery being drained when
the car will be not used for long
period.
BLUETOOTH ANTENNA
SUBWOOFER OUTPUT VIDEO OUTPUT (YELLOW)
(GREEN)
L(WHITE)
R(RED)
ANTENNA
CONNECTOR
AUDIO INPUT AUDIO OUTPUT
FRONT RIGHT
SPEAKER
FRONT LEFT
SPEAKER
REAR LEFT
SPEAKER
GREY/BLACK(-)
GREY(+)
WHITE/BLACK(-)
WHITE(+)
GREEN(+)
GREEN/BLACK(-)
PURPLE(+)
Maintenance
REAR RIGHT
PURPLE/BLACK(-)
SPEAKER
FUSE REPLACEMENT
RED
IGNITION SWITCH
If the fuse blows, check the power connection and
BLUE
AUTO ANTENNA
replace the fuse. If the fuse blows again after the
BLACK
replacement, there may be an internal malfunction.
GROUND
In this case, consult your nearest repair center.
MEMORY B+ YELLOW
FUSE 10A
Warning
Use the specified fuse amperes for each lead. Use of a higher fuse amperes may cause serious damage.
IM-DV5700-Rev1.0 - PAGE 4
1
/MUTE
INT
RPT
RDM
Locations of Parts (Main unit)
10
11
20
19
MIC
21
SEL
MODE
/MUTE
INT
MIC
SEL
MODE
AS/PS
BAND/LOUD
10
/MUTE
INT
RPT
RDM
11
MIC
SEL
14
15
MIC
MODE
16
17
/MUTE
AS/PS
18
INT
BAND/LOUD
23
RPT
RDM
SEL
4 (1-6)
MODE
/MUTE
10
1. POWER ON/OFF ( ) / MUTE BUTTON
2. SELECT FUNCTION BUTTON (SEL)
3. VOLUME KNOB
4. PRESET STATIONS (1,2,3,4,5,6) BUTTON
5. BAND / LOUDNESS BUTTON
6. MODE / SUBWOOFER BUTTON (MODE)
7. AUTO SEEK/PRESET
SCAN
BUTTON (AS/PS)
13
12
8. PREVIOUS/NEXT TRACK/CHAPTER BUTTON (
9. AUTO SEEK TUNING BUTTON  
10. FRONT PANEL RELEASE BUTTON ( )1
11. LCD DISPLAY
12. DISC EJECT BUTTON ( )
13. DISC SLOT
14. PLAY/PAUSE BUTTON
15. INTRO BUTTON (INT)
16. REPEAT BUTTON (RPT)
17. RANDOM BUTTON (RDM)
18. SEARCH PREVIOUS / NEXT FOLDER BUTTON (
19. ANSWER BUTTON (
20. HANG UP BUTTON (
13
12
21. USB PORT
22. MEMORY CARD SLOT (SD/MMC)
23. AUX IN
11
20
19
22
SEL
MODE
AS/PS
INT
RPT
14
BAND/LOUD
RDM
14
15
16
17
4 (1-6)
13
IM-DV5700-Rev1.0 - PAGE 5
22
18
12
INT
21
MIC
/MUTE
23
15
Locations of Parts (Remote Control)
1. POWER ON/OFF
2. MODE
3. PLAY/PAUSE
4. TITLE / PLAYBACK CONTROL (PBC)
5. SELECT (SEL)
6. SEEK+/SEEK- / PREVIOUS/NEXT TRACK/CHAPTER
7. VOL +/VOL8. GOTO
9. AUDIO
16
10. OK
11. UP/DOWN/LEFT/RIGHT
12. REPEAT/AUTO SEEK/PRESET SCAN
18
13. RANDOM / BAND / LOUDNESS
14. INTRO
15. SYSTEM (PAL/NTSC)
16. SUBTITLE
22
17. SETUP
18. EQUALIZER / ANGLE
14
19. SLOW MOTION
20. A-B REPEAT/ZOOM
21. STOP
22. CLOCK / ON SCREEN DISPLAY
23. MUTE
26
24. MAIN MENU
25. STEP (FRAME BY FRAME PLAYBACK)
26. PREVIOUS/NEXT FOLDER
27. TWO DIGIT TRACKS SEARCHS
28. PHONE NUMBER
29. ANSWER
30. HANG UP
17
20
23
24
10
11
7 VOL+/21
12
13
15
27
25
19
28
30
29
Use and care of the remote control
Installing the battery
Slide the tray out on the back of the remote control and insert the battery with
the (+) and minus (-) poles pointing in the proper direction.
• When using for the first time, pull out the film protruding from the tray.
CAUTIONS
• Remove the battery if the remote control is not used for a month or longer.
• Do not recharge, disassemble, heat or dispose of the battery in a fire.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control completely clean and install a new
battery
• When disposing of used batteries, please comply with government regulations or environmental
public institution’s rule that apply in your country/area.
• Always check carefully that you are loading the battery with plus (+) and minus (-) poles facing
the proper directions.
Using the remote control
Point the remote control in the direction of the front panel to operate.
IMPORTANT
• Do not store the remote control in high temperatures or direct sunlight.
• Do not let the remote control fall onto the floor, where it may become jammed under the brake
or accelerator pedal.
IM-DV5700-Rev1.0 - PAGE 6
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press “ ” button to turn on unit. To turn off, press and hold this button for 2 seconds.
Selecting a source (MODE)
Press MODE repeatedly to switch between TUNER, DISC, USB, SD, Bluetooth and AV IN mode.
Loading a disc
Make sure power is turned ON before inserting a disc.
1. Press
to open the front panel
2. Insert a disc into the disc slot
Ejecting a disc
Make sure power is turned ON before ejecting a disc. Press
button to eject disc.
Adjusting Volume/Bass/Treble/Balance/Fader
VOLor VOL
VOL
• Unit: Turning the VOL knob Right or Left. Increase or decrease the volume by turning VOL
. Press the SEL button briefly until the BASS, TREBLE, BALANCE and FADER function.
• Remote Control: Press VOL+ or VOL- to increase or decrease volume.
Further settings via the Select Function Button (SEL)
Press and hold SEL button to adjust EQ/LOUD/STEREO/LOCAL:
2 sec.
SEL
EQ
SEL
LOUD
SEL
STEREO
SEL
LOC
EQ CONTROLS
Turn VOL knob to select FLAT/CLASS/ROCK/CINEMA.
LOUDNESS
Turn VOL knob to select LOUD ON/OFF.
STEREO/MONO
Turn VOL knob to select STEREO/MONO. When reception of an FM station is weak, listening quality
can be improved by switching to mono sound.
LOCAL/DX
Turn VOL knob to select LOCAL/DX. At LOCAL the LCD Display shows LOC ON, at DX(Distant)
the LCD Display shows LOC OFF. “Local” position in areas with strong signals to let radio stop at
only strong stations during manual tuning (LOC appears). Press to Distant position in areas with
weak signals to listen to all stations.
Mute
• Unit: Press “ /MUTE” button once to mute the sound, press again to resume.
• Remote Control: Press button to mute the sound at once. Press again to return to previous
volume level.
Loudness
• Unit:  Press and hold BAND/LOUD button to turn on/off LOUDNESS feature.
• Remote Control:  Press and hold LD button on remote control to turn on/off LOUDNESS feature.
Equalizer
Remote: Press EQ button. Press EQ again or (
Cinema/Rock/EQ Off equalize modes.
) button to select between Flat/Classic/
Subwoofer
• Unit:  Press and hold MODE button to turn on/off subwoofer.
IM-DV5700-Rev1.0 - PAGE 7
Clock Setting
1. Press CLK button on remote control.
2. Press and hold CLK button again.
3. Turn VOL knob on unit to adjust hours. Press CLK button and Turn VOL button on unit to adjust
minutes.
4. Press OK button on remote control.
LISTENING TO RADIO
Band
Press BAND button on unit or BD button on remote control repeatedly will toggle cyclically between
each band. FM1--FM2--FM3--AM1--AM2.
Automatic or Manual tuning (
MANUAL TUNING: Press and hold
button 2 sec. until MANUAL show on the display.
Press
button to adjust by channel step frequency.
AUTOMATIC TUNING: Press
button are operated as auto seek tuning.
Auto Seek/Preset scan (AS/PS)
Preset Scan - By pressing AS/PS button shortly, the radio plays each preset station for 5 seconds.
Auto Seek - By pressing AS/PS button longer than 1 sec, auto seek is activated. The strong stations
are preset and stored in the corresponding preset number. When Auto Seek operation is finished,
the radio executes the preset scan.
Storing and Recalling Frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for
later recall with the touch of a button.
1. Choose a desired BAND.
2. When you find a frequency that you want to store in memory, press a NUMBER(1-6) and hold
until the preset number shows and lit in the display.
3. The selected radio station frequency has been stored in memory. The next time you press the
same NUMBER (1-6) the radio station frequency is recalled from memory.
Note: Up to 6 stations can be stored in each band.
PHOTO Viewing:
Unit:
Files search for stop mode:
1. Press AS/PS button to stop any playback.
2. Press
button to select “photo” file listed.
3. Rotate volume knob to select *.JPG file to viewing or press SEL button to start play from first
photo.
4. Press
for next photo.
5. Press
for previous photo.
6. Press 3 RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL repeatedly playback until
press [A/PS] button.
Remote control:
Files search for stop mode:           
1. Press STOP button to stop any playback.
2. Press ( ) button repeatedly to select “photo” file listed.
3. Press ( , ) button to select desired folder then press OK button to confirm.
4. Press ( , ) button to select desired JPG file then press OK button to start playback photo.
5. Press SEEK+
for next photo.
6. Press SEEKfor previous photo.
7. Press RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL repeatedly playback until
press STOP button.
IM-DV5700-Rev1.0 - PAGE 8
CD/MP3/WMA Music listening:
Unit:
Files search for stop mode:
1. Press AS/PS button to media seletion.
2. Press
button to select “MUSIC” file listed.
3. Rotate volume knob to select desired folder.
4. Rotate volume knob to select music file and press SEL button to playback or press SEL button
to start play from first file.
5. Press
for next file.
6. Press
for previous file.
7. Press 1
button for pause, press again for resume playback.
8. CD playback only: Press INT button to select INTRO or SEQ play, you can select INTRO to
introducing play each file 10sec.
9. Press 3 RPT button repeatedly to select Rep-1/Rep DIR(MP3/WMA only)/Rep ALL/Rep OFF
to repeatedly playback.
10.Press 4 RDM button to select RANDOM ON/OFF to random playback.
Remote control:
Files search for stop mode:           
1. Press STOP button to stop any playback.
2. Press ( ) button repeatedly to select “MUSIC” file listed.
3. Press ( , ) button to select desired folder then press OK button to confirm.
4. Press ( , ) button to select desired file then press OK button to start playback music.
5. Press SEEK+
for next file.
6. Press SEEKfor previous file.
7. Press
button for pause, press again for resume playback.
8. CD playback only: Press INT button to select INTRO or SEQ play, you can select INTRO to
introducing play each file 10sec.
9. Press RPT button repeatedly to select Rep-1/ Rep DIR(MP3/WMA only)/Rep ALL/Rep OFF
repeatedly playback.
10.Press RDM button to select RANDOM ON/OFF to random playback.
Movie Playback:
Unit
Files search for stop mode:
1. Press AS/PS button to stop any playback.
2. Press
button to select “Video” listed .
3. Rotate volume knob to select movie file to playback or press SEL button to start play from first
file.
4. Press
for next file.
5. Press
for previous file.
6. Press 3 RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL/Rep OFF repeatedly
playback until press AS/PS button.
Remote control:
Files search for stop mode:           
1. Press Stop button to stop any playback.
2. Press ( ) button repeatedly to select “Video” file listed.
3. Press ( , ) button to select desired folder then press OK to confirm.
4. Press ( , ) button to select desired movie file then press OK button to start playback.
5. Press SEEK+
for next file.
6. Press SEEKfor previous file.
7. Press RPT button repeatedly to select Rep-1/Rep DIR/Rep ALL/Rep OFF repeatedly playback
until press STOP button.
IM-DV5700-Rev1.0 - PAGE 9
Stopping Playback
1. Press STOP on remote control during playback to stop playback. That position is stored in
memory.
2. Press
to continue. Playback starts from the track at which it was stopped.
Fast Forward / Fast Reverse
1. During playback, press and hold
or
. Unit scans at the speed of x2 - x4 - x8 - x16 - x20.
2. To resume normal playback at a desired point, press
Note: No sound is come out during fast forward/fast reverse at over x2 high speed search.
Finding the Beginning of Tracks
During playback, press
or
: Press to start playback from the beginning of the previous chapter or track.
: Press to start playback from the beginning of the following chapter or track.
Pause Playback
During playback, press
. Press again to resume playback.
A-B Repeat Playback
This feature allows you to loop playback a section of the movie/audio starting from Point A to B.
1. Press the
button to play the movie/audio.
2. Once you have located the section you wish to playback on loop repeat, press and hold
Remote’s A-B button. You will see “REPEAT A-” on the screen.
3. Let the movie/audio play on until you have reached the end of the section you wish to watch on
continuous loop. Once you have reached this point, press and hold remote’s A-B button again.
“REPEAT A-B” will appear on your screen. Playback will now start from Point A –B.
4. To stop A-B repeat playback, press and hold remote’s A-B button once more until “A-B CANCEL”
disappears and normal playback resumes.
Displaying information (OSD) - video files only
During playback, you can see all information and current play settings. Display will show related,
elapse time, title number, chapter number and other information.
Press OSD on the remote control once. Unit will display the disc elapse time.
USB / MEMORY CARD (SD/MMC) / AUX-IN PLAYBACK
USB PORT
AUX IN
An external AV source (e.g. portable MP3 player) can be connected to the AUX IN
socket to be played back by the vehicle loudspeakers.
1. Connect the AUX-IN socket with the AV output of the external device.
USB/Memory Card (SD/MMC)
The device is equipped with a USB interface and a memory card reader for SD/
MMC cards. MP3/WMA/AVI files stored on these media can be played.
AUX IN
Note:
- Due to the great variety of devices with USB and SD/MMC card interfaces that sometimes have
manufacturer-specific functions, we cannot guarantee that all media will be recognized and that
all operational functions will be available with this device.
- You cannot operate USB hard drives on the device.
- It maybe necessary to turn the flash memory ON so that it can be read.
1. Plug your USB storage medium into the USB port.
2. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio / video files on how to control USB or memory
card playback.
IM-DV5700-Rev1.0 - PAGE 10
15°
15°
DVD/VCD PLAYBACK
Playback
1. Insert a disc. When the disc offers a menu, the menu is displayed. When a disc already inserted,
press MODE to switch to disc mode.
2. On DVD and VCD with playback control (PBC), menu screens may appear automatically. If this
happens, perform the operation described below to start playback.
CAUTION: Make sure that the TV system settings is set correctly according to the disc that is
playing. If you are not sure, leave it set to “Auto”. Improper setup of TV system might cause the
video to stop/skip/pause playing although audio might continue to play. You can setup TV settings
using the SETUP feature of the remote control. Refer to “SETTING UP THE DVD PLAYER”
section.
DVD menu
Press , ,
to select the desired item, then press OK.
VCD menu
Use the number keys (“0” to “9”) to select the desired number. The menu screen does not appear
when the PBC function is turned off. In this case, press and hold button to turn on PBC feature.
Turning PBC ON/OFF (VCD only)
PBC (Playback Control) is a feature found on VCD 2.0 and SVCD 1.0. PBC allows control of the
playback of play items and the possibility of interaction with the user through the remote control
or some other input device available. If it’s on, the player won’t auto start after inserting the disc
because it will take time to select program on disc; if it’s off, the player will auto playback the
program on disc one by one.
1. To turn ON PBC function, press PBC on the remote control. To turn OFF, press the button again.
Note:
• Not all VCD/SVCD disc have PBC functions.
• While playing VCD and PBC function is turned ON, Repeat / Intro / Random function will not
work.
Repeat Playback
FOR VCD
1. Press RPT on the remote control during playback.
2. Every time you press this button, the unit switches to the following settings:
Repeat 1 – Repeat the current playback track.
Repeat Off – Turn OFF repeat function.
Note: PBC feature in VCD disc needs to be STOP in order to use Repeat playback.
FOR DVD
You can choose between repeat playback of a title or chapter.
1. Press RPT on the remote control during playback.
2. Every time you press this button, the unit switches to the following settings:
Repeat Title – Repeat the current playback title.
Repeat Chapter – Repeat the current playback chapter.
Repeat Off – Turn OFF repeat function.
IM-DV5700-Rev1.0 - PAGE 11
Searching for particular track using GOTO
You can use the GOTO function to search for a desired track number or particular point of a track to play.
1. Press GOTO button on the remote control during playback. Press
or button to select Title/
Chapter, Time serach appears.
2. Enter Title/Chapter for currently playback disc. press enter to confirm.
3. If you want to search by time, enter the time, minute and second then press enter to confirm.
Changing audio language during playback (Multi-audio)
Some DVD can provide audio playback with different languages and different systems (Dolby
Digital... etc.). With DVD featuring multi-audio recordings, you can switch between languages/
audio systems during playback.
VCD can provide different audio languages usually divided into left and right channels.
1. To choose different audio, simply press AUDIO button on the remote control repeatedly during
playback.
Note:
• With some DVD, switching between languages/audio systems may only be possible using a
menu display.
• You can also switch between languages/audio systems using SET-UP MENU or tap the screen
then press Audio
Changing the subtitle language during playback (Multi-subtitle)
With DVD featuring multi-subtitle recordings, you can switch between subtitle languages during
playback.
1. Press SUBT button on the remote control during playback. Press repeatedly until the supported
desired subtitle appears.
Note:
• With some DVD, switching between subtitles may only be possible using a menu display.
• You can also switch between subtitles using SET-UP MENU or tap the screen then press
Subtitle.
Changing the viewing angle during playback (Multi-angle) – (DVD only)
With DVD featuring multi-angle (scenes shot from multiple angles) recordings, you can switch
among viewing angles during play-back.
1. Press and hold ANGLE button on the remote control during playback of a scene. Press ANGLE
button repeatedly to select the desired angle to play.
Title (DVD only)
During DVD playback, Press TITLE button on remote control to return to FIRST title.
Return to Root Menu (DVD only)
During DVD playback, press MENU button to return to root menu.
Note: Some DVD may not contain root menu.
Slow motion playback
This feature lets you slow down playback.
1. Press SLOW button on the remote control during playback.
2. Pressing it repeatedly will switch you to the following steps: 1/2 - 1/ 3 - 1/4 - 1/5 - 1/6 - 1/7.
Note:
• To resume normal playback, press PLAY/PAUSE (
).
• There is no sound during slow motion playback.
• With some disc, slow motion may be unclear during slow motion playback.
Zooming in During Playback
You can zoom in into the picture during playback.
1. Press ZOOM button on the remote control during playback.
2. Every time you press this button, the unit will zoom 2 - 3 - 4 - 1/2 - 1/3 - 1/4 times and OFF.
IM-DV5700-Rev1.0 - PAGE 12
STEP (Frame by frame playback)
This lets you move ahead one frame at a time during playback.
Each time you press step button on remote control, you move ahead on frame. To return to normal
playback, press
button.
PAL / NTSC
Press and hold SYS button to switch between PAL, NTSC system.
Return / Go Back
Press MENU button on remote control to go back one level or return to previous menu.
CUSTOMIZING SOUND SETTINGS
1. Press SEL button to enter AUDIO setup. Selected item will be highlighted. You can set BASS,
TREBLE, BALANCE, FADER.
2. Rotate VOL knob to make adjustments.
3. Press SEL button to select BASS,TREBLE,BALANCE,FADER and exit settings.
SETTING THE DVD PLAYER
You can flexibly customize the unit to suit your preference. You can set the language and other
video and audio settings so when playback starts it will always use your preferred settings.
Important:
1. Play any video file before you can access the setup.
2. Press SETUP button on the remote control.
3. Used , , , to select DVD to return/enter setup category.
Settings
Category
TV SYSTEM
AUTO PLAY
TV TYPE
SYSTEM SETUP
PASSWORD
RATING
DEFAULT
OSD Language
AUDIO Language
LANGUAGE SETUP SUBTITLE Language
MENU Language
MPEG4 Language
BRIGHTNESS
CONTRAST
VIDEO SETUP
HUE
SATURATION
SHARPNESS
Options
NTSC, PAL, AUTO
ON/OFF
4:3PS, 4:3LB, 16:9
Setup password
Setup rating level
Restore to factory settings
Select preferred options appear on screen
Select preferred options appear on screen
Setting Rating Password
1. Press SETUP button on the remote control.
2. Using Navigation keys select System Setup > Password and press OK button.
3. Enter the default password ‘0000’ and press OK button to unlock first and then enter new 4
digit password and press OK button. The unlock logo will switch to lock indicating password
has been set.
IM-DV5700-Rev1.0 - PAGE 13
Note:
- The default password is ‘0000’.
- In case you forgot your password, you can use the master password ‘8888’ to unlock and reset
the password.
- Master password will only work while SETUP button is press during playback.
Supported Video Format
File
Extension
Container
Video Codec
Audio Codec
Resolution
.avi
.divx
AVI
DivX 3.xx
DivX 4.xx
DivX 5.xx
DivX 6.xx
XviD
MPEG-1
Dolby Digital (AC3)
WMA/PCM/LPCM
MPEG-Audio
(MP1/MP2/MP3)
720 x 480 (30fps)
.mpg
MPG
MPEG-1
MPEG-2
LPCM
MPEG-Audio
(MP1/MP2/MP3)
720 x 576 (30fps)
.dat
DAT
MPEG-1
MPEG-2
LPCM
MPEG-Audio
(MP1/MP2/MP3)
352 x 240 (30fps)
.vob
VOB
MPEG-1
MPEG-2
Dolby Digital (AC3)
720 x 480 (30fps)
Remark
Supported Audio Format
File Extension
Audio Codec
Bit Rate
Sampling Rate
.mp3
MP3
16kbps - 320kbps
8k - 48kHz
.wma
WMA
16kbps - 320kbps
Note: Reading the above file formats is not guaranteed.
IM-DV5700-Rev1.0 - PAGE 14
8k - 48kHz
Remark
WMA only
support WMA7/
WMA8/WMA9
(CBR/VBR)
(Only support
353 format)
HOW TO USE BLUETOOTH IN YOUR STEREO
Pairing
Before your mobile phone can communicate with the stereo, you must first complete the pairing
procedure to connect them together.
1. Press MODE button on main unit/remote control until “BT” or “BT AUDIO” is shown on LCD
Display.
2. Turn on Bluetooth function of your mobile phone, then select “add Bluetooth device” from your
mobile phone; the mobile phone will search any activated Bluetooth devices nearby, select
“Furrion DV5700” and enter Passkey “0000” to connect (refer to manual of your mobile phone
for detail if needed).
3. After this pairing process is successfully completed, connect your mobile phone with the stereo,
a Bluetooth logo will appear on mobile phone’s notification bar.
Note: “Furrion DV5700” is the Bluetooth device name of this stereo.
Audio Streaming
If your mobile phone supports A2DP profile, the music playback can be streamed to the stereo.
1. Make sure your mobile phone and stereo is properly paired and connected.
2. Play music on your mobile phone.
3. “BT AUDIO” will be shown on LCD Display of stereo, music is streamed to the stereo.
4. You can press
or
button on main unit to select previous or next track/file in mobile
phone.
Making Call
Important: Before you make a call, make sure your mobile phone and stereo are properly paired
and connected.
1. Press MODE button on main unit/remote control until BT or BT AUDIO is shown on LCD Display.
2. Press and hold INT button on main unit/remote control to go to previous menu, then “BT” will
be shown on LCD Display.
3. Press
button on main unit to select “DIAL”, press and hold SEL button on main unit/remote
control to enter“KEYPAD”.
4. To make a call via remote control, tap number buttons and press “
” button on main unit/
remote control to dial.
5. Press “
” button on main unit/remote control to hang up.
Answering/Rejecting/Hanging Up Call
1. To answer an incoming call, press “
” button on main unit/remote control. To reject an incoming
call, just press “
” button on main unit/remote control.
2. After you have finished the conversation, press “
” button on main unit/remote control to hang
up.
History
History contains the lists of dialed, received and missed calls.
1. Press MODE button on main unit/remote control until “BT” or “BT AUDIO” is shown on LCD
Display.
2. Press and hold INT button on main unit/remote control to go to previous menu, then “BT” will
be shown on LCD Display.
3. Press
button on main unit to select “HISTORY”, press and hold SEL button on main unit/
remote control to enter “CALL LOG”.
4. Press
or
button on main unit to select the number, then press “
” button on main
unit/remote control to dial.
IM-DV5700-Rev1.0 - PAGE 15
TECHNICAL SPECIFICATIONS
DVD PLAYER SYSTEM
Signal to Noise Ratio
Channel Separation
Frequency Response
> 60 dB
> 50 dB (1kHz)
20 Hz - 20 kHz
FM RADIO
Frequency Range    
Channel Step          
Sensitivity
Stereo Separation
Signal to Noise Ratio
87.5-107.9 MHz
200 kHz
2.8 µV
30 dB
50 dB
AM RADIO
Frequency Range
Usable Sensitivity
530-1710 KHz
32 dB
AUDIO/VIDEO OUTPUT
Output
Impedance
750 mV
10k Ohm
GENERAL
Power Supply
Speaker Impedance
Output power
Fuse
12V DC (10.8-15.6V allowable)
4 or 8 ohm
45W x 4CH
10A
Note: Specification and the design are subject to possible modification without notice due to
improvements.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.   This device complies with Part
15 of the FCC Rules.  Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,  including interference that may cause
undesired operation.
IM-DV5700-Rev1.0 - PAGE 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:12:08 10:59:10+08:00
Metadata Date                   : 2015:12:08 10:59:15+08:00
Modify Date                     : 2015:12:08 10:59:15+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:e85f9b0b-2156-4ab7-a449-eff5e4f762db
Original Document ID            : adobe:docid:indd:5d004fe7-624d-11de-8a7f-99cb8ac190f9
Document ID                     : xmp.id:9FF69BA7579DE51193BDC5B30445B2EC
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5D5DB69F579DE51193BDC5B30445B2EC
Derived From Document ID        : adobe:docid:indd:5d004fe7-624d-11de-8a7f-99cb8ac190f9
Derived From Original Document ID: adobe:docid:indd:5d004fe7-624d-11de-8a7f-99cb8ac190f9
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:12:08 10:59:10+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools