Furuno USA 9ZWDSC60 Maritime DSC controller With MF/HF Watchkeeping Receiver User Manual dsc60 Part 2 of 2

Download:
Mirror Download [FCC.gov]
Document ID	91742
Application ID	83/GhxFtTnFWZPvek+emeg==
Document Description	dsc60 Part 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.7kB (958725 bits)
Date Submitted	2000-03-16 00:00:00
Date Available	2000-03-24 00:00:00
Creation Date	2000-01-14 10:39:22
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-01-14 15:57:39
Document Title	dsc60 Part 2 of 2

5. LOG FILE
The log file stores routine received messages (messages other than Distress), received distress
messages and transmitted messages, each in its own separate log.
5.1
Log File Description
Three memory banks are provided for storage of messages: received ordinary log, received
distress log and transmitted log. Each memory bank stores 50 messages, on a first-in, first-out
basis. This means that a latest message is saved as log no.1 and the log no. of all previous
messages in that memory bank increments by one. When the storage capacity is exceeded the
oldest message is deleted to make room for the latest. Any unread messages are retained, and
marked with *.
5.2
Opening a Log File
5.2.1
Distress log
1. Press the [0/LOG] key to open the log file menu.
WATCH KEEPING
Select log file
DIST
21 RECEIVED ORDINARY
168
RECEIVED DISTRESS
ROUT
21 TRANSMITTED
16903.0
12657.0
8436.5
35˚00.000N 135˚00.000E 23:59
VOLUME
22
2. Select RECEIVED DISTRESS and press the [ENT] key. Use  or  to scroll the log as
desired.
Rcvd distress log
01.JUL-23-19:58
ACKNOWLEDG
Rcvd distress log
45.JUL-01-23:45
*RELAY ALL
DISTRESS
* ELAY ALL
RELAY AREA
RELAY GRP
RELAY INDV
NEW
DELETE
46.JUN-29-19:56
47.JUN-29-19:48
48.JUN-29-19:44
49.JUN-26-12:36
50.JUN-26-12:34
02.JUL-23-19:56
03.JUL-23-13:45
04.JUL-23-11:52
05.JUL-23-11:43
06.JUL-22-21:18
OLD
OLD
NEW
*RELAY ALL
*DISTRESS
*DISTRESS
*ACKNOWLED
*DISTRESS
DELETE
Scroll with
or .
3. To view a file, select it and press the [ENT] key. To return to the distress log, press the
[CANCEL] key.
5-1
* Received message
*OK
ECC:
Rcvd distress log
45.JUL-01-23:45
*RELAY ALL
46.JUN-29-19:56
47.JUN-29-19:48
48.JUN-29-19:44
49.JUN-26-12:36
50.JUN-26-12:34
OLD
NEW
*RELAY ALL
*DISTRESS
*DISTRESS
*ACKNOWLED
*DISTRESS
JUN-26-1999-12:34:56
Select file,
press [ENT]
to view.
DISTRESS CALL
SHIP IN DIST : 987654321
NATURE : UNDESIGNATED
POS : 12˚34N 123˚45E AT 12:34
2182.0 KHZ
TELEPHONE
ANSWER
DELETE
ALL VIEW
4. To delete a file, select it, press  to select DELETE, and press the [ENT] key. The log files
are renumbered to reflect the deletion.
Note: Unread files cannot be deleted.
log
* Rcvd distress
RELAY
ALL
45.JUL-01-23:45
46.JUN-29-19:56
47.JUN-29-19:48
48.JUN-29-19:44
49.JUN-26-12:36
50.JUN-26-12:34
OLD
5-2
NEW
*RELAY ALL
*DISTRESS
*DISTRESS
*ACKNOWLED
*DISTRESS
DELETE
Select file to delete,
press to select
DELETE, press
[ENT] to delete.
log
* Rcvd distress
RELAY
ALL
44.JUL-01-12:34
45.JUL-01-23:45
46.JUN-29-19:56
47.JUN-29-19:48
48.JUN-29-19:44
49.JUN-26-12:36
OLD
NEW
ALL
*RELAY
*RELAY ALL
*DISTRESS
*DISTRESS
*ACKNOWLED
DELETE
5.2.2
Ordinary log
1. Press the [LOG] key to open the log file menu.
WATCH KEEPING
Select log file
DIST
21 RECEIVED ORDINARY
168
RECEIVED DISTRESS
ROUT
21 TRANSMITTED
16903.0
12657.0
8436.5
35˚00.000N 135˚00.000E 23:59
VOLUME
22
2. Press the [ENT] key to open the received ordinary log.
Rcvd ordinary log
01.JUL-23-23:55 *INDIVIDUAL
02.JUL-23-23:41
03.JUL-23-21:34
04.JUL-22-12:34
05.JUL-13-18:21
06.JUN-29-11:23
OLD
PSTN CALL
TEST CALL
ALL SHIPS
*GROUP CALL
AREA CALL
NEW
DELETE
3. Use  or  to scroll the log.
4. To view the contents of a file, select it and press the [ENT] key. To return the ordinary log,
press the [CANCEL] key.
Rcvd ordinary log
45.JUN-29-20:49
POLLING
46.MAY-12-03:31
47.APR-24-01:54
48.MAR-27-22:09
49.FEB-13-18:17
50.JAN-11-11:23
OLD
* Received messageECC:* OK
JAN-11-1999-11:23:45
NEUTRAL
MEDICAL
INDIVIDUAL
INDIVIDUAL
ALL
SHIPS
NEW
[ENT] to
view file.
ALL SHIPS CALL
FROM SHIP : 234567890
SAFETY
2182.0 KHZ
TELEPHONE
DELETE
GO TO ALL VIEW
5. To delete a file, select it, press  to select DELETE, and press the [ENT] key. The log files
are renumbered to reflect the deletion.
Note: Unread files cannot be deleted.
log
* Rcvd ordinary
POLLING
45.JUN-29-20:49
46.MAY-12-03:31
47.APR-24-01:54
48.MAR-27-22:09
49.FEB-13-18:17
50.JAN-11-11:23
OLD
NEW
NEUTRAL
MEDICAL
*INDIVIDUAL
INDIVIDUAL
ALL SHIPS
DELETE
log
* Rcvd ordinary
INDIVIDUAL
Select file, press
select [DELETE],
and press [ENT[.
to
44.JUL-01-23:45
45.JUN-29-20:49
46.MAY-12-03:31
47.APR-24-01:54
48.MAR-27-22:09
49.FEB-13-18:17
OLD
NEW
*POLLING
NEUTRAL
MEDICAL
*INDIVIDUAL
INDIVIDUAL
DELETE
5-3
5.2.3
Transmitted log
1. Press the [LOG] key to open the log file menu.
WATCH KEEPING
Select log file
DIST
21 RECEIVED ORDINARY
168
RECEIVED DISTRESS
ROUT
21 TRANSMITTED
16903.0
12657.0
8436.5
35˚00.000N 135˚00.000E 23:59
VOLUME
22
2. Select TRANSMITTED and press the [ENT] key.
Transmitted log
**
01.JUL-23-23:55
INDIVIDUAL
OLD
PSTN CALL
TEST CALL
ALL SHIPS
*GROUP CALL
AREA CALL
NEW
DELETE
02.JUL-23-23:41
03.JUL-23-21:34
04.JUL-22-12:34
05.JUL-13-18:21
06.JUN-29-11:23
3. Use  or to scroll the log.
4. To view the contents of a file select it and press the [ENT] key.
log
** Transmitted
*INDIVIDUAL
01.JUL-23-23:55
02.JUL-23-23:41
03.JUL-23-21:34
04.JUL-22-12:34
05.JUL-13-18:21
06.JUN-29-11:23
OLD
NEW
PSTN CALL
TEST CALL
ALL SHIPS
*GROUP CALL
AREA CALL
* Xmitted message *
MAY-12-1999-03:31:45
Select file,
press [ENT]
to view.
DELETE
UNABLE ACK
NO REASON GIVEN
TO SHIP : 234567890
ROUTINE
RE-SEND
ALL VIEW
5. To delete a file, select it, press  to select DELETE, and press the [ENT] key. The log files
are renumbered to reflect the deletion.
Note: Unread files cannot be deleted.
6. To re-send a file do the following:
a) Do steps 1-4 above to select file to re-send.
b) Press to select RE-SEND.
c) Press the [ENT] key.
d) Press the [CALL] key.
5-4
6. PREPARING SEND MESSAGES
In Chapter 3 you learned how to manually send individual, group and area calls. In this chapter
you will learn how to send prepare and send them automatically, using prepared messages (files).
50 such files can be stored for future use.
6.1
Preparing Individual Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
file entry
* MessageINDIVIDUAL
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
CALL
--------:PSTN
GROUP
CALL
: TELEPHONE
AREA CALL
: NO INFO
: 2M-INTL
4. Use  or  to select INDIVIDUAL and press the [ENT] key.
5. Press  to select STATION ID and press the [ENT] key.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: --------000000000
: TELEPHONE
: NO INFO
: 2M-INTL
6. Key in ID of station which is to receive the call and press the [ENT] key.
7. Press  to select COM. TYPE and press the [ENT] key.
* Message file entry
CALL TYPE:
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
INDIVIDUAL
: 001234567
TELEPHONE
: TELEPHONE
NBDP-ARQ
: NO INFO
NBDP-FEC
: 2M-INTL
6-1
8. Press  to select COM. FREQ and press the [ENT] key. Choose appropriate item and press
the [ENT] key.
* Message file entry
CALL TYPE:
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
INDIVIDUAL
: 123456789
NO INFO
: TELEPHONE
FREQUENCY
: NO
INFO
CHANNEL
: 2M-INTL
POSITION
9. Press  to select DSC FREQ and press the [ENT] key.
entry
MHZ
* Message24file
MHZ
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
6 MHZ
: 001234567
8 MHZ
: 12
TELEPHONE
MHZ
: NO INFO
: 2M-INL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use
to scroll
menu.
10. Select appropriate frequency and press the [ENT] key.
11. Enter file name and file number as shown on the next page.
6-2
How to Enter File Name and Number
1. Press
to scroll the display and then press the [ENT] key.
* Message file entry
FILE NAME
: ---------------FILE NUMBER : --FILE ENTRY
2. Use the numeric keys and cursor pad to enter file name (max. 16 characters) and press the
[ENT] key. For example, enter FURUNO as the file name. (If the file name exists
the message "Duplicate name! Overwrite OK?" appears. Press [ENT] to write over the
name, or press the [CANCEL] key to escape.)
How to assign file name
[1_] key : 1→_→1
[2ABC] : 2→A→B→C→2
[3DEF] : 3→D→E→F→3
[4GHI] : 4→G→H→I→4
[5JKL] : 5→J→K→L→5
[6MNO] : 6→M→N→O→6
[7PQRS] : 7→P→Q→R→S→7
[8TUV] : 8→T→U→V→8
[9WXYZ] : 9→W→X→Y→Z→9
[0_]
: 0→_→0
1. Press or to select location.
2. Press appropriate key.
How to enter "FURUNO" as file name
1. Press the [3] key to display F.
2. Press .
3. Press the [8] key to select U.
4. Press .
6. Press the [7] key to select R.
7. Press .
8. Press the [8] key to select U.
7. Press .
8. Press the [6] key to select N.
9. Press .
10. Press the [6] key to select O.
3. Press followed by the [ENT] key. Key in file number in three digits with the numeric keys,
and press the [ENT] key. For example, press [0] [0] [1] to enter file number 001.
* Message file entry
FILE NAME
: FURUNO
--FILE NUMBER : 000
FILE ENTRY
4. Press the [ENT] key. The display shows the name and file number entered.
* Message file entry
FURUNO
NO001 file entered
GO TO NEXT FILE
5. Press the [ENT] key to continue.
6-3
6.2
Preparing Group Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
file entry
* MessageINDIVIDUAL
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
CALL
:PSTN
--------GROUP
CALL
: TELEPHONE
AREA CALL
: NO INFO
: 2M-INTL
4. Use  or  to select GROUP CALL and press the [ENT] key.
5. Press  to select GROUP ID and press the [ENT] key.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
-------: 0000000000
: TELEPHONE
: NO INFO
: 2M-INTL
6. Key in ID of group which is to receive the call and press the [ENT] key.
7. Press  to select COM. TYPE and press the [ENT] key.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 001234567
TELEPHONE
: TELEPHONE
NBDP-FEC
: NO
INFO
: 2M-INTL
8. Select appropriate communications type and press the [ENT] key.
9. Press  to select COM. FREQ and press the [ENT] key. Choose appropriate item and press
the [ENT] key.
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 123456789
NO INFO
: TELEPHONE
FREQUENCY
: NO
INFO
CHANNEL
: 2M-INTL
POSITION
10. Press  to select DSC FREQ and press the [ENT] key.
6-4
entry
* Message 24fileMHZ
MHZ
CALL TYPE
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
6 MHZ
: 001234567
8 MHZ
: 12
TELEPHONE
MHZ
: NO INFO
2M-INTL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
11. Select appropriate frequency and press the [ENT] key.
12. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and number.
Note: Your ship’s group ID will be as registered as entered in step 6 of this procedure.
6.3
Preparing Geographic Area Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
file entry
* MessageINDIVIDUAL
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
CALL
--------:PSTN
GROUP CALL
: TELEPHONE
AREA CALL
: NO INFO
: 2M-INTL
4. Use  or  to select AREA CALL and press the [ENT] key.
5. Press  to select AREA and press the [ENT] key.
* Message file entry
CALL TYPE:
AREA CALL
--˚ →
→00˚
-- ˚
AREA : --˚N
00˚N ---˚E
000˚E ↓ 00˚
: TELEPHONE
COM. TYPE
COM. FREQ : NO INFO
: 2M-INTL
DSC FREQ
6. Select location where to enter data with  or , set value with numeric keys and press the
[ENT] key.
6-5
7. Press  to select COM. TYPE and press the [ENT] key.
* Message file entry
CALL TYPE:
INDIVIDUAL
AREA: 34˚N 135˚W ↓10˚ →10˚
TELEPHONE
COM. TYPE
: TELEPHONE
NBDP-FEC
COM. FREQ : NO
INFO
DSC FREQ
: 2M-INTL
8. Press  to select COM. FREQ and press the [ENT] key.
* Message file entry
CALL TYPE:
AREA CALL
AREA : 34˚N 135˚E ↓ 05˚ → 05 ˚
NO INFO
COM. TYPE
: TELEPHONE
FREQUENCY
COM. FREQ : NO
INFO
CHANNEL
DSC FREQ
: 2M-INTL
POSITION
9.
Press  to select DSC FREQ and press the [ENT] key.
entry
* Message 24fileMHZ
MHZ
CALL TYPE : AREA CALL
6 MHZ
↓12 ˚ → 05 ˚
AREA : 34˚N 123˚E
8 MHZ
COM. TYPE
: 12
TELEPHONE
MHZ
COM. FREQ : NO INFO
DSC FREQ
: 2M-INTL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
10. Select appropriate frequency and press the [ENT] key.
11. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and number.
6.4
Preparing PSTN Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
file entry
* MessageINDIVIDUAL
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
CALL
--------:PSTN
GROUP CALL
: TELEPHONE
AREA CALL
: NO INFO
: 2M-INTL
4. Select PSTN CALL and press the [ENT] key.
5. Press  to select COAST ID and press the [ENT] key.
6-6
* Message file entry
CALL TYPE
COAST ID
TEL NO. :
: PSTN CALL
: 000000000
0----------------------
DSC FREQ
: 2M-INTL
6. Key in ID of coast station (seven digits) to send the call to and press the [ENT] key.
7. Press  to select TEL NO. and press the [ENT] key.
* Message file entry
CALL TYPE:
COAST ID
TEL NO. :
PSTN CALL
: 001234567
: --------------------------------
DSC FREQ
: 2M-INTL
8. Key in telephone no. (max. 16 digits) and press the [ENT] key.
9. Press  to select DSC FREQ and press the [ENT] key.
entry
2 MHZ
* Message file
4 MHZ
CALL TYPE:
COAST ID
TEL NO. :
DSC FREQ
PSTN CALL
6 MHZ
001234567
8 MHZ
1234567890--12 MHZ
: 2M-INTL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
TL
10. Select appropriate frequency and press the [ENT] key.
11. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and number.
6-7
6.5
Sending Prepared Messages
1. Press the [*/FILE] key at the DSC standby screen to show the send message file list. Below
is an example of the send message file list.
* Send message file *
001 - FURUNO JAPAN
002 - FURUNO USA
003 - FURUNO UK
004 - FURUNO DENMARK
005 - FURUNO NORWAY
006 - FURUNO SPAIN
007 - FURUNO FRANCE
2. Select file with  or . (You can also select a file by entering its number with the numeric
keys and pressing the [ENT] key.)
3. Press the [CALL] key to send the file.
6-8
7. SETUP MENU
7.1 Setup Menu Overview
The Setup menu, consisting of 11 menus, provides for set up of the equipment according to
expected usage and user's preferences.
1. At the DSC standby screen, press the [#/SETUP] key to display the Setup menu.
Setup menu
****
****
ALARM
SCAN FREQ
AUTO ACK
ERASE FILE
MESSAGE
POSITION
PRINT OUT
USER CH
VOLUME
TEST
SYSTEM
2. Use the Cursor Pad to select a menu and press the [ENT] key. For example, select the
VOLUME menu.
*** Volume setup ***
KEY CLICK
HANDSET
ORDINARY ALARM
DISTRESS ALARM
: ON
: 40
: 30
: 63
3. Use the Cursor Pad to choose item and press the [ENT] key. For example, select KEY
CLICK. A pop-up window showing choices appears.
*** Volume setup ***
KEY CLICK
HANDSET
ORDINARY ALARM
DISTRESS ALARM
: ON
ON
: 40N
OFF
: 30
: 63
4. Use  or  to choose option desired and press the [ENT] key.
5. Press the [CANCEL] key twice to close the menu and return to the DSC standby screen.
7-1
7.2
Alarm Menu
The Alarm menu enables/disables internal and external alarms. Note that the Distress/Urgency
alarm cannot be disabled. Press the [#/SETUP] key, select ALARM and press the [ENT] key to
display the Alarm menu.
Default: ON
ON
OFF
Disables/enables alarm for received Safety,
Ship's Business and Routine messages.
or
to set.
Note: Alarm for Distress and Urgency
messages cannot be disabled, and its
decibel level is fixed at 75-85 dB.
Default: ON
Disables/enables old position alarm, which alerts
ON
OFF
the operator when position data is older by the
number of hours or minutes set in the Position
or
Older field.
to set.
AUTO ACK
DISTRESS
2187.5
6312.0
4207.5
16804.5
12577.0
Warning
for 8414.5
ROUTINE
old position!
2177.0
6331.0
4219.5
12657.0
16903.0
8436.5
35˚00.000N 135˚00.000E 23:59
22
VOLUME
WATCH KEEPING
Alarm setup
****
***
INTERNAL AUDIO ALARM
RCVD CALL
OLD POSITION
POSITION OLDER
: ON
: ON
: 4.0 H
AUTO ACK
DISTRESS
2187.5
6312.0
4207.5
12577.0
16804.5
8414.5
ROUTINE
2177.0
6331.0
4219.5
12657.0
16903.0
8436.5
35˚00.000N 135˚00.000E 23:59
22
VOLUME
WATCH KEEPING
EXT ALARM : DSTRS/URG
Default: ON
4.0
3.0
2.0
1.0
0.5
or
to set.
Alarm is output when position is older by the
number of hours set here.
Note: Authorities require that position be
updated at least every four hours.
Default: DSTRS/URG
Sets type of message to be output to the
DSTRS/URG
ROUTINE
IC-303 incoming Indicatior.
ALL
OFF
7-2
DSTRS/URG: Distress or urgency
message output upon
receipt.
ROUTINE:
Routine message output
upon receipt.
ALL:
All messages output.
OFF:
No output.
7.3
Auto Ack Menu
The Auto Ack menu enables/disables automatic acknowledgement of individual, position and
polling messages. Press the [#/SETUP] key, select AUTO ACK and press the [ENT] key to
display the Auto Ack setup menu. See the next page for the Auto Ack menu.
Comply type, automatic
acknowledge
ABLE
UNABLE
AUTO ACK
Can send acknowledge
automatically
Cannot send automatic
acknowledge
MANUAL ACK
Can send acknowledge manually
Cannot send manual
acknowledge
7-3
Default: ABLE
ABLE
UNABLE
or
to set.
Choose ABLE or UNABLE as automatic
acknowledgement reply to Individual, Position
and Polling messages.
[ENT] key
Note: Automatic acknowledge is automatically
disabled when Rx message contains error,
as required by law. Further, automatic
acknowledge is disabled in case of OFF
HOOK.
Automatic acknowledge of Position or
Polling request is not available when
UNABLE is selected.
Default: NO REASON
** Auto ack setup **
COMPLY TYPE
: ABLE
UNABLE REASON :
NO REASON GIVEN
POSITION CALL
POLLING CALL
[ENT] key
NO REASON
BUSY
EQUIP DISABLED
MODE NOT USABLE
CH NOT USABLE
or
to set.
Sets reason for UNABLE.
Note: This menu is the same as manual
acknowledgement. EQUIPMENT
DISABLED is shown in messages when
EQUIP DISABLED is selected.
: OFF
: ON
[ENT] key
Default: ON
ON
OFF
[ENT] key
or
to set.
Overrides/follows AUTO ACK setting
in case of position.
OFF: Disables automatic
acknowledgement of position
request.
ON: Enables automatic
acknowledgement of position
request.
Default: ON
ON
OFF
or
to set.
7-4
Overrides/follows AUTO ACK setting
in case of polling.
OFF: Disables automatic
acknowledgement of polling
request.
ON: Enables automatic
acknowledgement of polling
request.
7.4
Erase File Menu
The Erase File menu separately erases the entire contents of the received ordinary log, received
distress log, transmitted log, send messages and user channels. Press the [#/SETUP] key,
select ERASE FILE and press the [ENT] key to display the Erase File menu. Select the item to
erase and press the [ENT] key.
**** Erase file ****
RCVD ORDINARY LOG?
RCVD DISTRESS LOG?
TRANSMITTED LOG?
SEND MESSAGE?
USER CHANNEL?
7.5
To cancel, press [ENT] or [CANCEL].
[ENT] key
ERASE
XXXXXXXXXXXXXXXXX.
ARE YOU SURE?
YES NO
Item selected for erasure
appears in 2nd row.
To erase, select YES with
and press [ENT].
Message Menu
The Message menu prepares and stores messages for later transmission. Press the [#/SETUP]
key, select MESSAGE and press the [ENT] key to display the Message menu. For further details
see Chapter 6.
7-5
7.6
Position Menu
Position and time are entered (automatically or manually) on the Position menu. Manually enter
position and time when the DSC-60 is not interfaced with EPFS or the EPFS is not working.
Press the [#/SETUP] key, select POSITION and press the [ENT] key to display the Position
menu. For further details see Paragraph 2.10 “Manual Input of Position and Time” on page 2-10.
7.7
Print Out Menu
The Print Out menu enables/disables automatic printing of transmitted and received messages
and the results of the daily test. Press the [#/SETUP] key, select PRINT OUT and press the
[ENT] key to display the Print Out menu.
Default: MANUAL
MANUAL
AUTO
[ENT] key
Select AUTO to automatically print
transmitted messages.
or
to set.
* Print out setup *
Default: MANUAL
XMTD CALL : MANUAL
RCVD CALL : AUTO
DAILY TEST : MANUAL
[ENT]
key
MANUAL
AUTO
Select AUTO to automatically print
received messages.
or
to set.
[ENT] key
Default: MANUAL
MANUAL
AUTO
or
to set.
7-6
Select AUTO to automatically print
results of Daily Test.
7.7.1
Sample printouts
Printing can be done automatically or manually. For manual printing, press the [8/PRINT] key.
Note that messages comprised of more than one page (for example, received messages) are
printed out in their entirety.
* Received message at JAN-08-1999-16:10:12 *
FORMAT
SELF-IDENTITY
NATURE OF DISTRESS :
DISTRESS COORDINATES:
DISTRESS TELECOMMAND:
END OF SEQUENCE
ERROR-CHECK
DSC FREQUENCY
DISTRESS CALL
987654321
UNDESIGNATED DISTRESS
NO INFORMATION
J3E TELEPHONE
EOS
OK
TX: 2187.5 kHz
RX: 2187.5 kHz
Sample Received Message
Printout (Distress)
* Received message at JAN-08-1999-16:10:12 *
FORMAT
ADDRESS
CATEGORY
SELF-IDENTITY
1st TELECOMMAND
2nd TELECOMMAND
WORKING FREQUENCY
END OF SEQUENCE
ERROR-CHECK
DSC FREQUENCY
INDIVIDUAL CALL
111660000
ROUTINE
987654321
J3E TELEPHONE
NO INFORMATION
NO INFORMATION
ACK. RQ
OK
Sample Received Message
Printout (Individual)
TX: 2177.0 kHz
RX: 2177.0 kHz
*************** Send message *************
FORMAT
ADDRESS
CATEGORY
SELF-IDENTITY
1st TELECOMMAND
2nd TELECOMMAND
WORKING FREQUENCY
END OF SEQUENCE
ERROR-CHECK
DSC FREQUENCY
INDIVIDUAL CALL
111660000
ROUTINE
987654321
J3E TELEPHONE
NO INFORMATION
NO INFORMATION
ACK. RQ
OK
Sample Send Message
Printout (Individual)
TX: 2177.0 kHz
RX: 2177.0 kHz
*Transmitted message at JAN-08-1999-16:10:12 *
FORMAT
ADDRESS
CATEGORY
SELF-IDENTITY
1st TELECOMMAND
2nd TELECOMMAND
WORKING FREQUENCY
END OF SEQUENCE
ERROR-CHECK
DSC FREQUENCY
INDIVIDUAL CALL
987654321
ROUTINE
111660000
J3E TELEPHONE
NO INFORMATION
NO INFORMATION
ACK. RQ
OK
Sample Transmitted Message
Printout (Individual)
TX: 2177.0 kHz
RX: 2177.0 kHz
Note: Messages are not framed in actual printouts.
7-7
7.8
Scan Freq Menu
The Scan Freq menu determines which DSC routine and distress frequencies to scan. Follow the
instructions below to select/deselect DSC routine and distress frequencies to scan.
7.8.1
Distress frequencies
1. Press the [#/SETUP] key, select SCAN FREQ and press the [ENT] key to display the SCAN
FREQ menu.
Scan freq setup
**
ROUTINE
DISTRESS
F1
F2
F3
F4
F5
F6
: 2M-INTL
: 4M-INTL
: 6M-INTL
: 8M-INTL
: 16M-INTL
: 25M-INTL
2M
4M
6M
8M
12M
16M
FIXED
FIXED
ON
FIXED
ON
OFF
2. Press  to shift the cursor to the DISTRESS column.
3. Select the frequency to process and press the [ENT] key. For example, select 4 MHz.
setup
** Scan freqDISTRESS
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
2M
4M
6M
8M
12M
16M
FIXED
ON
ON
ON
OFF
FIXED
ON
OFF
4. Select ON or OFF as appropriate and press the [ENT] key.
5. Press the [CANCEL] key twice to return to the DSC standby screen.
Note: Regulations require that 2 MHz and 8 MHz be watched continuously. These frequencies
cannot be turned off.
7-8
7.8.2
1.
Routine frequencies
Press the [#/SETUP] key, select SCAN FREQ and press the [ENT] key to display the SCAN
FREQ menu.
setup
** Scan freqDISTRESS
ROUTINE
F1 : 2M-INTL
F2 : 4M-INTL
F3 : 6M-INTL
F4 : 8M-INTL
F5 : 16M-INTL
F6 : 25M-INTL
2.
2M
4M
6M
8M
12M
16M
FIXED
FIXED
ON
FIXED
ON
OFF
Select the frequency to process and press the [ENT] key. For example, select 2 MHz.
setup
**OFFScan freqDISTRESS
ROUTINE
F1
F2
F3
F4
F5
F6
3.
: 22M-INTL
MHZ
: 42M-USR3
MHZ
: 64M-INTL
MHZ
: 88M-INTL
MHZ
: 16M-LCL1
: 25M-LCL2
2M
4M
6M
8M
12M
16M
FIXED
ON
ON
FIXED
ON
OFF
Use
to scroll
the menu.
12 MHZ
16 MHZ
22 MHZ
25 MHZ
OTHER
Press the [ENT] key, and the display looks something like the one below.
** Scan freq setup *
ROUTINE
DISTRESS
F1INTL
: 2M-INTL
2M : FIXED
:T12577.5/R12657.0
4M : ON
F2LOCAL1
: 2M-USR3
:T12578.0/R12657.5
6M : ON
F3LOCAL2
: 4M-INTL
:T12578.5/R12658.0
8M : FIXED
F4USER
: 8M-INTL
CH1 :T12345.0/R12345.0
12M : ON
F5 : 16M-LCL1
16M : OFF
F6 : 25M-LCL2
4.
Select frequency desired and press the [ENT] key.
5.
Press the [CANCEL] key twice to return to the DSC standby screen.
7-9
7.9
User CH Menu
The User CH menu allows registration of user Tx and Rx channels, where permitted by the
Authorities. Follow the instructions below to register user channels.
CAUTION
FURUNO will assume no responsibility
for the disturbance caused by the
unlawful or improper setting of user
channels.
1. Press the [#/SETUP] key, select USER CH and press the [ENT] key to display the User ch
entry menu.
ch entry
*** User
3 MODE:
TEL
4CH: **
2-01
0201.
0202.
0203.
0204.
0205.
56
TX:
TX:
TX:
TX:
TX:
2111.5
2222.0
2333.5
2444.0
2555.5
RX:
RX:
RX:
RX:
RX:
2111.5
2222.0
2333.5
2444.0
2555.5
256 channels may be registered, and each mode has its
own channels.
Band and channel no. appear to right of "CH."
Band no. setting range is 0-29 and band channel no. range
is 00-99. When the full 256 channels have been entered no
more channels can the entered. However, only four DSC
channels can be registered per band.
2. Press  to select MODE and press the [ENT] key.
***
3 MODE:
User ch entry
TEL
TEL
0201. TX:NBDP
2111.5
0202. TX:DSC
2222.0
0203. TX: 2333.5
0204. TX: 2444.0
0205. TX: 2555.5
56
4CH: **
2-01
RX:
RX:
RX:
RX:
RX:
2111.5
2222.0
2333.5
2444.0
2555.5
3. Select appropriate mode and press the [ENT] key.
4. Press  to select CH and press the [ENT] key.
User ch entry
*** NBDP 4CCHH : :0**
3MODE:
−2-01
00
0201.
0202.
0203.
0204.
0205.
56
7-10
TX:
TX:
TX:
TX:
TX:
2101.5
2202.0
2303.5
2404.0
2505.5
RX:
RX:
RX:
RX:
RX:
2101.5
2202.0
2303.5
2404.0
2505.5
5. Key in channel no. and press the [ENT] key. For example, press [1], [2], [3], [4] and [ENT] to
enter channel 1234. The channel selected is shown in black on white characters at the top of
the screen.
User ch entry
*** NBDP 4CH: 12-40
**
3 MODE:
01234.
01240.
01241.
01242.
01250.
56
TX:
0.0
TX: 12666.0
TX: 12777.5
TX: 12999.5
TX: 12100.0
RX:
0.0
RX: 13666.0
RX: 13777.5
RX: 13999.5
RX: 13100.0
6. Press the [ENT] key to enter Rx and Tx frequencies. For example, enter 12345.5 kHz as the
Tx frequency and 13456.0 kHz as the Rx frequency.
User ch entry
*** NBDP 4CH: 12-40
**
3 MODE:
01234.
01240.
01241.
01242.
01250.
56
TX: 12345.5
TX: 12666.0
TX: 12777.5
TX: 12999.5
TX: 12100.0
RX: 13456.0
RX: 13666.0
RX: 13777.5
RX: 13999.5
RX: 13100.0
7. The display shows the information entered. Using the examples mentioned in this procedure,
Tx frequency 12345.5, Rx frequency 13456.0 are registered to channel 1234.
*** NBDP 4CH: 12-34
**
3 MODE:
User ch entry
01234.
01240.
01241.
01242.
01250.
56
TX: 12345.5
TX: 12666.0
TX: 12777.5
TX: 12999.5
TX: 12100.0
RX: 13456.0
RX: 13666.0
RX: 13777.5
RX: 13999.5
RX: 13100.0
7-11
7.10
Volume Menu
The Volume menu enables/disables key beep (acknowledges correct key input) and adjusts the
volume of the handset, ordinary alarm and distress/urgency alarm. Press the [#/SETUP] key,
select VOLUME and press the [ENT] key to display the Volume menu.
Default: ON
ON
OFF
or
to set.
Turns on/off beep generated when
keyboard is operated.
Note : Do not confuse keyboard beep
(single beep) with ACK beep
(three beeps).
[ENT] key
Default: 32
*** Volume setup ***
KEY CLICK
HANDSET
ORDINARY ALARM
DISTRESS ALARM
: ON
: 40
: 30
: 63
VOLUME (8~63)
[ENT]
key
4 40
or
to set.
4 30
or
to set.
Sets volume of handset.
[ENT] key
Default: 32
VOLUME (8~63)
[ENT] key
Sets loudness of Safety/Ships Business/Routine
alarm and old position alarm.
Default: 63
VOLUME (8~63)
4 63
or
to set.
Sets loudness of Distress/Urgency alarm and
Distress Alert alarm.
7-12
7.11
Test Menu
The Test menu provides test facilities (including tone test) for the service technician. This menu
cannot be accessed by the operator.
Test function
***
**
TONE
AF PCB
BK
REMOTE
EXT ALARM
EXT ALERT
CONT PCB
PANEL PCB
RX PCB
TX TEST
PROTECTION: ON
7.12
System Menu
The System menu sets up the equipment and is for use by service technicians. This menu
cannot be accessed by the operator. However the operator can view the settings by using  and
.
System setup
***
***
MMSI: 123456789 FIXED
WATCH RCVR
LINE OUT
TX-KEY TIMING
RT PORT
: MF/HF
+0.0DBM
: AUTO
: MIF3
PROTECTION: ON
6 5
Use
or
to switch.
System setup
***
***
REMOTE STATION: ON
NBDP PORT
: OFF
LANGUAGE: ENGLISH
PROTECTION: ON
7-13
8. CHECKING, MAINTENANCE
WARNING
Do not open the equipment.
Hazardous voltage which can
cause electrical shock exists
inside the equipment. Only
qualified personnel should
work inside the equipment.
8.1
Daily Test
Authorities require that the equipment be checked daily for proper operation to ensure that it will
function properly in the event of distress. Set the frequency of the radiotelephone to other
than 2182 kHz. Execute the daily test as below.
1. At the DSC standby screen or radiotelephone setting screen, press the [3/TEST] key to start
the test.
2. After several seconds the test results appear followed by the audio alarm. OK denotes
normal operation, and NG (No Good), error. For NG (No Good) contact your dealer for
advice.
test
**DSC-60: daily
**
MAIN CPU
OK VER.XX*
MODEM
RCVR1
RCVR2
REMOTE RT
REMOTE DP
: OK VER.XX*
: OK
: OK
: OK FS1562
: OK DP6
Alarm:
Distress alarm sounds for two seconds after completion
of test.
MAIN CPU:
ROM/RAM test executed and version no. displayed.
MODEM:
DSP ROM and DSC signal loopback tests executed and
version no. displayed.
RCVR1:
Distress/safety watch received tested.
RCVR2:
Routine watch receiver tested.
REMOTE RT:
CAID of MIF command sent and received. (System
setting RP PORT must be set for MIF otherwise
nothing appears.)
REMOTE DP:
CAID of MIF command sent and received. (System
setting NBDP PORT must be set for MIF otherwise
nothing appears.)
* XX = Version number
8-1
3. If auto printing is active the test results are printed. To manually print results, press the
[8/PRINT] key. Below is a sample test results printout.
* DSC-60 daily test *
AUG-14-1999-15:24
MMSI:
123456789
MAIN CPU: OK VER.01
MODEM:
OK VER.02
RCVR1:
OK
RCVR2:
OK
REMOTE RT: OK FS1562
REMOTE DP: OK DP6
4. Press the [CANCEL] key to quit the test and return to the previously used screen.
8.2
Maintenance
Regular maintenance is necessary for continued performance. Following the procedures below
will help keep the equipment in top operating condition.
8.2.1
Preventive maintenance
• Check the following points periodically to ensure proper performance.
• Check that each connector is firmly connected and is clean.
• Check the earth terminal for corrosion. If corroded, clean.
8.2.2
Cleaning
Dust on the display unit and display screen may be removed with a soft cloth. Do not use
commercial cleaners to clean the display unit - they can remove paint and markings.
8-2
8.3
Simple Troubleshooting
The table below provides common problems and the means with which to restore normal
operation. If normal operation cannot be restored do not attempt to check inside the equipment.
Any servicing should be referred to a qualified technician.
Problem
Power cannot be
turned on.
Probable cause
Remedy
• Mains switchboard may be off.
• Turn on the mains switch
• DC overvoltage input.
• Check supply voltage.
• Battery may have discharged, or • Recharge battery and tighten battery
poor contact at terminals.
terminals.
Display indications
do not appear but
key lamps are lit.
• Contrast is too low.
• Press the [9/
Power is on but no
sound from
loudspeaker.
• Loudspeaker is off.
• Operate the [7/ ] key to turn on the loud-
8.4
] key followed by or  to
adjust the contrast.
speaker.
Error Messages
The table below shows error messages and their meanings.
Error messages
Error message
Meaning
Remedy
EPFS error
No position data from navigator
for one minute.
Press the [CANCEL] key to silence alarm.
Check the navigator. If it is malfunctioning
manually enter position.
Warning: Update
position
Position data is older by the
amount of time preset on the
Alarm setup menu.
Press the [CANCEL] key to silence alarm.
Reenter position on the Position menu.
8-3
8.5
Test Call
This function sends a test signal over one of six distress and safety frequencies to a coast
station. For that reason, it should not be executed unnecessarily.
1. Press the [CALL] key at the DSC standby screen, and press the [ENT] key to open the CALL
TYPE menu.
***
Send message
***
INDIVIDUAL
: PSTN
Test CALL
TEST CALL
: 00------ALL SHIPS
: GROUP
Safety CALL
: AREA
2187.5
kHz
CALL
POSITION
CALL TYPE
STATION ID
PRIORITY
COM TYPE
COM TYPE
DSC FREQ
If this part of the menu
appears, use
to scroll.
5POLLING
NEUTRAL
MEDICAL
RELAY ALL
RELAY SEL
DISTRESS
2. Use  or  to select TEST CALL and press the [ENT] key.
3. Press the [ENT] key to open the COAST ID menu.
*** Send message ***
CALL TYPE
COAST ID
: TEST
000000000
PRIORITY
: SAFETY
DSC FREQ
2187.5 KHZ
GO TO ALL VIEW
4. Key in the ID of the coast station ID (nine digits) to where to send the test call and press the
[ENT] key.
5. Press the [ENT] key to open the DSC FREQ menu. (Note that PRIORITY is automatically
selected to SAFETY.)
*** Send message
***
2187.5
CALL TYPE
COAST ID
PRIORITY
DSC FREQ
: Test
4207.5
: 001234567
6312.0
:8414.5
Safety
12577.0
kHz
16804.5
KHZ
MANUAL
VIEW
8-4
6. Select an appropriate frequency and press the [ENT] key, and the display changes as below.
Send message
***
***
CALL TYPE
: TEST
COAST ID
PRIORITY
: 001234567
: SAFETY
DSC FREQ
2187.5 KHZ
GO TO ALL VIEW
7. Press the [CALL] key to send the test call (transmission time: 6-8 sec.). The display shows
"Test call in progress!" while the test call is being transmitted.
Test
call in progress!
TO COAST
SAFETY
001234567
DSC FREQ
TIME TO GO
2187.5 KHZ
8S
8. After the test call has been sent, the following message appears.
Waiting for test
acknowledgement.
FROM COAST : 001234567
SAFETY
DSC FREQ
TIME TO GO :
2187.5 KHZ
4M12S
9. One of the following displays appears. (“No response! Try calling again?” appears when the
timer counts down to zero, meaning no response from coast station.)
Test acknowledge
call received.
FROM COAST:
SAFETY
NO INFORMATION
001234567
No response!
Try calling again?
FROM COAST:
SAFETY
DSC FREQ
STOP ALARM
Test acknowledge received
001234567
2187.5 KHZ
CALL AGAIN
No response to test call
10. Do one of the following depending on the message shown in step 9.
8-5
Test acknowledge call received
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display changes as
below.
* Received message
ECC : OK
JUL-23-1999-23:59
TEST ACKNOWLEDGEMENT
FROM COAST : 001234567
SAFETY
NO INFORMATION
GO TO ALL VIEW
No response! Try calling again?
Press the [ENT] key (the display shown in step 6 appears) followed by the [CALL] key to re-send
the test call, or press the [CANCEL] key to return to the DSC standby screen.
8-6
APPENDIX
Menu Tree
[SETUP] key
ALARM
INTERNAL AUDIO ALARM
RCVD CALL (ON, OFF)
OLD POSITION (ON, OFF)
POSITION OLDER (4.0, 3.0, 2.0, 1.0, 0.5 hr)
EXT ALARM (DSTRS/URG, ROUTINE, ALL, OFF)
AUTO ACK
COMPLY TYPE (ABLE, UNABLE)
UNABLE REASON (NO REASON, BUSY, EQUIP DISABLED,
MODE NOT USABLE, CH NOT USABLE)
POSITION CALL (ON, OFF)
POLLING CALL (ON, OFF)
ERASE FILE
RCVD ORDINARY LOG
RCVD DISTRESS LOG
TRANSMITTED LOG
SEND MESSAGE
USER CHANNEL
Default settings
in boldface italic.
MESSAGE
POSITION
INPUT TYPE (AUTO, MANUAL)
LAT
LONG
TIME
PRINT
XMTD CALL (AUTO, MANUAL)
RCVD CALL (AUTO, MANUAL)
DAILY TEST (AUTO, MANUAL)
SCAN FREQ
Selects DSC frequencies to scan.
USER CH
Registers user channels.
VOLUME
KEY CLICK (ON,OFF)
HANDSET (0-63, 32)
ORDINARY ALARM (0-63, 32)
DISTRESS ALARM (0-63, 63)
TEST (For technicians)
SYSTEM (For technicians)
[LOG] key
RECEIVED ORDINARY
RECEIVED DISTRESS
TRANSMITTED
A-1
DSC Frequency Table
Tx (kHz)
Rx (kHz)
Remarks
File Name
2187.5
2187.5
4207.5
4207.5
6312.0
6312.0
8414.5
8414.5
12577.0
12577.0
16804.5
16804.5
458.5
455.5
INTL-0.4M
2189.5
2177.0
INTL-2M
4208.0
4219.5
INTL-4M
6312.5
6331.0
INTL-6M
8415.0
8436.5
12577.5
12567.0
16805.0
16903.0
INTL-16M
18898.5
19703.5
INTL-18M
22374.5
22444.0
INTL-22M
25208.5
26121.0
INTL-25M
4208.5
4220.0
LOCAL1-4M
6313.0
6331.5
LOCAL1-6M
8415.5
8437.0
LOCAL1-8M
12578.0
12657.5
17805.5
16903.5
18899.0
19704.0
LOCAL1-18M
22375.0
22444.5
LOCAL1-22M
25209.0
26121.5
LOCAL1-25M
4209.0
4220.5
LOCAL2-4M
6313.5
6332.0
LOCAL2-6M
8416.0
8437.5
LOCAL2-8M
12578.5
12658.0
16806.0
16904.0
18899.5
19704.5
LOCAL2-18M
22375.5
22445.0
LOCAL2-22M
25209.5
26122.0
LOCAL2-25M
Distress and
Safety Frequencies
International
Frequencies
Local-1
Frequencies
Local-2
Frequencies
A-2
INTL-8M
INTL-12M
LOCAL1-12M
LOCAL1-16M
LOCAL2-12M
LOCAL2-16M
SPECIFICATIONS OF DSC/WATCH RECEIVER
DSC-60
1.
DSC TERMINAL
(1) Line Out:
0 dBm (adjustable between –10 dBm and +10 dBm),
600 ohms, balanced
2.
(2) Line In:
-10 to +10 dBm, 600 ohms, balanced
(3) Frequency Shift:
Mark; 1615 Hz, Space; 1785 Hz
(4) Baud Rate:
100 baud’s ±30 x 10
(5) Protocol:
Complies with ITU-R Rec.493‐9, 541‐8, 1082-1
-6
GMDSS DSC WATCH KEEPING RECEIVER
(1) Receiving Frequency
For MF spec:
2187.5 kHz
For MF/HF spec:
2187.5 kHz, 4207.5 kHz, 6312 kHz, 8414.5 kHz,
12577 kHz and 16804.5 kHz
(2) Class of Emission:
F1B, J2B
(3) Frequency Stability:
Within ±10 Hz
(4) Intermediate Frequency: 1st: 54455 kHz,
(5) Selectivity:
2nd: 455 kHz
-6 dB : 270 Hz or more
-30 dB: within ±380 Hz
-60 dB: within ±550 Hz
3.
(6) RF Input Impedance:
50 ohms
(7) Receiving Sensitivity:
Better than 0 dBµ (at error rate within 1%)
(8) Warming-up Time:
1 minute (oven 30 minutes)
GENERAL WATCH KEEPING RECEIVER (option)
(1) Receiving Frequency
1.6 MHz to 27.5 MHz
(2) Class of Emission:
F1B, J2B
(3) Frequency Stability:
Within ±10Hz
(4) Intermediate Frequency: 1st: 54455 kHz,
(5) Selectivity:
2nd: 455 kHz
-6 dB : 270 to 300Hz
-30 dB: within ±380Hz
-60 dB: within ±550Hz
(6) RF Input Impedance:
50 ohms
(7) Receiving Sensitivity:
Better than 0 dBµ (at error rate within 1%)
(8) Warming-up Time:
1 minute (oven 30 minutes)
SP - 1
4.
MF/HF SSB TRANSCEIVER REMOTE STATION
(1) Line Out:
0 dBm, 600 ohms, balanced
(2) Line In:
0 dBm, 600 ohms, balanced
(3) AF Input (Microphone):
-46 dBm, 600 ohms, unbalanced
(4) AF Output (Loudspeaker):
(Handset):
5.
3 W, 4 ohms
1 mW, 200 ohms
DISPLAY
(1) LCD Unit:
120 x 64 dots
(2) Characters
20 characters x 8 lines (1 character: 5 x 7 dot) max.
20 characters x 10 lines (1 character: 5 x 5 dot) max.
6.
(3) Back-light:
Yellow, 8 tones
(4) Contrast:
64 tones
I/O DATA
(1) Nav. Data Input:
IEC61162-1, current loop; 1 pair/port
(2) DMC:
IEC61162-1/RS232C or
DMC OUT/IN/CTR H/C; 3 pairs/port
(3) Received Call Output:
RCV BZ OUT/IN/CTR; 3 pairs/port
(4) NBDP:
IEC61162-1/RS232C
(5) Printer:
Centronics (parallel)
(6) RT (MF/HF Transceiver): IEC61162-1/RS232C,
Line in: 0dBm, 600 ohms,
Line out: 0dBm, 600 ohms,
and other control signals
7. ENVIRONMENTAL CONDITION
(1) Temperature:
-15°C to +55°C
(2) Relative Humidity:
93% ( 40°C)
(3) Category of Equipment Unit
Display Unit:
Protected from the weather
8. POWER SUPPLY
24VDC (backed up by battery), 1 A, less than 24 W
9. COLOR
Panel: N3.0 (not changeable)
Cabinet: 2.5GY5/1.5
SP - 2
INDEX
#/SETUP key .................................................. 7-1
*/FILE key ....................................................... 6-8
0/LOG key ...................................................... 5-1
1/ RT/2182 key ............................................... 2-3
2/DSC key ...................................................... 2-3
3/TEST key..................................................... 8-1
4/IntCom key .................................................. 2-8
5/ACK key....................................................... 2-7
6/SCAN key .................................................... 2-6
7/ key........................................................... 2-5
8/PRINT key ................................................... 7-7
9/
key ......................................................... 2-4
Alarm menu .................................................... 7-2
All ships call
receiving ..................................................... 4-3
sending ....................................................... 4-1
Auto ack menu................................................ 7-3
Automatic acknowledge.................................. 2-7
Backlighting adjustment ................................. 2-4
Channel selection ......................................... 2-12
Cleaning ......................................................... 8-2
Contrast adjustment ....................................... 2-4
Control description.......................................... 2-1
Daily test......................................................... 8-1
Distress alert
receiving ..................................................... 3-7
sending ....................................................... 3-1
Distress relay
all ships (MF/HF band) ............................. 3-13
receiving ................................................... 3-21
DSC frequency setting.................................... 4-8
DSC frequency table ......................................A-2
Erase file menu............................................... 7-5
Error messages .............................................. 8-3
Frequency selection ..................................... 2-13
Geographic area call
receiving ................................................... 4-24
sending ..................................................... 4-21
Group call
receiving ................................................... 4-20
sending ..................................................... 4-18
Indications ...................................................... 2-3
Individual call
automatic acknowledge............................ 4-13
manual acknowledge................................ 4-15
sending....................................................... 4-4
Intercom ......................................................... 2-8
Log file
description .................................................. 5-1
opening....................................................... 5-4
Maintenance................................................... 8-2
Medical transport call
receiving ................................................... 4-28
sending..................................................... 4-27
Menu tree ....................................................... A-1
Message menu............................................... 7-5
Mode selection ............................................. 2-12
Neutral craft call
receiving ................................................... 4-26
sending..................................................... 4-25
Polling call
receiving ................................................... 4-32
sending..................................................... 4-29
Position call
other ship requests your position ............. 4-37
requesting other ship’s position................ 4-35
Position entry (manual) ................................ 2-10
Position menu................................................. 7-6
Power selection ............................................ 2-13
POWER switch............................................... 2-3
Print out menu ................................................ 7-6
PSTN call
charge information.................................... 4-48
receiving ................................................... 4-47
sending..................................................... 4-40
Remote control ............................................. 2-12
Scan freq menu .............................................. 7-8
Scan frequency setup..................................... 7-9
Scanning ........................................................ 2-6
Send message files
geographic area call ................................... 6-5
group call.................................................... 6-4
individual call .............................................. 6-1
PSTN call ................................................... 6-6
sending....................................................... 6-8
Setup menu .................................................... 7-1
Specifications ...............................................SP-1
Index-1
System menu................................................ 7-13
Test call........................................................... 8-4
Test menu ..................................................... 7-13
Time entry (manual) ..................................... 2-10
Troubleshooting .............................................. 8-3
Tuning........................................................... 2-14
User CH menu.............................................. 7-10
Volume menu ............................................... 7-12
Working frequency setting.............................. 4-6
Index-2
C
Yo u r L o c a l A g e n t / D e a l e r
9-52, Ashihara-cho,
N i s h i n o m i ya , J a p a n
Te l e p h o n e :
Te l e f a x:
0 7 9 8 - 6 5 - 2 111
0798-65-4200
A l l r i ght s r es er ved.
Printed in Japan
P U B . N o . O ME - 5 6 2 8 0
(DAMI)
DSC-60
FIRST
EDITION

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2000:01:14 10:39:22
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:01:14 15:57:39+09:00
Page Count                      : 39

EXIF Metadata provided by EXIF.tools