Furuno USA 9ZWRTR088A Marine Radar User Manual Cover

Furuno USA Inc Marine Radar Cover

op man part 3

Download: Furuno USA 9ZWRTR088A Marine Radar User Manual Cover
Mirror Download [FCC.gov]Furuno USA 9ZWRTR088A Marine Radar User Manual Cover
Document ID1456395
Application IDKNrOyGWEtwNIwS6HPZi1ww==
Document Descriptionop man part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize129kB (1612540 bits)
Date Submitted2011-04-28 00:00:00
Date Available2011-06-03 00:00:00
Creation Date2011-04-28 11:36:23
Producing SoftwareAdobe PDF library 8.00
Document Lastmod2011-04-28 11:36:45
Document TitleCover
Document CreatorAdobe Illustrator CS3

4. AIS OPERATION
4. Use the Cursorpad (S) to select [Yes] and press the ENTER key. All lost targets
symbols are erased from the screen and the long beep sounds.
5. Press the MENU key to close the menu.
4.15
Symbol Color
You can select the AIS symbol color among Green, Red (unavailable in the [IEC] or
[Russian-River] purpose), Blue, White or Black.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [AIS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Color] and press the ENTER key.
Color options
4. Use the Cursorpad (S or T) to select the color and press the ENTER key.
5. Press the MENU key to close the menu.
Note: Symbols can not be shown in the same color as the background color.
4.16
How to Ignore Slow Targets
You can prevent activation of the CPA/TCPA alarm against AIS targets that are traveling at a speed lower than set here. The AIS symbols are not affected by this setting.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [AIS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Ignore Slow Targets] and press the ENTER
key.
Ignore Slow Targets setting window
4. Use the Cursorpad (S or T) to select speed (0.0 - 9.9 kn) and press the ENTER
key.
5. Press the MENU key to close the menu.
4-10
5.
GPS OPERATION
If the FURUNO GPS Navigator GP-320B is connected to this radar, you can set GP320B from this radar.
5.1
Navigator Mode
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Mode] and press the ENTER key.
Mode options
4. Use the Cursorpad (S or T) to select [GPS] or [WAAS] then press the ENTER
key.
5. Press the MENU key to close the menu.
5.2
Datum
Select the type of datum which matches the paper charts you use for navigation. Select [WGS-84] if the radar is connected to an AIS Transponder.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Datum] and press the ENTER key.
Datum options
4. Use the Cursorpad (S or T) to select the type of datum and press the ENTER
key. If you select [WGS-84] or [Tokyo], go to step 7. If you select [Other], go to the
next step.
5. Use the Cursorpad (S or T) to select [Datum No] and press the ENTER key.
Datum No setting window
6. Use the Cursorpad (S or T) to select the datum number and press the ENTER
key. (The setting range is 001 - 192 and 201 - 254. Refer to the appendix 2 “GEODETIC CHART LIST”.)
7. Press the MENU key to close the menu.
5-1
5. GPS OPERATION
5.3
WAAS Setup
Geostationary satellites, the type used with WAAS, provide more accurate position
data when compared to GPS. These satellites can be tracked automatically or manually. Auto tracking automatically searches for the best geostationary satellite from your
current position.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [WAAS] and press the ENTER key.
WAAS options
4. Use the Cursorpad (S or T) to select [Auto] or [Manual] then press the ENTER
key. If you select [Auto], go to step 7. If you select [Manual], go to the next step.
5. Use the Cursorpad (S or T) to select [WAAS No] and press the ENTER key.
WAAS No setting window
6. Use the Cursorpad (S or T) to select WAAS number and press the ENTER key.
(The setting range is 120 - 158. Refer to the following table.)
7. Press the MENU key to close the menu.
Provider
WAAS
EGNOS
MSAS
5-2
Satellite type
Longitude
Satellite No.
Inmarsat-3-F4 (AOR-W)
142°W
122
Inmarsat-3-F3 (POR)
178°E
134
Intelsat Galaxy XV
133°W
135
TeleSat Anik F1R
107.3°W
138
Inmarsat-3-F2 (AOR-E)
15.5°W
120
Artemis
21.5°E
124
Inmarsat-3-F5 (IOR-W)
25°E
126
MTSAT-1R
140°E
129
MTSAT-2
145°E
137
5. GPS OPERATION
5.4
Satellite Monitor
The Satellite Monitor provides the information about GPS and WAAS satellites. See
your GPS navigator's owner's manual for detailed information.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Satellite Monitor] and press the ENTER
key.
DOP (Dilution of Precision, 0.0 - 99.0)
GPS mode
2D, 3D,
W2D, W3D
SNR of tracked GPS satellites
Satellites whose SNR is above
40 are used to fix position.
Satellite Monitor
North marker
Satellite No.
DOP
1.5
W3D
GPS
40
50
01
01
31
GPS satellite no.*
24
12
13
13
12
18
01
WAAS satellite
SNR
30
31
06
19
06
07
Satellites in ring
have elevation
angle of 5°
19
09
18
07
08
09
24
16
08
Satellites in ring
have elevation
angle of 45°
16
Altitude
15m
[MENU]: Close MENU
* Satellites used to fix
position are shown in red.
13
WAAS
122
[ENTER]: Close this window
Altitude of
GPS antenna
from sea
surface
SNR of tracked
WAAS satellite
Satellite monitor
4. Press the ENTER key to close only the satellite monitor display.
5-3
5. GPS OPERATION
5.5
Cold Start
Cold start, which clears the Almanac from the GPS receiver, can be necessary in the
following conditions:
• If you have turned off the power of the GPS receiver for a long time.
• The ship has moved far away from the previous fixing position (e.g., more than 500
km).
• Other reason that prevents the receiver from finding its position within five minutes
after you turn on the power.
To do cold start, do the following:
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Cold Start] and press the ENTER key.
Cold Start options
4. Use the Cursorpad (S) to select [Yes] and press the ENTER key. After processing
cold start, the long beep sounds. (To stop cold start, press the CANCEL/HL OFF
key instead of the ENTER key.)
5. Press the MENU key to close the menu.
5-4
6.
MAINTENANCE, TROUBLESHOOTING
This chapter has information about maintenance and troubleshooting that the user
can follow to care for the equipment.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel can work
inside the equipment.
Turn off the power before you
service the antenna unit. Post
a warning sign near the power
switch not to turn on the power
while you service the antenna
unit.
Prevent the potential risk of being
struck by the rotating antenna and
exposure to RF radiation hazard.
When you work on the antenna
unit, wear a safety belt and hard
hat.
Serious injury or death can result
if a person falls from the radar
antenna mast.
NOTICE
Do not apply paint, anti-corrosive sealant
or contact spray to plastic parts or
equipment coating.
Those items contain products that can
damage plastic parts and equipment coating.
6-1
6. MAINTENANCE, TROUBLESHOOTING
6.1
Preventive Maintenance
Regular maintenance helps keep your equipment in good condition and prevents future problems. Check the items shown in the table below to help keep your equipment
in good condition for years to come.
Maintenance
Interval
Item
Check point
Remedy
When
necessary
LCD
Dust on the LCD
Remove the dust from the LCD
with the tissue paper and an LCD
cleaner. To remove dirt or salt, use
the LCD cleaner. Change the tissue paper often so as not to
scratch the LCD.
3 to 6
months
Ground terminal on
display unit
Check for tight connection and rust.
Tighten or replace as necessary.
Display unit
connectors
Check for tight connection.
Tighten if the connectors are loosened.
Exposed nuts and
bolts on the antenna unit
Check for corroded or
loosened bolts.
Clean and repaint as necessary.
Use sealing compound instead of
paint.
Antenna radiator
Check for dirt and cracks
on the radiator surface.
Clean radiator surface with freshwater-moistened cloth. Do not use
plastic solvents to clean.
6-2
6. MAINTENANCE, TROUBLESHOOTING
6.2
Fuse Replacement
The fuse on the power cable protects the equipment from overcurrent and equipment
fault. If the fuse blows, find the cause before you replace the fuse. Use the correct
fuse. A wrong fuse can damage the equipment.
WARNING
Use the correct fuse.
A wrong fuse can damage the equipment
and cause fire.
Unit
Type
Display unit
(fitted on
power cable)
6.3
Code No.
Remarks
FGB0 125V 10A PBF
000-155-826-10
12 VDC
FGB0-A 125V 5A PBF
000-155-853-10
24 VDC
Magnetron Life
When the life of the magnetron is reached, the targets do not appear on the display.
If long-range performance appears to have decreased, contact a FURUNO agent or
dealer about replacement of the magnetron.
Model
MODEL 1937
6.4
Magnetron type
E3571
Code No.
Estimated life
001-087-300
Approx. 2,000 hours
LCD Backlight Life
The life of the LCD backlight, which provides illumination for the LCD, is approximately
4,800 hours at 25°C (ambient temperature). The display brilliance cannot be raised
when the backlight has worn out. When brilliance cannot be raised, have a qualified
technician replace the backlight.
Name
Lamp holder complete set
Type
104LHS46
Code No.
000-160-949-10
6-3
6. MAINTENANCE, TROUBLESHOOTING
6.5
Simple Troubleshooting
This section provides simple troubleshooting procedures which the user can follow to
restore normal operation. If you cannot restore normal operation, do not check inside
the unit. Have a qualified technician check the equipment.
Simple troubleshooting
Problem
6-4
Remedy
You cannot turn on the power.
• Check for blown fuse.
• Check that the power connector is fastened.
• Check for corrosion on the power cable connector.
• Check for damaged power cable.
• Check battery for correct voltage output.
There is no response when a key is
pressed.
Turn off and on the power. If you do not get a
response, the key is damaged. Contact your
dealer for instructions.
The power is on and you operated the
STBY/TX key to transmit. The marks
and letters appear, but no echo appears.
Check that the antenna cable is fastened.
Tuning is correctly adjusted, but
sensitivity is poor.
Replace the magnetron. Contact your dealer.
The range is changed, but radar picture does not change.
• Try to hit the RANGE key again.
• Turn off and on the display unit.
Poor discrimination in range because
of many echoes from the waves.
Adjust A/C SEA control.
The true motion presentation is not
working correctly.
• Check that the setting of [Display Mode] in
the [Display] menu is set to [True Motion].
• Check if the heading and position data are input and correct.
The range rings are not displayed.
Check that the setting of [Rings Brill] in the
[Brill/Color] menu is set to other than [Off].
Target is not tracked correctly because of sea clutter.
Adjust A/C SEA and A/C RAIN controls.
6. MAINTENANCE, TROUBLESHOOTING
6.6
Advanced-level Troubleshooting
This section describes how to cure hardware and software troubles which the qualified
service persons must do.
Advanced-level troubleshooting
Problem
Power cannot be
turned on.
Probable cause or
check points
1) Mains voltage/polarity
2) Power supply board
Remedy
1) Correct the wiring and input
voltage.
2) Replace power supply
board.
Brilliance adjusted
but no picture.
1) SPU Board
1) Replace SPU board.
Antenna not rotating.
1) Antenna drive mechanism
1) Replace the antenna drive
mechanism.
Data and marks
not displayed in
transmit.
1) SPU board
1) Replace SPU board.
Set GAIN to maximum with A/C SEA
set at minimum.
Marks and indications appear but no
noise or echo.
1) Signal cable between antenna and display unit
2) IF amplifier
3) Video amplifier board
1) Check continuity and isolation of coaxial cable.
2) Replace IF amplifier.
3) Check coax line for fasten
connection. If connection is
good, replace SPU board.
Marks, indications
and noise appear
but no echo.
(Transmission leak
representing your
ship position is absent.)
1) Magnetron
2) Modulator board
3) SPU board
1) Check magnetron current.
2) Replace modulator board.
3) Replace SPU board.
Picture not updated or picture
freeze-up.
1) Bearing signal generator
1) Check that signal cables
are fastened.
2) Replace SPU board.
3) Turn off and on the radar.
2) SPU board
3) Video freeze-up
6-5
6. MAINTENANCE, TROUBLESHOOTING
Problem
Radar is correctly
tuned but sensitivity is poor.
Probable cause or
check points
1) [2nd Echo Rejector] is [On]
2) Dirt on radiator face
3) Deteriorated magnetron
4) Detuned MIC
Range changed
but radar picture
does not change.
Range rings are
not displayed.
6-6
1) RANGE key has faults
Remedy
1) Turn off the [2nd Echo Rejector], from the [Echo]
menu.
2) Clean radiator.
3) Check the magnetron current with the radar transmitting on 48 nm range. If the
current is below normal,
magnetron may be defective. Replace the magnetron.
4) Check MIC detecting current. If MIC detecting current is below normal value,
MIC may have become detuned.
2) SPU board
3) Video freeze-up
1) Try to operate the RANGE
key. If you can not operate
the RANGE key, replace
the keypad.
2) Replace SPU board.
3) Turn off and on radar.
1) Adjust their brilliance on the
[Brill/Color] menu.
2) SPU Board
1) Replace associated circuit
board if unsuccessful.
2) Replace SPU Board.
6. MAINTENANCE, TROUBLESHOOTING
6.7
Diagnostic Test
The diagnostic test checks the system for correct operation. This test is for use by service technicians, but the user can do this test to provide the service technician with
information.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Tests] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Self Test] and press the ENTER key.
0359246-XX.XX
0359247-XX.XX
10.1
4.2
48.1
-40
3112
123.4 °
567
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Key, buzzer,
knob cotrol
and cursorpad
check
OK
OK
XX: Program version no.
Self Test screen
Test results
• ROM, RAM: The results of the ROM and RAM test are displayed as OK or NG
(No Good).
• NMEA1, NMEA2: The results of the ports NMEA1 and NMEA2 are displayed as
OK or "- -". Ports NMEA1 and NMEA2 require a special connector to test them.
When a special connector is not connected, "- -" is shown. If "- -" is displayed
with a special connector, contact your dealer for instruction.
• APPLICATION VERSION, FPGA VERSION: The program numbers and program version numbers (XX) are displayed.
6-7
6. MAINTENANCE, TROUBLESHOOTING
• HEADING PULSE, BEARING PULSE: The results of the pulse input are displayed as OK or NG. When [Antenna Rotation] is set to [Stop], or [Watchman]
is set to [Off] in the STBY mode, this test is skipped and "- -" is shown for both
heading and bearing.
• TUNING VOLTAGE, INDICATOR VOLTAGE, ANTENNA ROTATION, ECHO
LEVEL, TRIGGER FREQUENCY: The results of measurement are displayed.
• GYRO: The current gyrocompass reading is displayed.
• TEMPERATURE: The result of the temperature test is displayed as OK or NG
and the temperature is measured and shown.
• TOTAL ON TIME, TOTAL TX TIME: The total number of hours, for which the
radar has been powered and transmitted, are displayed.
• INPUT NMEA window: The condition of all the NMEA sentences being input to
this radar are displayed as OK or "- -". "- -" means no data input. Sentences are
updated every second.
Key check
Press each key one by one. A key’s on-screen location becomes green if the key
is normal.
Buzzer check
The F1 key tests on/off for the panel buzzer or external buzzer. To stop the buzzer, press the F1 key again.
Knob control check
Rotate each control knob. The four digits below the on-screen location for the
GAIN, A/C SEA and A/C RAIN knob controls show the control position. Press
each knob. The knob corresponding on-screen circle changes in green if the knob
is normal.
Cursorpad check
Press each arrow and diagonal dot one by one. The on-screen location changes
in green if the key is normal.
4. Press the MENU key three times to escape from the test.
5. Press the MENU key to close the menu.
6-8
6. MAINTENANCE, TROUBLESHOOTING
6.8
LCD Test
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Tests] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [LCD Pattern] and press the ENTER key.
MENU
key
Black
MENU
key
White
MENU
key
Green
MENU
key
Red
MENU
key
Blue
MENU
key
Checker board design
7 tones of gray
4. Press the MENU key several times to close the menu.
Note 1: You can cancel the test at any time when you press the CANCEL/HL OFF
key.
Note 2: You can adjust the screen brilliance with the
BR
IL L
key during the test.
6-9
6. MAINTENANCE, TROUBLESHOOTING
6.9
ARPA Test
If the optional ARPA board is installed, its program number and test results (OK or NG)
are shown on the screen. [ARPA Test] menu item is inoperative with no ARPA board.
The radar must be transmitting to test ARPA function.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [Tests] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [ARPA Test] and press the ENTER key.
[ ARPA TEST ]
ROM
: OK
: OK
RAM
: 1859127XXX
ARPA VERSION
SPEED
COURSE
TRIGGER
VIDEO
BEARING PULSE
HEADING PULSE
MIN-HIT
SCAN-TIME
MANUAL-ACQ
AUTO-ACQ
FE-DATA1
FE-DATA2
OK
OK
OK
OK
OK
OK
0012
0250
03
05
0217
0023
12.3KN
287.6°
ECHO NUMBER
[No. 1] 0123
[No. 5] 0110
[No. 2] 0321
[No. 6] 0219
[No. 3] 0084
[No. 7] 0073
[No. 4] 0234
[No. 8] 0145
[MENU] x 3 : Exit
XXX: Program version no.
ARPA test
4. Press the MENU key three times to close the menu.
6-10
6. MAINTENANCE, TROUBLESHOOTING
6.10
GPS Test
You can check the FURUNO GPS receiver GP-320B interfaced with this radar for correct operation as follows:
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [GPS] and press the ENTER key.
3. Use the Cursorpad (S or T) to select [Self Test] and press the ENTER key. The
program no. and result of the test are shown, as OK or NG (No Good). When NG
appears, check the GPS receiver.
48502380XX
XX: Program version no. varies
according to equipment connected.
GPS-Self Test screen
4. Press any key to close the test screen.
5. Press the MENU key to close the menu.
6-11
6. MAINTENANCE, TROUBLESHOOTING
This page is intentionally left blank.
6-12
APPENDIX 1 MENU TREE
MENU key
Brill/Color
Echo Brill (1 - 8)
Rings Brill (Off, 1, 2, 3, 4)
Mark Brill (1, 2, 3, 4)
HL Brill (1, 2, 3, 4)
Character Brill (1, 2, 3, 4)
View Position (Left, Left-Center, Center, Right-Center, Right)
Display Color (Day, Night, Twilight, Custom)
Echo Color (Yellow, Green, Orange, Multi)
Background Color (Black, DK Blue, Blue, White)
Character Color (Green, Red, White)
Menu Transparency (Off, 1, 2, 3, 4)
Echo Color Mode (System, Custom)
Custom Echo Color
Display
Display Mode (Head Up, Course Up, North Up, True Motion, True View)
Zoom (Off, On)
Zoom Mode (Relative, True, Target)
Offcenter Mode (Manual, Custom, Auto)
Save Offcenter
Echo Area (Normal, Full Screen)
Base Text Display (Range, Mode, Alarm, Echo, EBL/VRM, +Cursor)
Data Box (Off, Nav, Target, All)
Gain/Sea/Rain Bar
STBY Display (Normal, Nav, Economy)
Echo
Gain Mode (Auto, Manual)
Sea Mode (Auto, Manual)
Auto Sea (Coastal, Advanced)
Rain Mode (Auto, Manual)
Auto Rain (Calm, Moderate, Rough)
A/C Auto (Off, On)
Pulse Length (Short, Long)
Echo Stretch (Off, 1, 2, 3)
Echo Average (Off, 1, 2, Auto)
Noise Rejector (Off, On)
Wiper (Off, 1, 2)
Int Rejector (Off, 1, 2, 3)
Display-Dynamic (Narrow, Normal, Wide)
Display-Curve (1, 2, 3)
Color Erase (0 - 11)
2nd Echo Rejector (Off, On)
(Continued on next Page)
AP-1
APPENDIX 1 MENU TREE
(Continued from previous page)
Custom 1
Custom1 (Off, On)
Copy
Gain Mode (Auto, Manual)
Manual Gain (0 - 100)
Sea Mode (Auto, Manual)
Auto Sea (Coastal, Advanced)
Manual Sea (0 - 100)
Rain Mode (Auto, Manual)
Auto Rain (Calm, Moderate, Rough)
Manual Rain (0 - 100)
A/C Auto (Off, On)
Pulse Length (Short, Long)
Echo Stretch (Off, 1, 2, 3)
Echo Average (Off, 1, 2, Auto)
Noise Rejector (Off, On)
Wiper (Off, 1, 2)
Int Rejector (Off, 1, 2, 3)
Display-Dynamic (Narrow, Normal, Wide)
Display-Curve (1, 2, 3)
Color Erase (0 - 11)
Custom 2
Same as Custom 1
Custom 3
Same as Custom 1
Alarm
Target Alarm 1 (In, Out)
Target Alarm 2 (In, Out)
Alarm Level (Low, Med, High)
Watchman (Off, 5min, 10min, 20min)
Panel Buzzer (Off, On)
External Buzzer (Off, On)
Alarm Status
Target
Trails
Time (15s, 30s, 1min, 3min, 6min, 15min, 30min, Continuous)
Gradation (Single, Multi)
Color (Green, Red, Blue, White, Black)
Mode (Relative, True)
Level (1, 2, 3)
Restart (Off, On)
Narrow (Off, On)
Own Ship (Off, 1, 2)
All Cancel
Tuning
Tuning Mode (Auto, Manual)
Manual Tuning (0.00V - 12.00V)
Tuning Init Adjust
(Continued on next page)
AP-2
APPENDIX 1 MENU TREE
(Continued from previous page)
Others
F1 Setup
F2 Setup
F3 Setup
WPT Mark (Off, On)
EBL Reference (Relative, True)
VRM Unit (NM, KM, SM, KYD, NM&YD)
Cursor Position (Rng/Brg, Lat/Lon)
TLL Key Mode (TLL Output, Origin Mark, Both)
Target
Vector Time (1min - 30min)
Vector Reference (Relative, True)
History Dots (Off, 5, 10)
History Interval (15s, 30s, 1min, 2min, 3min, 6min, 12min)
CPA (Off, 0.5NM, 1NM, 2NM, 3NM, 5NM, 6NM)
TCPA (30s, 1min, 2min, 3min, 4min, 5min, 6min, 12min)
Proximity (Off, 0.5NM, 1NM, 2NM, 3NM, 5NM, 6NM, 12NM, 24NM)
ARPA
Display (Off, On)
Color (Green, Red, Blue, White, Black)
Auto Acquisition (Off, On)
ACK Lost Targets
All Cancel
AIS
Display (Off, On)
Color (Green, Red, Blue, White, Black)
Number of Targets (10 - 100)
Sort By (Range, Sector, CPA, TCPA)
Range (0.1NM - 48.0NM)
Sector Start (0° - 359°)
Sector End (0° - 359°)
Ignore Slow Targets (0.0 - 9.9kn)
ACK Lost Targets
GPS
Mode (GPS, WAAS)
Datum (WGS-84, Tokyo, Other)
Datum No (001 -192, 201 - 254)
WAAS (Auto, Manual)
WAAS No (120 - 158)
Satellite Monitor
Self Test
Cold Start
(Continued on next page)
AP-3
APPENDIX 1 MENU TREE
(Continued from previous page)
System
Initial
Key Beep (Off, On)
Offcenter Speed (1kn - 99kn)
Compass Type (Magnetic, True)
Range Preset
Wind Direction (Apparent, True)
NMEA Port 1 (Auto, 4800bps, 38400bps)
NMEA Port 2 (Auto, 4800bps, 38400bps)
NMEA Mixing Out (Off, On)
Tests
Self Test
LCD Pattern
ARPA Test
Sector
Blanks
Sect-Blank 1 Status (Off, On)
Sect-Blank 1 Start (0° - 359°)
Sect-Blank 1 End (0° - 359°)
Sect-Blank 2 Status (Off, On)
Sect-Blank 2 Start (0° - 359°)
Sect-Blank 2 End (0° - 359°)
Units
Range Unit (NM, KM, SM)
Ship Speed Unit (kn, km/h, mph)
Depth Unit (m, ft, fa, pb, HR)
Temperature Unit (°C, °F)
Wind Speed Unit (kn, km/h, mph, m/s)
Installation (For use by the installer. Not accessible by user.)
Factory (For use by the installer. Not accessible by user.)
AP-4
APPENDIX 2 GEODETIC CHART LIST
001:
002:
003:
004:
005:
006:
007:
008:
009:
010:
011:
012:
013:
014:
015:
016:
017:
018:
019:
020:
021:
022:
023:
024:
025:
026:
027:
028:
029:
030:
031:
032:
033:
034:
035:
036:
037:
038:
039:
040:
041:
042:
043:
044:
045:
046:
047:
048:
049:
050:
051:
052
053:
054:
055:
056:
057:
058:
059:
060:
061:
062:
063:
064:
065:
066:
067:
068:
069:
070:
071:
072:
073:
074:
075:
076:
077:
078:
079:
080:
081:
082:
083:
084:
085:
086:
087:
088:
089:
090:
WGS84
WGS72
TOKYO
NORTH AMERICAN 1927
EUROPEAN 1950
AUSTRALIAN GEODETIC 1984
ADINDAN-MN
ADINDAN-E
ADINDAN-MA
ADINDAN-SE
ADINDAN-SU
AFG
AIN EL ABD 1970
ANNA 1 ASTRO 1965
ARC 1950-MN
ARC 1950-B
ARC 1950-L
ARC 1950-M
ARC 1950-S
ARC 1950-ZR
ARC 1950-ZM
ARC 1950-ZB
ARC 1960-MN
ARC 1960-K
ARC 1960-T
ASCENSION IS. 1958
ASTRO BEACON “E”
ASTRO B4 SOR. ATOLL
ASTRO POS 71/4
ASTRONOMIC STATION 1952
AUSTRALIAN GEODETIC 1966
BELLEVUE (IGN)
BERMUDA 1957
BOGOTA OBSERVATORY
CAMPO INCHAUSPE
CANTON IS. 1966
CAPE
CAPE CANAVERAL
CARTHAGE
CHATHAM 1971
CHUA ASTRO
CORREGO ALEGRE
DJAKARTA (BATAVIA)
DOS 1968
EASTER IS. 1967
EUROPEAN 1950-WE
EUROPEAN 1950-CY
EUROPEAN 1950-EG
EUROPEAN 1950-ESC
EUROPEAN 1950-EIS
EUROPEAN 1950-GR
EUROPEAN 1950-IR
EUROPEAN 1950-SA
EUROPEAN 1950-SI
EUROPEAN 1950-NF
EUROPEAN 1950-PS
EUROPEAN 1979
GANDAJIKA BASE
GEODETIC DATUM 1949
GUAM 1963
GUX 1 ASTRO
HJORSEY 1955
HONG KONG 1963
INDIAN-TV
INDIAN-BIN
IRELAND 1965
ISTS 073 ASTRO 1969
JOHNSTON IS. 1961
KANDAWALA
KERGUELEN IS.
KERTAU 1948
LA REUNION
L. C. 5 ASTRO
LIBERIA 1964
LUZON
LUZON-M
MAHE 1971
MARCO ASTRO
MASSAWA
MERCHICH
MIDWAY ASTRO 1961
MINNA
NAHRWAN-O
NAHRWAN-UAE
NAHRWAN-SA
NAMIBIA
MAPARIMA, BWI
NORTH AMERICAN 1927WU
NORTH AMERICAN 1927EU
NORTH AMERICAN 1927AK
Mean Value (Japan, Korea & Okinawa)
Mean Value (CONUS)
Mean Value
Australia & Tasmania
Mean Value (Ethiopia & Sudan)
Ethiopia
Mali
Senegal
Sudan
Somalia
Bahrain Is.
Cocos Is.
Mean Value
Botswana
Lesotho
Malawi
Swaziland
Zaire
Zambia
Zimbabwe
Mean Value (Kenya & Tanzania)
Kenya
Tanzania
Ascension Is.
Iwo Jima Is.
Tern Is.
St. Helena Is.
Marcus Is.
Australia & Tasmania
Efate & Erromango Is.
Bermuda Is.
Columbia
Argentina
Phoenix Is.
South Africa
Mean Value (Florida & Bahama Is.)
Tunisia
Chatham Is. (New Zealand)
Paraguay
Brazil
Sumatra Is. (Indonesia)
Gizo Is. (New Georgia Is.)
Easter Is.
Western Europe
Cyprus
Egypt
England, Scotland, Channel & Shetland Is.
England, Ireland, Scotland & Shetland Is.
Greece
Iran
Italy, Sardinia
Italy, Sicily
Norway & Finland
Portugal & Spain
Mean Value
Republic of Maldives
New Zealand
Guam Is.
Guadalcanal Is.
Iceland
Hong Kong
Thailand & Vietnam
Bangladesh, India & Nepal
Ireland
Diego Garcia
Johnston Is.
Sri Lanka
Kerguelen Is.
West Malaysia & Singapore
Mascarene Is.
Cayman Brac Is.
Liberia
Philippines (excl. Mindanao Is.)
Mindanao Is.
Mahe Is.
Salvage Islands
Eritrea (Ethiopia)
Morocco
Midway Is.
Nigeria
Masirah Is. (Oman)
United Arab Emirates
Saudi Arabia
Namibia
Trinidad & Tobago
Western United States
Eastern United States
Alaska
091:
092:
093:
094:
095:
096:
097:
098:
099:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
NORTH AMERICAN 1927BH
: Bahamas (excl. San Salvador Is.)
NORTH AMERICAN 1927SS
: Bahamas, San Salvador Is.
NORTH AMERICAN 1927CN
: Canada (incl. Newfoundland Is.)
NORTH AMERICAN 1927AB
: Alberta & British Columbia
NORTH AMERICAN 1927EC
: East Canada
NORTH AMERICAN 1927MO
: Manitoba & Ontario
NORTH AMERICAN 1927NE
: Northwest Territories & Saskatchewan
NORTH AMERICAN 1927YK
: Yukon
NORTH AMERICAN 1927CZ
: Canal Zone
NORTH AMERICAN 1927CR
: Caribbean
NORTH AMERICAN 1927CA
: Central America
NORTH AMERICAN 1927CU
: Cuba
NORTH AMERICAN 1927GR
: Greenland
NORTH AMERICAN 1927MX
: Mexico
NORTH AMERICAN 1983AK
: Alaska
NORTH AMERICAN 1983CN
: Canada
NORTH AMERICAN 1983CS
: CONUS
NORTH AMERICAN 1983MX
: Mexico, Central America
OBSERVATORIO 1966
: Corvo & Flores Is. (Azores)
OLD EGYPTIAN 1930
: Egypt
OLD HAWAIIAN-MN
: Mean Value
OLD HAWAIIAN-HW
: Hawaii
OLD HAWAIIAN-KA
: Kauai
OLD HAWAIIAN-MA
: Maui
OLD HAWAIIAN-OA
: Oahu
OMAN
: Oman
ORDNANCE SURVEY OF GREAT BRITAIN 1936-NM : Mean Value
ORDNANCE SURVEY OF GREAT BRITAIN 1936-E : England
ORDNANCE SURVEY OF GREAT BRITAIN 1936-IM : England, Isle
of Man & Wales
ORDNANCE SURVEY OF GREAT BRITAIN 1936-SSI : Scotland &
Shetland Is.
ORDNANCE SURVEY OF GREAT BRITAIN 1936-WL : Wales
PICO DE LAS NIVIES
: Canary Is.
PITCAIRN ASTRO 1967
: Pitcairn Is.
PROVISIONS SOUTH CHILEAN 1963: South Chile (near 53°S)
PROVISIONAL SOUTH AMERICAN 1956MN: Mean Value
PROVISIONAL SOUTH AMERICAN 1956BO: Bolivia
PROVISIONAL SOUTH AMERICAN 1956NC: Chile-Northern Chile
(near 19°S)
PROVISIONAL SOUTH AMERICAN 1956SC: Chile-Southern Chile
(near 43°S)
PROVISIONAL SOUTH AMERICAN 1956CO: Columbia
PROVISIONAL SOUTH AMERICAN 1956EC: Ecuador
PROVISIONAL SOUTH AMERICAN 1956GY: Guyana
PROVISIONAL SOUTH AMERICAN 1956PR: Peru
PROVISIONAL SOUTH AMERICAN 1956VN: Venezuela
PUERTO RICO
: Puerto Rico & Virgin Is.
QATAR NATIONAL
: Qatar
QORNOQ
: South Greenland
ROME 1940
: Sardinia Is.
SANTA BRAZ
: Sao Miguel, Santa Maria Is. (Azores)
SANTO (DOS)
: Espirito Santo Is.
SAPPER HILL 1943
: East Falkland Is.
SOUTH AMERICAN 1969MN
: Mean Value
SOUTH AMERICAN 1969AG
: Argentina
SOUTH AMERICAN 1969BO
: Bolivia
SOUTH AMERICAN 1969BR
: Brazil
SOUTH AMERICAN 1969CH
: Chile
SOUTH AMERICAN 1969CO
: Columbia
SOUTH AMERICAN 1969EC
: Ecuador
SOUTH AMERICAN 1969GY
: Guyana
SOUTH AMERICAN 1969PA
: Paraguay
SOUTH AMERICAN 1969PR
: Peru
SOUTH AMERICAN 1969TT
: Trinidad & Tobago
SOUTH AMERICAN 1969VZ
: Venezuela
SOUTH ASIA
: Singapore
SOUTHEAST BASE
: Porto Santo & Madeira Is.
SOUTHWEST BASE
: Faial, Graciosa, Pico, Sao Jorge & Terceria Is.
TIMBALAI 1948
: Brunei & East Malaysia (Sarawak & Sabah)
TOKYO JP
: Japan
TOKYO KP
: Korea
TOKYO OK
: Okinawa
TRISTAN ASTRO 1968
: Tristan da Cunha
VITI LEVU 1916
: Viti Levu Is. (Fiji Is.)
WAKE-ENIWETOK 1960
: Marshall Is.
ZANDERIJ
: Surinam
BUKIT RIMPAH
: Bangka & Belitung Is. (Indonesia)
CAMP AREA ASTRO
: Camp Mcmurdo Area, Antarctica
G. SEGARA
: Kalimantan Is. (Indonesia)
HERAT NORTH
: Afghanistan
HU-TZU-SHAN
: Taiwan
TANANARIVE OBSERVATORY 1925 : Madagascar
YACARE
: Uruguay
RT-90
: Sweden
TOKYO
: Mean Value (Japan, Korea & Okinawa)
AIN EL ABD 1970
: Bahrain Is.
ARC 1960
: Mean Value (Kenya, Tanzania)
: Kenya
ARS-A
AP-5
APPENDIX 2 GEODETIC CHART LIST
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212
213:
214:
215:
216:
217:
218:
219:
220:
ARS-B
ASCENSION IS. 1958
CAPE CANAVERAL
EASTER IS. 1967
EUROPEAN 1950
JHONSTON IS. 1961
NAHRWAN
NAPARIMA, BWI
NORTH AMERICAN 1927
OLD HAWAIIAN
SAPPER HILL 1943
TIMBALAI 1948
TOKYO
TOKYO
TOKYO
WAKE-ENIWETOK 1960
HU-TZU-SHAN
ADINDAN
ADINDAN
ARC 1950
AYABELLE LIGHTHOUSE
BISSAU
DABOLA
EUROPEAN 1950
LEIGON
MINNA
M’ PORALOKO
NORTH SAHARA 1959
POINT58
POINTE NOIRE 1948
SIERRA LEONE 1960
VOIROL 1960
AIN EL ABD 1970
INDIAN
INDIAN
INDIAN 1954
INDIAN 1960
AP-6
Tanzania
Ascension Is.
Mean Value (Florida & Bahama Is.)
Easter Is.
Portugal & Spain
Jhonston Is.
Saudi Arabia
Trinidad & Tobago
Caribbeen
Oahu
East Falkland Is.
Brunei & East Malaysia (Sarawak & Sabah)
Japan
South Korea
Okinawa
Marshall Is.
Taiwan
Burkina Faso
Cameroon
Burundi
Djibouti
Guinea-Bissau
Guinea
Tunisia
Ghana
Cameroon
Gebon
Algeria
Mean Solution (Burkina Faso & Niger)
Congo
Sierra Leone
Algeria
Saudi Arabia
Bangladesh
India & Nepal
Thailand
Vietnam (near 16N)
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
INDIAN 1960
INDIAN 1975
INDONESIAN 1974
CO-ORDINATE SYSTEM 1937 OF ESTONIA
EUROPEAN 1950
EUROPEAN 1950
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-42 (PULKOVO 1942)
S-JTSK
NORTH AMERICAN 1927
NORTH AMERICAN 1927
NORTH AMERICAN 1983
NORTH AMERICAN 1983
SOUTH AMERICAN 1969
ANTIGUA IS. ASTRO 1943
DECEPTION IS.
FORT THOMAS 1955
ISTS 061 ASTRO 1968
MONTSERRAT IS. ASTRO 1958
FEUNION
AMERICAN SAMOA 1962
INDONESIAN 1974
KUSAIE ASTRO 1951
WAKE Is. ASTRO 1952
EUROPEAN 1950
251: HERMANNSKOGEL
252: INDIAN
253: PULKOVO 1942
254: VOIROL 1874
Con Son Is. (Vietnam)
Thailand
Indonesia
Estonia
Malta
Tunisia
Hungary
Poland
Czechoslovakia
Latvia
Kazakhstan
Albania
Romenia
Czechoslovakia
East of 180W
West of 180W
Aleutian Is.
Hawaii
Baltra, Galapagos Is.
Antigua, Leeward Is.
Deception Is., Antarctica
Nevis, St. Kitts, Leeward Is.
South Georgia Is.
Montserrat, Leeward Is.
Mascarene Is.
American Samoa Is.
Indonesia
Caroline Is., Fed. States of Micronesia
Wake Atoll
Iraq, Israel, Jordan, Kuwait, Lebanon,
Saudi Arabia, and Syria
Yugoslavia (Prior to 1990) Slovenia,
Croatia Bonsia and Herzegovina Serbia
Pakistan
Russia
Tunisia/Algeria
FURUNO
MODEL 1937
SPECIFICATIONS OF MARINE RADAR
MODEL 1937
1.1
GENERAL
Range scale, pulselength (PL) and Pulse repetition rate (PRR)
Range scale (NM) PL (μs) PRR (Hz approx.)
0.0625 to 1.6
0.06
2100
1.5 to 2
0.3
1200
3 to 48
0.8
600
1.2
Range discrimination
15 m
1.3
1.4
1.5
Minimum range
Bearing resolution
Bearing accuracy
16 m
1.9°
±1°
1.6
Range ring accuracy
0.9% of range in use or 8 m, whichever is greater
2.1
2.2
2.3
2.4
2.5
ANTENNA UNIT
Radiator type
Radiator length
Horizontal beamwidth
Vertical beamwidth
Sidelobe
2.6
2.7
2.8
Polarization
Horizontal
Antenna rotation speed 48 rpm
Wind resistance
Relative wind speed 70 kn
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
TRANSCEIVER MODULE (CONTAINED IN ANTENNA UNIT)
Radiation type
P0N
Frequency
9410 MHz±30MHz
Peak output power
4 kW
Duplexer
Circulator with diode limiter
Modulator switching
FET
IF amplifier
Log-amplifier
IF frequency
60 MHz
Tuning
Automatic or manual
Warm-up time
90 s
Slotted waveguide array
120 cm
1.9°
22°
Within ±20° of main lobe: -24dB
Outside ±20° of main lobe: -30dB
SP - 1
E3582S01C
FURUNO
4.1
4.2
4.3
MODEL 1937
DISPLAY UNIT
Screen type
10.4-inch color LCD, 640 (V) x 480 (H) dots, VGA
Effective radar diameter 158 mm
Range scales and Ring interval
Range
scale
0.0625 0.125 0.25 0.5 0.75 1 1.5 1.6 2 3 3.2 4
(NM)
Ring
interval 0.03125 0.0625 0.125 0.125 0.25 0.25 0.5 0.4 0.5 1 0.8 1
(NM)
Number
4 3 4 4
of rings
8 12 16 24 32 36 48
8 12 12
4.4
Marks
4.5
North mark, Variable range marker (VRM), Electric bearing line
(EBL), Target alarm zone, Zoom window, Waypoint mark*, Origin
mark*
Alphanumeric indication Range, Range ring interval, Pulselength (SP/MP/LP), Display
Heading line, Bearing scale, Range ring, Tuning indicator, Cursor,
mode (H UP/C UP/N UP/TM/TRU VIEW), Off-centre (OFFCENT
(M/A/C)), Heading data*, Target trails, Tuning indicator, Target
alarms, Echo stretch (ES), Echo average (EAV), Electric bearing
line (EBL), Vector time*, Range and bearing to cursor or cursor
position*, Interference rejecter (IR), Auto anti-clutter (A/C Auto),
Variable range marker (VRM), Navigation data*(position, speed,
course), ARPA/AIS target data*
*: external data required
5.1
5.2
5.3
5.4
5.5
5.6
INTERFACE
Heading signal
AD-10 format or NMEA0183
NMEA
2 ports, NMEA0183 Ver-1.5/2.0/3.0
Remote display/ Ext. buzzer 1 port (option)
USB
1 port, USB2.0 for maintenance
Input data sentences
BWC, BWR, DBT, DPT, GGA, GLL, GNS, HDG, HDT, HDM, MTW,
MWV, RMB, RMC, VHW, VTG, VWR, VWT, XTE, ZDA
Output data sentences RSD, TLL, TTM
6.1
6.2
POWER SUPPLY
MODEL 1937
12-24 VDC: 8.1-3.8 A
Rectifier (RU-3423, option)
100/110/115/220/230 VAC, 1 phase, 50/60Hz
SP - 2
E3582S01C
FURUNO
7.1
MODEL 1937
7.4
ENVIRONMENTAL CONDITION
Ambient temperature
Antenna unit
-25°C to +55°C
Display unit
-15°C to +55°C
Relative humidity
93% at 40°C
Degree of protection
Antenna unit
IP26
Display unit
IP55
Vibration
IEC 60945
8.1
8.2
COATING COLOR
Antenna unit
Display unit
9.1
9.2
COMPASS SAFE DISTANCE
Antenna unit
Standard: 1.00 m
Display unit
Standard: 0.45 m
7.2
7.3
N9.5
N2.5
SP - 3
Steering: 0.75 m
Steering: 0.30 m
E3582S01C
This page is intentionally left blank.
INDEX
A/C RAIN control..................................... 1-12
A/C SEA control ...................................... 1-11
AIS
activating targets ..................................... 4-2
controls for .............................................. 4-1
display on/off ........................................... 4-1
display range ........................................... 4-4
sleeping targets ....................................... 4-2
sorting targets ......................................... 4-4
symbols ................................................... 4-2
target data ............................................... 4-3
Alarm message ....................................... 1-46
Anti-clutter ............................................... 1-13
ARPA
acquiring targets...................................... 3-2
controls for .............................................. 3-1
CPA/TCPA alarm ............................. 3-8, 4-8
display on/off ........................................... 3-2
display sector .......................................... 4-5
history display .................................. 3-6, 4-7
lost target ....................................... 3-10, 4-9
number of targets .................................... 4-5
precautions for use.................................. 3-1
proximity alarm ................................. 3-9, 4-9
stopping tracking of targets ..................... 3-3
symbol color ................................. 3-10, 4-10
target data ............................................... 3-7
test ........................................................ 6-10
vector ............................................... 3-4, 4-6
Background color .................................... 1-42
Brilliance.................................................. 1-35
CANCEL/HL OFF key ............................. 1-35
Characteristics curve............................... 1-45
Color selections....................................... 1-41
Controls..................................................... 1-1
Course-up mode ....................................... 1-8
CPA/TCPA alarm
AIS .......................................................... 4-8
ARPA ...................................................... 3-8
Cursor ..................................................... 1-14
CUSTOM key .......................................... 1-36
Custom setup
description ............................................. 1-36
setting.................................................... 1-37
Depth unit................................................ 1-51
Display indications .................................... 1-3
Display mode
course-up ................................................ 1-8
head-up ................................................... 1-8
north-up ................................................... 1-8
true motion .............................................. 1-9
true view .................................................. 1-9
Dynamic range ........................................ 1-44
EBL
measuring bearing by............................ 1-18
reference ............................................... 1-19
EBL key................................................... 1-18
Echo area................................................ 1-48
Echo average .......................................... 1-29
Echo stretch ............................................ 1-29
F1, F2, F3 key ......................................... 1-38
False echoes............................................. 2-3
Function keys .......................................... 1-38
Fuse replacement ..................................... 6-3
GAIN control............................................ 1-10
GPS
cold start.................................................. 5-4
datum ...................................................... 5-1
navigator mode ....................................... 5-1
satellite monitor ....................................... 5-3
test ........................................................ 6-11
WAAS...................................................... 5-2
Heading line ............................................ 1-35
Head-up mode .......................................... 1-8
History display
AIS .......................................................... 4-7
ARPA ...................................................... 3-6
Initial sub menu ....................................... 1-49
Interference rejector ................................ 1-15
LCD backlight life ...................................... 6-3
Lost target
AIS .......................................................... 4-9
ARPA .................................................... 3-10
Magnetron life ........................................... 6-3
Maintenance
fuse replacement..................................... 6-3
LCD backlight life .................................... 6-3
magnetron life ......................................... 6-3
preventive................................................ 6-2
IN-1
INDEX
Menu ..........................................................1-4
MENU key ..................................................1-4
Multiple echoes ..........................................2-3
Navigation data
at screen bottom ....................................1-43
standby...................................................1-43
Noise rejector ...........................................1-39
North-up mode ...........................................1-8
OFF CENTER key ...................................1-25
Off-centering the display ..........................1-25
POWER/BRILL key ............................ 1-2, 1-4
Proximity alarm
AIS ...........................................................4-9
ARPA .......................................................3-9
Pulselength ..............................................1-20
Quick start ..................................................1-2
RACON ......................................................2-8
Range and bearing between two targets .1-19
RANGE key................................................1-9
Range measurement ...............................1-16
Range preset ...........................................1-50
Range ring brilliance ................................1-16
Range unit................................................1-51
Remote display ........................................1-56
SART .........................................................2-6
Second-trace echoes ...............................1-40
Sector blank .............................................1-51
Shadow sector ...........................................2-5
Ship speed unit ........................................1-51
Sidelobe echoes ........................................2-4
STBY/TX key .............................................1-2
System configuration .................................. xii
Target alarm
alarm type ..............................................1-23
deactivating .................................. 1-23, 1-24
setting.....................................................1-22
stopping..................................................1-22
strength level..........................................1-24
TARGET ALARM key ..............................1-22
Target trails
color .......................................................1-32
gradation ................................................1-32
level........................................................1-33
mode ......................................................1-31
narrow trails............................................1-34
restarting ................................................1-33
starting ...................................................1-31
stopping..................................................1-31
IN-2
trail copy.................................................1-33
your ship trail..........................................1-34
Temperature unit......................................1-51
Test
ARPA .....................................................6-10
diagnostic .................................................6-7
GPS........................................................6-11
LCD ..........................................................6-9
TLL key ....................................................1-34
TRAILS key ..............................................1-31
Troubleshooting
advanced-level .........................................6-5
simple.......................................................6-4
True motion mode ......................................1-9
True view mode..........................................1-9
Tuning ........................................................1-6
Virtual image ..............................................2-4
VRM
measuring range by ...............................1-17
unit of range measurement ....................1-17
VRM key ..................................................1-17
Watchman ................................................1-40
Waypoint marker ......................................1-46
Wind direction ..........................................1-50
Wind speed unit .......................................1-51
Wiper........................................................1-39
Zoom ........................................................1-27
9-52 Ashihara-cho, Nishinomiya, 662-8580, Japan
Tel: +81 (798) 65-2111 Fax: +81 (798) 65-4200
www.furuno.co.jp
Publication No. DOC-1077
Declaration of Conformity
We
FURUNO ELECTRIC CO., LTD.
----------------------------------------------------------------------------------------------------------------------------------------------(Manufacturer)
9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, Japan
----------------------------------------------------------------------------------------------------------------------------------------------(Address)
declare under our sole responsibility that the product
10.5 inch color LCD radar equipment Model 1835 Series, types Model 1835 (36 NM, 4 kW,
24 rpm), Model 1935 (48 NM, 4 kW, 24/48 rpm), Model 1937 (48 NM, 4 kW, 48 rpm) and
Model 1945 (64 NM, 6 kW, 24/48 rpm)
----------------------------------------------------------------------------------------------------------------------------------------------(Model name, type number)
are in conformity with the essential requirements as described in the Directive 1999/5/EC of the
European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment (R&TTE Directive) and satisfies all the technical
regulations applicable to the product within this Directive
IEC 60945 Fourth edition: 2002-08, IEC 60950-1 First edition: 2001-10
ITU-R M.1177-3: 2003-06, SM.1539-1: 2002-11, SM.1541-2: 2006-05, SM.329-10: 2003-02
----------------------------------------------------------------------------------------------------------------------------------------------(title and/or number and date of issue of the standard(s) or other normative document(s))
For assessment, see
• Statement of Opinion No 09214003/AA/00 of 30 January 2009 issued by Telefication bv, The Netherlands
• Test reports K03-17-164 and -165 of 19 November 2003, K03-17-173, -174, -175, -176, -177 and -188 of
05 January 2004 prepared by Furuno Electric Co., Ltd., Japan
• Test reports FLI 12-08-074 of 27 December 2008, FLI 12-08-075 Rev.1 0f 22 January 2009 and FLI
12-08-076 of 27 December 2009 prepared by Furuno Labotech International Co., Ltd., Japan
On behalf of Furuno Electric Co., Ltd.
Nishinomiya City, Japan
February 4, 2009
------------------------------------------------------
Hiroaki Komatsu
Manager,
International Rules and Regulations
----------------------------------------------------------------------------------
(Place and date of issue)
(name and signature or equivalent marking of authorized person)


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2011:04:28 11:36:45-07:00
Create Date                     : 2011:04:28 11:36:23-07:00
Metadata Date                   : 2011:04:28 11:36:45-07:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : Cover
Document ID                     : uuid:473487ab-cf52-4a9d-abf7-e3c5e13fa679
Instance ID                     : uuid:c877e279-0bfd-41b5-b8dd-4e0936758b2c
Producer                        : Adobe PDF library 8.00
Has XFA                         : No
Page Count                      : 31
Creator                         : Adobe Illustrator CS3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ADB9ZWRTR088A

Navigation menu