Furuno USA 9ZWRTR101 Transceiver for Radar model FAR-1518/1528 User Manual

Furuno USA Inc Transceiver for Radar model FAR-1518/1528

a href="https://usermanual.wiki/Furuno-USA" itemprop="url"> Furuno USA >

Installation Manual Part 3

2. WIRING2-112.4 Processor UnitThe illustration below is the AC specification unit. The DC specification unit does not have the fuse.2.4.1 How to fabricate the power cable1. Remove the armor of the cable by the amount shown in the figure below.2. Remove the insulation of the cores 10 mm. 3. Fix crimp-on lugs (FV5.5-4, yellow, supplied) to the cores. Cover the end of the armor with vinyl tape. Lay the cable in the cable clamp on the cable entry side of the processor unit. Fasten the cable clamp.4. Fasten the crimp-on lugs to the terminal block, referring to the interconnection di-agram at the back of this manual.DVI-D cable (5 m, to Monitor Unit)RGB cable (option)(to external monitor)TTYCSLA, antenna, control unit and RW-4864 cables (For clamping positions, see the sticker on the reverse side of the cover.)* For the antenna cable of the FAR-15x8, remove the spacer to insert the cable.LAN cable (UTP, CAT5e, local supply)(to other radar or HUB switch)(Fasten the cable to the post below the connector with a cable tie.)Power cableDC power: DPYC-6AC power: DPYC-2.5Ground terminal(Use IV-8sq., local supply)USB connector( No use.)SD cardslot*ArmorDC power: DPYC-6AC power: DPYC-2.5 AC: 50 mmDC: 60 mmTaping10
Download:
Mirror Download [FCC.gov]
Document ID2768692
Application IDE061SBxccVRjzwJtWHMtpA==
Document DescriptionInstallation Manual Part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize223.42kB (2792808 bits)
Date Submitted2015-09-30 00:00:00
Date Available2016-03-28 00:00:00
Creation Date2015-09-14 17:34:22
Producing SoftwareAcrobat Distiller 10.1.14 (Windows)
Document Lastmod2015-09-14 17:52:19
Document Titleuntitled
Document CreatorFrameMaker 11.0.2
FCC ID Filing: ADB9ZWRTR101

Navigation menu