Furuno FR 8045 User Manual To The Cd7f2148 59b7 41b1 A966 B52f9aaf5a30
User Manual: Furuno FR-8045 to the manual
Open the PDF directly: View PDF
Page Count: 120 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- IMPORTANT NOTICES
- SAFETY INSTRUCTIONS
- TABLE OF CONTENTS
- FOREWORD
- SYSTEM CONFIGURATION
- 1. OPERATION
- 1.1 Controls
- 1.2 How to Turn the Radar On/Off and Transmit
- 1.3 Display Indications
- 1.4 How to Adjust Display Brilliance, Panel Dimmer
- 1.5 Menu Description
- 1.6 Tuning
- 1.7 Display Modes
- 1.8 How to Select a Range Scale
- 1.9 How to Adjust the Gain (sensitivity)
- 1.10 How to Reduce the Sea Clutter
- 1.11 How to Reduce the Rain Clutter
- 1.12 Automatic Adjustments of Sea and Rain Clutters
- 1.13 Cursor
- 1.14 Interference Rejector
- 1.15 How to Measure the Range to a Target
- 1.16 How to Measure the Bearing to a Target
- 1.17 How to Measure the Range and Bearing Between Two Targets
- 1.18 How to Select a Pulselength
- 1.19 Target Alarm
- 1.20 How to Off-center the Display
- 1.21 Zoom
- 1.22 Echo Stretch
- 1.23 Echo Average
- 1.24 Target Trails
- 1.25 How to Send the Target Position and Enter the Origin Mark
- 1.26 How to Hide the Heading Line Temporarily
- 1.27 Presentation Brilliance
- 1.28 Custom Setup
- 1.29 How to Program Function Keys (F1, F2 and F3 keys)
- 1.30 Noise Rejector
- 1.31 Wiper
- 1.32 How to Reduce Second-trace Echoes
- 1.33 Watchman
- 1.34 Color Selections
- 1.35 Navigation Data
- 1.36 Dynamic Range
- 1.37 Characteristics Curve
- 1.38 Waypoint Marker
- 1.39 Alarm Message
- 1.40 Echo Area
- 1.41 Initial Sub Menu
- 1.42 Units Sub Menu
- 1.43 Sector Blank
- 1.44 Other Menu Items
- 1.45 Remote Display
- 2. DESCRIPTION OF RADAR
- 3. ARPA OPERATION
- 3.1 Precautions for Use
- 3.2 Controls for Use with ARPA
- 3.3 ARPA Display On/Off
- 3.4 How to Acquire and Track the Targets
- 3.5 How to Stop the Tracking of ARPA Target
- 3.6 Vector Attributes
- 3.7 History Display (target past position)
- 3.8 ARPA Target Data
- 3.9 CPA/TCPA Alarm
- 3.10 Proximity Alarm
- 3.11 Lost Target
- 3.12 Symbol Color
- 4. AIS OPERATION
- 4.1 Controls for Use with AIS
- 4.2 AIS Display On/Off
- 4.3 AIS Symbols
- 4.4 Activating, Sleeping Targets
- 4.5 AIS Target Data
- 4.6 How to Sort Targets
- 4.7 Display Range
- 4.8 How to Display the Targets within a Specific Sector
- 4.9 Number of Targets to Display
- 4.10 Vector Attributes
- 4.11 History Display (target past position)
- 4.12 CPA/TCPA Alarm
- 4.13 Proximity Alarm
- 4.14 Lost Target
- 4.15 Symbol Color
- 4.16 How to Ignore Slow Targets
- 5. GPS OPERATION
- 6. MAINTENANCE, TROUBLESHOOTING
- APPENDIX 1 MENU TREE
- APPENDIX 2 GEODETIC CHART LIST
- SPECIFICATIONS
- INDEX
- DECLARATION OF CONFORMITY