Furuno Far3210Bb Operators Manual

2015-08-11

• IMPORTANT NOTICES
• SAFETY INSTRUCTIONS
• TABLE OF CONTENTS
• FOREWORD
• SYSTEM CONFIGURATIONS
• 1. OPERATIONAL OVERVIEW
  • 1.1 Units of the System
    • 1.1.1 Radar Control Unit RCU-025
    • 1.1.2 Trackball Control Unit RCU-026
    • 1.1.3 Processor Unit EC-3000
  • 1.2 How to Turn the System On/Off
  • 1.3 How to Select a Color Palette
  • 1.4 How to Adjust the Display Brilliance (FURUNO monitor)
  • 1.5 Operating Modes
    • 1.5.1 How to select an operating mode
    • 1.5.2 Limitations when using the chart radar mode
  • 1.6 Display Screens
    • 1.6.1 Radar display
    • 1.6.2 Chart radar display
    • 1.6.3 Chart display
  • 1.7 Status Bar
    • 1.7.1 Status bar for radar, chart radar mode
    • 1.7.2 How to operate the buttons, slider bars on the Status bar
  • 1.8 InstantAccess Bar
    • 1.8.1 How to operate the buttons, slider bars on the InstantAccess bar
  • 1.9 Sensor Information, Datum Box
  • 1.10 Menu Overview
    • 1.10.1 Basic menu operation
    • 1.10.2 Menu history feature
    • 1.10.3 How to enter numeric data
    • 1.10.4 How to enter alphanumeric character data
  • 1.11 Context-Sensitive Menus in the Radar Mode
    • 1.11.1 Context-sensitive menus available with buttons and boxes
    • 1.11.2 Context-sensitive menus in the display area in the radar and chart radar modes
  • 1.12 Cursor Position
  • 1.13 How to Select Sensor Settings
  • 1.14 How to Enter Ship Speed
  • 1.15 How to Enter Heading
  • 1.16 How to Mark MOB Position
  • 1.17 How to Offset Position
  • 1.18 How to Select Time Format, Set Local Time
  • 1.19 How to Take a Screenshot of the Display
  • 1.20 The Settings Menu
  • 1.21 User Profiles for Radar, Chart Radar
    • 1.21.1 How to create a profile
    • 1.21.2 How to disable a profile
    • 1.21.3 How to activate a profile
    • 1.21.4 How to restore a profile to the default settings
    • 1.21.5 How to change the settings on the current display to the recommended settings
  • 1.22 How to View Chart Software Version No., Chart System Information, and Operator's Manual
  • 1.23 Tips (operational guidance)
• 2. RADAR, CHART RADAROPERATION
  • 2.1 How to Transmit
  • 2.2 How to Tune the Radar Receiver
    • 2.2.1 Tuning for magnetron radar
  • 2.3 Pulse Length
    • 2.3.1 How to select a pulse length
    • 2.3.2 How to change the pulse length
  • 2.4 How to Adjust the Sensitivity
  • 2.5 How to Suppress Sea Clutter
    • 2.5.1 How to reduce sea clutter automatically
    • 2.5.2 How to reduce sea clutter manually
  • 2.6 How to Suppress Rain Clutter
    • 2.6.1 How to reduce rain clutter automatically
    • 2.6.2 How to reduce rain clutter manually
  • 2.7 Interference Rejector
  • 2.8 Echo Stretch
  • 2.9 Echo Averaging
  • 2.10 Automatic Clutter Elimination (ACE) Function
    • 2.10.1 How to turn the Automatic Clutter Elimination (ACE) function on/off
    • 2.10.2 How to adjust the gain in the Automatic Clutter Elimination (ACE) mode
    • 2.10.3 Automatic Clutter Elimination (ACE) menu
    • 2.10.4 How to get the high sensitivity
    • 2.10.5 How to suppress the false echoes
  • 2.11 Noise Rejector
  • 2.12 Wiper
  • 2.13 How to Preset Controls for Specific Navigation Purpose
    • 2.13.1 How to select a customized echo
    • 2.13.2 How to edit a customized echo
    • 2.13.3 How to restore a user customized echo to the saved settings
    • 2.13.4 How to restore a user customized echo to the factory default settings
  • 2.14 How to Suppress Second-trace Echoes
  • 2.15 Presentation Modes
    • 2.15.1 How to select a presentation mode
    • 2.15.2 Description of presentation modes
  • 2.16 How to Select the Range Scale
  • 2.17 How to Measure the Range to a Target
    • 2.17.1 How to measure the range by using a VRM
    • 2.17.2 How to set VRM attributes
  • 2.18 How to Measure the Bearing to a Target
    • 2.18.1 How to measure the bearing
    • 2.18.2 How to select bearing reference
  • 2.19 Collision Assessment by Offset EBL
    • 2.19.1 How to assess risk of collision
    • 2.19.2 Point of reference for origin point of offset EBL
  • 2.20 How to Measure the Range and Bearing Between Two Targets
  • 2.21 How to Off-center the Display
  • 2.22 Target Trails
    • 2.22.1 Target trails-related indications
    • 2.22.2 True or relative target trails
    • 2.22.3 Trail time
    • 2.22.4 How to reset target trails
    • 2.22.5 How to temporarily remove all target trails from the display
    • 2.22.6 Trail stabilization in true motion
    • 2.22.7 Target trail attributes on the TRAIL menu
  • 2.23 Parallel Index (PI) Lines
    • 2.23.1 How to display, erase a PI line
    • 2.23.2 How to adjust PI line orientation, PI line interval
    • 2.23.3 How to select the number of PI lines to display
    • 2.23.4 How to select the bearing reference for the PI line
    • 2.23.5 How to select the PI lines orientation
    • 2.23.6 How to reset PI lines
    • 2.23.7 How to adjust PI line length
  • 2.24 Zoom
  • 2.25 Markers
    • 2.25.1 Heading line
    • 2.25.2 Stern marker
    • 2.25.3 North marker
    • 2.25.4 Own ship marker
    • 2.25.5 Vectors
    • 2.25.6 Barge marker
    • 2.25.7 Antenna marker
    • 2.25.8 Cursor
  • 2.26 How to Adjust Brilliance of Screen Data
  • 2.27 Watch Alert
  • 2.28 Information Box
    • 2.28.1 Information box contents
    • 2.28.2 How to show the information box
    • 2.28.3 How to turn NAV data on/off
  • 2.29 Interswitch
    • 2.29.1 Displaying antenna information
    • 2.29.2 How to preset antenna and display combinations
    • 2.29.3 How to select an antenna
  • 2.30 Dual Radar (B-type only)
    • 2.30.1 How to enable or disable the dual radar display
    • 2.30.2 Operating considerations for the dual radar display
  • 2.31 Performance Monitor
  • 2.32 Magnetron Reset (For A- and B-types)
  • 2.33 CCRP (Common Consistent Reference Point)
  • 2.34 Drop Mark
    • 2.34.1 How to show, hide the drop mark box
    • 2.34.2 How to inscribe a drop mark
    • 2.34.3 Drop mark bearing reference
    • 2.34.4 How to erase a drop mark
  • 2.35 Anchor Watch
  • 2.36 SART
    • 2.36.1 What is an SART?
    • 2.36.2 How to receive an SART
  • 2.37 Alert Box, Alert List
    • 2.37.1 Alert box
    • 2.37.2 Alert list
    • 2.37.3 Changing priority of primary alerts
  • 2.38 Echo Area
  • 2.39 Echo Color
  • 2.40 Icing Prevention
  • 2.41 Chart Radar Functions
    • 2.41.1 How to switch between radar and chart radar modes
    • 2.41.2 How to show or hide chart objects
    • 2.41.3 How to create and recall custom sets of chart display objects
    • 2.41.4 Chart database information
    • 2.41.5 Chart scale indications
    • 2.41.6 Chart status
    • 2.41.7 Chart alert function
    • 2.41.8 Notes details
  • 2.42 Radar Observation
    • 2.42.1 General
    • 2.42.2 False echoes
    • 2.42.3 RACON
    • 2.42.4 Radar Target Enhancer (RTE)
    • 2.42.5 Solid state radar
• 3. TARGET TRACKING (TT)
  • 3.1 About TT
  • 3.2 How to Show, Hide the TT Display
  • 3.3 How to Input Your Ship's Speed
    • 3.3.1 Echo-referenced speed input
  • 3.4 Automatic Acquisition
    • 3.4.1 How to enable auto acquisition
    • 3.4.2 How to set an automatic acquisition zone
  • 3.5 Manual Acquisition
    • 3.5.1 How to set manual acquisition conditions
    • 3.5.2 How to manually acquire a target
  • 3.6 How to Stop Tracking Targets (including reference targets)
    • 3.6.1 How to cancel tracking on individual tracked targets
    • 3.6.2 How to cancel tracking on all TTs
  • 3.7 TT Symbols and TT Symbol Attributes
    • 3.7.1 TT symbols
    • 3.7.2 TT symbol brilliance
    • 3.7.3 Color for TT symbol
  • 3.8 How to Display TT Data
    • 3.8.1 How to display target data for individual TT
    • 3.8.2 TT pop-up information
    • 3.8.3 Target list
  • 3.9 Vector Modes
    • 3.9.1 Description of vectors
    • 3.9.2 Vector motion and length
  • 3.10 Past Position Display
    • 3.10.1 How to enable/disable the past position display, select past position reference
    • 3.10.2 Past position points
  • 3.11 How to Enter Set and Drift
  • 3.12 TT CPA/TCPA Alarm
    • 3.12.1 How to set the CPA and TCPA limits
    • 3.12.2 How to enable, disable the TT CPA/TCPA alarm
    • 3.12.3 How to acknowledge the TT CPA/TCPA alarm
  • 3.13 TT Lost Target Alert
    • 3.13.1 How to enable, disable the TT lost target alert
    • 3.13.2 How to set the TT lost target filter
  • 3.14 Trial Maneuver
    • 3.14.1 Types of trial maneuvers
    • 3.14.2 How to do a trial maneuver
  • 3.15 TT Simulation Mode
  • 3.16 TT Alerts
  • 3.17 Criteria for Selecting Targets for Tracking
  • 3.18 Factors Affecting Target Tracking
• 4. AIS OPERATION
  • 4.1 How to Deactivate the AIS Function
  • 4.2 How to Show, Hide the AIS Display
  • 4.3 AIS Symbols
  • 4.4 How to Filter Sleeping AIS Targets
  • 4.5 How to Activate Targets
    • 4.5.1 How to activate specific target
    • 4.5.2 How to automatically activate targets
  • 4.6 How to Sleep Targets
    • 4.6.1 How to sleep an activated AIS target
    • 4.6.2 How to sleep all activated AIS targets
  • 4.7 How to Display AIS Target Data
    • 4.7.1 AIS pop-up information
    • 4.7.2 Basic AIS target data
    • 4.7.3 Expanded AIS data
  • 4.8 AIS CPA/TCPA Alarm
  • 4.9 AIS Symbol Brilliance
  • 4.10 AIS Symbol Color
  • 4.11 AIS Lost Targets
    • 4.11.1 How to enable, disable the AIS lost target alert
    • 4.11.2 How to set the AIS lost target filter
  • 4.12 How to Display AIS Target Past Positions
    • 4.12.1 How to enable/disable the past position display, select past position reference
    • 4.12.2 Past position points
  • 4.13 How to Display True or Relative Speed Vectors
  • 4.14 Association of TT and AIS Targets
    • 4.14.1 How to select association method
    • 4.14.2 How to set the conditions for association
  • 4.15 Voyage Data
  • 4.16 AIS Messages
    • 4.16.1 How to create and transmit a new AIS message
    • 4.16.2 How to transmit a saved AIS message
    • 4.16.3 How to display received AIS messages
  • 4.17 Other AIS Features
• 5. RADAR MAP AND TRACK
  • 5.1 What is a Radar Map?
  • 5.2 Presentation Modes
  • 5.3 How to Show, Hide the Radar Map Display
  • 5.4 How to Enter Radar Map Marks and Lines
  • 5.5 How to Find Number of Map Points Used
  • 5.6 How to Select the Radar Map to Display
  • 5.7 How to Attach a Comment to a Radar Map, Find Comment for a Map
    • 5.7.1 How to attach a comment to a radar map
    • 5.7.2 How to find the comment for a map
  • 5.8 How to Erase Radar Map Marks and Lines
    • 5.8.1 How to erase individual radar map marks and lines
    • 5.8.2 How to erase map marks and lines in an area
    • 5.8.3 How to erase all radar map marks and lines in a map file
  • 5.9 How to Copy Radar Map Marks and Lines
    • 5.9.1 How to copy individual radar map mark and line to another map file
    • 5.9.2 How to copy radar map marks and lines within an area to another map file
    • 5.9.3 How to copy all radar map marks and lines in a map file to another map file
  • 5.10 How to Export Radar Map
  • 5.11 How to Import Radar Map
  • 5.12 How to Show, Hide Radar Map Features
  • 5.13 Track
    • 5.13.1 How to set up ship's track
    • 5.13.2 How to erase track
  • 5.14 Route Display
  • 5.15 User Chart Display
• 6. CHART OVERVIEW
  • 6.1 Chart Screen Overview
    • 6.1.1 Electronic chart area
    • 6.1.2 Status bar
    • 6.1.3 InstantAccess bar
    • 6.1.4 Sensor information box
    • 6.1.5 Own ship functions box
    • 6.1.6 Route information box
    • 6.1.7 Overlay/NAV Tools box
    • 6.1.8 Alert box
    • 6.1.9 Permanent warning box
    • 6.1.10 EBL, VRM boxes
    • 6.1.11 Context-sensitive menus
    • 6.1.12 How to enter alphanumeric data
  • 6.2 How to Select the Operating Mode
  • 6.3 How to Select the Chart Operating Mode
  • 6.4 How to Select the Chart Scale
  • 6.5 How to Select the Presentation Mode
  • 6.6 Cursor Position Box
  • 6.7 The Standby Mode
  • 6.8 True Motion Reset
  • 6.9 How to Control Route and User Charts in Voyage Navigation and Voyage Planning Modes
  • 6.10 How to Use the VRM and EBL
    • 6.10.1 How to hide/show an EBL, VRM
    • 6.10.2 How to measure the range and bearing
    • 6.10.3 How to select bearing reference
    • 6.10.4 EBL, VRM functions available with the context-sensitive menu
  • 6.11 Split Screen
  • 6.12 Datum
    • 6.12.1 General
    • 6.12.2 Paper charts
    • 6.12.3 Electronic sea charts
    • 6.12.4 Positioning devices and datum
    • 6.12.5 Chart radar and datum
  • 6.13 How to Select Sensor Settings
  • 6.14 How to Enter Ship Speed
  • 6.15 How to Enter Heading
  • 6.16 Set up Before Departure
    • 6.16.1 Updates before departure
    • 6.16.2 Create or update a route
    • 6.16.3 How to check and prepare route to monitor
    • 6.16.4 Check configuration of navigation sensors
    • 6.16.5 How to reset odometer and trip meter
• 7. HOW TO MANAGE CHARTS
  • 7.1 How to Install Public Keys for ENC Charts
  • 7.2 How to Install ENC Licenses, Charts
    • 7.2.1 How to install an ENC license
    • 7.2.2 How to install ENC charts
  • 7.3 How to Delete ENC Licenses
  • 7.4 How to Install C-MAP Charts
    • 7.4.1 How to register the eToken
    • 7.4.2 How to install the C-MAP database
    • 7.4.3 How to install C-MAP licenses
    • 7.4.4 How to generate and order an update file
    • 7.4.5 How to apply the update file
  • 7.5 How to Delete a C-MAP Database
  • 7.6 How to Install C-MAP DL (Dynamic Licensing) Charts
    • 7.6.1 How to generate and order an update file
    • 7.6.2 How to apply the update file
    • 7.6.3 How to enable and set up the C-MAP DL
  • 7.7 How to Export a List of Charts
  • 7.8 How to Export a List of Specific Licenses
  • 7.9 How to Show the ENC Permit
  • 7.10 How to Backup, Restore Licenses
  • 7.11 How to View Permit Expiration Date
  • 7.12 How to Display Install/Update History
  • 7.13 Catalog of Chart Cells
    • 7.13.1 How to group chart cells
    • 7.13.2 How to view status of chart cells
  • 7.14 How to Open Charts
  • 7.15 How to Print Chart List, Cell Status List
    • 7.15.1 How to print the chart list
    • 7.15.2 How to print the cell status list
  • 7.16 How to Delete Charts
  • 7.17 How to Show Publishers Notes for ENC Charts
  • 7.18 How to Find the Chart Type
  • 7.19 How to Update ENC, C-MAP Charts Manually
    • 7.19.1 How to insert update symbols
    • 7.19.2 How to delete update symbols
    • 7.19.3 How to modify existing update symbols
  • 7.20 How to Synchronize Chart Data
    • 7.20.1 How to select the units to synchronize
    • 7.20.2 How to check synchronization status
    • 7.20.3 Manual updates and synchronization
  • 7.21 How to Reconvert All SENC Charts
• 8. HOW TO CONTROL CHARTOBJECTS
  • 8.1 How to Browse Your Charts
  • 8.2 How to Control Visibility of Chart Objects
    • 8.2.1 How to set value for shallow contour, safety depth, safety contour and deep contour
    • 8.2.2 Basic Setting menu
    • 8.2.3 Chart Display menu
    • 8.2.4 Display base
  • 8.3 How to Control Visibility of Symbols, Features
    • 8.3.1 General page
    • 8.3.2 Tracking page
    • 8.3.3 Route page
    • 8.3.4 Mariner page
    • 8.3.5 Targets page
  • 8.4 Control of Predefined IMO Chart Display Settings
• 9. VECTOR (S57) CHARTS
  • 9.1 Introduction to S57 Charts
    • 9.1.1 Definitions of terms
    • 9.1.2 Chart legend for S57 charts
    • 9.1.3 Permanent warnings for S57 charts
  • 9.2 Chart Viewing Dates and Seasonal Features of the S57 Chart
    • 9.2.1 Introduction
    • 9.2.2 How to approve and highlight S57 chart updates
    • 9.2.3 How to set Display date and Approved until dates
    • 9.2.4 About chart viewing date dependency of S57 standard
  • 9.3 Symbology Used in S57 Charts
    • 9.3.1 Presentation library used for S57 chart features
  • 9.4 How to Find Information About S57 ChartObjects
  • 9.5 Admiralty Information Overlay (AIO)
    • 9.5.1 Installation
    • 9.5.2 How to display the AIO
    • 9.5.3 Catalog of AIO cells
    • 9.5.4 How to find AIO chart object information
    • 9.5.5 How to select the information to display
• 10. C-MAP CHARTS
  • 10.1 C-MAP Cartographic Service
  • 10.2 How to Register the System at C-MAP Norway
  • 10.3 How to Order Charts
  • 10.4 How to Apply for Licenses
  • 10.5 Troubleshooting
  • 10.6 Chart Subscription Services
    • 10.6.1 C-MAP services
    • 10.6.2 What is ENC delivery?
  • 10.7 Chart Display
    • 10.7.1 Introduction
  • 10.8 Permanent Warnings
• 11. CHART ALERTS
  • 11.1 Chart Alerts
    • 11.1.1 How to set safety contour
    • 11.1.2 How to select objects used in chart alerts
  • 11.2 How to Activate Own Ship Check
  • 11.3 Route Planning
    • 11.3.1 Chart alerts for route planning
  • 11.4 Route Monitoring
• 12. ROUTES
  • 12.1 Route Planning Overview
  • 12.2 Main Menu for Route Planning
  • 12.3 How to Create a New Route
    • 12.3.1 How to use the Waypoints page
    • 12.3.2 How to use the User Chart page
    • 12.3.3 How to use the Optimize page
    • 12.3.4 How to use the Alert Parameters page
    • 12.3.5 How to use the Check Results page
  • 12.4 How to Modify an Existing Route
    • 12.4.1 How to change waypoint position
    • 12.4.2 How to change other waypoint data
    • 12.4.3 How to add a new waypoint at the end of a route
    • 12.4.4 How to insert a waypoint
    • 12.4.5 How to delete a waypoint
    • 12.4.6 Geometry check of route
  • 12.5 SAR Operations
  • 12.6 Route Bank
  • 12.7 Route Optimization
    • 12.7.1 Available route optimization strategies
    • 12.7.2 How to optimize a route
    • 12.7.3 How to plan a speed profile
  • 12.8 How to Import Routes
    • 12.8.1 How to import FMD-3xx0, FCR-2xx9, FAR-3xx0 route data
    • 12.8.2 How to import FEA-2x07 route data
    • 12.8.3 How to import csv, ASCII format route data
  • 12.9 How to Export Route Data
    • 12.9.1 How to export FAR-3xx0 route data
    • 12.9.2 How to export route data in FEA-2x07, csv, ASCII format
  • 12.10 How to Delete Routes
  • 12.11 Reports
• 13. USER CHARTS
  • 13.1 Introduction
    • 13.1.1 Objects of user charts
  • 13.2 How to Create a User Chart
  • 13.3 How to Import a User Chart Created with ECDIS FEA-2x07
  • 13.4 How to Edit Objects on a User Chart
    • 13.4.1 How to edit objects on the chart area
    • 13.4.2 How to edit objects from the User Chart dialog box
  • 13.5 How to Delete Objects from a User Chart
  • 13.6 How to Select the User Chart Objects to Display
  • 13.7 How to Delete User Charts
  • 13.8 User Chart Reports
• 14. HOW TO MONITOR ROUTES
  • 14.1 How to Select Route Monitoring
  • 14.2 How to Stop Route Monitoring (Manual, Auto)
  • 14.3 How to Select What Parts of a Route to Display
  • 14.4 How to View Waypoint Information
  • 14.5 How to View User Chart Information
  • 14.6 How to Change Monitored Route to Planned Route
  • 14.7 How to Use Instant Track to Return to or Deviate from Monitored Route
    • 14.7.1 Safe off track mode
    • 14.7.2 Back to track mode
    • 14.7.3 Instant track messages
    • 14.7.4 Instant track details
    • 14.7.5 How to monitor, stop monitoring an instant track route
    • 14.7.6 How to change a monitored route when following an instant track route (safe off track mode only)
    • 14.7.7 Button label and equipment state
• 15. NAVIGATION TOOLS
  • 15.1 How to Access the Nav Tools in the Overlay/NAV Tools Box
  • 15.2 Parallel Index (PI) Lines
    • 15.2.1 How to activate, deactivate PI lines
    • 15.2.2 PI line bearing reference
    • 15.2.3 Number of PI lines to display
    • 15.2.4 PI line mode
    • 15.2.5 How to adjust PI line orientation, PI line interval
    • 15.2.6 How to reset the PI lines
    • 15.2.7 How to adjust PI line length
  • 15.3 Check Area
  • 15.4 Ring
  • 15.5 Predictor
  • 15.6 Anchor Watch
  • 15.7 UKC (Under Keel Clearance)
    • 15.7.1 UKC overview
    • 15.7.2 How to set UKC
    • 15.7.3 UKC window
  • 15.8 Mini Conning Display
  • 15.9 Divider
    • 15.9.1 How to use the divider
    • 15.9.2 Usage characteristics, limitations
    • 15.9.3 How to deactivate and erase the divider
• 16. NAVIGATION SENSORS
  • 16.1 CCRS
  • 16.2 How to Select Navigation Sensors
    • 16.2.1 Sensors menu description
  • 16.3 Source of Position
  • 16.4 Primary and Secondary Positions of Own Ship
  • 16.5 Source of Navigation Data
  • 16.6 Switching of Sensor and Indication
  • 16.7 Filter Status
  • 16.8 Position Alignment
    • 16.8.1 How to align position
    • 16.8.2 How to cancel position alignment
  • 16.9 Wind Sensor
  • 16.10 Depth Sensor
• 17. AIS SAFETY, NAVTEXMESSAGES
  • 17.1 AIS Safety Messages
    • 17.1.1 How to send an AIS safety message
    • 17.1.2 How to display received and sent AIS safety messages
    • 17.1.3 How to delete received and sent AIS safety messages
  • 17.2 Navtex Messages
    • 17.2.1 How to receive Navtex messages
    • 17.2.2 How to delete received Navtex messages
• 18. TT AND AIS DISPLAYS
  • 18.1 TT Display
    • 18.1.1 TT symbols
    • 18.1.2 TT symbol color and size
    • 18.1.3 How to display tracked target data
    • 18.1.4 Past position point attributes
    • 18.1.5 How to set the TT lost target filter
    • 18.1.6 TT recording functions
  • 18.2 AIS Display
    • 18.2.1 AIS symbols
    • 18.2.2 Voyage data
    • 18.2.3 How to filter AIS targets
    • 18.2.4 How to set conditions for automatic activation of sleeping targets
    • 18.2.5 How to sleep all activated targets
    • 18.2.6 How to set the AIS lost target filter
    • 18.2.7 How to display AIS target data
    • 18.2.8 How to display own ship data
  • 18.3 Association
    • 18.3.1 How to select association method
    • 18.3.2 How to set the conditions for association
• 19. RECORDING FUNCTIONS
  • 19.1 How to Record User, Position Events
    • 19.1.1 User events
    • 19.1.2 Position events
  • 19.2 Details Log
  • 19.3 Voyage Log
    • 19.3.1 How to set conditions of logging
  • 19.4 Chart Usage Log
  • 19.5 Danger Targets Log
    • 19.5.1 How to set the conditions for logging danger targets
• 20. ALERTS
  • 20.1 What is an Alert?
  • 20.2 Alert Box
  • 20.3 How to Temporarily Silence the Buzzer for an Alarm or Warning
  • 20.4 How to Acknowledge an Alarm or Warning
  • 20.5 Alert List
  • 20.6 Alert Log
  • 20.7 Alert Reception from Connected Sensors
  • 20.8 List of Alerts
• 21. PARAMETERS
  • 21.1 Ship and Route Parameters
  • 21.2 Instant Track Parameters
  • 21.3 Cost Parameters
• 22. SETTINGS MENU
  • 22.1 How to Access the Settings Menu
  • 22.2 File Export
  • 22.3 File Import
  • 22.4 File Maintenance
  • 22.5 Self Test
  • 22.6 Data Sharing
  • 22.7 Customize
  • 22.8 Display Test
  • 22.9 Keyboard Test
  • 22.10 Screenshots
    • 22.10.1 How to export screenshots
    • 22.10.2 How to delete screenshots
  • 22.11 User Default
  • 22.12 CCRP
• 23. COMMON REFERENCE SYSTEM
  • 23.1 Installation of the System
  • 23.2 Accuracy of the System
• 24. MAINTENANCE AND TROUBLESHOOTING
  • 24.1 Maintenance
  • 24.2 How to Replace the Fuses
  • 24.3 Trackball Maintenance
  • 24.4 How to Clean the Filter in the Processor Unit
  • 24.5 Troubleshooting
  • 24.6 Consumable Parts
  • 24.7 Color Differentiation Test for S57 Charts
  • 24.8 Fallback Arrangements
• APPENDIX 1 MENU TREE
• APPENDIX 2 ABBREVIATIONS, SYMBOLS
• APPENDIX 3 DATA COLOR AND MEANING
• SPECIFICATIONS
• INDEX
• Declaration of Conformity