Furuno Fcv30Bb Brochure
2015-08-11
: Furuno Furuno-Fcv30Bb-Brochure-800447 furuno-fcv30bb-brochure-800447 furuno pdf
Open the PDF directly: View PDF
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Optimize your fishing Multi - direction detection Multi directional detection, Split-Beam sFrequency: 38 kHz; Output power : 4 kW COLOR VIDEO SOUNDER sMulti-beam system presents images received from up to five beams simultaneously sElectronic beam stabilizer eliminates the loss of important targets due to ship's motion in rough seas (within up to 20 degrees) s7-degree sharp beamwidth gives a detailed echo image that is produced by high frequency beams sAutomatic range shift for continuous bottom aquisition and tracking 19" color SXGA LCD MU-190HD (option) The FCV-30 is a high-performance echo sounder designed for variety of fishing applications. This echo sounder employs two new innovate techniques. One is “Multi-Beam” that facilitates multi directional and long-range fish detection. The other is “Split-Beam” which is commonly used in fish resource surveys. FURUNO’s leading-edge signal processing technology makes the FCV-30 unparalleled in this class of sounder. The control unit consists only of a trackball, thumbwheel and several soft keys. Designed for use in commercial fishing FURUNO LCD MU-190HD (19'', SXGA), MU-150HD (15'', XGA) or a PC monitor can be utilized as a display unit. Furthermore, any two monitors can work in a dual display setup. The FCV-30 provides a wide variety of presentation modes in high resolution SXGA or commonly used XGA resolution: Multi-Beam, Split-Beam, Zoom, and A-scope. Multi-Beam mode allows transmission in up to five directions simultaneously to show the location and distribution of a fish school around the vessel. The direction and tilt of each beam can be determined by the setting. This also helps understand the bottom composition, undulation and slope, allowing the operator to make an accurate judgment of best speed and course to trawl. The transducer employs highly sensitive transducer elements to achieve efficient energy conversion, which ensures long range detection with minimal output. This 38 kHz transducer features a narrow beamwidth (7°), which enables the detection of the shapes of fish, fish schools and fish distribution in minute detail. In the Split-beam mode, the FCV-30 has the unique functions called “Fish size assessment” and “Fish distribution”. The former indicates the length of the target fish in the fish school by histogram. The later displays where the target fish is in the detected area and plots the detected fish’s position. Trackball control unit www.furuno.com The FCV-30 is of BlackBox configuration, consisting of a control, processor, transceiver units and a transducer. With a built-in motion sensor, the beam stabilizer can be facilitated to eliminate the loss of important targets due to the ship’s motion in rough seas. All beams are maintained at required tilt by compensating for ship’s pitch and roll. FURUNO GPS satellite compass SC-50/110 detect ship’s heave as well as pitch and roll. The satellite compass improves the echo presentation by compensating for echo ruffling caused by ship’s heave. This gives an unwavering presentation of the echo images even in rough seas, and enhances the accuracy of the measurement for the fish size assessment display. Control Unit CV-301 Transducer CV-303 1.8 kg 4.0 lb 42 kg 92.6 lb 110 4.3" 4- 4 10 370 14.5" 365 14.4" 99 3.9" 446 17.6" 6 0.2" Display Unit (option) MU-150HD Flush Mount MU-190HD Flush Mount 5.4 kg 11.9 lb 8.2 kg 18.1 lb Processor Unit CV-300 Ethernet 100 m max. Transceiver Unit CV-302 Net Sonde NMEA 06S4085 Satellite Compass SC-50/110 GPS Navigator Motion Sensor JIMS-55S (specify when ordering) 10/20 m 02S6019 100-240 VAC 100-120/200-240 VAC 19" Color SXGA LCD MU-190HD (option) Control Unit 15 m or Junction Box CV-304 Transducer CV-303 397 15.6" External HDD 17 0.7" 109 4.3" 17 0.7" 368 14.5" 17 0.7" 96 3.8" 322 12.7" 5m 17 0.7" CIF 06S4085 320 12.6" 200 7.9" 352 13.9" 128 5.0" 125 4.9" Secondary Display USB-VGA 5m 2- 6 17 0.7" 7.5 kg 16.5 lb 8 0.3" Processor Unit CV-300 372 14.6" 5 0.2" 450 17.7" 78 3.1" 364 14.3" 5 0.2" 86 3.4" 4-Ø18 314 12.4" Control Unit CV-301 Bow 34 kg 75.0 lb 3 Transducer 199 7.8'' Transceiver Unit CV-302 Display Unit MU-190HD/150HD or commercial monitor Primary Display 379 14.9'' 428 16.9'' 35 1.4" 50 2.0" 89 3.5" 160 6.3" 13 0.5'' 142 5.6'' 59 2.3'' 58 2.3'' 42 1.7'' 19 0.8'' R INTERCONNECTION DIAGRAM 1 unit 1 pc. 1 set R sStraightforward operation by use of a trackball control unit Display Window Status, Temperature graph, Bottom discrimination graph, Fish size histogram, Target position graph, Bottom lock zoom, Bottom zoom, Marker zoom Advance Speed Freeze, 1/8, 1/4, 1/2, 1/1, 2/1, 3/1, 4/1, 8/1 Alarm Bottom, Fish, Bottom fish, Temperature A-scope Display Selectable among 1/6, 1/8 or 1/10 of screen width. Each transmission displayed on A-scope Record Raw data Others Auto range, Auto shift TRANSCEIVER Output Power 4 kW TX Rate Max. 600 pulse/min Frequency 38 kHz Beam Control Range Direction: 0-360° Tilt: within 20° Stabilization Pitch/Roll: ±20° max. Heave*: ±100 m max. *Requires SC-50/110 INTERFACE I/O Port NMEA, CIF, USB (2.0), LAN (10/100base-T) Input NMEA (IEC61162-1, NMEA0183 Ver. 1.5/2.0/3.0): att, BWC, GGA, GLC, GLL, GNS, GTD, HVE, MTW, RMA, RMB, RMC, VHW, VTG,ZDA CIF: Water temperature, Net depth Output (IEC61162-1, NMEA0183 Ver. 1.5/2.0/3.0) SDDBS, SDDBT, SDDPT, SDTLL, YCMTW, SDvrm, SDbtm POWER SUPPLY Processor Unit 100-240 VAC, 3A-2A Transceiver Unit 100-120/200-240 VAC, 5A-3A ENVIRONMENT Temperature Processor Unit: 0°C to +40°C (32°F to +104°F) Transducer: -5°C to +35°C (23°F to +95°F) Transceiver Unit • with Motion Sensor: -55°C to +45°C (5°F to +113°F) • without Motion Sensor: -15°C to +55°C (°F to +131°F) Control Unit: -15°C to +55°C (5°F to +131°F) Waterproofing Control Unit: IP22 (front panel) 1 unit 1 unit 1 unit 368 14.5" 335 13.2" sBlackBox system works with conventional SXGA/XGA PC monitors 10-5000 m 0-5000 m 2-200 m Split-beam, 3-beam, Split-beam + 2-beam, User1, User2, User3 EQUIPMENT LIST Standard 1. Control Unit CV-301 2. Processor Unit CV-300 3. Transceiver Unit CV-302 (Specify when ordering) · Built-in Motion Sensor JIMS-55S · Without Motion Sensor 4. Transducer CV-303 with 15 m cable 5. Thru-hull Pipe TFB-1600 6. Installation Materials and Standard Spare Parts Option 1. Junction Box CV-304 2. Transducer Tank T-625 4-Ø18 389 15.3” sFish size assessment display indicates the length of selected fish in the targeted fish school FURUNO 19'' LCD MU-190HD, 15" LCD MU-150HD or commercial monitor 1024x768 (XGA), 1280x1024 (SXGA) 136 5.4" 180 7.1" * The GPS satellite compass SC-50 or SC-110 works as a heaving sensor DISPLAY Display Unit (Locally arranged) Resolution Display Range Range: Shift: Zoom Range: Display Mode 490 19.3" 534 21" sHeaving compensation* provides unwavering echo images SPECIFICATIONS OF FCV-30 17 0.7" operation with and Split-beam technology 442 17.4" 15 m Option or local supply 1007PDF Printed in Japan Catalogue No. E-399e Multi-Beam The FCV-30 detects fish schools in any five directions at the same time so that the location relative to the vessel and distribution of the targeted fish school can be recognized. The operator can set five beams at any direction within 20 degrees by menu settings. Flexible display setting The FCV-30 features multi-beam presentation that displays echo images of up to five beams on one display. Arrangement of the display can be done from a menu window with just a few clicks of a button. Five-beam presentation Five beams Multi split Horizontal split Three-beam presentation Beam setting window Three beams Vertical split Direction and tilt of each echo beam can easily be set in this window. Why stabilizer is required ! Pitching and rolling produces adverse effect not only on the sounding image, but also on measurement of fish size. With FURUNO’s exclusive Stabilizer Technology, the FCV-30 can stabilize both Tx and Rx beams independently so that unmatched accuracy is assured. Beam’s direction and tilt Furuno’s exclusive Heaving Compensation with SC-50/110 1 Stabilizer ON Stabilizer keeps the beam on the designated target. Heaving compensation ON 2 Heaving compensation OFF Even in rough sea conditions, the FCV-30 compensates for heaving, presenting a display without undulations. 2 The bottom and fish echoes are wavering due to heaving of the vessel even though the bottom is flat. Stabilizer OFF A beam affected by pitching and rolling fails to detect the target fish. 1 Increase the viewable sizes utilizing dual monitors Dual monitors can be used by connecting a monitor to the USB port on the processor unit with an optional USBVGA (or SVGA) adapter. Extending the screen sizes across dual monitors allows for viewing more information together at the same time. The whole screen spreads out between two monitors Processor Unit A B C D E USB-VGA (or SVGA) adapter An Innovative Pr e with Split-bea ecision Sounder m Technology Display window There are nine display windows, which can be located anywhere on the screen. The background of these windows can be transparent or opaque allowing background images to be viewed. sStatus sTemperature graph sBottom hardness chart (Bottom discrimination graph) sFish size assessment (Fish histogram) Split-Beam Split-beam is an epoch-making technology for analyzing the size and distribution of a targeted fish school. Split-beam allows you to analyze a fish school before targeting it for to be catch. Sample Images Anchovy 14 cm • How long is the target fish in the targeted fish school • How the fish school moves By analyzing the size, volume and movement of a targeted fish school, operators can easily decide what to catch and what not to catch. It is indispensable for deciding when to go for a catch and eliminates fish schools which are smaller than desired. Also, it greatly contributes to fishery resource management or fish resources survey. sFish distribution (Target position graph) sBottom lock Fish size assessment window Section for fish size assessment window sBottom zoom sMarker zoom Sardine 21 cm Status display Fish distribution window The bottom characteristic FCV-30 can plot bottom hardness with a line graph by analyzing the strength of returning echoes. This is useful for searching for a good fishing spot by finding bottom hardness. This chart indicates hardness on a scale of one to ten. Bottom hardness chart Fish size assessment Fish distribution The fish size assessment feature shows fish size within a user-selected measuring area. The bar graph shows size and proportion of fish in the measuring area selected. The vertical axis shows fish length and the horizontal axis shows distribution. The fish distribution display shows the targeted fish’s position and movement. They are shown on the circle, whose scale is adjustable between ±2 to 5 degrees under the vessel. Number of sample The greater the number of samples the more accurate the assessment of the size. Radius scale Latest three samples are shown. Color of circle indicates strength of individual fish echo. (Large circle): latest data (Small circle): 2nd latest data Unit of measurement (Medium circle): 3rd latest data Own ship Fish size assessment window Fish distribution window
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 for Macintosh Create Date : 2009:11:25 09:12:23+09:00 Modify Date : 2010:07:13 13:12:37+09:00 Metadata Date : 2010:07:13 13:12:37+09:00 Format : application/pdf Title : untitled Document ID : uuid:a4900a84-d957-11de-8fdd-001451a80324 Instance ID : uuid:ebd910dc-8e35-11df-9038-0017f20c230e Page Count : 4EXIF Metadata provided by EXIF.tools