Furuno Gp32 Users Manual

2015-02-02

• SAFETY INSTRUCTIONS
• TABLE OF CONTENTS
• FOREWORD
• SYSTEM CONFIGURATION
• WHAT IS WAAS?
• EQUIPMENT LISTS
• 1. OPERATIONAL OVERVIEW
  • 1.1 Controls
  • 1.2 Turning On and Off Power
  • 1.3 Adjusting Brilliance and Contrast
  • 1.4 Display Modes
  • 1.5 Menu Overview
  • 1.6 Simulation Display
• 2. PLOTTER DISPLAY OVERVIEW
  • 2.1 Choosing the Display Range
  • 2.2 Shifting the Cursor
  • 2.3 Shifting the Display
  • 2.4 Centering Own Ship’s Position
  • 2.5 Changing Track Plotting Interval, Stopping Plotting
  • 2.6 Erasing Track
• 3. WAYPOINTS (MARKS)
  • 3.1 Entering Waypoints
  • 3.2 Entering the MOB Mark
  • 3.3 Displaying Waypoint Name
  • 3.4 Operations on the Waypoint List
  • 3.5 Erasing Waypoints
  • 3.6 Speed for Calculating Time-to-Go, Estimated Time of Arrival
• 4. ROUTES
  • 4.1 Creating Routes
  • 4.2 Editing Routes
  • 4.3 Erasing Routes
• 5. DESTINATION
  • 5.1 Setting Destination by Cursor
  • 5.2 Setting Destination by Waypoint
  • 5.3 Setting Route as Destination
  • 5.4 Setting User Waypoint as Destination
  • 5.5 Canceling Destination
• 6. ALARMS
  • 6.1 Arrival Alarm, Anchor Watch Alarm
  • 6.2 XTE (Cross Track Error) Alarm
  • 6.3 Speed Alarm
  • 6.4 WAAS/DGPS Alarm
  • 6.5 Time Alarm
  • 6.6 Trip Alarm
  • 6.7 Odometer Alarm
  • 6.8 Buzzer Type Selection
• 7. OTHER FUNCTIONS
  • 7.1 Calculating Range, Bearing, TTG and ETA
  • 7.2 WAAS Setup
  • 7.3 DGPS setup
  • 7.4 Bearing Reference
  • 7.5 Magnetic Variation
  • 7.6 Geodetic Chart System
  • 7.7 Units of Measurement
  • 7.8 Position Display Format
  • 7.9 Time Difference (using local time), Time Format
  • 7.10 GPS Setup
  • 7.11 User Display Setup
  • 7.12 Resetting Trip and Odometer Distances
  • 7.13 Uploading, Downloading Waypoint, Route Data
  • 7.14 Language
• 8. MAINTENANCE & TROUBLESHOOTING
  • 8.1 Maintenance
  • 8.2 Displaying the Message Board
  • 8.3 Replacing the Fuse
  • 8.4 Replacing the Battery
  • 8.5 Satellite Monitor Display
  • 8.6 Diagnostics
  • 8.7 Clearing Data
• 9. INSTALLATION
  • 9.1 Installation of Display Unit
  • 9.2 Installation of Antenna Unit
  • 9.3 Wiring
  • 9.4 Initial Settings
• APPENDIX
• SPECIFICATIONS
• OUTLINE DRAWINGS
• INTERCONNECTION DIAGRAMS
• INDEX
• Declaration of Conformity