Futaba FHSS1-24G Radio Control (Transmitter) User Manual user manual
Futaba Corporation Radio Control (Transmitter) user manual
Futaba >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1195086 |
| Application ID | scPvp0J83FEO3I7KBCCsgg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.02kB (212713 bits) |
| Date Submitted | 2009-11-06 00:00:00 |
| Date Available | 2009-11-06 00:00:00 |
| Creation Date | 2009-10-31 11:39:46 |
| Producing Software | PrimoPDF |
| Document Lastmod | 2009-11-04 13:49:00 |
| Document Title | Microsoft Word - user_manual.doc |
| Document Creator | PrimoPDF http://www.primopdf.com/ |
| Document Author: | SakumaS |
FHSS1-24G 2.4GHz Module User Manual. Futaba corporation 1080 Yabutsuka Chosei-son Chosei-gun Chiba 299-4395 JAPAN 1. Features 2.4GHz Frequency Hopping Spread Spectrum (FHSS) radio transceiver module. Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band Fully integrated power regulation with a wide input unregulated operating range 4.0 to 7.2V. Equipped Fully integrated local oscillator and 26MHz 20ppm reference crystal 100mA operating current Transmit power 30mW EIRP Receive sensitivity up to -95dBm FHSS data rates up to 500kbps 1/4 mile operating range 2. Pin assign Pin Number Name Description J103 1 I/O 1 Input/output 1 2 I/O 2 Input/output 2 3 I/O 3 Input/output 3 4 I/O 4 Input/output 4 5 I/O 5 Input/output 5 6 GND Module Ground J104 1 I/O 6 Input/output 6 2 I/O 7 Input/output 7 3 I/O 8 Input/output 8 4 I/O 9 Input/output 9 5 I/O 10 Input/output 10 6 I/O 11 Input/output 11 7 LED LED control output 8 Vcc Module power input 9 Vdd 3.3V Regulated power output 3. Specifications Parameter Value Units Storage temperature -20 ~ +80 Degrees Celsius Operating temperature -10 ~ +45 Degrees Celsius Transmit power (conducted) 13 max dBm Receive Sensitivity -95 dBm Input voltage 4.0 ~ 7.2 Volt Output voltage 3.3 Volt Transmit current 100 max mA 4. Block Diagram 4. Module User Requirements 4.1 This module must be integrated into a device where the user cannot access the antenna connector and should not be able to remove or install the module. 4.2 Under a 2.14dBi antenna can be used with this module. The antenna must not exceed the gain and pattern of the standard dipole antenna.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 About : uuid:d0efb89b-66d3-4601-9057-df6139de1537 Producer : PrimoPDF Modify Date : 2009:11:04 13:49+08:00 Create Date : 2009:10:31 11:39:46Z Creator Tool : PrimoPDF http://www.primopdf.com/ Metadata Date : 2009:11:04 13:49+08:00 Document ID : uuid:330396c9-5c83-4d9f-a7e3-c1be96d58c97 Instance ID : uuid:5fc7caed-fd6f-449a-94c8-1dc046d85d8e Format : application/pdf Title : Microsoft Word - user_manual.doc Creator : SakumaS Has XFA : No Page Count : 2 Author : SakumaSEXIF Metadata provided by EXIF.tools