Futaba FHSS3-24G Radio Control User Manual user manual
Futaba Corporation Radio Control user manual
Futaba >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1433323 |
| Application ID | woTIdNGmkvaq7qI7hhFGHA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.95kB (99390 bits) |
| Date Submitted | 2011-03-18 00:00:00 |
| Date Available | 2011-03-21 00:00:00 |
| Creation Date | 2011-03-10 11:48:12 |
| Producing Software | PrimoPDF |
| Document Lastmod | 2011-03-10 11:48:12 |
| Document Title | Microsoft Word - user_manual.doc |
| Document Creator | PrimoPDF http://www.primopdf.com/ |
| Document Author: | SakumaS |
FHSS3-24G 2.4GHz Module User Manual. Futaba corporation 1080 Yabutsuka Chosei-son Chosei-gun Chiba 299-4395 JAPAN 1. Features 2.4GHz Frequency Hopping Spread Spectrum (FHSS) radio transceiver module. Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band Fully integrated power regulation with a wide input unregulated operating range 4.0 to 7.2V. Equipped Fully integrated local oscillator and 26MHz 20ppm reference crystal 100mA operating current Transmit power 60mW EIRP Receive sensitivity up to -98dBm FHSS data rates up to 500kbps 1/2 mile operating range 2. Pin assign Pin Number Name Description J110 1 Vcc Module power input 2 GND Module Ground 3 DATA Input/output 1 4 CS Input/output 2 3. Specifications Parameter Value Units Storage temperature -20 ~ +80 Degrees Celsius Operating temperature -10 ~ +45 Degrees Celsius Transmit power (conducted) 16 max dBm Receive Sensitivity -98 dBm Input voltage 4.0 ~ 7.2 Volt Regurated voltage 3.3 Volt Transmit current 100 max mA 4. Module User Requirements 4.1 This module must be integrated into a device where the user cannot access the antenna connector and should not be able to remove or install the module. 4.2 Under a 2.14dBi antenna can be used with this module. The antenna must not exceed the gain and pattern of the standard dipole antenna. 4.3 The device must contain the following permanent labeling on the exterior of the device as follows: Contains FCC ID: AZPFHSS3-24G 4.4 The user manual of the device must contain the following paragraph: This device complies with part 15 of the FCC rules. Operation is subject the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. to Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz frequency range. 4.5 This module meets the requirements for a mobile device that may be used at separation distances of more than 20cm from the human body. To meet the RF exposure requirements of the FCC this device shall not be co-located with another transmitting device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 2 Producer : PrimoPDF Create Date : 2011:03:10 11:48:12 Modify Date : 2011:03:10 11:48:12 Title : Microsoft Word - user_manual.doc Creator : PrimoPDF http://www.primopdf.com/ Author : SakumaSEXIF Metadata provided by EXIF.tools