Futaba RRC-R11 Remote Controller and Receiver User Manual Manual FCC

Futaba Corporation Remote Controller and Receiver Manual FCC

User Manual

1M23N18503 1 User’s Guide for Starting RBT-1 Please read through this guide carefully first. You’ll need a personal computer to operate this product. The operation manual is written assuming that you can manage basic computer operation. However, please note that we can’t answer questions concerning your personal computer and its operating system. What you need to provide separately ★ Personal computer ･OS Windows® XP ･CPU Pentium®3 with more than 800MHz (Pentium®4 with more than 1.6GHz is recommended.) ･Main memory 256MB or more (more than 512MB recommended) ･Video memory (VRAM) 8MB or more (more than 16MB recommended) ･HDD available capacity 30MB or more ･CD-ROM drive Indispensable ･RS232C port One port(*) ･Display Monitor that can display with XGA (Monitor that can display with the resolution of more than 1024×768 dots) ･Graphics chip or graphics card that uses DirectX9.0c or higher, and graphic driver (*) If there is no RS232C port in your PC, it is possible to connect to the USB port using a commercially available USB-serial converter. However, please note that some USB ports or serial converters reduce communication speed or make communication impossible. ★ Tools You need a Phillips screwdriver for M2.0 mm Phillips screws to maintain or to reassemble this product. The following additional tools are also recommended for the easiest assembly. A pair of tweezers, a straight slot screwdriver, a cutter, and a printer for printing manuals and instructions.
1M23N18503 2 Display Manuals The CD menu (see the screen on the right) appears automatically when you insert the CD-ROM provided with the product into the CD-ROM drive of your PC. If the menu does not appear automatically, select “CD-ROM drive” from “My Computer”, and execute “Autorun.exe”. If you have Acrobat Reader installed, click the display of the manual. If not, click [Install Acrobat Reader] on the screen and install it. Please read and follow these instructions thoroughly. Caution about the operating environment Since the motion editor of RBT-1 uses 3D graphics with MicrosoftⓇ DirectXⓇ technology, the graphics operating environment requires attention. Please make sure of your computer’s specifications, and ask the hardware manufacturers about how to use technology after DirectXⓇ9.0c Even if your computer is equipped with the operating environment required, we cannot guarantee that all computer operations can be performed without problems. RPU11 may not work properly on notebook PCs, small-footprint PCs and all-in-one PCs. Also, the motion speed of the real robot may vary from that of the robot on the motion editor, depending on the performance of your PC and the operating conditions. How to inquire about problems and concerns ★ If the CD has scratches, your computer cannot read the CD properly, or the product does not move, please send your letter, FAX or e-mail with a detailed description of the problem to the store where you purchased the product. After they find the cause, they will inform you of it. Please note that they may not be able to answer your questions promptly by telephone. * Please note that the specifications are subject to change without prior notice for upgrading.
1M23N18503 3 “Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.” Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ・ Reorient or relocate the receiving antenna. ・ Increase the separation between the equipment and receiver. ・ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ・ Consult the dealer or an experienced radio/TV technician for help. FCC ID: AZPRRC-R11 MADE IN CHINA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu