G G Telecom GG03A Bluetooth Headset User Manual USERS MANUAL

G.G. Telecom (2002) Incorporated Bluetooth Headset USERS MANUAL

USERS MANUAL

Introduction1-2Gg03 overview 3-7Getting started6-13Using your headset 17-22Using your headsetwith multiple Bluetooth devices23-27Function / Button matrix28-29LED indicator chart30-31Audio indicator chart32Additional information33-38Declaration of conformity39-41Regulatory information41-42
0102Handle incoming and outgoing calls.Adjust the volume.Mute the microphone.Voice dialing (if your phone supports this function).Last call redial (if your phone supports Handsfree profile).Reject the incoming call (if your phone supports Handsfree profile).What's in the package?your headset Bluetooth headset package comes equipped with a headset and a charging solution.In this package you will find:One Bluetooth headset.One 100-240V power adapter.One USB charging cable.One user guide.One portable charging cradle in the Gg03 package.One removeable ear-hook in the Gg03a package.IntroductionlntroductionYour Bluetooth headset Gg03 is a portable headset solution based on Bluetooth wireless technology.Please read the "Additional Information”before using your headset.What is Bluetooth wireless technology?Bluetooth is the most advanced cable-replacement technology available today. It enables effortless,cable-free connections between your Bluetooth devices. your headset and the Bluetooth enabledphone can communicate within the range up to 10m (30 ft) outdoors or up to 5m (15 ft) indoors withno solid objects in between. How to use your headset?your headset is a Bluetooth V1.2 qualified product and supports both Headset profile and Handsfreeprofile. your headset can store information and wirelessly interacts with up to three differentBluetooth V1.1/V1.2 compliant devices, including mobile phones, PDAs and PCs or any Bluetoothenabled device that supports Headset profile or Handsfree profile. This manual focuses on how touse your headset with your Bluetooth enabled phone. When your headset is connected to yourphone, you can do:
Gg03 overview0304Gg03 overview
05061.Indicator LEDThere are 3 colors(blue/red/purple) to show the status of your headset.2.Multifunction buttonTo answer, end, reject a call and control advance functions by constituting withvolume control button (please refer to the Function/Button matrix).3.Volume control buttonTo increase or decrease the volume of speaker and control advance functionsby constituting with MFB (please refer to the Function/Button matrix).4.Ear-hookTo wear the headset on your ear, you can switch the direction as your habit.5. SpeakerPlays the sound you receive on the call or the audio indicators (please referto the audio indicator chart).6. MicrophoneVoice input for outgoing voice.7. Charging portApproaching with the cradle to charge the battery of your headset.8. Charging CradleDesign for charging the headset by multiple power supplier such as switchingadaptor, USB cable or car charger.Gg03 overview
Getting started0708Getting startedBefore you can use your headset, you must do following two things:1. Charge your headset battery, using an appropriate G.G. Telecom charger.2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone.Chargingyour headset comes with a built-in rechargeable battery. For the first time use, you need to chargefor 4 hours. During charging, the indicator shows a steady red light. When the battery is fullycharged, the red light is off. It takes 90-120 minutes to fully charge the battery. Do not charge yourheadset for more than 1 day. The talk time of Gg03 is about 8 hours, and the standby time is about220 hours. The more you talk using your headset, the less standby time your battery has. yourheadset require longer charging times when not used over extended periods of time.9. Charging PortPlug in the USB charging cable to charge the battery of your headset.10. RemovableRemoveable ear-hook fits either ear.
Getting started0708To charge your headset1. Make sure the earhook forms an angle of 90˚.2.Secure the bottom of the headset on the cradle.1 2
09103.Press the tip of the earpiece firmly towards the cradle until you hear a click sound.4.You will see the red light when the headset is properly charging.5. It takes 90-120 minutes to fully recharge the battery. Red indicator is off.6. Press the buttons on the both side of your cradle to remove your headset from your cradle.563 4 Getting started
1112Gg03v Gg03a Getting started
Getting started1314PairingPower on your headsetLong press the MFB , then you will hear a power on melody and the blue indicator will quicklyflash twice. You could start the operation now.Note 1:The first time your headset is turned on, it might automatically be ready for pairing. Note 2:Long press: It refers to press and release and the duration is more than 3 seconds. After longpress, you should hear 1 long beep.Short press: It refers to press and release and the duration is less than 1 second. After shortpress, you should hear 1 short beep.Gg03a / Gg03v1.Plug the USB charging cable into the charging port of the headset.2.Plug the other end of the USB charging cable into the PC's USB port, charging adapter orcar charger.3.When charging is complete (Red indicator is off, remove the charging adapter or carcharger, and detach the USB charging cable from the headset.
1516to the LED indicator chart).2. Perform a "Bluetooth device discovery" from the mobile phone.3. Select your headset from the discovered devices list and confirm the following on screenprompts.4. When prompted by your phone, enter the passkey “1234”and your headset will confirm topair successfully with a pairing success melody.Note:If your headset is not successfully paired within 2 minutes, it will automatically leave pairingmode. If there is no paired data in the paired devices list of your headset, it will power offotherwise get into standby mode.Power off your headsetLong press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice.Pairing your headset with your phonePair your headset with your phone by adding it to the list of paired devices in your phone. yourheadset should be paired once with your phone before use. The two devices then recognize eachother when they connect. You do not need to pair it again until you want to use your headset withanother device or the pairing information is deleted from your phone. It is recommended that thedistance between your headset and your phone is as close as possible with no solid objects inbetween.1. Put your headset enter pairing mode by long pressing the Volume up button . You can see theblue indicator and the red indicator cross blink per second, your headset is waiting for pairingnow. You can only put your headset into pairing mode when it is in standby mode (please referGetting started
Using your headset1718Using your headsetAfter you have paired your headset with your phone, you can make and receive a call using yourheadset as long as your headset and your phone are turned on and these two devices are withinrange of up to 10 m(30 ft) outdoors or up to 5 m(15 ft) indoors with no solid objects in between. Whenusing your headset, always make sure the Bluetooth operation mode in your phone is on.your headset supports both Handsfree profile and Headset profile. Accessing call functions dependson which profile your phone supports.3. Short press the MFB on your headset. It may take a while to set up the Bluetoothconnection if the Bluetooth connection is down.4. After you hear a beep, voice dial as you normal would.5. To cancel the voice dialing or end the call by short pressing the MFB .Note:Using your headset to record the voice tag can let the recognizing rate enhancement. Pleaserefer to the user's guide of your phone. To answer a call1. When your headset rings or LED indicates you have an incoming call (please refer to theLED indicator chart), short press the MFB to answer the incoming call.Making and answering a phone callYou can make and answer a phone call using the MFB on your headset, or using the keys on yourphone as usual.To make a call using voice dialing1. Make sure your phone support this function and is on.2. Make sure your headset and your phone are both powered on and within range of each other.
1920To reject a call1. Make sure your phone support Handsfree profile.2. When your headset rings, long press the MFB until you hear a long beep.Adjusting the volumeyour headset listening volume and ring volume can be adjusted during a call, your headsetwill remember your volume setting.To adjust the listening volume1. To increase the volume, short press the Volume up button .2. To decrease the volume, short press the Volume down button .3. An long beep will be played while either the minimum or maximum volume has been achieved.Note:If your phone rings first, wait until your headset rings, then short press the MFB. Your phone takestime to set up the Bluetooth connection if the Bluetooth connection is down. 2. End the call by short pressing the MFB .To redial the last call1. Make sure your phone support Handsfree profile.2. When your headset is in standby mode, long press the Volume down button until you hear along beep.3. To cancel the last call redial or end the call by short pressing the MFB .Using your headset
Using your headset2122Note: For safety reasons, do not always adjust the listening volume to the maximum setting. To mute the microphone1. During a call, short press both Volume up button and Volume down button at the same timeto turn off the microphone. While the microphone is turned off, a mute notice tone is heard every 3seconds .2. Short press both Volume up button and Volume down button at the same time to resume theconversation. To do audio transfer from your phone to your headsetIf your headset is turned on or got within range after a call has been initiated, you can transfer thesound from your phone to your headset by short pressing the MFB during a call.Note: To do audio transfer from your headset to your phone, please short press the MFB andVolume down button at the same time.Release the Bluetooth connectionSome mobile phones (e.g. NOKIA mobile phones) do not release the Bluetooth connectionwhen not during a call. For some reasons (e.g. power consumption), you can release theBluetooth connection from your headset by short pressing the MFB and Volume downbutton at the same time then the Bluetooth connection will be dropped.Note: Some mobile phones (e.g. NOKIA mobile phones) can not work properly when there is noBluetooth connection between the Bluetooth headset and the phone, so if these twodevices can get into sniff mode( please refer to the LED indicator chart) when not during acall , do not release the Bluetooth connection!!
23242. Perform a Bluetooth device discovery”from the mobile phone.3. Select your headset from the discovered devices list and confirm the following on screenprompts.4. When prompted by your phone, enter the passkey “1234”and your headset will confirm topair successfully with a pairing success melody.Note:If you have paired your headset with the third phone, you can not put your headset enterpairing mode. The paired devices list of your headset is full now, so if you want to paire yourheadset with another phone, you must reset your headset to clean the paired devices list.And all the paired data stored in the paired devices list will be lost.Resetting your headsetYou may want to reset your headset to its default settings or want to pair your headset thepaired devices list is full with another Bluetooth device. Resetting your headset clears all theUsing your headset with multiple Bluetooth devicesyour headset can pair with up to three different Bluetooth V1.1/V1.2 compliant devices that supportHeadset profile or Handsfree profile. You do not need to buy 3 Bluetooth headsets when you using 3Bluetooth mobile phones, just one Gg03/Gg03a/Gg03v could meet your requirement. Please refer theFunction/Button matrix for the advance functions.Pairing the second/third phone with your headsetPair the second/third phone with your headset by adding it to a list of paired devices in your headset.The second/third phone should be paired once with your headset before use. It is recommended thatthe distance between your headset and your phone is as close as possible with no solid objects inbetween.1. Put your headset enter pairing mode by long pressing the Volume up button on your headset.You can see the blue indicator and the red indicator cross blink per second, now your headset iswaiting for pairing now. You can only put your headset into pairing mode when it is in standbymode (please refer to the LED indicator chart).Using your headset with multiple Bluetooth devices
Using your headset with multiple Bluetooth devices2526current pairings.1. Short press and release all the three buttons on your headset and the duration is less than 1second. You can see the purple indicator quickly flash twice then the blue indicator and the redindicator cross blink per second, your headset go into pairing mode automatically after resetting.You can only reset your headset when it is in standby mode (please refer to the LED indicatorchart).2. Pair the Bluetooth device with your headset.To answer a callWhen your headset have a Bluetooth link with one of the paired phones, and the other paired phonerings, you can answer this call follow these steps:1. Release the Bluetooth connection with current device by short pressing MFB and Volume downbutton at the same time.2. After your headset get into standby mode(please refer to the LED indicator char), press theMFB n times to answer the call through the n'th paired phone.your headset takes time to set up the Bluetooth connection with the n'th phone. If you hearthe ring tone from your headset, just short press MFB again to answer this call. 3. End the call by short pressing the MFB .To make a call using voice dialing1. Make sure your phone support this function and is on.2. Make sure your headset and your phone are both powered on and within range of eachother.3. Voice dialing through the current connected device by short pressing the MFB 1 timeon your headset.Note:Short press the MFB n times to voice dial through the n'th paired device when notconnected. It may take a while to set up the Bluetooth connection if the Bluetooth
2728connection is down.4. After you hear a beep, voice dial as you normal would.5. To cancel the voice dialing or end the call by short pressing the MFB .To redial the last call1. Make sure your phone support Handsfree profile.2. Redial the last call through the current connected device by long pressing the Volume downbutton on your headset.Note:Last call redial using the current connected phone when connected and using the first paired phonewhen not connected. It may take a while to set up the Bluetooth connection if the Bluetoothconnection is down.3. To cancel the last call redial or end the call by short pressing the MFB .Function / Button matrixFunction ButtonPower on/offPairVoice dial using the current connected phone when connectedVoice dial through the first paired phone when not connectedCancel voice dialingCancel last call redialAnswer a callEnd a callVoice dial through the second paired phone when not connected Voice dial through the third paired phone when not long press for 3 secondsshort press 1 timeshort press 2 timesshort press 3 timeslong press for 3 secondsFunction / Button matrix
2930Power offRed indicatorblinks twicePower on Blue indicatorblinks twicePairing modeRed & Blue indicator blinks by turns.Reset Purple indicator blinks twice and then Blue & Red indicators blinks byturns as pairing modeStandby mode Blue indicator blinks once every 4 secondsSniff mode Blue indicator rapidly blinks twice every 4 secondsIncoming call Purple indicator blinks once per secondTalking Blue indicator rapidly blinks 3 times every 4 secondsCharging Red indicator light steady onCharging complete Red indicator offVoice dialing Blue indicator blinks once per secondLast call redial using the current connected phone when connectedLast call redial using the first paired phone when not connectedReject a callVolume upVolume downMute/Unmute the microphoneRelease the Bluetooth connectionAudio transfer from the headset to your phoneResetFunction ButtonPoLED indicator chartHeadset State LED Indicationlong press for 3 secondslong press for 3 secondsshort press 1 timeshort press 1 timeshort press 1 timeshort press 1 timeshort press 1 timeLED Indicator chartShort press: It refers to press and release and the duration is less than 1 second. After short press, you should hear 1 short beep.Long press: It refers to press and release and the duration is more than 3 seconds. After long press, you should hear 1 long beep.
3132Note:Sniff mode: The sniff mode is for power conservation and short response time purpose. Thereis already a Bluetooth connection between your headset and your phone when in sniff mode,so do not spend time to set up a Bluetooth connection when need.Audio indicator chartAudioIndicator chartMute Red indicator blinks per secondLow battery Red indicator rapidly blinks twice every 5 secondsHeadset State LED Indication Headset state Audio indicationPower on Power on melodyPower off Power off melodyPairing success Pairing success melodyVolume adjustment Notice tone while either the minimum or maximum volume hasbeen achievedIncoming call Mobile phone ring tone or Gg03 default ring tone depends onmobile phones Mute Mute notice toneLow battery warning Low battery toneLong press Lone beep toneShort press Short beep tone
3334Additional informationProduct carePlease check for any exceptions, due to national requirements or limitations, in usage of Bluetoothequipment before using your headset.Please check the laws and regulations on the use of mobile phones and hands free equipment likeyour headset in the areas where you drive. Do not carry or store flammable goods such as gas,liquid in your vehicle compartment containing your headset.Do not use your headset while the plane is in the air, Turn OFF your headset before boarding anyaircraft.Do not use your headset near the medical equipment without requesting permission.Use of non-G.G. Telecom original accessories may result in lost of performance, product damage,electronic shock or injury, and warranty termination. Please note only G.G. Telecom service partnersshould remove or replace the battery.Do not attempt do disassemble your headset. your headset does not contain consumerserviceable or replaceable components. Only G.G. Telecom service partners should performservice.Do not place your headset in extreme hot or cold temperature.Do not place your headset in dusty or dirty area, and only use soft damp cloth to clean it.Do not place your headset near lit cigarettes, cigars or candles, or near open flames etc.Do not allow children to play with your headset, as they might injure themselves or others as wellas your headset, and small parts of it may become a choking hazard.If you will not be using your headset for a while, store it in a place that is dry, free from damp,dust and extreme temperatures.FAQPlease refer to http://www.gg2002.comAdditional information
Additional information3536Bluetooth compliance Bluetooth version 1.2 with Headset profile and Handsfree profileBluetooth power 2.5mW (0.0025W)Max. cordless distance 30 feet (10 meters)Weight of headset Gg03:21g / Gg03a:13g / Gg03v:21gStandby time Gg03:220 hours / Gg03a:150 hours / Gg03v:220 hoursTalk time Gg03:8 hours / Gg03a:5.5hours / Gg03v:8hoursNormal re-charge time 1.5 ~ 2 hoursBattery type Li polymer rechargeable batteryNote:Talk time and standby time are varied according to different mobile phones.Gg03 specification Potentially explosive atmospheresFor safety reasons, Turn off your electronic device when surrounded by possible explosiveatmosphere. It is rare, but your electronic device could generate sparks which can cause anexplosion or fire. Areas with a potentially explosive atmosphere are often, but not always, clearlymarked. Explosive atmosphere may include gas stations, fuel or chemical storage facilities, and inenvironment where metal powders, grain, dust are contained in the air.Power supplyDo not wear your headset when charging.Power supply must be connected to designated power sources as marked on the product.To reduce risk of damage to the electric cord, only remove it by grasping onto the AC adaptorrather than the cord itself from the outlet.Make sure the cord is well positioned to avoid potential damage.Before attempting to clean the AC power adapter, please unplug the unit from any power sourceto reduce risk of electric shock.
Additional information3738The AC power adapter is designed for indoor use only, and must not be used outdoors.If the plug will not fit into the outlet, asking help from a qualified electrician. Improper connectioncan result in risk of electric shock.Emergency callsIMPORTANT!You should never rely solely upon any electronic device for essential communications (e.g. 911 calls).Keep in mind that when making or receiving a call, your headset and the electronic device connectedto must be switched on and in a service area with adequate cellular signal strength. Emergency callscan sometimes be disturbed on certain cellular phone networks or when certain network servicesand/or phone features are in use. Check with your local cellular service provider.Battery informationThe rechargeable battery of your headset is not fully charged when it is new. For first time,please charge for 4 hours before using.When the rechargeable battery of your headset is low, there will be one battery low tone and thered indicator quickly flash twice every 5 seconds to alert the user. The rechargeable battery of your headset has a long service life if treated properly.One new battery, or one that has not been used for a long period of time, could have reducedcapacity the first few times it is used.Use your headset in room temperature for maximum battery capacity.Do not expose your headset in an environment temperature above +55 (+131 ). If yourheadset is operated in cold temperatures, the battery capacity is reduced.The battery can only be charged in temperatures between +10 ( (+55 ) and +45 ( (+113 )
Declaration of conformity3940Declaration of conformityFCC statementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions.1. This device must accept any interference received, including interference that may causeundesired operation.2. This device may not cause harmful interference.Federal Communications Commission (FCC) statement15.21You are cautioned that changes or modifications not expressly approved by the part responsible forcompliance could void the user's authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.You are cautioned that changes or modifications not expressly approved by the party
Regulatory information4142responsible for compliance could void your authority to operate the equipment.FCC RF radiation exposure statement:This Transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.Regulatory informationAny modifications or changes (e.g. antennas) made to this headset that are not expressly approvedby G.G. Telecom may void the user's authority to operate this headset. G.G. Telecom is notresponsible for any radio or television interference caused by unauthorized modification of thisheadset. It is the responsibility of the user to correct any interference caused by such unauthorizedmodification. G.G. Telecom and its authorized resellers or distributors will assume no liability for anydamage or violation of government regulations arising from failing to comply with these guidelines.This manual is published by G.G. Telecom, without any warranty. The information contained in thisdocument is subject to change without notice.All rights reserved.The word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks byG.G. Telecom is under license. Other trademarks and trade names are those of their respective owners.

Navigation menu