G G Telecom GG03A Bluetooth Headset User Manual USERS MANUAL
G.G. Telecom (2002) Incorporated Bluetooth Headset USERS MANUAL
USERS MANUAL
Introduction
1-2
Gg03 overview 3
-7
Getting started
6-13
Using
your headset 17-22
Using
your headset
with multiple Bluetooth devices
23-27
Function / Button matrix
28-29
LED indicator chart
30-31
Audio indicator chart
32
Additional
i
nformation
33-38
Declaration of
c
onformity
39-41
Regulatory information
41-42
01
02
Handle incoming and outgoing calls.
Adjust the volume.
Mute the microphone.
Voice dialing (if your phone supports this function).
Last call redial (if your phone supports Handsfree profile).
Reject the incoming call (if your phone supports Handsfree profile).
What's in the package?
your headset Bluetooth headset package comes equipped with a headset and a charging solution.
In this package you will find:
One Bluetooth headset.
One 100-240V power adapter.
One USB charging cable.
One user guide.
One portable charging cradle in the Gg03 package.
One removeable ear-hook in the Gg03a package.
Introduction
lntroduction
Your Bluetooth headset Gg03 is a portable headset solution based on Bluetooth wireless technology.
Please read the "Additional Information”before using your headset.
What is Bluetooth
w
ireless
t
echnology?
Bluetooth is the most advanced cable-replacement technology available today. It enables effortless,
cable-free connections between your Bluetooth devices. your headset and the Bluetooth enabled
phone can communicate within the range up to 10m (30 ft) outdoors or up to 5m (15 ft) indoors with
no solid objects in between.
How to
u
se
your headset
?
your headset is a Bluetooth V1.2 qualified product and supports both Headset profile and Handsfree
profile. your headset can store information and wirelessly interacts with up to three different
Bluetooth V1.1/V1.2 compliant devices, including mobile phones, PDAs and PCs or any Bluetooth
enabled device that supports Headset profile or Handsfree profile. This manual focuses on how to
use your headset with your Bluetooth enabled phone. When your headset is connected to your
phone, you can do:
Gg03 overview
03
04
Gg03 overview
05
06
1.Indicator LED
There are 3 colors(blue/red/purple) to show the status of your headset.
2.Multifunction button
To answer, end, reject a call and control advance functions by constituting with
volume control button (please refer to the Function/Button matrix).
3.Volume control button
To increase or decrease the volume of speaker and control advance functions
by constituting with MFB (please refer to the Function/Button matrix).
4.Ear-hook
To wear the headset on your ear, you can switch the direction as your habit.
5. Speaker
Plays the sound you receive on the call or the audio indicators (please refer
to the audio indicator chart).
6. Microphone
Voice input for outgoing voice.
7. Charging port
Approaching with the cradle to charge the battery of your headset.
8. Charging Cradle
Design for charging the headset by multiple power supplier such as switching
adaptor, USB cable or car charger.
Gg03 overview
Getting started
07
08
Getting started
Before you can use your headset, you must do following two things:
1. Charge your headset battery, using an appropriate G.G. Telecom charger.
2. Pair your headset with a Bluetooth enabled device, for example, a mobile phone.
Charging
your headset comes with a built-in rechargeable battery. For the first time use, you need to charge
for 4 hours. During charging, the indicator shows a steady red light. When the battery is fully
charged, the red light is off. It takes 90-120 minutes to fully charge the battery. Do not charge your
headset for more than 1 day. The talk time of Gg03 is about 8 hours, and the standby time is about
220 hours. The more you talk using your headset, the less standby time your battery has. your
headset require longer charging times when not used over extended periods of time.
9. Charging Port
Plug in the USB charging cable to charge the battery of your headset.
10. Removable
Removeable ear-hook fits either ear.
Getting started
07
08
To charge your headset
1. Make sure the earhook forms an angle of 90˚.2.Secure the bottom of the headset on the cradle.
1 2
09
10
3.Press the tip of the earpiece firmly towards the cradle until you hear a click sound.
4.You will see the red light when the headset is properly charging.
5. It takes 90-120 minutes to fully recharge the battery. Red indicator is off.
6. Press the buttons on the both side of your cradle to remove your headset from your cradle.
56
3 4
Getting started
11
12
Gg03v
Gg03a
Getting started
Getting started
13
14
Pairing
Power on your headset
Long press the MFB , then you will hear a power on melody and the blue indicator will quickly
flash twice. You could start the operation now.
Note 1:
The first time your headset is turned on, it might automatically be ready for pairing.
Note 2:
Long press: It refers to press and release and the duration is more than 3 seconds. After long
press, you should hear 1 long beep.
Short press: It refers to press and release and the duration is less than 1 second. After short
press, you should hear 1 short beep.
Gg03a / Gg03v
1.Plug the USB charging cable into the charging port of the headset.
2.Plug the other end of the USB charging cable into the PC's USB port, charging adapter or
car charger.
3.When charging is complete (Red indicator is off, remove the charging adapter or car
charger, and detach the USB charging cable from the headset.
15
16
to the LED indicator chart).
2. Perform a "Bluetooth device discovery" from the mobile phone.
3. Select your headset from the discovered devices list and confirm the following on screen
prompts.
4. When prompted by your phone, enter the passkey “1234”and your headset will confirm to
pair successfully with a pairing success melody.
Note:
If your headset is not successfully paired within 2 minutes, it will automatically leave pairing
mode. If there is no paired data in the paired devices list of your headset, it will power off
otherwise get into standby mode.
Power off your headset
Long press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice.
Pairing your headset with your phone
Pair your headset with your phone by adding it to the list of paired devices in your phone. your
headset should be paired once with your phone before use. The two devices then recognize each
other when they connect. You do not need to pair it again until you want to use your headset with
another device or the pairing information is deleted from your phone. It is recommended that the
distance between your headset and your phone is as close as possible with no solid objects in
between.
1. Put your headset enter pairing mode by long pressing the Volume up button . You can see the
blue indicator and the red indicator cross blink per second, your headset is waiting for pairing
now. You can only put your headset into pairing mode when it is in standby mode (please refer
Getting started
Using your headset
17
18
Using your headset
After you have paired your headset with your phone, you can make and receive a call using your
headset as long as your headset and your phone are turned on and these two devices are within
range of up to 10 m(30 ft) outdoors or up to 5 m(15 ft) indoors with no solid objects in between. When
using your headset, always make sure the Bluetooth operation mode in your phone is on.
your headset supports both Handsfree profile and Headset profile. Accessing call functions depends
on which profile your phone supports.
3. Short press the MFB on your headset. It may take a while to set up the Bluetooth
connection if the Bluetooth connection is down.
4. After you hear a beep, voice dial as you normal would.
5. To cancel the voice dialing or end the call by short pressing the MFB .
Note:
Using your headset to record the voice tag can let the recognizing rate enhancement. Please
refer to the user's guide of your phone.
To answer a call
1. When your headset rings or LED indicates you have an incoming call (please refer to the
LED indicator chart), short press the MFB to answer the incoming call.
Making and answering a phone call
You can make and answer a phone call using the MFB on your headset, or using the keys on your
phone as usual.
To make a call using voice dialing
1. Make sure your phone support this function and is on.
2. Make sure your headset and your phone are both powered on and within range of each other.
19
20
To reject a call
1. Make sure your phone support Handsfree profile.
2. When your headset rings, long press the MFB until you hear a long beep.
Adjusting the volume
your headset listening volume and ring volume can be adjusted during a call, your headset
will remember your volume setting.
To adjust the listening volume
1. To increase the volume, short press the Volume up button .
2. To decrease the volume, short press the Volume down button .
3. An long beep will be played while either the minimum or maximum volume has been achieved.
Note:
If your phone rings first, wait until your headset rings, then short press the MFB. Your phone takes
time to set up the Bluetooth connection if the Bluetooth connection is down.
2. End the call by short pressing the MFB .
To redial the last call
1. Make sure your phone support Handsfree profile.
2. When your headset is in standby mode, long press the Volume down button until you hear a
long beep.
3. To cancel the last call redial or end the call by short pressing the MFB .
Using your headset
Using your headset
21
22
Note:
For safety reasons, do not always adjust the listening volume to the maximum setting.
To mute the microphone
1. During a call, short press both Volume up button and Volume down button at the same time
to turn off the microphone. While the microphone is turned off, a mute notice tone is heard every 3
seconds .
2. Short press both Volume up button and Volume down button at the same time to resume the
conversation.
To do audio transfer from your phone to your headset
If your headset is turned on or got within range after a call has been initiated, you can transfer the
sound from your phone to your headset by short pressing the MFB during a call.
Note:
To do audio transfer from your headset to your phone, please short press the MFB and
Volume down button at the same time.
Release the Bluetooth connection
Some mobile phones (e.g. NOKIA mobile phones) do not release the Bluetooth connection
when not during a call. For some reasons (e.g. power consumption), you can release the
Bluetooth connection from your headset by short pressing the MFB and Volume down
button at the same time then the Bluetooth connection will be dropped.
Note:
Some mobile phones (e.g. NOKIA mobile phones) can not work properly when there is no
Bluetooth connection between the Bluetooth headset and the phone, so if these two
devices can get into sniff mode( please refer to the LED indicator chart) when not during a
call , do not release the Bluetooth connection!!
23
24
2. Perform a Bluetooth device discovery”from the mobile phone.
3. Select your headset from the discovered devices list and confirm the following on screen
prompts.
4. When prompted by your phone, enter the passkey “1234”and your headset will confirm to
pair successfully with a pairing success melody.
Note:
If you have paired your headset with the third phone, you can not put your headset enter
pairing mode. The paired devices list of your headset is full now, so if you want to paire your
headset with another phone, you must reset your headset to clean the paired devices list.
And all the paired data stored in the paired devices list will be lost.
Resetting your headset
You may want to reset your headset to its default settings or want to pair your headset the
paired devices list is full with another Bluetooth device. Resetting your headset clears all the
Using your headset with multiple Bluetooth devices
your headset can pair with up to three different Bluetooth V1.1/V1.2 compliant devices that support
Headset profile or Handsfree profile. You do not need to buy 3 Bluetooth headsets when you using 3
Bluetooth mobile phones, just one Gg03/Gg03a/Gg03v could meet your requirement. Please refer the
Function/Button matrix for the advance functions.
Pairing the second/third phone with your headset
Pair the second/third phone with your headset by adding it to a list of paired devices in your headset.
The second/third phone should be paired once with your headset before use. It is recommended that
the distance between your headset and your phone is as close as possible with no solid objects in
between.
1. Put your headset enter pairing mode by long pressing the Volume up button on your headset.
You can see the blue indicator and the red indicator cross blink per second, now your headset is
waiting for pairing now. You can only put your headset into pairing mode when it is in standby
mode (please refer to the LED indicator chart).
Using
your headset w
ith
m
ultiple
B
luetooth
d
evices
Using
your headset w
ith
m
ultiple
B
luetooth
d
evices
25
26
current pairings.
1. Short press and release all the three buttons on your headset and the duration is less than 1
second. You can see the purple indicator quickly flash twice then the blue indicator and the red
indicator cross blink per second, your headset go into pairing mode automatically after resetting.
You can only reset your headset when it is in standby mode (please refer to the LED indicator
chart).
2. Pair the Bluetooth device with your headset.
To answer a call
When your headset have a Bluetooth link with one of the paired phones, and the other paired phone
rings, you can answer this call follow these steps:
1. Release the Bluetooth connection with current device by short pressing MFB and Volume down
button at the same time.
2. After your headset get into standby mode(please refer to the LED indicator char), press the
MFB n times to answer the call through the n'th paired phone.
your headset takes time to set up the Bluetooth connection with the n'th phone. If you hear
the ring tone from your headset, just short press MFB again to answer this call.
3. End the call by short pressing the MFB .
To make a call using voice dialing
1. Make sure your phone support this function and is on.
2. Make sure your headset and your phone are both powered on and within range of each
other.
3. Voice dialing through the current connected device by short pressing the MFB 1 time
on your headset.
Note:
Short press the MFB n times to voice dial through the n'th paired device when not
connected. It may take a while to set up the Bluetooth connection if the Bluetooth
27
28
connection is down.
4. After you hear a beep, voice dial as you normal would.
5. To cancel the voice dialing or end the call by short pressing the MFB .
To redial the last call
1. Make sure your phone support Handsfree profile.
2. Redial the last call through the current connected device by long pressing the Volume down
button on your headset.
Note:
Last call redial using the current connected phone when connected and using the first paired phone
when not connected. It may take a while to set up the Bluetooth connection if the Bluetooth
connection is down.
3. To cancel the last call redial or end the call by short pressing the MFB .
Function / Button matrix
Function Button
Power on/off
Pair
Voice dial using the current connected phone when connected
Voice dial through the first paired phone when not connected
Cancel voice dialing
Cancel last call redial
Answer a call
End a call
Voice dial through the second paired phone when not connected
Voice dial through the third paired phone when not
long press for 3 seconds
short press 1 time
short press 2 times
short press 3 times
long press for 3 seconds
Function / Button
m
atrix
29
30
Power off
Red i
ndicator
blinks twice
Power
on Blue i
ndicator
blinks twice
Pairing mode
Red & Blue indicator blinks by turns.
Reset Purple indicator blinks twice and then Blue & Red indicators blinks by
turns as pairing mode
Standby mode Blue indicator blinks once every 4 seconds
Sniff mode Blue indicator rapidly blinks twice every 4 seconds
Incoming call Purple indicator blinks once per second
Talking Blue indicator rapidly blinks 3 times every 4 seconds
Charging Red indicator light steady on
Charging complete Red indicator off
Voice dialing Blue indicator blinks once per second
Last call redial using the current connected phone when connected
Last call redial using the first paired phone when not connected
Reject a call
Volume up
Volume down
Mute/Unmute the microphone
Release the Bluetooth connection
Audio transfer from the headset to your phone
Reset
Function ButtonPo
LED indicator chart
Headset State LED Indication
long press for 3 seconds
long press for 3 seconds
short press 1 time
short press 1 time
short press 1 time
short press 1 time
short press 1 time
LED
I
ndicator
c
hart
Short press: It refers to press and release and the duration is less than 1 second. After
s
hort press, you should hear 1
s
hort beep.
Long press: It refers to press and release and the duration is more than 3 seconds. After long press, you should hear 1 long beep.
31
32
Note:
Sniff mode: The sniff mode is for power conservation and short response time purpose. There
is already a Bluetooth connection between your headset and your phone when in sniff mode,
so do not spend time to set up a Bluetooth connection when need.
Audio indicator chart
Audio
I
ndicator
c
hart
Mute Red indicator blinks per second
Low battery Red indicator rapidly blinks twice every 5 seconds
Headset State LED Indication Headset state Audio indication
Power on Power on melody
Power off Power off melody
Pairing success Pairing success melody
Volume adjustment Notice tone while either the minimum or maximum volume has
been achieved
Incoming call Mobile phone ring tone or Gg03 default ring tone depends on
mobile phones
Mute Mute notice tone
Low battery warning Low battery tone
Long press Lone beep tone
Short press Short beep tone
33
34
Additional information
Product care
Please check for any exceptions, due to national requirements or limitations, in usage of Bluetooth
equipment before using your headset.
Please check the laws and regulations on the use of mobile phones and hands free equipment like
your headset in the areas where you drive. Do not carry or store flammable goods such as gas,
liquid in your vehicle compartment containing your headset.
Do not use your headset while the plane is in the air, Turn OFF your headset before boarding any
aircraft.
Do not use your headset near the medical equipment without requesting permission.
Use of non-G.G. Telecom original accessories may result in lost of performance, product damage,
electronic shock or injury, and warranty termination. Please note only G.G. Telecom service partners
should remove or replace the battery.
Do not attempt do disassemble your headset. your headset does not contain consumer
serviceable or replaceable components. Only G.G. Telecom service partners should perform
service.
Do not place your headset in extreme hot or cold temperature.
Do not place your headset in dusty or dirty area, and only use soft damp cloth to clean it.
Do not place your headset near lit cigarettes, cigars or candles, or near open flames etc.
Do not allow children to play with your headset, as they might injure themselves or others as well
as your headset, and small parts of it may become a choking hazard.
If you will not be using your headset for a while, store it in a place that is dry, free from damp,
dust and extreme temperatures.
FAQ
Please refer to http://www.gg2002.com
Additional
i
nformation
Additional
i
nformation
35
36
Bluetooth compliance Bluetooth version 1.2 with Headset profile and Handsfree profile
Bluetooth power 2.5mW (0.0025W)
Max. cordless distance 30 feet (10 meters)
Weight of headset Gg03:21g / Gg03a:13g / Gg03v:21g
Standby time Gg03:220 hours / Gg03a:150 hours / Gg03v:220 hours
Talk time Gg03:8 hours / Gg03a:5.5hours / Gg03v:8hours
Normal re-charge time 1.5 ~ 2 hours
Battery type Li polymer rechargeable battery
Note:
Talk time and standby time are varied according to different mobile phones.
Gg03 specification Potentially
e
xplosive
a
tmospheres
For safety reasons, Turn off your electronic device when surrounded by possible explosive
atmosphere. It is rare, but your electronic device could generate sparks which can cause an
explosion or fire. Areas with a potentially explosive atmosphere are often, but not always, clearly
marked. Explosive atmosphere may include gas stations, fuel or chemical storage facilities, and in
environment where metal powders, grain, dust are contained in the air.
Power
s
upply
Do not wear your headset when charging.
Power supply must be connected to designated power sources as marked on the product.
To reduce risk of damage to the electric cord, only remove it by grasping onto the AC adaptor
rather than the cord itself from the outlet.
Make sure the cord is well positioned to avoid potential damage.
Before attempting to clean the AC power adapter, please unplug the unit from any power source
to reduce risk of electric shock.
Additional
i
nformation
37
38
The AC power adapter is designed for indoor use only, and must not be used outdoors.
If the plug will not fit into the outlet, asking help from a qualified electrician. Improper connection
can result in risk of electric shock.
Emergency
c
alls
IMPORTANT!
You should never rely solely upon any electronic device for essential communications (e.g. 911 calls).
Keep in mind that when making or receiving a call, your headset and the electronic device connected
to must be switched on and in a service area with adequate cellular signal strength. Emergency calls
can sometimes be disturbed on certain cellular phone networks or when certain network services
and/or phone features are in use. Check with your local cellular service provider.
Battery
i
nformation
The rechargeable battery of your headset is not fully charged when it is new. For first time,
please charge for 4 hours before using.
When the rechargeable battery of your headset is low, there will be one battery low tone and the
red indicator quickly flash twice every 5 seconds to alert the user.
The rechargeable battery of your headset has a long service life if treated properly.
One new battery, or one that has not been used for a long period of time, could have reduced
capacity the first few times it is used.
Use your headset in room temperature for maximum battery capacity.
Do not expose your headset in an environment temperature above +55 (+131 ). If your
headset is operated in cold temperatures, the battery capacity is reduced.
The battery can only be charged in temperatures between +10 ( (+55 ) and +45 ( (+113 )
Declaration of
c
onformity
39
40
Declaration of conformity
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device must accept any interference received, including interference that may cause
undesired operation.
2. This device may not cause harmful interference.
Federal Communications Commission (FCC)
s
tatement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user's authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
Regulatory information
41
42
responsible for compliance could void your authority to operate the equipment.
FCC RF
r
adiation
e
xposure
s
tatement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Regulatory information
Any modifications or changes (e.g. antennas) made to this headset that are not expressly approved
by G.G. Telecom may void the user's authority to operate this headset. G.G. Telecom is not
responsible for any radio or television interference caused by unauthorized modification of this
headset. It is the responsibility of the user to correct any interference caused by such unauthorized
modification. G.G. Telecom and its authorized resellers or distributors will assume no liability for any
damage or violation of government regulations arising from failing to comply with these guidelines.
This manual is published by G.G. Telecom, without any warranty. The information contained in this
document is subject to change without notice.
All rights reserved.
The word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
G.G. Telecom is under license. Other trademarks and trade names are those of their respective owners.