G Tech Technology X300 2.4GHz Wireless Gaming Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1986184
Application ID	S7uhZ2m/pPpithXqpzcu8A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	386.04kB (4825534 bits)
Date Submitted	2013-06-08 00:00:00
Date Available	2013-06-08 00:00:00
Creation Date	2012-11-21 08:40:59
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2013-06-05 15:24:50
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	llj

User's Guide
Contents
P01-02 Accessories Details
P03
Package Content
P04
Quick Start Guide
P05-08 User Guide
P09
Mouse Technical Parameters
P10-14 Driver Introduction
Accessories Details
Scrolling wheel
Mid-but
Mid-button
Breathing light
Breathing light for wheel
DPI up button
DPI down button
Breathing light switch
Battery capacity indicator
Programmable side buttons
01
Top surface
of the mouse
IR sensor
USB cable lock
Laser sensor
Mouse charging connect points
Magnet fix point
Charging dock connect point
aser 50
gL
dpi
40
Gami
IR Power Saving
Mode switch button for wireless
Charging dock (receiver function)
Wired mode USB port
Long-lasting foot pad
Turbo-click Left/Right button
Charging dock/receiver
USB port
Bottom
m surfa
surface
ace
of the mousee
02
Package Content
Quick Start Guide
1* Gaming Mouse X300
Please check if the accessories are complete, and read this
1* Charging Dock (Receiver Function)
Fu
unction)
manual carefully before use.
Dual Power Train X300 Gaming Mouse can be used as not only
1* X300 USB Cable
2* X300 Spare Foot Pads
1* X300 Manual
wireless mouse but also wired mouse by dual powered.
Using as wireless mouse
Us
（1）Insert the USB cable into free USB port of PC
Caution: The master cable is for data transfer and only the master cable can
activate the mouse, the assistant cable is only for charge help, if you connect
the both USB ports to your PC, the charging time will be shorten.
1* X300 Quick Start Guide
1* X300 Driver CD
（2）Connect the trapezoid USB port to the charging dock
which is also acted as the receiver.
（3）To start using, switch on/off button to
Energy-saving mode
or
Gaming mode
03
04
Using as wired mouse
（1）Insert the USB cable into available USB port of PC
Caution: The master cable is for data transfer and only the master cable can activate
the mouse, the assistant cable is only for charging help, if you connect the both USB
ports to your PC, the charging time will be shorten.
（2）To start using, please connect the trapezoid USB port to the mouse .
（3）If you want to pull out the cable, please push the USB cable wedge
switch to release the cable before that.
Remark: After USB cable connected with the mouse, the
wireless mode would be invalid automatically, and the
mouse would be switched into wired mode accordingly
Programmable side-buttons
User Guide
The four side-buttons with fault functions: volume up, volume
down, forward and backward, they also could be self defined
after installing the driver.
Top lighting buttons
Button function
Three top lighting buttons: DPI up button, DPI down button,
lighting-switch button
Left/Right button —— Turbo-click
Unique Turbo-Click technology reaches 1ms reports
period and 8-times faster than common wired mouse, to
bring you a good enjoy in gaming.
Breathing wheel light
All in one breathing light for wheel, combine the functions of
scrolling wheel, mid-button and breathing light.
05
Scrolling wheel function:
The wheel is adopted high grade ABS material to assure its
resist-abrasion for a long time when scrolling
Mid-button function:
Click the mid-button, move the screen by mouse pointer,
mid-button
also could be customized by self defined after installing driver.
Breathing light: different colours for distinguishing modes
Breathing Light Colour
Mode
Red
Wireless Gaming Mode
Blue
Wireless Energy-saving Mode
Red
Wired Mode
By different lighting ways, breathing light could be used for indications of
power-on, using, binding, charging, intelligent recognizing, DPI switching
Action
Lighting way
Mouse status
under using
long-time lighting
normal use
use when the
breathing light turn off
light off
normal use
hold mouse
light fade in
wake up at once
switch DPI
flash
switch DPI
put on charging dock
long-time lighting
Auto-bind successfully
put on charging dock
fade in/out by circle
charging
Switch DPI: The mouse has three levels DPI, and could be
switched by dpi switch button.
Click DPI + by once, the dpi will increases one level, there is
no change after biggest level; click DPI – by once, the dpi will
decrease one level, there is no change after smallest level.
You may also customize the dpi by the driver.
Default DPI:
Different factory settings of default dpi would be set under
different mode, breathing light flashes different times
according to its dpi
06
If you change the DPI by driver, breathing light would indicate DPI value after the latest status.
Lighting switch button:
Breathing light, charging indicator and top lighting buttons will be
long-time lighting when mouse is working, and you can switch the
light off by the button if you want the light off.
Instructions for wireless mode
Mode switch button
Under wireless mode
1. Switch the button to
, the mouse power is cut off.
2. Switch the button to
, the mouse is switched to
Wireless Energy-saving Mode
3. Switch the button to
, the mouse is switched to
Wireless Gaming Mode
aser 5
gL
0dpi
04
Gam
in
Dual-sensor switch
Under wireless gaming mode, the mouse will switch to laser sensor
automatically with accurate location and satisfied performance.
Under wireless energy-saving mode, the mouse will switch to IR optical
sensor of low power consumption automatically for long battery life.
Breathing wheel light
Charging dock indicator
Working status
Charging dock indicator
Normal connection
(no mouse)
Long-time lighting
Mouse breathing light
Mouse binding
Flash several times
Long-time lighting
Charging
Fade in/out by circle
Fade in/out by circle
Mouse charging indicator
Battery capacity indicator
Battery power Battery indicator (blue)
Under wireless energy-saving mode, it shows blue; under wireless
gaming mode, it shows red; under wired mode, it shows red too.
07
Charging dock
1. The charging dock combines the functions of mouse charging,
acting as a receiver and auto- binding
2. To start using, connect the cable to the charging dock
3. The design of the dock is with magnet, it is available to fix the
mouse to the dock.
4. The indicator at the bottom of charging dock will flash or light on
according to different status. If you want to switch the light off, you
can close the light by self setting from the driver.
Dual antenna technology
Under wireless modes, the charging dock is also used a receiver. Dual
antenna technology ensure all directional data transmission up to 50
meters.
Mouse charging:
There is lithium battery inside the mouse. You can put the mouse to
the dock and charge the mouse directly.
Automatic binding:
The mouse and dock will be paired as long as you put the mouse to the
dock. During the pairing, the blue light will flash, when the blue lights
on, it means the pairing is finished successfully.
Remark: mouse will be paired firstly for the first use and then run into
charging mode
100%~80%
3 indicators long-time light
80%~50%
The bottom and middle indicators
long-time light
50%~20%
The bottom indicator long-time light
<20%
Low power, the bottom indicator flashes
Function
1. It shows the battery charging status when mouse is charging
2. It is available for you to know battery power balance in use.
Intelligent touch-on technology
The mouse is adopted intelligent touch-on technology: The mouse
will go into sleep down after stopping use for 2 seconds, and will
be wake up immediately when hand detected.
Powerful lithium battery
There is powerful lithium battery inside the mouse. The lithium
battery is non-memory charging mode for free using. It can works
up to 25 hours with no pause under wireless gaming mode with all
lights on if the battery capacity is full.
Instructions for wired mouse
USB cable
When you connect the cable with the mouse, which will work
as a wired mouse. Its report rate could run up to 1000RPS
which reaches the level of expert gaming mouse.
There is a cable wedge switch which is for lock the USB
cable; you have to push the wedge switch when pulling out
the USB cable.
Caution: to avoid unnecessary damage, please use the
original cable in the package.
08
Technical Parameters
Driver Introduction
Mouse Model. Reversion No.
Gaming-grade specifications
Battery capacity: shows latest battery capacity
Tracking
Resolution
90-5040DPI
Frame rate
11750fps
Max acceleration
30G
Max speed
150ips(up to 150
inches(3.81m)/second)
Responsiveness
09
USB data format
16bits/axis
USB report rate
1000RPS (up to 1’000
reports/second)
Intelligent hand
-recognize
Sleep mode
Mouse buttons setting: change functions by
clicking accordant button
Glide
Dynamic coefficient of
friction-Mu(k)
.094
Static coefficient of
friction-Mu(s)
.144
Durability
Buttons(Left/Right)
10 million clicks
Foot pad
250kilometers
Setting switching: record switching of
different settings
Setting: property setting for mouse
Reset: reset factory settings
Confirm: driver window will hide after
confirming settings
Cancel: cancel all unconfirmed settings
Apply: go on other settings after confirmation
10
Advanced setting contains:
Computer status bar
There are two icons in status bar after driver installed
Battery icon: when mouse pointer moved here, it will show the
battery capacity.
Mouse icon: double click it by left button, the window of driver
would appear
Single click by right button, two switchable modes arise (refer to
1 in below picture) Click “open”, driver window would appear;
click “quit”, close the driver (refer to 2 in below picture)
Macros settings steps:
11
click start
input characte
click over
Button settings
Click the button you want to customize, there is a dialog box Advanced settings, it contains two options: basic setting and
advanced setting
In basic setting: you may make a quick setting of left button,
right，button, mid-button, double click, 4 key, 5 key, left moving,
right moving
Macros settings could support 3 characters at most
Macros using
1. Click the button for Macros settings
2. Macros setting data arise at the accordant place
Basic commands
Additional commands
Media functions
12
Accuracy settings
Speed settings for double click: This is for speed of
double click, you may take a test with it.
DPI settings: This is for customizing DPI. It could be
any 90-multiple value between 90-5040.
Click setting, there is a dialog box
13
14
DPI settings by driver is only valid under wired mode
and wireless gaming mode, and could not be changed
under wireless energy-saving mode.
1 Needle settings for scrolling wheel: This is for needle
speed and vertical wheel speed.
Report Rate Showing
This is for showing USB report rate. Wired mode is
1000Hz, wireless gaming mouse mode is 500Hz, and
wireless energy-saving mode is 250Hz
Other settings
This is for on/off settings of charging dock indicator,
and needle or focus mode of scrolling wheel
Setting switching
Driver could reserve two modes, different button functions
and dpi content could be set under different modes
Settings steps:
Driver settings steps:
1. Set the contents by your demand
The name of mode could be revised as per your favorite by
double clicking, as below:
2. Click “apply” or “confirm”
15
16
If you want to back to reset mode, click “reset” button, then
click “apply” or “confirm”.
How to switch:
1. Single click mouse icon by right button, the name of
modes arise
2. Under driver window, click the accordant name, then
click “apply” or “confirm”
3. Leave your hand from mouse for 3-5 seconds
4. Once the light of the mouse is off, the settings are valid
Remark:
1. The mouse has function of reserving profiles. You can still use the
activated set profiles when quit driver or change computer
2. After settings, you must leave your hand from the mouse for 3-5
seconds, otherwise, the settings data could not be sent to mouse, and
the setting would fail.
1, Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment
17
2 , NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to tr y to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2012:11:21 08:40:59+08:00
Modify Date                     : 2013:06:05 15:24:50+08:00
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Mod Date                        : 2013:06:05 15:24:50+08:00
Creation Date                   : 2012:11:21 08:40:59+08:00
Author                          : llj
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2013:06:05 15:24:50+08:00
Document ID                     : uuid:c742f5a1-8dd6-4d9d-9f8b-5bb3e4ec6fb7
Instance ID                     : uuid:48156386-ec64-46cd-b8cd-5eb709cc30b3
Format                          : application/pdf
Title                           : 
Creator                         : llj
Page Count                      : 11

EXIF Metadata provided by EXIF.tools