G4S Technology S820 Proximity card reader User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	334402
Application ID	EOzdJ8nlDoH/01F/pOvM9A==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.65kB (258158 bits)
Date Submitted	2003-06-23 00:00:00
Date Available	2003-06-23 00:00:00
Creation Date	2003-05-22 17:04:06
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-06-23 22:20:10
Document Title	\\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\s820.eps
Document Creator	CorelDRAW(TM) Classic

Installation and User Instructions for S820 Readers
The S820-HICLR is a 125kHz proximity card reader
®
that is capable of reading HID formatted cards, as
well as other standard and custom formats.
The S820-HICLR uses 20mA current loop
communications.
Mount the Backplate
You should find that the backplate has suitable holes for
connection to most standard electrical backboxes.
To mount the backplate:
1) Detach the main body of the reader from the backplate by releasing the two securing
screws along the bottom edge of the reader.
2) Mount the backplate adjacent to the opening edge of the door and at a convenient
height. Feed the cable to the reader through the backplate.
Reader Connections
20mA Current Loop Reader Connections
12V
Controller connections
(20mA reader port)
0V
Rx+
RxTx+
Tx-
Twisted pairs (use
Belden 9503 cable)
Red
Black
Green
Orange
White
Blue
12V
0V
Tx+
Tx-
Reader
Rx+
Rx-
Connect screen at
controller end only
(attach to case)
Using the Reader
Present the proximity card face-on to the reader until you hear a "bleep". The maximum read range
is typically 4" ( 10cm). If the green indicator is lit, the card has been accepted and the door is
unlocked. If the red indicator is lit, either the card has not been accepted, or you do not have
access through the door.
Note: cards can be presented in rapid succession - there is no need to wait for the green or red
LED to extinguish before presenting another card.
9600-0303. Installation and User Instructions for S820
Readers, Issue 1.0x1 22nd May 2003. © AMAG
Technology, 2003.
FCC Notice: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Any unauthorised modification to this device may void the
authority of the user to operate it.
All trademarks acknowledged.
HID is a registered trademark of HID Corporation.
Specifications
Input voltage: 9-14V.
Input current: 100mA.
Operating temperature: -4 to 150°F (-20 to 70°C)
without heater.
Operating humidity: 15 to 90%, non-condensing.
Maximum read range: 4" (10cm).
Approvals: EN50133, R&TTE, IP656.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:05:22 17:04:06Z
Creator                         : CorelDRAW(TM) Classic
Modify Date                     : 2003:06:23 22:20:10+02:00
Page Count                      : 2
Creation Date                   : 2003:05:22 17:04:06Z
Producer                        : Acrobat Distiller 4.05 for Windows
Mod Date                        : 2003:06:23 22:20:10+02:00
Metadata Date                   : 2003:06:23 22:20:10+02:00
Title                           : \\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\s820.eps

EXIF Metadata provided by EXIF.tools