G4S Technology S821E S821 Enrolment Reader User Manual User and installation instructions

G4S Technology Limited S821 Enrolment Reader User and installation instructions

User and installation instructions

Installation and User Instructions for S821 Enrollment Readers1Cable ConnectionThe S821 enrollment reader is used to encode TexasInstruments (ISO 15693) smart cards using the"smartMAX" format.TMInsert the jack pluginto the box on theend of the readercable.Insert the powerplug into.the box onthe end of thereader cableConnect the 12Vdcpower source to themains supply.Connect to a serial portof a PC installed with theSMS software. Set up theport in the Install/ClientPorts screen of the SMSsoftware.
9600-0393. Installation and User Instructions for S821Enrollment Readers, Issue 1.0x1 10th March 2004. Group 4Technology, 2004.FCC Notice: This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) thisdevice must accept any interference received, includinginterference that may cause undesired operation.Any unauthorized modification to this device may void theauthority of the user to operate it.All trademarks acknowledged. Texas Instruments is atrademark of Texas Instruments Incorporated.©SpecificationsInput voltage: 9-14V.Input current: 110mA @ nominal 12Vdc supply.Operating temperature: -13 to 158 F (-25 to 70 C).Operating humidity: 15 to 90%, non-condensing.Maximum encoding range: 3" (75mm).Approvals: EN50133, R&TTE, IP656.For internal use only.°°2Enrollment ProcedureTo encode a card:1. Log in to the SMS software at the PC that the reader is connected to.2. Start the enrollment procedure from the appropriate screen in the SMS software. For example,if you are using a standard client, use the button in .3.Encode the Card Holders screenWhen prompted, present the card to the encoder. You will hear a "bleep" when the card hasbeen encoded.

Navigation menu