G4S Technology S822E S822 Enrolment Reader User Manual

G4S Technology Limited S822 Enrolment Reader

User manual

Installation and User Instructions for S822 Encoders1Cable ConnectionThe S822 encoder is used to encodeblank HID i smart cards tothe "smartMAX" format, or to re-encode existing "smartMAX" formati cards.CLASSCLASSTM®Insert the jack pluginto the box on theend of the encodercable.Insert the powerplug into.the box onthe end of theencoder cableConnect the 12Vdcpower source to themains supply.Connect this RS232-to-RS485 converter to aserial port of a PCinstalled with the SMSsoftware. Set up the portin the Install/Client Portsscreen of the SMSsoftware.
9600-0395. Installation and User Instructions for S822Encoders, Issue 1.0 28th April 2004. Group 4 Technology,2004.HID is a registered trademarkof HID Corporation. i is a trademark of HIDCorporation.FCC Notice: This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) thisdevice must accept any interference received, includinginterference that may cause undesired operation.Any unauthorized modification to this device may void theauthority of the user to operate it.All trademarks acknowledged.CLASS©SpecificationsInput voltage: 9-15V.Input current: 260mA @ nominal 12Vdc supply.Operating temperature: -13 to 158 F (-25 to 70 C).Operating humidity: 15 to 90%, non-condensing.Maximum encoding range: 1" (25mm).Approvals: EN50133, R&TTE, IP656.For internal use only.°°2Encoding ProcedureTo encode a card:1. Log in to the SMS software at the PC that the encoder is connected to.2. Start the encoding procedure from the appropriate screen in the SMS software. For example, ifyou are using a standard client, use the button in .3.Encode the Card Holders screenWhen prompted, present the card to the encoder. You will hear a "bleep" when the card hasbeen encoded.- Lit when power is supplied to the encoder.- Lit when the encoder has received data.Beeps once when the card has been encoded successfully.LEDs:Sounder:RedGreen

Navigation menu