GD Midea Air conditioning Equipment MDNA18 WiFi Smart Kit User Manual 1

GD Midea Air-conditioning Equipment Co.,Ltd. WiFi Smart Kit 1

user manual

USER MANUAL OF SMART KitCE-OSK20120180511Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart Devices. Please contact the original provider to get further help.NOTE:IMPORTANT NOTE:Read the manual carefully before installing orconnecting your Smart kit. Make sure to save this manual for future reference.
Peoples Republic of ChinaProduct name: Smart KitModel：CE-OSK201FCC ID: 2ADQOMDNA18IC: 12575A-MDNA18This device complies with Part 15 of the FCC Rules and RSS 247 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. Changes or modifications not expressly approved by theparty responsible for compliance could void the user'sauthority to operate the equipment.This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequencyexposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Company name/address: GD Midea Air-Conditioning Equipment Co.,LtdAdd: Midea Industrial District , Beijiao ,Shunde, Foshan, Guangdong ,
CONTENTSModel: CE-OSK201Standard: IEEE 802.11b/g/nAntenna Type: Wxternal omnidirectional Antenna，Frequency:WIFI：2412-2462MHz Maximum Transmitted Power: 20dBm MaxO O O OOperation Temperature:0 C~45 C/32 F~113 F.Operation Humidity:10%~85%Power Input: DC 5V/300mA12SPECIFICATIONPRECAUTIONS1SPECIFICATIONPRECAUTIONS....................................................1DOWNLOAD AND INSTALL APP ...........................2INSTALL THE SMART KIT .....................................3USER REGISTRATION .........................................4NETWORK CONFIGURATION ...............................5HOW TO USE APP ..............................................13SPECIAL FUNCTIONS ........................................15...................................................123456781Applicable system: IOS, Android. Note: APP can not support the latest software version of Android and IOS system.Due to special situation may be occurred, we explicitly claims below: Not all of the Andriod and IOS system are compatible with APP. We will not be responsible for any issue as a result of the incompatibility. Wireless safety strategy Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption . WPA-PSK/WPA2-PSK encryption is recommended. CautionPlease Check The Service Website For More Information.Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well. Due to different network situation, sometimes, request Hereby, we declare that this smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted with sales agent.DECLARATION OF CONFORMITY
DOWNLOAD AND INSTALL APPINSTALL THE SMART KIT342 3Remove the protective cap of the smart kitOpen the front panel and insert the smart kit into the reserved interface.Insert Attach the QR code packed with SMART KIT to the side panel of the machine, ensure it is convenience to be scanned by the mobile phone. Alternatively, user can take picture of the QR Code and save in into their own phone.123Due to different network situation, control process may return time-out sometimes. If this situation occurs, the display between board and App may not be the same,please do not feel confused.NOTE: Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart Devices. Please contact the original provider to get further help. Android Phone users: scan QR Code A or go to google play, search 'Nethome Plus' app and download it. I phone Users: scan QR Code B or go to App Store, search 'Nethome Plus' app and download it. Caution: QR Code A and QR Code B is only available for downloading APP.QR Code A QR Code B WARNING:This interface is only compatible with SMART KIT provided by the manufacturer.time-out could happen, thus, it is necessary to do network configuration again.
( )Legal E-mail address(Password : 8 numbers + one letter minimum)(Retype password)(Continue)(Login with existing user)Enter E-mai Address and passowrd, press continue (Enter First Name)(Enter Last Name)(Enter Mobile Phone)(Enter City)(Enter Street)(Enter Number)(Agree to terms)(Marketing)(Register)USER REGISTRATION NETWORK CONFIGURATION564 51212234Enter your personal informationand adress, and then click Register .无S IM卡08:42VI50828_aForgot password?65%Sign in Please ensure your mobile device is connected to Wifi router. Also, the Wifi router has already connected to Internet before doing user registration and network configuration. It is better to log in your email box and active your registration account by clicking link in case you forget the password.Caution: It is necessary to forget any other around network and make sure the Android or IOS device just connect to the WIFI network you want to configure. Make sure the Android or IOS device WIFI function works well and can be connected back to your original WIFI network automatically. Kindly reminder: ''''When AC enters into AP mode, the air-conditioning remote controller can't control it. It is necessary to finish network configuration or power the AC again in order to control it. Alternatively, you need to wait 8 minutes to let the AC quit AP mode automatically. Using Android device to do network configuration Make sure your mobile device has already been connected to the wifi network which you want to use. Also, you need to forget other irrelevant wifi network in case it influences your configuration process. Disconnect the power supply of AC. Connect the power supply of AC, and continuously press the digital display button or do not disturb button seven times in 3 minutes. When the AC displays AP , it means that the AC WIFI has already entered into AP Mode.''''Some type of AC do not need the step to be in AP mode
(Scan QR)2 QR codes to be scanned: IDU QR which is pasted on IDUand Wi-Fi QR which is packed with the Wi-Fi module(Manual QR)This is the Manual Entering QR page in case of Camera failuer(Mac Address)(Serial number)(Continue)Wi-Fi is connecting
Choose net_ac_XXXXType default password:net_ac_XXXX Name the A/C and press continue6 7
(1st QR Scan)(Manual QR)(2nd QR Scan)(Manual QR)Two QR codes to be scanned:IDU and Wi-Fi QR which is packed with the Wi-Fi moduleIDU QR which is pasted on IDU and Wi-Fi QR which is packed with Wi-Fi This is the Manual Entering QR page in case of Camera failuer89 Using IOS device to do network configuration Make sure your mobile device has already been connected to the wifi network which you want to use. Also, you need to forget other irrelevate wifi network in case it influences your configuration process. Disconnect the power supply of AC(some units). Connect the power supply of AC, and continuously press the digital display button or do not disturb button seven times in 3 minutes. When the AC displays AP , it means that the AC WIFI has already entered into AP Mode.''''1234
Type default password:net_ac_XXXX Name your a/c and click continue Type default password:net_ac_XXXX and click "Join " Return to APP and type net_ac_XXXXChoose net_ac_XXXXSettings WLANCHOOSE A NET WORK.....ASUS-5GXASUS-2.4GXbdptest1bdptest1-5GHIWIFI-22EF60Mideamidea_fc_6866MideaACIOTnet_ac_0010zztestNo S IM20:14 61%10 11Joining net_ac_0010 ...." "No S IM20:14 61%Cancel JoinEnter PasswordPassword

Navigation menu