GDU Tech PD-RC03-0301 GDU Remote Controller User Manual

Prodrone Technology (Shenzhen) Co., Ltd GDU Remote Controller

User manual

GDU O2 user manual Aircraft The GDU O2 aircraft, featuring innovative sliding metal arm, aircraft and controller are combined in one, making it portable to carry, easy to use. The three-axis mechanical gimbal camera can capture 4K videos and 13.25 megapixel photos; and it is equipped with advanced binocular vision system, support intelligent obstacle avoidance, visual tracking, gesture recognizing, and other funny functions. 1. Integrated gimbal Camera 7.Head LEDs 2. Downward Vision System 8. Propellers 3. Forward Vision System 9. Intelligent Battery 4. Parameter adjustment/ Data Interface (Micro USB) 10. Battery Level indicators 5. Motors 11. Power Button 6.Tripods 12. Tail LEDs Remote Controller O2 remote control is using pulling slide design, making it easy to place mobile devices. It can offer a long-range and real-time data transmission, maximum distance of 2 kilometers. Maximum working time is 1.5 hours.
Unfolded Remote Controller 1. LCD Screen 9. Power Button 2. Control sticks 10. Gimbal yaw dial 3. Antennas 11. Gimbal pitch dial 4. Flight Mode Switch 12. Shutter Button 5. One-button Take-off/Vertical landing 13. Record Button 6. RTH Button 14. Customizable Button C1 7. Power Port (Micro USB) 15. Customizable Button C2 8. USB cable Port 16. Remote Lock/unlock Button The remote controller can reach to its maximum transmission distance (FCC standard) in a wide open area with no electro-magnetic interference, and at height of 120m (400 feet). The maximum run-time is tested under laboratory environment, only for your reference. Specifications Aircraft Take-off weight (without cover) 703 g Take-off weight (with cover) 820g Max Ascent Speed 5m/s (Sport mode) Max Descent Speed 3m/s Max horizontal speed 15m/s (Sport mode, without wind) Max flight altitude 3500m( 11482 feet) Max Hovering Time 20 minutes (without wind) Max Flight Distance 13km (without wind) Operating Temperature 0℃ to 40℃ Satellite Positioning system GPS/GLONASS (dual modules)
Gimbal Controllable range Pitch: -80°~30° Roll : -30°~30° Yaw : -30°~30° Forward Vision System Sensing range 0.5 to 15 m Operating Environment Obstacle with clear texture and adequate lighting ( lux>15 Common room lights) Downward Vision System Velocity Range ≤10m/S（2m above ground，adequate lighting） Altitude Range 0.3 to 13 m Hovering range 0.3 to 13 m Operating Environment Floor with clear texture and adequate lighting ( lux>15 Common room lights) Camera Image Sensor 1/3 inch CMOS Effective pixels : 13.25 Megapixels Lens FOV 75°, 28 mmf/2.2 , Focus range: 0.5 m to ∞ Distortion <1.5% ISO Range 100 – 3200 (Video): 100 – 1600 (Photo) Shutter Speed 8-1/8000 s Max Photo Resolution 4000×3000 Video Recording Modes 4K: 3840×2160 @30/25fps 1080P:1920×1080@30fps 720P:1280×720@30fps Max Video Storage Stream 60Mbps Photo format JPG
Video format MP4 Supported SD card 32GB Remote Controller and Aircraft Digital transmission frequency Operating Frequency 5.745GHz - 5.810GHz Max Transmission distance 2km Operating Temperature 0- 40℃ WIFI (Image transmission) Transmitting frequency 2.412GHz - 2.462GHz Control distance >1000m Supported protocols and standards 802.11 b /802.11 g /802.11 n 20 Battery 1200mAh Working voltage 7.6 V Supported Connector Port Lightning, Micro USB, Type-C Charger Voltage 13.05 V Rated Power 39.15 W Intelligent Battery Capacity 4000 mAh Voltage 11.4 V Battery Type LiPo 3S
Energy 45.6 Wh Net Weight Approx 240 g Max charging Power 78W Notice： In order to avoid property loss or personal injury, please read through the following messages carefully before using the drone for the first time: Warnings: - The Quick Start Guide is designed to help the user to perform the first flight. For more flight experience, please read the User Manual online. - It is prohibited for those who under 18 to use this product. - It is prohibited to use this product in heavily populated areas. - It is prohibited to use this product in legally restricted areas. - Please put the product out of children’s reach. - It is prohibited to use this product when you are drunk, tired or in poor spiritual conditions. - Please fly the drone in open outdoor space during good weather. - All the images shown in this document are just for reference; subject to our available products for more details. 1. Download the GDU Mini App and Watch the Tutorial Videos Search for “GDU Mini” on the App Store or Google Play, or scan the QR code to download the app on your mobile device. *Watch the tutorial videos at www.gdu-tech.com or in the GDU Mini App. GDU Website GDU Mini APP
* GDU Mini APP required system version equal or above iOS9.0, Android4.4 . 2. O2 Detachment & Combination Detachment：Before operating O2, please unlock the limit switch of remote controller; then use index finger to push the mobile end (where the C2 customizable button is on its back); remove the remote controller and separate it from the drone; seen the pictures below Combination： When packing O2, please unlock the limit switch of remote controller; then make green& red points at the bottom of aircraft to be in parallel with mobile phone locking position on the controller; push the mobile end (where the C2 customizable button is on its back) of the controller and press the aircraft down slightly. Finally lock the limit switch of remote controller. 3. Check the Battery Levels: Check the battery levels of aircraft: short press the power button to check the battery level. Press one time first, and then press and hold the power button for another 2 seconds to power on/off the
intelligence battery. Check the Battery Levels of remote controller: Press and then hold the power button for three seconds to turn on the remote controller. Check the battery level on screen (left side for remote controller; right side for aircraft). Then again press and hold the power button for three seconds to turn off the remote controller. 4. Charge the Batteries Remove Intelligent Battery
Input voltage: 100-240V Charge Time: 2 Hours Charge Time: 2 Hours 5. Prepare the Remote Controller 1） Unfold the Remote Controller Antenna Strong signal Weak signal 2） Unlock the Remote Controller 3） Take out the right connecting cable, and get the smaller end go through the slot first.
4) Lock the phone to its proper position and connect the larger end of the cable with the phone charging port; make sure the backward switch is locked. 5) After use, please remove the mobile phone, and fix the connecting cable in the card hook
6. Prepare the Aircraft 1) Remove the gimbal protective cover. * The gimbal protective cover is used to protect the gimbal; make sure the gimbal protective cover is removed when you are ready to use the aircraft. 2) Unfold the arms and the propellers；
3) Install intelligent battery 7. Prepare for Takeoff Power on Remote Power on Aircraft Launch GDU Mini App * Ensure the arms and propellers are unfolded before taking off. * The GDU O2 can be controlled by using the Remote Controller or the GDU Mini app. To switch control mode, please restart the aircraft and then select control mode switch and the corresponding device. 8. Flight a) Switch the flight mode to standard mode. The default setting of remote control is American mode.
b) Take off Take off: Move the control sticks in the toe-in directions to unlock the aircraft and activate the motors； Push left stick up slowly to take off. Or press the AUTO TAKEOFF button on the remote controller. Landing: push left stick down slowly until the aircraft lands on the ground. Hold a few seconds until the motors stop. Or press the RTH button on the remote controller. Unlock the Aircraft Unlock the aircraft motor (Toe –in) Take off: ① push left stick up slowly Or ② Press take-off button on Remote controller Landing: ① push left stick down slowly until Aircraft lands on the ground, and motors stopped
Or ② Press the RTH button smoothly The default setting of remote control is American mode (including virtual buttons). The left stick controls the aircraft’s altitude and rotation, while the right stick controls its forward, backward, left and right movements. *The motors can only be stopped mid-flight when the flight controller detects critical error. 2) Controlling flight with GDU Mini app. 1) Power on the aircraft 2) Turn on your mobile device‘s Wi-Fi, and connect to GDU-02-A-xxx through entering the Wi-Fi Password: 12345678 3) Launch the GDU Mini app, then click to start shooting into the flight interface. 4) Tap One-button Take-off and the aircraft will hover at 2m height. At the same time the virtual sticks will show up on the screen, it can control the flight. GDU Mini App Operation Interface: 1） Shot mode: smart shot and classic shot mode. Smart shot mode is
designed for beginners and classic shot mode is for professionals. Smart Shot Mode Classic Shot Mode 2) Classic Shot Mode 1. Home 5.Waypoint 9. Media in Cloud 2. Settings 6. RTH 10. Photo/Video switch Button 3. Left stick 7.Auto landing 11.Photo/Video Button 4. Right stick 8. Camera settings 12. Dail for pitching 3) Route Planning
1. First Page 5.Auto Landing 9. Current location 2. Settings 6. Erase 10. Map Switch 3. Route planning/Real-time page exchange 7.Electronic fence 4. RTH 8. Plan Waypoints *Please watch the tutorial videos on GDU Mini app or GDU official website www.gdu-tech.com so that you can handle the aircraft and use the functions of intelligent following properly. 4) Instructions for Smart Mode 1. First Page 5.One-button Take-off 9. Media Cloud 2. Settings 6. RTH 10. Photo & Video Switch 3. Left Stick 7. Auto Landing 11.Photo/Video Button 4. Right Stick 8. Camera Settings
10. Fly Safe Open Areas Strong GPS signal Keep Within sight Height under 120m (400 feet) Please fly the drone in wide-open area with good weather and strong GPS signal, and always keep the drone within your sight. Keep the height under 120m (400 feet). For the safety of you and others around you and the environment, it’s very necessary to know No Fly Zone and basic flight guidelines. Please read the Disclaimer carefully. FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. GDU O2 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. GDU Remote Controller This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu