GE HUMAN ELECTRONICS ITAG Anti-Lost Device User Manual Manual

SHENZHEN SAGE HUMAN ELECTRONICS CO.,LTD Anti-Lost Device Manual

Contents

Manual

User ManualThank you for choosing the smart anti-lost products iTag based onBluetooth. iTag is a kind of Bluetooth Low-energy product which based on the newest Bluetooth. It can chain user’s easy-lost & valuable belongings (such as keys, handbags etc.), kids or pets together with smart phones through specified App software within a setting Bluetooth connection distance. In the effective distance it can realize the functions of anti-lost, looking for smart phones, self-portrait and voice recording. The effective distance of iTag is 75 Feet in open range without barrier.With this device, your belongings, kids and pets won’t leave your attentionsany more.iTag use CR2032 Lithium Coin Battery which is easy to get frommarkets, and it works for almost half a year.Switch on/offSwitch on: Press and hold the button on iTag for 3 seconds until youheard the Beep twiceSwitch off: Press and hold the button on iTag for 3 seconds until the long“Beep” sound.
Connection1. iTag will connect the smart phone automatically when power on, if itshows “disconnected” on the App, please click the “Connect” button toconnect it again.2. Click the button “ ” to find more connectable iTag devices, suchas car keys, bags and so on. (Note: Click the arrow icon will turn tosubmenu, such as add photo for iTag, rename and set the ring tone etc.)3. Press the button to enter into “Delete” submenu to remove theitem which you don’t need, or slide this item to left on “device list”interface, click “–” to remove it out of the device list.Do Not Disturb ModeOn the “Setting” interface, switch “Do not disturb” on, alert function of alldevices will be shut down.
On the “Device” interface, enter into submenu “iTag” item, click “Anti lost”to set a unique feature for alert function for each iTag, such as shut off thealert for one of connected iTag.Setting for AlertAs shown in the image1. Double click the button on iTag to trigger the alert on the smart phone.2.Click the red flash button to stop the phone alert.3.Click “Alert” button, iTag alerts, and click the “Stop Alert” will stop thealert from iTag.PhotographAs shown in the imagePress the “Photograph” button, it will turns to camera mode.1. Press top right and left to set the flashlight and camera:
2. Press the button on the right button, you can set for burst shootingand interval timer shooting.Press the button on iTag once, it works as a remote shutter to take photos.LocationAs shown in the image
Location list: when you pack your car, press the button on iTag, it willmarks your current location on the map. Press the “Location list” and youwill find where your vehicle is with easy tracking when you leave any big orunderground parking lotLost history: If the iTag is lost, A pin-drop will be marked automatically onMap to tell you the site it was lost. just press “lost history” to find therecord.Remark: To delete the list, just scroll left the list and press the “Delete”menuSettingIn order to experience the functions of iTag better, enter into the settingmenu to set for your iTag.As shown in the image
CAUTION:

Navigation menu