GE MDS DS-EL805 MDS TransNet 900 User Manual Transnet addendum sample

Download:
Mirror Download [FCC.gov]
Document ID	277320
Application ID	jwXD9mo9YB3slJhrcKtNgw==
Document Description	User Manual Addendum
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.14kB (139203 bits)
Date Submitted	2002-10-16 00:00:00
Date Available	2002-11-13 00:00:00
Creation Date	2002-10-11 10:34:12
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-10-11 10:34:12
Document Title	Microsoft Word - Transnet addendum sample_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	danhuynh

MDS Transnet EL805 Transceiver
ADDENDUM
Addendum to MDS 05-2873A01
October 11 2002
Microwave Data Systems Inc., 175 Science Parkway, Rochester, NY 14620 U.S.A.
General Business +1 (585) 242-9600, FAX +1 (585) 242-9620
This addendum contains corrections to the MDS TRANSNET EL805 User’s Guide MDS P/N 05-2873A01,
published in March 2002. The Bolded text below indicates new or revised material. You may wish to make these
pen & ink changes directly to your manual or include a reference to this addendum in the appropriate sections.
ITEM 1—RF Exposure Notice
The following statement replaces the text under RF Exposure notice
The radio equipment described in this guide emits radio frequency energy. Although the power level is low, the
concentrated energy from a directional antenna system may pose a health hazard. Do not allow people to come
closer than 23 centimeters (9.05 inches) to the antenna when the transmitter is operating in indoor or outdoor
environments. More information on RF exposure is available at www.fcc.gov/oet/info/documents/bulletins.
ITEM 2—Approvals
UL approval has been granted to the TRANSNET transceiver, provided it is used with an MDS-supplied locking
DC power connector. Contact MDS for additional information or upgrade instructions.
ITEM 3—Internal Fuse Replacement
Reverse polarity will not cause the transceiver’s fuse to blow.
ITEM 4— Antenna Feedline Selection
When using RG-214 feedline with an MDS-supplied omni-directional antenna, the following cable lengths and
appropriate cable loss must be adhered to maintain compliance with the FCC maximum limit of +36dBi.
Example, a 3 meter length of RG-214 will loose 1 dB at 928Mhz, thus the 5dBd (7dBi) antenna tested for this
application was 3.1 meters.
Antenna spec.(dBd)
Antenna Gain (dBi)
Unity
3 dBd
5 dBd
2.15
5.15
7.15
Minimum Cable Loss (dB) Max +36dBi
1.0 (3 meters)
1.0 (3 meters)
1.2 (3.1 meters)
+31.15dBi
+34.15dBi
+35.95dBi
In no case shall the user allow the EIRP of the TransNet installation to exceed 36 dBi
End of Document
MDS 05-2708A01, Rev. A
Page 1 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:10:11 10:34:12-04:00
Modify Date                     : 2002:10:11 10:34:12-04:00
Page Count                      : 1
Creation Date                   : 2002:10:11 14:34:12Z
Mod Date                        : 2002:10:11 14:34:12Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : danhuynh
Metadata Date                   : 2002:10:11 14:34:12Z
Creator                         : danhuynh
Title                           : Microsoft Word - Transnet addendum sample_.doc

EXIF Metadata provided by EXIF.tools