GE MDS DS-NH900 MDS iNet 900 User Manual INET update jpg

GE MDS LLC MDS iNet 900 INET update jpg

Contents

User Manual Amended Page for RF Exposure Information

Download: GE MDS DS-NH900 MDS iNet 900 User Manual INET update jpg
Mirror Download [FCC.gov]GE MDS DS-NH900 MDS iNet 900 User Manual INET update jpg
Document ID251774
Application IDjOCtdTiu3W+tEBkm7C5JPw==
Document DescriptionUser Manual Amended Page for RF Exposure Information
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.53kB (144132 bits)
Date Submitted2002-06-21 00:00:00
Date Available2002-07-09 00:00:00
Creation Date2002-06-21 10:11:45
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2002-06-21 10:11:45
Document TitleINET update.jpg
Document CreatorPScript5.dll Version 5.2
Document Author: danhuynh

®§Laf=m Review Draft 3—12/17/01
Operational Safety Notices
The radio equipment described in this guide emits
RF ExPosure radio frequency energy. Although the power level
is low. the concentrated energy item a directional
((( u 0) antenna may pose a health hazard. Do not allow
1 people to come closer than 23 centimeters to
the antenna when the transmitter is operating.
This manual is intended to guide a professional installer in installing. oper-
ating and performing basic systcm maintenance on the described equipment.
FMIULICSA Notlco
MDS War 900 When Approved
This product is available for use in Class I, Division 2. Groups A. B. C 34 D Hazardous
Locations. Such locations are defined in Article 500 of the National Fire Protection
Association (NFPA) publican'on NFPA 70, otherwise known as the National Elec-
u-ical Code.
The transceiver has been rccoytized for use in these hazardous locations by three
independent agencies —Underwritcrs Laboratories (UL). Factory Mutual Research
Corporation (FMRC) and the Canadian Standards Association (CSA). The UL certi-
fication for the transceiver is as a Recognized Component for use in these hazardous
locations, in accordance with UL Standard 1604, The FMRC Approval is in accor-
dance with FMRC Standard 36l l. The CSA Certification is in acwrdancc with CSA
STD C221 No. 213-MI987.
FMIULICSA Conditions of Approval
MDS War 900 When Approved
The transceiver is not acceptable as: stand-alone unit for use in the hazardous local
lions described above. It must either be mounted within another piece nfcquipment
which is certified for hazardous locations. or installed within guidelines. or conditions
of;plpltmval, as set forth by the approving agencies. These conditions ofappmval are
as o ows:
I, The transceiver must be mounted within a separate enclosure which is suitable
for the intended application.
2, The antenna feedlinc, DC power cable and interface cable must be routed
through conduit in accordance with the National Electrical Code.
3, Installation, operation and maintenance of the transceiver should he in accor-
dance with the lransceivet‘s installation manual. and the National Electrical
Code.
4. Tampering or replacement with non-factory components may adversely affect the
safe use ofthe nansceiverin hazardous locations, and may void the approval.
2 installation Guide MDS 05—2873A01. Rev. D3

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:06:21 10:11:45-04:00
Modify Date                     : 2002:06:21 10:11:45-04:00
Page Count                      : 1
Creation Date                   : 2002:06:21 14:11:45Z
Mod Date                        : 2002:06:21 14:11:45Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : danhuynh
Metadata Date                   : 2002:06:21 14:11:45Z
Creator                         : danhuynh
Title                           : INET update.jpg
EXIF Metadata provided by EXIF.tools
FCC ID Filing: E5MDS-NH900

Navigation menu