GE Power Electronics BLST-SP77X Electric Discharge Lamp Control Equipment User Manual Manual

GE Power Electronics (Shanghai) Co., Ltd. Electric Discharge Lamp Control Equipment Manual

Manual

Datasheet April, 2011 Electronic Ballast for Electrodeless Fluorescent Lamp SP779-Y01A 150W & SP780-Y01A 200W LINEAGE POWER 1 Description Specifications Items SP779-Y01A 150W SP780-Y01A 200W Electronic Input Voltage Range 90 ~305Vac Input Frequency Range 47 ~ 63Hz Rated Input Current 120Vac/277Vac 1.5A/0.59A 1.9A/0.8A Inrush Current ≤60Apk ≤65Apk Efficiency (120Vac) ≥ 90% ≥ 90% Rated Lamp Current 0.81A 0.96A Rated Lamp Voltage 190Vac 210Vac Uout 300V Power Factor > 0.95 THD < 15% Output Operation Frequency 230K ± 30kHz Protection*1 No load , load short and lamp removed Environmental Ambient Operating Temperature*2 (Ta) -40 - 60℃ Max case Temperature (Tc) 70 ℃ Usage*3 In Fixture Only SP779-Y01A and SP780-Y01A electronic ballasts for electrodeless fluorescent Lamp offer improved energy efficiency. The electronic ballasts are extremely robust, using the high quality components, and extremely efficient. There allow them to run at an ambient temperature from -40℃ to +60 ℃ and at maximum case temperature of 70℃. In addition, input voltage fluctuations do not affect the Ballast’s output power, ensuring steady light output within the entire specified voltage range. The Electronic Ballasts are designed with a variety of safeguards to protection. The ballast meets with UL.
Datasheet April, 2011 LINEAGE POWER 2Electronic Ballast for Electrodeless Fluorescent Lamp SP779-Y01A 150W & SP780-Y01A 200W Specifications (Continued) Isolation Isolation Resistance Isolation Voltage > 200MΩ 1600Vac Max Ignition Voltage 2000Vpeak 2350Vpeak Emission*4 FCC Part 18 Safety Standards UL935 Approvals*5 UL Other General Standards QB/T2871 Service Life 5 Years (Rated Input Voltage, Ta= 40℃) RoHS*6 RoHS 5/6 Compliance Physical Cooling Nature Cooling Dimensions (L X W X H) 212.0 X 89.0 X 48.0 mm Weight 0.91kg 1. Reset method: power off and waiting for over 15second, then power up again. 2. Generally the ballast is set up in the lamps and lanterns to use, the ambient temperature of ballast is -40--60℃ in lamps and lanterns, use low temperature lamp under -20℃. 3. For installation, please refer to installation manual. 4. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45–30MHz. 5. Those products have been evaluated for using in TYPE 1 OUTDOOR; belong to CLASS P PROTECTED, INHERENT THERMAL PROTECTION BALLAST; Earthing connection essential before connecting AC supply. 6. Please contact Lineage Power representative if need RoHS 6 compliance products.
Datasheet April, 2011 LINEAGE POWER 3Electronic Ballast for Electrodeless Fluorescent Lamp SP779-Y01A 150W & SP780-Y01A 200W Dimensions (mm) Ordering Information Item Description Comcode EP200_LL electronic ballast for 200W lamp CC109163845 EP150_LL electronic ballast for 150W lamp CC109164356 If additional information is needed, please consult with your Lineage Power representative for more details. Lineage Power (Shanghai) Co., Ltd +86 021 54279977 www.lineagepower.com Address: 1-2F, Building #58, No. 461 Hongcao Road, Caohejing Hi-Tech Park, Shanghai 200233,China Lineage Power reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. © 2011 Lineage Power (Shanghai) Co., Ltd. All International Rights Reserved. Revision: 1.0

Navigation menu