GE Transportation 84A237140 Gateway User Manual

GE Transportation Gateway Device PS

a href="https://usermanual.wiki/GE-Transportation" itemprop="url"> GE Transportation >

User Manual

GE Transportation Systems RF Gear Case Sensor 6/3/15 Installation Instructions Rev. A1 Author: David Petersen Approval: Sethu Madhavan 84A234272AB Issued: GET Engineering, 6/21/13 BUS. AREA: Loco Sheet 1 of 31 This Drawing is the Property of GENERAL ELECTRIC COMPANY, TRANSPORTATION SYSTEMS DIVISION. This drawing is loaned upon the express condition that it shall not be reproduced in any manner, and shall be returned upon demand. It is submitted for evaluation purposes and it, and the information contained therein, shall not be otherwise used nor disclosed to third parties without written permission of General Electric Co. DHMS Installation and Programming Instructions Revision History Revision Date DSRVW Author Description of Revision A NA D. Petersen Added FCC , programming, troubleshooting updates. Table of Contents 1.0 INTRODUCTION ........................................................................................................................................... 2 2.0 SENSOR INSTALLATION............................................................................................................................ 6 3.0 SENSOR REMOVAL (When Applicable) ..................................................................................................... 9 4.0 GATEWAY INSTALLATION AND WIRING ........................................................................................... 10 5.0 SENSOR PROGRAMMING & VALIDATION .......................................................................................... 15 6.0 READING OIL LEVELS DURING LOCOMOTIVE MAINTENANCE CYCLES ................................... 16 7.0 UPDATING SENSOR & GATEWAY FIRMWARE ................................................................................... 17 8.0 TROUBLESHOOTING ................................................................................................................................ 24 9.0 DATA LOG DOWNLOAD .......................................................................................................................... 29 APPENDIX A: LOADING DHMS SOFTWARE ON A PC .................................................................................... 30 APPENDIX B: SOFTWARE VERSION CONTROL AND MANAGEMENT ....................................................... 31
GE Transportation Systems RF Gear Case Sensor 6/3/15 Installation Instructions Rev. A1 Author: David Petersen Approval: Sethu Madhavan 84A234272AB Issued: GET Engineering, 6/21/13 BUS. AREA: Loco Sheet 2 of 31 This Drawing is the Property of GENERAL ELECTRIC COMPANY, TRANSPORTATION SYSTEMS DIVISION. This drawing is loaned upon the express condition that it shall not be reproduced in any manner, and shall be returned upon demand. It is submitted for evaluation purposes and it, and the information contained therein, shall not be otherwise used nor disclosed to third parties without written permission of General Electric Co. 1.0 INTRODUCTION This document outlines the steps required to install, remove, and program the RF Gear Case Sensor (RGS) and gateway onto a locomotive. These sensors and gateway are designed to collect and transmit gear case oil data while in line-haul service. Follow all shop safety rules when working on or under the locomotive. FCC Compliance and Notification GE Part Numbers: 84A237140P1, DHMS Gateway 84A234628P1, RGS Sensor FCC ID: new number (Pending approval) These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) These devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation. Changes or modifications to the DHMS Gateway or Sensor are prohibited. Any changes made to these devises without the written approval by GE Engineering could void the user's authority to operate this equipment. Per RSS-Gen, Section 8.4, this device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device -------------------------------------------------------------------------- Par RSS-Gen, la section 8.4, cet appareil est conforme aux normes Industrie Canada RSS exemptes de licence. Son fonctionnement est soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. Les modifications apportées à la passerelle DHMS ou le capteur sont interdits. Les modifications apportées à ces dispositifs sans l'approbation écrite par GE Ingénierie pourraient annuler l'autorité de l'utilisateur à utiliser cet équipement. 1.1 Acronyms BS Battery Switch DHMS Drive Train Health Monitoring System FCC US Federal Communications Commission GE General Electrical MBS Maintenance Battery Switch RGS RF Gear Case Sensor
Download:
Mirror Download [FCC.gov]
Document ID2680325
Application IDTGutlxHm4MtnAwwV2EdTgg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize148.99kB (1862366 bits)
Date Submitted2015-07-15 00:00:00
Date Available2015-07-15 00:00:00
Creation Date2015-06-16 10:24:29
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2015-06-16 10:24:29
Document TitleDevice PS Template
Document CreatorMicrosoft® Word 2013
Document Author: Administrator
FCC ID Filing: 2AE6484A237140

Navigation menu