GE Ultrasound Korea ARC Attachable Remote Controller User Manual ARC manual english

Download:
Mirror Download [FCC.gov]
Document ID	1016887
Application ID	FKrvEZM1C92BmHhCUxjPqA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.3kB (203804 bits)
Date Submitted	2008-10-17 00:00:00
Date Available	2009-04-15 00:00:00
Creation Date	2008-10-01 18:59:30
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-10-01 18:59:30
Document Title	Microsoft Word - ARC_manual_english.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	LKT

ARC(Attachable Remote Controller) User Manual
Section 1 Overview
Section 1-1 Purpose
This manual describes the operating procedure for ARC(Attachable Remote Controller) in
system.
Section 1-2 Simple Block Diagram
ARC is consist of Bluetooth module and Recharge module. Bluetooth module can transfer data
with 2.4GHz . Recharge module is supported by USB 5V. Operating battery is Li-polymer 3.7V. ARC
board can control 2 kind of Keys which are P1 and Freeze.
Fig.1 ARC Block Diagram
Section 1-3 Parts Required
Description
GPN
Remark
ARC
5318111
Remote Controller
USB type Bluetooth Dongle
5316870
Bluetooth dongle
Recharge cable
5324554
Mini A-type USB Cable
Section 2 Operating procedure
Section 2-1 Recharging procedure
1) Connect recharge cable to ARC module
2) Connect recharge cable to USB port of rear panel.
3) Confirm LED status.
Table1. LED Status
Color
Operating
LED1
Red
Charge in Progress
LED2
Green
LED3
Blue
Pairing and Button response
LED4
Red
Low Battery
Full Charge
Section 2-2 Pairing
1) Turn on System and Press ‘Utility’ button in Keyboard.
2) Click Connectivity and select ‘ADM’ in Title Log In Window.(Fig.2, Fig.3)
Operator : ADM, / Password : empty
Finaly click OK.
3) Click Wireless and select Enable.
4) Press P1+ Freeze buttons of ARC at the same time more than 3 seconds.
5) Confirm blinking blue LED
6) Click Find Device.(Fig.4)
7) Check notification of Address and then click ‘Save’(Fig.5)
8) Check that ‘RC’ icon is to be green low of the left.(Fig.5)
Fig.2 Connectivity in Utility menu
Fig.3 Title Login
Fig.4 Wireless and Find Device
Fig.5 Checking Pairing
Section 2-3 Key Operation
1) Freeze Button is already assigned as Freeze function.
When pressed Freeze button of ARC, Live scan image is stopped.
2) P1 is same function which is defined in utility of Keyboard Button.
For example, if P1 button is assigned BW printer. BW printer will operate when pressed P1
button of ARC.
3) If reset is needed, press Reset button by suitable equipment.
Fig.6 Reset procedure
FCC Requirements
Cautions
Modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance Information
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: 1. This device may not cause harmful interference, and 2. This device must accept any
interference received. Including interference that may cause undesired operation.
Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio Frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:10:01 18:59:30+09:00
Create Date                     : 2008:10:01 18:59:30+09:00
Format                          : application/pdf
Title                           : Microsoft Word - ARC_manual_english.doc
Creator                         : LKT
Document ID                     : uuid:fa39fede-8916-43a6-80a4-8144cec57449
Instance ID                     : uuid:22f6c0d9-c867-4fa3-9983-e5b4719bf024
Page Count                      : 6
Author                          : LKT

EXIF Metadata provided by EXIF.tools