GEMMY 38874 AppLights Spotlight User Manual FCC

GEMMY INDUSTRIES (HK)LIMITED BVI AppLights Spotlight FCC

User Manual_FCC

INSTRUCTIONS E pg.1Congratulations!You are now the proud owner of a LEDLIGHTSHOW. Please read the directions carefully before use.SAFETY WARNINGRemove all plastic fasteners and tags. These are part of the packaging and should be discarded.SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units.WARNINGELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electricalproducts, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord isdamaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.WARNINGStrobe lights have been known to trigger seizures in people with photosensitive epilepsy.IMPORTANT SAFETY INSTRUCTIONSWHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONSSHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. Do not use seasonal products outdoors unless marked suitable for indoor and
pg.2outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. lf one is not provided, contact a qualied electrician for proper installation. 2. This seasonal use product is not intended for permanent installation or use. 3. Do not mount or place near gas or electric heaters, replace, candles or other similar sources of heat. 4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 5. Do not let lamps rest on the supply cord or on any wire. 6. Unplug the product when leaving the house, when retiring for the night, or if left unattended. 7. This is an electric product-not a toy! To avoid risk of re, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 8. Do not use this product for other than its intended use. 9. Do not hang ornaments or other objects from cord, wire, or light string.10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.11. Do not cover the product with cloth, paper or any material not part of the product when in use.12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions(follow product marking for proper fuse rating)and check the product. lf the replacement fuse blows, a short-circuit may be present and the product should be discarded.13. Read and follow all instructions that are on the product or provided with the product.CAUTION: To reduce the risk of re and electric shock:1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.2. Do not mount or support strings in a manner that can cut or damage wire insulation.SAVE THESE INSTRUCTIONSUSE AND CARE INSTRUCTIONS 1. When the product is placed on a live tree,the tree should be well maintained and fresh.Do not place on live trees in which the needles are brown or break off easily.Keep the live tree holder lled with water. 2. If the product is placed on a tree,the tree should be well secured and stable. 3. Before using or reusing, inspect product carefully. Discard any products that have
pg.3cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 4. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress on the product conductors, connections, and wires. 5. When not in use, store neatly in a cool, dry location protected from sunlight.USER SERVICING INSTRUCTIONSTo replace the fuse:1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.3. Remove fuse carefully. Turn fuseholder over to remove fuse.4. RISK OF FIRE. Replace fuse only with 3 Amp, 125Volt fuse (provided with product.)5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.6. RISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.ASSEMBLY INSTRUCTIONS1. Gently remove contents from packaging and lay out in a clear area.2. Secure the stake with handle together. Insert the stake into the ground.(See illustration 1)3. Plug power cord into standard wall socket. (See illustration 2)4. Unplug when not in use.illustration 1illustration 2
CAUTIONTo reduce the risk of re or electric shock, do not attempt to replace lamps or modify string.FOR INDOOR AND OUTDOOR USENOTE: This item is not a toy and should be used for decorative purposes only.CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WARNINGNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for helpThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the user’s authority to operate this equipment.pg.4
THESE INSTRUCTIONS ARE FOR ITEM NUMBER38874pg.5Visit WWW.GEMMY.COM for more information.©2015 GEMMY INDUSTRIES CORP.117 WRANGLER DRIVE. SUITE 100COPPELL, TX 75019 U.S.A.1 (877) 250-9032MADE IN CHINA / PRINTED IN CHINA

Navigation menu