GEMMY 38874 AppLights Spotlight User Manual FCC

Download:
Mirror Download [FCC.gov]
Document ID	2697305
Application ID	e8mBfXDY/bVAI4k68stFSg==
Document Description	User Manual_FCC
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.83kB (185397 bits)
Date Submitted	2015-07-30 00:00:00
Date Available	2015-07-30 00:00:00
Creation Date	2015-07-11 11:13:21
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-07-11 11:13:21
Document Title	User Manual_FCC
Document Creator	Adobe InDesign CS6 (Macintosh)

INSTRUCTIONS
E pg.1
Congratulations!You
are now the
proud owner of a LEDLIGHTSHOW. Please read
the directions carefully before use.
SAFETY WARNINGRemove
all
plastic fasteners and tags. These are part of the
packaging and should be discarded.
SAVE THESE INSTRUCTIONS –
important safety and operating instructions for power units.
This manual contains
WARNING
ELECTRIC PRODUCT. Keep away from children. Not recommended for children
under 3 years of age. As with all electrical
products, precautions should be observed during handling and use to reduce the risk
of electric shock. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive
epilepsy.
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS,
BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED
INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
1. Do not use seasonal products outdoors unless marked suitable for indoor and
pg.2
outdoor use. When products are used in outdoor applications, connect the product
to a Ground Fault Circuit Interrupting (GFCI) outlet. lf one is not provided, contact
a qualified electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplace, candles or other
similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp
hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, when retiring for the night, or if left
unattended.
7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury
and electric shock it should not be played with or placed where small children can
reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may
damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product
when in use.
12. 
This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from the
outlet. Also unplug any additional strings or products that may be attached to the
product. Replace the fuse as per the user servicing instructions(follow product
marking for proper fuse rating)and check the product. lf the replacement fuse
blows, a short-circuit may be present and the product should be discarded.
13. Read and follow all instructions that are on the product or provided with the
product.
CAUTION: To reduce the risk of fire and electric shock:
1. Do not install on trees having needles, leaves or branch coverings of metal or
materials which look like metal.
2. Do not mount or support strings in a manner that can cut or damage wire insulation.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. When the product is placed on a live tree,the tree should be well maintained and
fresh.Do not place on live trees in which the needles are brown or break off easily.
Keep the live tree holder filled with water.
2. If the product is placed on a tree,the tree should be well secured and stable.
3. Before using or reusing, inspect product carefully. Discard any products that have
pg.3
cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed,
to avoid any undue strain or stress on the product conductors, connections, and
wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
To replace the fuse:
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2. 
Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully. Turn fuseholder over to remove fuse.
4. R
 ISK OF FIRE. Replace fuse only with 3 Amp, 125Volt fuse (provided with product.)
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. R ISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
ASSEMBLY INSTRUCTIONS
1. Gently remove contents from packaging and lay out in
a clear area.
2. Secure the stake with handle together. Insert the stake
into the ground.(See illustration 1)
illustration 1
3. Plug power cord into standard wall socket. (See
illustration 2)
4. Unplug when not in use.
illustration 2
CAUTION
pg.4
To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify
string.
FOR INDOOR AND OUTDOOR USE
NOTE: This item is not a toy and should be used for decorative purposes only.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
WARNING
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate this equipment.
THESE INSTRUCTIONS ARE FOR ITEM
NUMBER
38874
Visit WWW.GEMMY.COM for more information.
©2015 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 (877) 250-9032
MADE IN CHINA / PRINTED IN CHINA
pg.5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:eba2eb76-4593-fa47-b59a-e0aa0894e051
Original Document ID            : adobe:docid:indd:54a1329e-495e-11e0-9b25-86da98df4c98
Document ID                     : xmp.id:D69CD4F307206811822ABAF437EF0A50
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0580117407206811822ABAF437EF0A50
Derived From Document ID        : xmp.did:AA3DB2D55F216811822A991C7767A8D7
Derived From Original Document ID: adobe:docid:indd:54a1329e-495e-11e0-9b25-86da98df4c98
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:07:11 11:13:21+08:00
Create Date                     : 2015:07:11 11:13:21+08:00
Modify Date                     : 2015:07:11 11:13:21+08:00
Metadata Date                   : 2015:07:11 11:13:21+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 5
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools