GEP TECHNOLOGY C1 IP Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2688476
Application ID	+/y7i/xSOb4GicdAwER0jw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.34kB (991776 bits)
Date Submitted	2015-07-22 00:00:00
Date Available	2015-07-23 00:00:00
Creation Date	2015-07-15 15:48:03
Producing Software	Adobe Acrobat Pro 11.0.8
Document Lastmod	2015-07-16 13:56:07
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 11.0.8
Document Author:	lenovo

GEP C1 User Manual
Important notes:
Use only the power adaptor attached with the product. Use unauthorized power adapter
may cause damage to your IP Camera.
IP Camera terminal shall be installed in an indoor environment where the rain or snow
could not pour it.
Do not touch the lens of the IP Camera at will. The optimum focus range has been set
before it is delivered out of the factory. If you turn the lens, it may cause incorrect focus
and vague images.
Do connect your mobile device to local Wi-Fi network firstly before initially installation of a
new camera.
RESET BUTTON functions when it was pressed and hold for at least 8 seconds.
Blue LED status:
Flash fast: Device automatic configuration. At this time, you can’t operate the device.
Flash slowly: Waiting for a Wi-Fi connection. At this time, you can find the camera SSID in
the Wi-Fi list and start to connect the camera.
Light on and no flash: Working condition. At this time, the camera has been connected to
a local Wi-Fi network. You can view and control the camera.
1 WELCOME
GEP C1 is a high-resolution (720P), feature-rich digital wireless IP Camera, designed for
superior performance in home/office environments. It combines a high quality digital
Video Camera with network connectivity and powerful android/IOS Apps to bring clear live
video to you wherever you are over the Internet.
You can use this IP Camera to monitor some special places such as your home and your
office. Also controlling and managing images are simple by clicking the app through the
network.
2 Features
☆ 720P HD Streaming video
☆ 4-split screen display
☆ Free on line Dropbox recording
☆ Pure wireless Wi-Fi settings.
☆ Support wireless network (WI-FI/802.11/b/g/n)
☆ Real time streaming
☆ Snapshot and synchronize with Album in your smart devices
☆ Event triggered notifications, Intelligent alerts give alarm in cause of motion detection
☆ Video recording and playback
☆ Enterprise-level security for data transference support WEP/WPA/WPA2 encryption
☆ Optimized H264 video compression for transmission
3 Packing List
Untie the pack and check the items contained against the following list:
☆ Camera
X1
☆ User Manual
X1
☆ DC Power Supply X1
☆ Suction Cup
X1
NOTE:
Please contact us immediately in case of any damaged or short of contents.
Micro SD Card slot
Lens adjustment knob
Mic
Micro USB POWER
Indicator LED
Suction Cup
Reset Button
4. Camera installation
4.1 For hardware installation, please follow below steps.
Step1. Place the suction cup on a smooth surface (such as
glass, marble or metal etc.), and press the cup tight onto the
surface.
Step2. Hold and rotate the cup body 90°until it was
fastened.
Step3. Attach the camera to the metal ball on top of the
suction cup.
** Please be noted that the camera can be separately
adhered to a surface made of iron, as there is a magnet
inside *
4.1 For software, please scan below QR Code to install app “MyCam Pro” into mobile
device.
IOS
Android
4.2. Plug the power adaptor into camera.
4.3. It takes approx 60 seconds to boot up the camera, and the indicator blue led will keep
flashing.
4.4 For Android user:
(Please make sure your mobile device has been connected to a local Wi-Fi)
1. Sign up to use “cloud”
Functions or “skip” to
process
4. Press “Wireless” for Model
C1 and C3
2. Press “+” at the center of
each view window to add
camera
5. Input your local Wi-Fi
password
3. Select “add manually” for the
first time installation. Press “Cloud
import” for users who already
added camera at personal cloud.
6. Connect to the camera by selecting Camera
Wi-Fi SSID “IPCAM-AP-XXXXXXXXXXX”
Note: a. Camera Wi-Fi SSID can be found in the
list when camera Blue LED flashes slowly.
b. Camera is connected to local Wi-Fi when
Blue LED stops flashing. At this time, Camera
Wi-Fi SSID can’t be found.
7. Press “+” to proceed
8. Input device password, the
default is “admin”. This password
needs to be changed later for
safety reason.
9. Done and ready for Real
time streaming
4.5 “Android” Advanced setting
Device Security Code (Device Password) must be reset after initial
installation to enhance safety.
Users can alter Wi-Fi connections remotely by selecting the
detachable wifi signal around the camera and input wifi password.
Users can active /close motion detection function. And can also select
type of notifications such as by ringtone and/or vibration.
This function works only when using micro SD card. By selecting
“ALARM” mode, less storage will be occupied. Please be noted that
this “Alarm” mode only valid when “motion detection” is NOT “off”.
4.6 For Apple IOS user:
(Please make sure your mobile device has been connected to a local Wi-Fi)
1. Sign up to use “cloud”
Functions or “skip” to
proceed
4. Press “Wireless” for Model
C1 and C3
2. Press “+” at the center of
each view window to add
camera
5. Input your local Wi-Fi
password
3. Select “Manually Add” for the
first time installation. Press “Cloud
import” for users who already
added camera in personal cloud.
6. Follow below instruction to connect to the
camera at “setting” page of mobile devices.
Note: a. Camera Wi-Fi SSID is “IPCAM
-AP-XXXXXXXXXXX”. b. Camera Wi-Fi SSID can
be found when Blue LED flash slowly. c.
Camera is connected to local Wi-Fi when Blue
LED stops flashing. At this time, Camera Wi-Fi
SSID can’t be found.
8. Done and ready for Real
time streaming
7. Input device password, the
default is “admin”. This password
needs to be changed later for safety
reason.
4.7 “IOS” Advanced setting
Device Security Code (Device Password) must be reset after initial
installation to enhance safety.
Users can alter Wi-Fi connections remotely by selecting the
detachable wifi signal around the camera and input wifi password.
With Micro SD card, users can record the video stream locally.
By selecting “ALARM” recording mode, less storage will be occupied.
And this “Alarm” mode only valid when “motion detection” is NOT
“off”.
5 “View window” settings
“Mic”; default is close
“Flip” the view
Record video at mobile phone
“Mirror” the view
view
Snap shoot at mobile phone
“Environment” settings
Adjust video quality manually
6 “Device” settings
Press the circle at up-right corner of each living view
window to active the device setting panel.
“Device list” which shows all cameras connected to this app.
Users can remove cameras. This support up to 16 devices.
“Event list” which shows all motion detection notifications by
this camera. This function works only with micro SD card
“Record list” which shows recorded videos and snapshots by
this camera
“Advanced setting” by which users can modify device
password, set motion detection, change wifi connection, set
SD Card recording etc.
“Delete” which removes this view only. will not remove the
camera from APP
7 Trouble shooting
7.1 Have forgotten the device password.
--To reset the password, press and hold down the RESET BUTTON for at least 8 seconds.
(Please keep the power on when do RESET). Default device password: admin
7.2 Can’t find the camera Wi-Fi name “IPCAM-AP-XXXX” in mobile Wi-Fi list during initial
installation process.
-- Wait about 2 to3 minutes after power on the camera until the indicator LED flash slowly.
7.3 Can’t install the camera
-- Be sure your mobile device has been connected to a local Wi-Fi and you know the
password;
7.4 The video stream getting delay
-- The image frame rate is subjected to network bandwidth. You can adjust the video
quality to resolution of 640*360.
7.5 The video image getting vague
-- The most possible reason is the focal length of the camera lens changes. You can adjust
lens by rotate the Lens adjustment knob slightly until the image clear.
7.6 Can’t hear when press the “Mic” button
-- You need to increase the sound volume of your mobile device.
7.7 Can’t talk when press the “Mic” button
-- This function does not work at this model (C1).
7.8 Can’t add the same camera to another mobile device
-- Please select “WIRED” at step 3. If the mobile device is within the same LAN network as
the camera, just use “Search” function. If not, input the UID and device password to add.
Device UID can be found at “Device Setting” page.
7.9 The camera didn’t connect to local Wi-Fi after the installation process.
-- You need to delete the device from you app from the “device list” and install the camera
following the instruction from the 1st step. Until the blue LED stops flashing, that indicates
that the camera is connected to local Wi-Fi.
7.10 I am an expert and want to configure the camera further.
-- You can visit 192.168.234.1 after connecting to the camera through Wi-Fi using IE. The
camera will be at AP mode if not connected to an existing Wi-Fi router.
8. Specifications
ITEMS
Image
Sensor
Lens
Video
Audio
Wireless Security
Remote Access
Network Protocol
GEP C1
High Definition Color CMOS Sensor
1280 x 720 (1 Mega pixels)
2.8mm Glass Lens
95°
H.264
30fps maxmium, downward adjustable
720P(1280 x 720), VGA(640 x 480)
Dual stream
brightness/contrast adjustable by device automaticlly
flip and mirror adjustable by user
Built-in Mic
G.726
IEEE802.11b/g/n
IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.).
WEP, WPA, WPA2
P2P
IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DDNS, UPnP
Motion Detection
Privacy Zone
Storage
Intelligent notification
Set privacy zone manually (using PC)
local storage, support up to 32GB Micro SD card
Sensor
Display Resolution
Lens Type
Angle of View
Image Compression
Image Frame Rate
Resolution
Stream
Image adjustment
Flip image
Input
Audio Compression
Wireless Standard
Data Rate
Wi-Fi
Other
Features
Power
Physical
Environment
Certification
Warranty
Firewall
Reset
Supports IP Filtering
Reset button is available
Microsoft Windows 2000/XP, Vista, 7, 8;Mac OS
Operating System
iOS, Android
Power Supply
DC 5V/2.0A
Power Consumption
7 Watts (Max.)
Dimension(LxWxH)
93*70*106 mm
Net Weight
170g
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity
20% ~ 85% non-condensing
Storage Temperature
-20°C ~ 60°C (-4°F ~ 140°F)
Storage Humidity
0% ~ 90% non-condensing
CE, FCC, RoHS
Limited 2-year warranty(Not including US and China mainland)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : lenovo
Create Date                     : 2015:07:15 15:48:03+08:00
Modify Date                     : 2015:07:16 13:56:07+08:00
Title                           : 
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:07:16 13:56:07+08:00
Creator Tool                    : Adobe Acrobat Pro 11.0.8
Format                          : application/pdf
Creator                         : lenovo
Document ID                     : uuid:da9d3cb3-30e9-4e54-bb01-31a1941485a0
Instance ID                     : uuid:a9d55ec3-4a4c-4cd1-81a0-48b95bab0d19
Producer                        : Adobe Acrobat Pro 11.0.8
Page Count                      : 12

EXIF Metadata provided by EXIF.tools