GIGA BYTE Communications 9QATOMV000 3.5G HSDPA/UMTS/GSM/DCS/PCS PDA Phone User Manual Revised part2

Download:
Mirror Download [FCC.gov]
Document ID	994175
Application ID	Jl0FcXWQxxVjkyD+/1BZ4w==
Document Description	Revised User Manual part2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	181.94kB (2274277 bits)
Date Submitted	2008-09-03 00:00:00
Date Available	2008-10-24 00:00:00
Creation Date	2008-08-15 12:03:49
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-08-15 12:03:57
Document Title	Revised User Manual part2
Document Creator	Adobe InDesign CS2 (4.0)

Chapter 5
Synchronization
5.1 About synchronization
5.2 Installing ActiveSync
5.3 Choosing your synchronization type
5.4 Using ActiveSync tools
5.5 ActiveSync errors
Chapter 5 Synchronization
5.1 About synchronization
ActiveSync Synchronization Tool
You can synchronize information between your PC or Microsoft ® Exchange Server and your MWg Atom V with
ActiveSync on both your MWg Atom V and PC. Before synchronizing information, please install ActiveSync 4.5 on
the PC. Then you can:
● Synchronize information to get the latest information in all locations.
● Add or remove programs on your device.
● Transfer files between your device and a PC.
● Change synchronization settings and the synchronization schedule.
Once you install ActiveSync on your PC, you will be prompted to connect your device and create a synchronization
relationship with the device by using a USB cable or Bluetooth connection. While you are setting up this relationship
you can choose the information you want to synchronize with either your PC or with Microsoft ® Exchange Server.
Note: If your PC is using Windows Vista then you will not need to install ActiveSync. Vista already has Windows
Mobile Device Centre installed which is used for synchronising your device and PC.
48
5.2 Installing ActiveSync
For distribution only
with a Windows Mobile
powered device.
Support for this
product is provided by
MWg.
All rights reserved. Portions
© 00 Microsoft Corporation.
ActiveSync Synchronization Tool
Do not lend or make
illegal copies of this
software.
Getting Started Disc
for ATOM V
with Windows Mobile® software
Includes Microsoft ® ActiveSync ® 4.5, and
Microsoft Office Outlook ® 2007
60-day trial.
Please do not connect your device to the PC before installing ActiveSync 4.5 on the PC from the Getting Started
Disc included in your package. You may only connect the device to the PC by USB cable or Bluetooth after
ActiveSync is installed.
Please note: Your MWg Atom V has built-in ActiveSync already. To install ActiveSync 4.5 in your PC, please
follow the instructions given when you run the Getting Started Disc. After finish installing ActiveSync in your PC,
you will be asked to build a partnership with your device using one of the following connection methods:
● USB cable
● Bluetooth
49
5.3 Choosing your synchronization type
USB cable
You can connect your device with other devices via a mini-USB connector. You can manually change the connection
settings as follows. The new settings will be used when you connect your device to the PC next time.
1. Tap Start > Programs > ActiveSync.
2. Tap Menu tab > Connections.
3. Choose USB in the drop-down menus and check Synchronize all PCs using this connection.
ActiveSync Synchronization Tool
Bluetooth connection
You can also synchronize your information by using Bluetooth wireless connectivity technology, which allows your
device to connect to a Bluetooth-compatible device within 10 meters. For best connection results, it is recommended
that you connect the device to the PC using USB to establish a synchronization relationship before connecting via
Bluetooth.
To synchronize via Bluetooth connection:
1. Execute ActiveSync Help on the PC and follow the instructions for configuring Bluetooth on your PC to support
ActiveSync.
2. Tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Make sure that the device and the PC are within 10 meters or shorter.
4. Tap Sync.
5. After finishing the synchronization, tap Menu > Disconnect Bluetooth.
6. Turn off Bluetooth to preserve battery power if not used.
Please note: Before you connect to this PC via Bluetooth, please make sure that you have set up a
Bluetooth partnership with the PC: Tap Start > Settings > Connections > Bluetooth.
For more details, please refer to Chapter 6 Getting Connected.
50
5.4 Using ActiveSync tools
Once you’ve established the connection partnership between your device and pc, you can start synchronization. The
information you can synchronize includes Contacts, Calendar, Outlook E-mail, Tasks, and Notes.
To select a specific data source:
1. Tap Start > Programs > ActiveSync.
2. Tap Menu > Options.
3. Launch ActiveSync on your PC, and turn the synchronization for specific information types on or off as necessary.
ActiveSync Synchronization Tool
Information for
synchronization
Status of
synchronization
Contacts
Contacts stored on your device can be synchronized with Outlook contacts stored on your PC or with Microsoft®
Outlook® 2003 or later.
New items entered in one location are copied to the other during synchronization. Handwritten notes and drawings
are saved as pictures when synchronizing with your PC, but are removed when synchronizing with a server. For
more information on synchronization, see ActiveSync Help on the PC.
Calendar
You can synchronize calendar items on your device with calendar items on your PC or Microsoft ® Exchange Server.
You can only synchronize information directly with a Microsoft ® Exchange Server if you are running Microsoft ®
Outlook 2003 or later. Calendar synchronization is automatically selected in ActiveSync.
Calendar items entered on one computer are copied to the other during synchronization. Handwritten notes and
drawings are saved as metafiles (pictures).
51
Outlook E-mail
ActiveSync Synchronization Tool
After you have selected Inbox for synchronization in ActiveSync, Microsoft ® Outlook E-mail messages are
synchronized as part of the general synchronization process. During synchronization:
• Messages are updated from the Inbox folder on your PC or the Microsoft ® Exchange server to the Inbox folder
a of the Outlook E-mail account on your device. You can only synchronize information directly with an Microsoft ®
Exchange Server if you are running Microsoft® Outlook® 2003 or later. By default, you’ll receive messages from the
last three days only, the first 100 lines of each new message, and file attachments of less than 100KB in size.
• Messages in the Outbox folder on your device are transferred to Exchange or Outlook and then sent from those
programs.
• Messages on the two computers are linked. When you delete a message on your device, the message will also be
deleted from your PC the next time you synchronize.
• Messages in subfolders in other E-mail folders in Outlook are synchronized only if they have been selected
for synchronization in ActiveSync. For information on initiating Outlook E-mail synchronization or changing
synchronization settings, see ActiveSync Help on the PC or Connections Help.
Please note: Text messages (SMS) and Multimedia messages (MMS) are not received through synchronization.
Instead, they are sent to your device via your network service provider.
Tasks
Tasks stored on your device can be synchronized with Outlook on your PC. Task synchronization is automatically
selected in ActiveSync. New items entered on one computer are copied to your device during synchronization.
Handwritten notes and drawings are saved as metafiles (pictures). For more information on synchronization, see
ActiveSync Help on the PC.
Notes
Notes can be synchronized between your PC and phone either through notes synchronization or file synchronization.
Notes synchronization synchronizes the notes on your device with Outlook Notes on your PC. File synchronization
synchronizes all notes on your device with My Documents folder on your PC.
To synchronize your notes through notes synchronization, first select Notes information type for synchronization in
ActiveSync. The next time you synchronize, all notes in My Documents and its subfolder on your device will appear
in Outlook Notes on your PC. Notes that contain only text will appear as regular notes in Outlook on your PC,
while notes containing written text or drawings will appear in the device format. In addition, all notes in Notes group
in Outlook on the PC will appear in Notes on the device.
To synchronize your notes as files, in ActiveSync, select Files information type for synchronization and clear
Notes information type. When you select Files, My Documents folder is created on your PC’s desktop. All .pwi
files placed in My Documents folder on your device and all .doc files placed in \ My Documents folder on your PC
will be synchronized. Password-protected files cannot be synchronized. ActiveSync converts documents during
synchronization. For more information on synchronization or file conversion, see ActiveSync Help on the PC.
52
Please note: When you delete or change an item on either your PC or device, the item is changed or deleted in the
other location the next time you synchronize. If you synchronize your notes using file synchronization and then later
decide to use notes synchronization, all of your notes will be synchronized with Outlook on your PC and will no
longer be stored in My Documents folder.
5.5 ActiveSync errors
Whenever ActiveSync cannot successfully synchronize your information, it displays an error on your device and
your PC.
ActiveSync Synchronization Tool
Viewing error information
Press Action button when the error text is displayed. ActiveSync will then display more information about the error
that has occurred. Some types of errors can interfere with automatic synchronization. If you suspect that a scheduled
automatic synchronization has not occurred, you should attempt to manually synchronize your information.
Successfully completing manual synchronization will reset automatic synchronization. For more information, see
Synchronizing Information section of ActiveSync Help on your PC.
Please note: Most firewall applications are intended to block network traffic and secure the PC from incoming
network connections. Since ActiveSync uses TCP ports for data transfer with devices, to avoid this potential
experience, you will need to manually allow this traffic to be un-blocked by Firewall applications for the Device using
ActiveSync. You will need to add ActiveSync application processes into Firewall Programs Exception List.
53
Chapter 6
Getting Connected
6.1 Wireless manager
6.2 GPRS
6.3 Bluetooth
6.4 Wi-Fi
6.5 USB card reader
6.6 Internet sharing
6.7 Cell broadcast setting
6.8 Connecting to the Internet
Chapter 6 Getting Connected
Getting Connected
Your MWg Atom V has powerful networking functions that enable you to connect to the Internet or to other devices.
You may use a number of different methods, for example, GPRS network or Wi-Fi to connect to the Internet. You
can set up connections to the Internet and to a corporate network at work to browse the Internet, send and receive
E-mail, use instant messages, and synchronize with ActiveSync. Via Bluetooth or USB functionalities, you can
also transfer files between your MWg Atom V and other devices. There are two types of connection settings: My
ISP and My Work Network. My ISP settings are used to connect to the Internet, and My Work Network settings
can be used to connect to any private network, such as a corporate network. Fill in the settings and you are ready to
connect to the Internet.
6.1 Wireless manager
Wireless Manager is an integrated inter face that
combines GPRS, Bluetooth, Wireless L AN, and
Phone in one function page. To manage these wireless
connections, tap Start > Settings > Connections tab
> Wireless Manager. You may also access Wireless
Manager from Today screen.
Tap All to turn on/of f all wireless connections. If
you only want to turn off Bluetooth, for example, tap
Bluetooth and the button will become colorless. Tap
Menu to set up these wireless connections.
Flight Mode
While flying, you can turn off the wireless connections
while still using the MWg Atom V for other purposes.
1. Tap Start > Settings.
2. Tap the Connections > Wireless Manager.
3. Tap All Wireless Off, when all buttons are colorless,
wireless functions are off. Your MWg Atom V is now
safe to use on a flight.
56
6.2 GPRS
Before using GPRS to connect to the Internet, please contact your network operator to confirm that the service is
enabled and supported on your SIM card. Using GPRS is convenient for you while traveling or working at home.
You can use this device to browse web pages, read or send E-mail or MMS messages, and sign in Windows Live
Messenger through wireless network.
GPRS connection settings
Getting Connected
Your device comes installed with a configuration wizard to install the operator/ carrier settings relevant to your SIM
card. This application should start and attempt to configure the device when you first turn it on. If your device needs
to have the application run manually please follow the process below:
1. Tap > Start > Programs > Auto Config
2. Select your Country and Operator and select OK
If your Operator is not listed you will need to contact them directly with the number on your bill to help acquire and
insert the relevant setting.
Activating GPRS connection
1. Tap Start > Internet Explorer.
2. Input an URL address you desire to browse in address field and tap the arrow icon to go to the URL.
icon will become
icon.
3. After completing connection,
4. Or you may select Start > Settings > Connections tab > Connections > Tasks tab > Manage Existing
Connection > tap and hold on a connection to open pop-up Menu > Connect. After completing connection, you
may go Internet surfing or send and receive E-mail.
Please note: If this device is under flight mode, please turn off flight mode beforehand. Tap icon on Today screen,
then tap Wireless Manager on the pop-up window. Tap on “Phone” to turn the phone function on. The
icon will
appear on Today screen when GPRS is activated.
57
6.3 Bluetooth
Getting Connected
Bluetooth is a short-range wireless communications technology. With Bluetooth, you don’t need to line up the
devices to beam information. The two devices only need to be within a range of about 10 meters. You may use
Bluetooth in the following ways:
1. Exchange information, such as files, appointments, tasks, and contact cards, between devices that have Bluetooth
capabilities. For example, if you and a co-worker each have a device with Bluetooth, you can beam items between
your devices; these items could include files, contact cards, appointments, tasks, etc.
2. Create a dial-up modem connection between your device and a Bluetooth phone. You can then use the Bluetooth
phone as a modem.
Bluetooth settings
To access the Bluetooth settings screen, tap Start > Settings > Connections tab > Bluetooth. To turn on
Bluetooth, check Turn on Bluetooth option; uncheck the option to turn off. If Bluetooth is turned off, you cannot
use Bluetooth to either send or receive information. In order to conserve the battery power or where radio use is
prohibited, you might want to turn Bluetooth off.
By default, Bluetooth is turned off. If you turn it on, and then turn off your device, the Bluetooth radio also turns off.
When you turn on your device again, the Bluetooth radio automatically turns on the radio. If you wish to turn on the
radio, turn off Bluetooth first, and then turn on the radio. To make your device visible to other Bluetooth devices,
check Make this device visible to other devices option.
If Bluetooth radio is turned on, then all of the other Bluetooth devices within range (about 10 meters) can detect
your device and attempt to beam information to it, establish a bond, or use a Bluetooth service. In this mode, other
devices can detect your device whether or not a bond has been created; however, in order to receive a beam from
another device, you must accept it on your device. Other Bluetooth devices can now detect your device and attempt
to beam information to it, establish a bond, or use a Bluetooth service. Note that, to receive beamed information,
you must accept it on your device by selecting Make this device visible to other devices; this also turns on your
Bluetooth radio. If you no longer want your device to be visible, uncheck Turn on Bluetooth option or uncheck Make
this device visible to other devices option to leave the radio on, but not allow detection by other devices.
Bonds
To exchange information in a secure manner, you may use a bond to create a relationship between your MWg Atom
V and another Bluetooth device. To create a bond, you need to enter the same pass code on the two devices that
you want to bond. You need only create a bond once between two devices. Once a bond is created, the devices
recognize the bond and are able to exchange information without your needing to enter PIN again.
To create a bond:
You can create a bond between your device and another device that has Bluetooth. Once you do this,
58
Bluetooth doesn’t need to be in visible mode in order for you to beam information between the two devices; you only
need to have the Bluetooth radio turned on.
1. Tap Start > Settings > Connections tab
2. Tap Bluetooth > Devices tab > New Partnership. Your device searches for other Bluetooth devices and displays
them in the list.
3. Tap the name of the other device in the list, and then Next.
4. Enter a pass code of between 1 and 16 characters and tap Next.
5. Enter the same pass code on the other device.
6. In Display Name, edit the name of the other device if you want.
7. Tap Finish.
Getting Connected
Please note: Make sure that the two devices are within 10 meters of one another and that Bluetooth is in visible
mode on both devices.
To accept a bond:
1. Please make sure that Bluetooth is activated and visible to other devices.
2. When prompted to bond with the other device, tap Yes.
3. Enter a pass code of between 1 and 16 characters , and tap Next. You must enter the same pass code that was
entered on the device requesting the bond.
4. In Display Name, edit the name of the device requesting the bond if you want.
5. Tap Finish.
The bond is created. You can now exchange information with the other device.
To rename a bond:
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth > Devices tab.
3. Tap the bond to rename.
4. In Display Name, enter a new name for the bond and then tap Save.
To delete a bond:
1. Tap Start > Settings > Connections tab.
2. Tap Bluetooth > Devices tab.
3. Tap and hold the bond and then tap Delete.
Beaming information with Bluetooth
1. Tap and hold an item to beam, such as an appointment in Calendar, a task in Tasks, a contact card in Contacts,
or a file in File Explorer.
2. Tap Beam type of item.
3. Tap the device to which you want to send the beam. The item is beamed to the device you selected. If the device
that you want to beam does not appear in the list, make sure that it is turned on, in visible mode, and within 10
meters of your device. Also, make sure that your Bluetooth is turned on.
59
Receiving a Bluetooth beam:
1. Make sure that your device is configured to receive incoming beams and that Bluetooth is in visible mode.
2. Make sure that your device is within 10 meters of the device beaming the information.
3. When prompted to receive an incoming beam, tap Yes. The information is now stored on your device.
Getting Connected
60
Bluetooth headset
To set up your device with a Bluetooth headset, you may
refer to the user guide that comes with your Bluetooth
headset and the following instructions:
1. Tap Start > Settings > Connections tab > Bluetooth
> Mode tab and check Turn on Bluetooth and
Make this device visible to other devices.
Getting Connected
2 . Ta p S t a r t > S e t t i n g s > C o n n e c t i o n s t a b >
Bluetooth > Devices tab and tap Add new device
to scan for other Bluetooth devices.
3. Your device starts scanning for Bluetooth devices.
61
4. Enter the pass code for the located Bluetooth device.
For information, please refer to documents that come
with your Bluetooth headset.This code is usually
"0000".
Getting Connected
5. Define the display name and the type of service your
Bluetooth device offers.
6. When you finish setup, you will see the Bluetooth
device displayed in the menu.
7. Also, there will be a Bluetooth headset icon indicating
the active connection status.
62
COM ports
For example, when you purchase a Bluetooth GPS-supported navigation software; you can register this device as
an effective serial port by following the instructions on the manual of that product and the steps below:
Tap Start > Settings > Connections tab > Bluetooth > COM Ports tab. To register a new serial port:
1. Tap New Incoming Port to enter setup screen.
2. Select a port to be set.
3. Select Finish.
Getting Connected
6.4 Wi-Fi
Wi-Fi is a type of wireless local area network that communicates between two devices by high frequency radio
waves. Your MWg Atom V supports Wireless LAN, which is IEEE 802.11b/g compliant. It allows your device to
connect to the Internet with detected wireless network.
To activate Wi-Fi and connect to a local network
1. Tap Start > Settings > Connections tab > Wireless Manager.
2. Tap Wi-Fi to activate wireless network.
3. Once activated the device will immeduiately look for a local Wi-Fi network, and list those available.
4.Select the appropriate network and you will be promted for a work or internet connection. Usually connect for The
Internet
5.You wil then be promted to enter the network key which is uniuqe for each Wi-Fi network. Enter this code, follow
the prompts and the device will connect to the Wi-Fi network.
To check your Wi-Fi status
Tap Start > Settings > Connections tab > WiFi Utility > Wi-Fi Status tab and you may see the details of your
phone’s wireless LAN connection, including Status, ESSID, BSSID, BSS Mode, Channel, Data Rate, IP Address,
and Signal Strength.
To configure Wi-Fi settings
Tap Start > Settings > Connections tab > WiFi Utility > Setting tab and scroll to set the desired value /mode for
the following setting items: Adhoc Channel, Preamble, Data Rate, Power Save, Power strength, and Auto Power
off. Tab Set button to confirm your setting.
To update IP info
Tap Start > Settings > Connections tab > WiFi Utility > IP Info tab > Renew or Ping button to update IP
information or locate the IP address of the other device.
To search IP address
Tap Start > Settings > Connections tab > Wi-Fi Utility > Site Survey tab > Re-scan button to search the ESSID,
Channel, RSSI, and BSSID of the Wireless LAN.
To change IP address
63
1. Tap Start > Settings > Connections tab > Wi-Fi > Network Adapters tab.
2. In My network card connects to drop-down list, tap either The Internet or Work. If you are connecting to your
ISP at home, tap The Internet. If you are connecting to a private network such as a corporate network at work,
tap Work.
3. Tap the appropriate adapter in Tap an adapter to modify settings box. The IP address will now appear in IP
Address box on IP Address tab.
4. To change TCP/IP settings if your ISP or private network does not use dynamically assigned IP addresses, tap
Use specific IP address and enter the requested information. Contact your ISP or network administrator to get
the IP address, Subnet mask, and/or Default gateway (if needed).
5. To change DNS and WINS settings if your ISP or private network does not use dynamically assigned IP
addresses, tap Name Servers tab and enter the requested information. Servers that require an assigned IP
address may also require a way to map computer names to IP address. DNS and WINS are the resolution options
supported on your MWg Atom V.
Getting Connected
Please note: After activating Wi-Fi, a new window, New Network Detected, will appear if any is detected. Select
Connect and enter your password to the local network. Tap Connect to connect this device with local network.
You may use Wi-Fi for up to 2 hours. The actual use time will depend on the power status of your battery. When this
feature is not in use, please disable it to save power.
6.5 USB card reader
You may use the device as a mass storage device or a micro SD card reader.
1. Tap Start > Settings > Connections tab > USB.
2. On USB Connection Mode screen, tap SD-Card Reader, and then tap Change.
3. Connect the phone to the computer with USB cable.
4. Your PC will automatically detect the new hardware. Now you can view or transfer files to and from your micro SD
card.
6.6 Internet sharing
By using utility, you can set your MWg Atom V as a wireless modem. Internet Sharing allows your PC/Notebook be
connected to a wireless network.
1. Tap Start > Programs > Internet Sharing.
2. Select a USB or Bluetooth PAN as PC Connection type.
3. Connect your device via USB cable or Bluetooth to a PC/Notebook, and then tap Connect.
Please note: Before you tap Connect, please make sure that your have installed a GPRS SIM card, and that you
have connected this phone to your PC/Notebook by USB cable or Bluetooth and disabled ActiveSync.
64
6.7 Cell broadcast setting
You can receive broadcast channel information and news from your service provider (please check you’re your
service provider for this service). Tap Start > Settings > Connections tab > Cell Broadcast Setting.
6.8 Connecting to the Internet
Once connected, you can use Internet Explorer to surf the Internet. While surfing, you can also download files
and programs to be installed on your device from the Internet or intranet. During synchronization with your PC,
download your favorite links and mobile favorites that are stored in Favorites folder in Internet Explorer on the PC.
To synchronize and download your favorite links from your PC, in your PC’s ActiveSync, select Favorites on Tools
menu > Options > Sync options.
Getting Connected
Browsing the Internet
Open Internet Explorer screen by tapping Start > Internet Explorer.
1. In the address bar that appears at the top of the screen, enter the Web address you want to connect to. Tap▼to
choose from previously entered addresses.
2. Tap Back to go back to the previous page.
3. Tap Menu > Refresh to refresh the web page on the screen.
4. Tap Menu > Home to go back to the Home page
5. Tap Favorites, and the favorite address you want to view. To add a favorite link while using your device, go to the
page you want to add, tap and hold on the page, and tap Add to Favorites on the pop-up menu.
65
6
Getting Connected
66
Chapter 7
Messaging
7.1 Short message (SMS)
7.2 Multimedia messages (MMS)
7.3 Voice mail
7.4 E-mail
7.5 Push e-mail
7.6 Windows Live Messenger
Chapter 7 Messaging
You can receive e-mails and text messages in Messaging. Text messages are sent and received through your
network operator by using a phone number as the message address. Before receiving and sending your e-mails or
messages, please make sure that your MWg Atom V has connected to a network.
Your MWg Atom V supports the following messaging services:
SMS (Short Messaging Service)
Messaging
SMS allows you to send short messages. For receiving and sending text messages (SMS), you only need to ensure
that the phone function is activated by observing the satellite icon on the top of outline bar. It is not necessary to
activate GPRS connection or establish new e-mail account and connection.
MMS ( Multimedia Messaging Service)
MMS allows you to send multimedia messages. You can include text, pictures, photos, sound files or recorded
voice in an MMS message. To send an MMS message, your must register and configure the MMS service with your
network provider.
Voice Mail
You can forward a call to your voice mail box when you are unable to receive a call. The voice mail centre will send
you a notification.
E-mail
You can either use your MWg Atom V to directly send/receive e-mails from e-mail server or by synchronously
updating the Microsoft Outlook / Microsoft Exchange Server E-mail in your MWg Atom V and PC.
Push E-mail
The Direct Push technology enables you to have access to your new incoming e-mails in real time.
Windows Live Messenger
Your MWg Atom V is equipped with Windows Live Messenger. To send instant messages, you need to connect to
the Internet.
68
7.1 Short message (SMS)
Writing a text message
1. Tap Start > Messaging > Text Messages > Inbox
folder.
2. Tap Menu > New.
Messaging
3. Tab To to enter the number of your recipient, and tap
the blank content area to edit the message.
4. To access more editing options, tap Menu. The
options inside enables you to:
● Add Recipient.
● Use predefined sentences in My Text.
● Start Spell Check of your text.
● Check Names of your recipients.
● Choose to accept deliver y notification by checking
Request message deliver y notification in
Message Options.
5. To save the message to the draft box, tap Menu >
Save to Draft.
4. To send the message, tap Send.
69
Reading SMS messages
1. Tap Start > Messaging > Text Messages.
2. Tap Inbox to view the sub-folders such as Inbox, Outbox, Drafts, Sent Items, or Deleted Items.
3. Tap Menu to access more options which enable you to:
● Delete the selected message.
● Reply to the sender or Reply All to the included recipients.
● Forward the selected message.
● Move the message to other folders.
● Mark the message as Read or Unread.
● Go To other accounts such as Outlook E-mail or MMS.
● Tools to Manage Folders, Empty Deleted Items, Clear “Text Messages”, create a New Account, and more
Options.
Messaging
70
SMS settings
Text Message settings allows you to customize your Accounts, Message, Address and Storage.
1. Tap Start > Messaging and select Text Messages and then Inbox.
2. Tap Menu > Tools > Options.
In Options you can tap the following tabs to modify the settings:
• Accounts tab: Tap an account to change settings. For example, tap *Text Messages to change Request delivery
notifications and Use Unicode when necessary. Tap New Account to set up a new account. Or tap Signatures
to use signatures to designate accounts.
• Message tab: Set up the following messaging features- When replying to e-mail, include body, Keep copies of sent
items in Sent folder, and the After deleting or moving a message feature.
• Address tab: Select whether to get e-mails from all the contacts with e-mail addresses; alternatively, you can
verify names by defining their e-mail addresses.
• Storage tab: Check the memory space of your device, storage card and attachments, Store attachments on
storage card and specify how you want to empty your deleted items.
Messaging
71
7.2 Multimedia messages (MMS)
Your MWg Atom V allows you to create and share your own MMS messages (with photos, videos, text, and audio)
with your contacts. During editing the MMS content, you can use MWg Atom V built-in camera to snap photos, and
they will be directly inserted in the content.
Creating an MMS message
Messages are created by combining various slides. Each slide can consist of a photo or video, audio, and text.
Select New from the menu of any message box screen to compose a new message. Here's a quick run-down of the
Create screen:
1. Tap the____areas to manually input your address and message subject. Tap To: to select a contact from your
address book. Tap the double down arrow to view the Cc and Bcc fields.
2. Tap here to insert a photo or video.
3. Tap here to input a text message.
4. Tap here to include an audio clip.
5. Tap here to play the message.
6. The message size and the slide number are shown here.
7. The menu lets you do a variety of things (explained later).
8. When you're ready to send your message, tap here.
Messaging
If you would like to choose a pre-made message template instead of adding components yourself, choose "New
From Template" from the Template option of Menu.
Please note: You may not automatically be taken to a blank message. If you are instead taken to a page that
displays pre-made templates, choose the template you want. If you would prefer to create a blank message next
time, check the "Always choose custom" box.
72
Adding a photo or video
You can add either a still image or a video clip to each
individual slide. After you've tapped the area to add a
photo or video, you'll be allowed to select exactly what
you want to include.
1. This pull-down lets you select a specific location that
contains photos/videos.
2. Tap the specific photo or video clip that you want to
add.
Tap Select to add the selected photo/video to the slide.
Or tap Cancel to return to the previous screen.
- Lets you capture a new video.*
*May not be available in all versions.
Adding text
You can add text to any slide. You can either enter in
new text with the keyboard, or use "My Text." You can
also insert an emotion icon or a favorite website link into
your message. My Text is previously saved words or
phrases.
Tap the My Text icon to see a list of pre-saved text
messages. Tap the one you want, and then t ap
"Select" to add it into the message.
Messaging
Tap and hold on a file to see the "Add to Message",
"Large View", "File Info" and "Delete" options. "Add to
Message" adds the selected photo/video to the slide.
"Large View" displays individual photos or videos. "File
Info" displays the file name, resolution, date, and size of
a photo. When you are viewing video file information,
the duration of the video is also listed. "Delete" deletes
the file.
- Displays individual photos.
- Lets you take a new picture.*
Tap "Menu" in the My Text screen to view additional
options:
New: Lets you enter in a new canned text message.
Edit: Lets you modify an existing canned text message.
Delete: Removes the selected canned text from the list.
The following options are available:
- Displays photos/videos as a file list.
- Displays thumbnails (as shown here).
73
Tap the smiling face icon to see a table of Emoticon
icons. Tap the one you want to add it into the message.
1. From the pull-down, select a location that contains
audio files.
2. Tap the file you'd like to use.
You can view file information similar to the way you can
with photos and videos. Tap and hold on a file, then
choose "Play Audio," "File info" or "Delete." The file
name, duration, date, and size are shown when you
select "File info." You can also choose to delete the file.
You can use the playback controls to preview the audio:
Messaging
(Play/Pause and Stop controls are available.)
Tap the star icon to see a list of favorite links. Tap the
one you want, and then tap "Select" to add it into the
message
Highlight a file then tap "Select." Or tap "Cancel" to
return to the previous screen.
- Tap this button to activate controls that allow you
to record new audio:
Record - Tap this button to begin recording.
Stop - Tap this button to stop recording.
Menu commands
The following commands are available along the bottom
of the Create screen:
Adding audio
Single audio clips can be added to each slide. You can
either include an existing sound file, or record a new
one.
74
- Tap here to preview your message.
- Takes you to the previous slide.
- Takes you to the next slide.
- The first number indicates the current slide
you are viewing. The second indicates the total number
of slides. Tap here to see a pop-up list of slides; tap the
number you wish to see.
Menu options
Remove Media - Delete the picture/video, audio
track, or text from the current slide. (The option is not
available if you have not inserted media).
Slides - Insert a slide or delete the current slide. You
can also press “Organize" to arrange the slide order and
display the duration of each slide.
• Tap and drag a slide to move it to a different spot.
• Tap the directional arrows beneath each slide to
increase or decrease the display time.
• Tap and hold for more options (move slide forward/
backward, auto fit duration (adjusts duration to match
audio length), delete.
Insert - Insert a slide into the message.
Messaging
Add Recipients - Choose and add recipients from your
address book. (The option is only available when you
are in the "To" field).
Insert Media - Insert a picture/video, audio track, or
My Text into the current slide. This works the same as
doing it on the slide directly.
Template - Choose "New from Template…" to create
a message with preset content. Choose "Save as
Template" to save your current message as a new
template.
Capture - Take a picture, or record video or audio.
(Some or all these options may not be available).
Attachments - Attach a vCard, vCalendar, or other
file (from the menu, select the type of file you wish to
attach). You can delete any attachment as well.
Send via SMS - Sends the text content to the recipient
via SMS.
Cancel Message - Cancels the creation of the message.
Options - Set the following options of the message.
Background - Choose a background color for the slide.
Text Layout - Choose a layout for the text in the slide.
Text Size - Choose small, normal or large text.
Text Color - Choose a color for the text.
Text Background - Choose a background color for the
text.
Send - Sends the message.
Send Options - Here you can view and edit your send
preferences:
• From the "Delivery" pull-down, select when you’d like
to deliver the message.
• From the "Expiration" pull-down, select how long you’
d like the message to be stored on the server. The
server will stop attempting to deliver the message
after the set time expires.
• Set the message priority from the “Priority” pull-down.
• Delivery report / Read report: By checking these
boxes, you will be notified when your message is
delivered and read, respectively.
75
Tap "Menu” to choose "Save as default" or "Restore
factor y default." Choose "Cancel" to return to the
previous screen.
Messaging
Viewing MMS messages
When viewing messages that you receive or send, or
when previewing a message you're working on, you
have a variety of options.
Use the Play/Pause/Stop buttons to view the message.
Use the
button to display the message in full screen
mode. Use the Left/Right Arrow buttons to skip among
the various slides (if applicable.) You don't need to see
the message straight through; you can skip among the
various slides.
Ta p " M e n u" to v i ew d et a i l e d i n f o r m at i o n of t h e
message.
Tapping "Objects" displays a list of all the message
components. Tap any component to open/view it.
"Info" displays the file name, resolution/duration, date,
and size of an object.
"Menu" contains follow options:
• Save - Stores the current selected object.
• Save into "My Text" - Saves the text into the "My
Text" list.
• Assign to Contact - Lets you associate the selected
image file as a caller ID or audio file as ringer ID. (May
not be available in all versions).
MMS configuration
To view and edit your MMS configuration, choose
"Tools" in the menu that appears at the bottom of
the screen while viewing any message box, choose
"Options", and then choose "MMS" in Accounts.
Note: Not all options are available in all versions.
Retrieve messages immediately - Typically, you
receive a notification whenever a new message is
available. Checking this box downloads new messages
automatically. You can also choose to download only
while on your home network.
OK to download when roaming - Downloads messages
after your confirmation when you are roaming.
Save sent messages - Check this option to save a
76
7
Messaging
copy of messages that you send.
Reject all messages - Check this option to refuse all
incoming MMS messages.
D e ny a n o ny m o u s m e s s a g e s / a d ve r t i s e m e n t
message - Check this option to refuse all the incoming
anonymous or advertisement MMS messages.
Allow delivery report / Allow read report - These
commands allow delivery and read reports to be sent
after you receive and read messages, respectively.
Show sending prompt - Check this option to display a
prompt when you send a message.
Show receiving prompt - Check this option to display
a prompt when you receive a message.
Show sent successfully prompt - Check this option
to display a prompt when the message has been sent
successfully.
Show new message prompt - Check this option to
display a prompt when you receive a new message.
Show download successfully prompt - Check this
option to display a prompt when the message download
is finished.
Show message details - Check this option to display
message information after playing a message.
Disconnect network connection after MMS - Check
this option to disconnect the network connection after
sending a message.
Attempts before giving up - This value sets the
number of times the program will attempt to send your
message before stopping.
Creation mode - Choose the mode to use when
creating a message.
Photo resolution - Choose the resolution for the
images that you send. You may want to decrease the
original resolution to shorten the send/receive time.
7.3 Voice mail
This function enables you to divert received calls to
a voice mail center where callers can leave voice
messages under the following circumstances:
● You are currently on the phone.
● Your phone is switched off or is not able to receive
signals.
● You did not answer the call.
This voice mail service is SIM card and network dependent.
If the voice mail service is not included in your mobile
network operator’s package, you will have to subscribe
to the service separately and configure the settings
manually. Once you have successfully subscribed this
service, you will be notified of a voice mail message by
an icon on Today screen.
Calling the voice mail center
Initiate Phone screen > Speed Dial and call Speed Dial 1.
You will enter the voice mail center.
7.4 E-mail
Synchronously processing E-mail
With synchronization, messages are synchronized
77
bet ween your MWg Atom V and the PC by using
Ac tiveSync and Microsof t E xchange or O utlook.
If you want to synchronously process E-mail, you
must activate the Inbox synchronization function
in ActiveSync beforehand. For more information on
Inbox synchronization, please refer to Chapter 5
Synchronization.
Messaging
Please be aware of the following Inbox Synchronization
process rules:
• Please select a desired cooperation relationship on
New Cooperation Relationship screen in computer to
synchronously transmit information. If you select not
to perform synchronization, you may manually copy
or move E-mail messages between your MWg Atom V
and the computer.
• Only the mails in Inbox of your computer will be
synchronized.
• Only the mails in Exchange or Outlook can be
synchronized.
• The mail from Outbox folder in your MWg Atom V
will be sent to your computer first, and then it will
be delivered through Microsoft Exchange Server or
Microsoft Outlook.
• If a specific letter is deleted in your MWg Atom V, then
it will also be deleted in your computer when you
reconnect your device with computer.
• SMS in your device will not be synchronized.
Establishing E-mail services
If you have E-mail accounts from ISP or company
network, you may use Messaging to receive or send
e-mails. Please refer to the following instructions to set
up a new E-mail account in Messaging.
1. Please acquire the following information from ISP or
company network administrator:
• E-mail address, user name and password.
• POP3 or IMAP4 server name of Intranet E-mail.
• SMTP server name for outgoing E-mail.
78
2. Establish E-mail services:
Tap Star t > Messaging > Menu > Tools > New
Account, and then follow the instructions on the
screen to set up a new E-mail account.
3. See Section 6.1 Wireless Manager to connect your
MWg Atom V to a network and start receiving and
sending e-mails and messages.
4. Connect with E-mail Server:
• Tap Messaging > Menu > Send and Receive.
• Tap Messaging > Menu > Tools > Options >
Accounts tab to change E-mail account settings.
When you finish, your new E-mail account will be
displayed under this menu. You can start connecting
to your E-mail server at this point. You can set up
several E-mail accounts, including your Outlook
E-mail account.
Connecting to the server
You may directly receive new e-mails from E-mail
ser ver without connecting to a computer. You may
select to use it online or offline; if it is online, you may
directly read and reply mail when your MWg Atom V is
connected to E-mail server. You can reply a mail directly
by simply tapping Send.
You may select to disconnect to the internet af ter
downloading only the subjects of new messages or
par tial messages and decide whether to download
the full message later. When you reconnect nex t
time, Inbox will download in accordance to appointed
methods, and send out unsent e-mails in Outbox.
You may choose to read just the e-mails within the last
few days, mail subjects only, or complete mail. You can
also choose to receive only the attachments less than
specific file size. To make these settings, tap Start >
Messaging > Menu > Tools > Options, and change
E-mail account setup by requirement.
Composing and sending an e-mail
Reading and replying an e-mail
Tap Start > Messaging > Menu, and then select Send
and Receive from Menu to start sending and receiving
new e-mails. Select Inbox on the top left of the screen
to view Inbox. Tap on any unread e-mail to view its
content.
When reading e-mails, you can:
1. Tap on a contact in Bcc, Cc, or To field to save this
contact as a new contact.
2. Tap Reply to compose a reply e-mail.
3. Tap Menu to open menu.
1. On your MWg Atom V, tap Star t > Programs >
ActiveSync > Menu > Add Server Source.
2. Input the address of your server in Server Address.
3. Input your network User name, Password, and
Domain, and then tap NEXT.
4. In ActiveSync on your MWg Atom V, tap Menu >
Schedule.
5. Set Peak times to As items arrive and Off-peak
times to As items arrive. Tap OK.
Now you have established a cooperative relationship for
your MWg Atom V and the Exchange Server. The next
time when you tap Start > Programs > ActiveSync
> Sync, you may synchronize with Exchange Server
using Wi-Fi or GPRS.
Messaging
Tap Start > Messaging > New to write a new e-mail.
After writing a new e-mail, select Send on the bottom
left of the screen to send this new e-mail.
When composing a new e-mail, you can:
1. Tap Bcc, Cc, To fields to input recipients’ E-mail
addresses.
2. Tap Subject field to input a subject for your new
e-mail.
3. You may enter mail content in the empty area on the
bottom half of the screen.
4. Tap Send to start sending your e-mail.
5. Select the icon on the bottom center of the screen to
activate or disable screen keypad.
6. Tap Menu to open menu.
Once you are connected to the network, you may look
up your Global Address List over the air from your
MWg Atom V by tapping Contacts. You may send
an e-mail to a contact on your Global Address List
following the same steps as sending E-mail to a contact
saved on your MWg Atom V.
On the e -mail content screen, select and hold to
activate pop-up Menu.
Please note: To be able to use direct push, you need to
have an exchange server. Microsoft Exchange Server
2003 also supports useful functions such as remote
device wipe. To find out more on the benefit and usage
of Microsoft Exchange ser ver, please consult your
company administrator or visit Microsoft’s website:
http://www.microsoft.com
7.5 Push e-mail
7.6 Windows Live Messenger
With Push E-mail, you can access e-mails in real time.
This Direct Push Technology can be enabled by the
Exchange Server 2003 administrator, bringing the latest
information to you. To use Push E-mail, please turn on
Wi-Fi or GPRS to connect to the Exchange Server.
Windows Live Messenger provides functions including
Messenger, Hotmail, and Sync. To use these functions,
you will need to turn on GPRS or Wi-Fi.
Enabling Direct Push on your MWg Atom V
1. Select Start > Programs > Messenger.
2. Tap on the arrows to choose your sign in status and
then tap “Sign in”.
3.Enter your Windows Live Messenger or Hotmail email
Signing in Windows Live Messenger
79
address and password.
4. Select “Sign In”.
Messaging
Hotmail
1. After signing in Messenger, wait for the sync to finish
and then select Start > Messaging.
2. Select Windows Live Inbox from the drop down menu
on the top left corner. You will find incoming emails to
your Hotmail account in the Windows Live Inbox.
80
Composing Hotmail
1. After signing in Messenger, wait for the sync to finish
and then select Start > Messaging.
2. Select Windows Live Inbox from the drop down menu
on the top left corner.
3. Tap Menu > New.
Chapter 8
Multimedia
8.1 Camera
8.2 Video recorder
8.3 Taking a Geo tagged photo
8.4 Photo editor
8.5 FM radio
8.6 Pictures & videos
8.7 JAVA
8.8 Streaming player
8.9 Recorder
8.10 Audio Mixer
Chapter 8 Multimedia
8.1 Camera
You may use camera function in your MWg Atom V to capture important moments.
Tap Start > Programs > Camera, or press down Camera key to launch camera.
Capture mode
Multimedia
During capture mode, you can tap the icons on the top of the screen to switch through different modes, or tap
to open the full camera options menu. To switch to Video mode, simply press the center navigation key or tap
enter the video standby mode.
No.
82
Icon
to
Function
Description
Image Mode
Includes the following modes: Auto (default) / Day /
Cloudy / Fluorescent and Night
Image Size
You can choose among:1600 x 1200 / 1280 x 960 / 800x 600 / 640 x
480 (default) / 320 x 240 / 160 x 120
Image Quality
Normal (default), Fine, Low.
Flash Light
Auto (default), On, Off.
Sequential Shot
18,12,6,3,Off (default)
Shutter Sound
On (default), Off
Zoom
Zoom Range: 1.0x (default) / 1.2x / 1.4x / 1.6x / 1.8x /2.0x / 2.2x / 2.4x
No
Icon
Description
EV Compensation
Provides the following values: +2.0 / +1.5 / +1.0 / +0.5 /0.0 (default) /
-0.5 / -1.0 / -1.5 / -2.0
Macro/Normal mode
Tap this icon to switch between Macro (within 10~60
cm) mode and normal mode.
10
Remained Shots
Indicates estimate number of photos you can take
using the current storage location.
11
Exit
Tap this icon to exit camera mode.
12
Options Menu
Tap this icon to open options menu, in which the
following options are provided: Mode, Effect, EV ,
Size, Quality, Timer, Sequential Shot, Flash, Shutter
Sound, Storage, Reset Camera Settings and Flicker Frequency.
13
Pictures & Videos
Tap this icon to go to Pictures & Videos where the
taken photos and videos are stored.
14
Video Mode
Tap this icon to change to Video mode.
Multimedia
Function
Taking a photo
1. On Camera capture mode, focus on the object.
2. You can also tap on the icons on the top or open options menu to change camera settings.
3. Half way press Camera key to auto-focus, fully press Camera key to take photo.
4. After you take a photo, the image will be categorized in Pictures& Videos.
Please note: The default storage location is phone memory.
83
Photo confirm screen
Multimedia
After taking a photo, you will enter the confirm screen where you can choose to delete or send out the image.
On this screen you can tap the following icons to:
No
84
Function
Description
Icon
Camera
Return to camera capture mode.
Send
Choose to send out this photo via E-mail or MMS.
Delete
Delete the photo on screen.
Pictures & Videos
Go to Pictures & Videos.
8.2 Video recorder
The phone camera can also be used as a video recorder to record memorable moments of your life.
Tap Start > Programs > Camera >
, or directly press Camera key >
to enter video mode.
Multimedia
No
Function
Description
Icon
Video Mode
Tap this icon to switch among the following modes: Auto
(default) / Day / Cloudy /Fluorescent and Night.
Video Size
Set to be 320 x 240.
Remained Video
Length
Indicates the estimated length of video you can take using the
current storage location.
Exit
Tap this icon to exit video mode.
Prepared to record
/Recording
Indicates the video recorder status.
Options Menu
Tap this icon to open options menu, in which the following
options are provided: Mode, Effect, Video Format, MMS
Video, Storage and Flicker Frequency.
Pictures & Videos
Tap this icon to go to Pictures & Videos where the taken clips
are stored.
Video Mode
Tap this icon to change to Video mode.
85
Recording a clip
1. On Video recorder mode, focus on the object. You can also tap on the icons on the top or open options menu to
change video recorder settings.
2. Press Camera key to start video filming.
3. Press Camera key again to stop filming.
4. After you record a clip, it will be categorized in Pictures & Videos.
Please note: The default storage location is phone memory.
Multimedia
Video confirm screen
After recording, you will enter the confirm screen where you can choose to delete or send out the clip.
On this screen you can tap the following icons to:
No
86
Function
Description
Icon
Video
Return to video mode.
Send
Choose to send out this clip via E-mail or MMS.
Delete
Delete the photo on screen.
Pictures & Videos
Go to Pictures & Videos.
8.3 Taking a Geo tagged photo
You can take GeoTagged photos (photos that carry the coordinates of where you were when you took them) and
easily share them with friends through online albums like flickr.
1.After turning on the camera, tap the GPS button
on the bottom left of the preview screen to enable/disable
the GPS coordinates photograph function.
2.After turning on GPS, it will start searching the current GPS coordination and the GPS button will display as
ON
Multimedia
3.When the device GPS has successfully locked on satellite signals, the GPS button will present the status as GPS
. Under this mode, the photos you take will carry the current coordinates of where you are at in EXIF.
4.Aim the camera at the item you would like to capture, press halfway to focus, full press to take the picture.
5.Tap the
button to view the photo you just took in “Pictures & Videos”.
Note: For your ease of use, the filename of photos with coordinates always ends with (GPS) on this device. Example:
Camera0024 (GPS).jpg
8.4 Photo editor
You can handwrite messages on photos, or apply colorful frames and stamps by tapping Start > Programs > Photo
Editor.
On the editor screen, you can tap Undo to reverse the steps, or tap Menu to get further editing options.
87
The tool bar on the bottom also provides 7 functions:
No
Multimedia
Function
Description
Icon
Save
This button appears after you have modified a picture. Tap this to save
the current image.
Undo
Revert
Pen Size
Choose a brush size.
Choose Color
Choose a color of your pen from color palette or mix a paint by
yourself .
Effect
5 effects are available: Gray / Blur / Emboss / Negative / Classic
Choose Frame
3 photo frames are available: Star / Fall / Flower
Add Stamp
5 stamps for you to add more fun touches to your picture.
8.5 FM radio
You can listen to FM radio through your MWg Atom V by
searching channels. Please plug in the stereo headset
before listening to FM radio.
1. Select Start > Programs > FM Radio.
2. You may use function bar or number key on radio
screen to enter your favorite channel.
3. Tap Exit to turn off the radio and exit, or
on the top right of screen to exit radio screen
4. Tap
and play the radio on the background. Now the radio
function is still running and you may use some other
applications at the same time.
Radio Function Bar:
1. Channel Tuner: you may use this bar to tune to your
desired channel.
2. Tap
3. Tap
4. Tap
to switch to the next available channel.
to switch to the previous available channel.
to increase frequency by 0.1 MHz.
5. Tap
to decrease frequency by 0.1 MHz.
6. Tap
to switch between loudspeaker or headset
mode.
88
7. Tap
to start recording the FM radio broadcast
of the channel you are currently listening to. The
recording time will be displayed on the top of screen.
Tap “STOP” to stop recording.
Options:
Radio Volume Control Method:
You may adjust radio volume using the volume control
key on the side of mobile phone. Slide the volume
control key upwards or downwards, and then select
a suitable volume by tapping on the pop-up volume
adjustment bar.
8.6 Pictures & videos
You may use Pictures & Videos function to manage
your photos or videos. By tapping Start > Programs >
Pictures & Videos, you can:
1. Enter different folders.
2. Select photo arrangement.
3. Tap on a thumbnail picture to view the picture.
4. Select Menu for more options.
Running JAVA applications
1. Once a JAVA application is successfully installed,
you can tap Start > Programs > JAVA, and enter
the category to locate the application.
2. Select the application and tap Option > Launch to
execute it.
3. You can also choose Make a shortcut to create a
shortcut in Programs.
Multimedia
Tap Options for the following options:
● About: display information related to this program.
● Recorded File: display the radio recording folder.
● Exit: press exit to completely close radio function.
1. Tap Start > Programs > JAVA > Menu > Install,
and select My Documents, Storage Card, or From
URL.
2. Double tap the .jad file you wish to install.
3. Choose the category you wish the application to be
placed in, and the installation will begin.
8.8 Streaming player
You can use this function to watch TV or listen to the
streaming video on internet or operator WAP portal.
This function supports all the streaming files. TV and
radio content are provided by your operator, click any
streaming link on Pocket Internet Explorer will launch
this player.
Go to streaming client:
Today > Start > Streaming Player.
8.7 JAVA
This device supports JAVA, providing you the freedom
of using JAVA applications and games. You can manage
and execute the Java applications here.
Installing JAVA applications
You can run the installation of a JAVA application stored
on your device or storage card:
Please note:
A JAVA application suite normally consists of a .jad file
and a .jar file that have the identical file name.
They ought to be stored at the same location.
89
8.9 Recorder
Use Recorder to record voice memo and make note
taking simple and efficient. Tap Start > Programs >
Recorder.
Multimedia
1. Tap
to activate sound recording function.
to stop recording sound.
2. Tap
3. Before you start recording, you may set the recording
time in Duration.
4. Check History to show all your recorded files.
Tap on any recorded file on your history list to play
the file.
5. Uncheck History to hide the history window.
6. Tap Menu > Save To to choose the file location.
to leave recorder screen while still keep
7. Tap
recording on the background; or tap Menu > Exit, to
stop recording and exit.
8. When recording in the background, tap
to return
to Recorder. Tap
to stop recording.
Pl ea se not e: If there is an inc oming c all dur ing
re c o r din g, answe r in g t he c all w ill auto m at i c all y
terminate recording. If you want to continue recording
after ending the call, you need to reactivate recording
function.
8.10 Audio Mixer
Audio Mixer enables you to configure bass, treble, and
3D effect while listing to the music. Use Media Player
to play your audio files and then activate Audio Mixer to
adjust the settings. To activate Audio Mixer, tap Start>
Programs > Multimedia > Audio Mixer.
Note: If you use an A2DP Bluetooth headset to listen to
the music, Audio Mixer won’t work.
90

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2008:08:15 12:03:57+08:00
Create Date                     : 2008:08:15 12:03:49+08:00
Metadata Date                   : 2008:08:15 12:03:57+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Format                          : application/pdf
Document ID                     : uuid:f7fd9c24-de81-49cf-a5fd-c7ad6324bb04
Instance ID                     : uuid:f08c29f2-6524-4880-8c53-41052361b55c
Producer                        : Adobe PDF Library 7.0
Page Count                      : 44
Creator                         : Adobe InDesign CS2 (4.0)

EXIF Metadata provided by EXIF.tools