GIGA BYTE TECHNOLOGY GN-BTP01 BLUETOOTH USB PRINTER ADAPTER User Manual

GIGA-BYTE TECHNOLOGY CO., LTD. BLUETOOTH USB PRINTER ADAPTER Users Manual

USERS MANUAL

GN-BTP01Wireless Bluetooth USB Printer AdapterUser GuideRev.1.0 First Edition
GN-BTP01 Bluetooth USB Printer Adapter2This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.FEDERAL COMMUNICATIONS COMMISSIONINTERFERENCE STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a par-ticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is en-couraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.CAUTION:Any changes or modifications not expressly approved by the party responsible for compli-ance could void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncon-trolled environment. This equipment should be installed and operated with a minimumdistance of 20cm between the radiator and your body.The antenna(s) used for this transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter
GN-BTP01 Bluetooth USB Printer Adapter3ContentsChapter1 Introduction .............................41.1 Package Contents........................................ 41.3 LED Status................................................... 51.4 Feature......................................................... 51.5 Specification ................................................ 51.2 System Requirements.................................. 5Chapter2 Getting Started.........................62.1 Install the Bluetooth USB Printer Adapter.... 62.2 How to configure the printer........................ 6
GN-BTP01 Bluetooth USB Printer Adapter4Chapter1 Introduction1.1 Package ContentsBefore the installation procedures, please ensure the conponents are not damaged duringthe shipping. The shipment of the GN-BTP01 includes:-- One Gigabyte GN-BTD01 Bluetooth USB Printer Adapter-- One User Guide-- One Power Adapter (5V, 2A)Please contact your local distributor authorized reseller immediately for any missing ordamaged components. If you require returning the damaged product, you must pack it inthe original packing material or the warranty will be voided.The popularity Bluetooth technology has gained over the past couple of years is far greaterthan the welcome it received when Bluetooth was first discovered in 1994. One of themain factors going against Bluetooth technology was the cost of Bluetooth products. Eventoday, Bluetooth products cannot be considered that cheap. Nevertheless greater accep-tance by manufactures of mobile devices, motherboards etc, has resulted in the expan-sion of the Bluetooth market.-- Windows XP/2000/Me/98se with USB 1.1 Support, One Available USB Port, CD-ROM Drive1.2 System Requirements1.3 LED StatusDescription StatusPower OnWhen the Green LED light is on, the GN-BTP01 is receving power.Data Linking The Blue LED light will flash irregularly.
GN-BTP01 Bluetooth USB Printer Adapter5nRemotely wake up Bluetooth PrinternHighly compatible with versatile printers.nSupport client side Widcom Bluetooth stack softwarenHigh performance radio transceivernSupporting HCRP & SPP profilenLow power standby mode to enable very efficient Power ManagementnWeight: 30g+-5gnDimensions: 80mm x 43mm x 16mmnOne-year manufacturer warranty1.4 Feature1.5 Specification StandardFully Bluetooth V1.1 Bluetooth operation Interface USB male B type Frequency range2.4~2.483 GHz Channel number79 Modulation FHSS( Frequence hopping spreading spectrum ) AntennaExternal antenna supporting diversity Coverage 100 meters RX Sensitivity @ BER 0.1%Typical. -80 dbm, Min -70 dbm ,max -85 dbm LED indicatorsPower on, Link Status
GN-BTP01 Bluetooth USB Printer Adapter6Step1.Start the “My Bluetooth Places” on your computer.Step2.Double click “Entire Bluetooth Neighborhood”.Step3. It will automatically try to search for other bluetooth device. if not, click “Searchfor devices” or “refresh” the list of devices.Step4.Wait until the search has finished.Step5.Double click the printer icon 'Gigabyte_xx'.2.1 Install the Bluetooth USB Printer AdapterNotice:If you have not already installed your printer, please follow the instructions supplied by your printer manufacturer and install your printer first.Step1.Power on the Printer.Step2. Insert the Blutooth USB Printer Adapter into the USB port of the printer.Step3.Plug the end of the power cord firmly into the receptacle on the Bluetooth USBPrinter Adapter. And then plug the other end of the power cord into an electricservice outlet.Step4.The connection between Bluetooth USB Printer Adapter and printer issuccessfully if the LEDs of the Blutooth USB Printer Adapter is blinking.2.2 How to configure the printerChapter2 Getting Started
GN-BTP01 Bluetooth USB Printer Adapter7Step6.The configuration screen of the printer will appear. Select the BluetoothPort of the printer which you have been installed on the Ports page. Andthen go to the General page.Step7.Click the “Print Test Page” button on the General page. If the test page canprint out successully, the setting is completed. And now, you can use the printerthrough Bluetooth USB Printer Adapter to print from any application as younormally would.
GN-BTP01 Bluetooth USB Printer Adapter8Notice:Once you had finished the Bluetooth printer installation setting, you can printany document through the Bluetooth device even the printer does not appearin the “Entire Bluetooth Neighborhood”.
GN-BTP01 Bluetooth USB Printer Adapter9Limited Warranty1-Year WarrantyGigabyte warrants to the original consumer/purchaser that the product free from defects inmaterial and workmanship for no limited time from the original manufactory shipment date.This warranty does not cover the product if it is damaged in the process of being installedor improperly used.Gigabyte may replace or repair the product with either new or reconditioned parts. Re-paired or replaced products will be returned to you at the same revision level as receivedor higher at Gigabyte’s option. Gigabyte reverses the right to replace discounted productswith an equivalent generation product.Customer:Phone No:Address:Email:Model:Serial:Date of Purchase:Place of Purchase:From Whom:Distributor:KEEP THIS STUB FOR YOUR PURCHASING RECORDCustomer SatisfactionGIGA-BYTE TECHNOLOGY CO., LTD.No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R.O.C.Tel: 886-2-89124888Fax:886-2-89124007 http://www.gigabyte.com.twTechnical SupportE-mail: networksupport@gigabyte.com.tw

Navigation menu