GIGA TMS MP101A RFID Reader User Manual MP101A Ca EN A

GIGA-TMS INC. RFID Reader MP101A Ca EN A

Users Manual

13.56MHzIntroduction:The MP101A is a RFID Module for all popular13.56-MHz RFID/contactless standard protocols.MP101Asupports and compatibles with all majorsecured baseband ISO standards including ISO14443Type A, Type B, and Smartlabel ISO15693. The MP101A is well suited for mobile devicesto its low power consumption and low operatingfrom 5V. The on-chip 3.3V regulators are providedstabilize the chip’s power, and simultaneouslypower to the external companion microcontroller120mA. The MP101A is ideal for access control, asAutomatic Fare Collection (AFC), ticketing, vendingmobile solutions Applications:●Pre-payment, Ticketing●Prepaid parking / meal coupon●Multi-application: Tracking, Retail, Customer, Loyalty,Leisure, GamblingOrdering information:●MP101AR-00----RS232 Interface●MP101AU-00----USB Virtual COM Interface●MP101AH-00----USB HID InterfaceWe welcome OEM inquiries ♦Custom design manufacturing is available♦Custom device programming is available♦Call factory for other configurationSTREET,HSI13.56MHz RFID Multi-ISO Protocol Readerpopular protocols. The major global ISO14443 devices due operating voltage provided to simultaneously supply the microcontroller up to as well as vending and Loyalty,InterfaceFeatures: ●Enhanced anti-collision algorithmhandling ●Full 3DES/AES crypto methods●USB and RS232 Interface, 19200●T=CL ISO7816 interface supported●Full access to data of contactlesecurity and microcontroller●Card TYPEISO 14443A MIFARE™Standard, MIFARE 4k,IFARE Ultralight C,MIFARE DESFire®,MIFARE DESFireISO 14443B Smartcard ISO14443B, SRI4K, ISO 15693 SIC5600, ICODE-SLI, ICODE-SLIRead payware and paypass and EISO7816 contact smart card NFC TAG 1~4 supportive ISO18092 Felica READ UID ※Specification is subject to change without8F.,NO.31, LANE 169, KANG-NING STREET,HSI-CHIH,TAIPEI,TAIWAN TEL:FAX:e-mail:promag@ms24.hinet.net promag@gigatms.com.twhttp://www.gigatms.com.twMP101A Reader algorithm for multi-card methods19200 N,8,1 supportedcontactless memory, high microcontroller-based cards 4k, MIFARE Ultralight, MDESFire EV1, SRI512 SLI-L, ICODE-SLIS E-passport without notice. TEL: 886-2-26954214 FAX: 886-2-26954213 mail: promag@ms24.hinet.net promag@gigatms.com.tw http://www.gigatms.com.tw
13.56MHzopularols.jorO14443vicesngvidedllersendingoyalty,erfaceWe welcome OEM inquiries ♦Custom design manufacturing is available♦Custom device programming is available♦Call factory for other configurationSTREET,HSI13.56MHz RFID Multi-ISO Protocol ReaderprotdoperpsimultaneoumicrocontIithmds200portedtlek,ESFireLIhout8F.,NO.31, LANE 169, KANG-NING STREET,HSI-CHIH,TAIPEI,TAIWAN TEL:FAX:e-mail:promag@ms24.hinet.net promag@gigatms.com.twhttp://www.gigatms.com.twMP101A Reader algmethsucontamicrocontrollwTEL: 886-2-26954214 FAX: 886-2-26954213 mail: promag@ms24.hinet.net promag@gigatms.com.tw http://www.gigatms.com.tw Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:. Reorient or relocate the receiving antenna.. Increase the separation between the equipment and receiver.. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.. Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu