GIGA TMS MP101A RFID Reader User Manual MP101A Ca EN A

Download:
Mirror Download [FCC.gov]
Document ID	3506558
Application ID	PwWSaon1cWxaq7zQ2HDSkA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.61kB (95130 bits)
Date Submitted	2017-08-10 00:00:00
Date Available	2017-08-10 00:00:00
Creation Date	2017-04-24 11:41:57
Producing Software	PDFCreator 2.3.0.103
Document Lastmod	2017-07-13 18:07:14
Document Title	MP101A-Ca-EN-A
Document Creator	PDFCreator 2.3.0.103
Document Author:	Arthur Huang

MP101A
13.56MHz RFID Multi-ISO Protocol Reader
Introduction:
Features:
● Enhanced anti-collision algorithm for multi-card
handling
● Full 3DES/AES crypto methods
● USB and RS232 Interface, 19200 N,8,1
The MP101A is well suited for mobile devices due
● T=CL ISO7816 interface supported
to its low power consumption and low operating voltage
● Full access to data of contactless memory, high
from 5V. The on-chip 3.3V regulators are provided to
stabilize the chip’s power, and simultaneously supply the
security and microcontroller-based cards
power to the external companion microcontroller up to
● Card TYPE
120mA.
The MP101A is a RFID Module for all popular
13.56-MHz RFID/contactless standard protocols. The
MP101Asupports and compatibles with all major global
secured baseband ISO standards including ISO14443
Type A, Type B, and Smartlabel ISO15693.
ISO 14443A
The MP101A is ideal for access control, as well as
Automatic Fare Collection (AFC), ticketing, vending and
MIFARE™Standard, MIFARE 4k, MIFARE Ultralight, M
mobile solutions
IFARE Ultralight
Applications:
●
●
●
Pre-payment, Ticketing
Prepaid parking / meal coupon
Multi-application: Tracking, Retail, Customer, Loyalty,
Leisure, Gambling
Ordering information:
●
●
●
MP101AR-00----RS232 Interface
MP101AU-00----USB Virtual COM Interface
MP101AH-00----USB HID Interface
We welcome OEM inquiries
♦ Custom design manufacturing is available
♦ Custom device programming is available
♦ Call factory for other configuration
C,MIFARE DESFire®,MIFARE DESFire EV1,
ISO 14443B
Smartcard ISO14443B, SRI4K, SRI512
ISO 15693
SIC5600, ICODE-SLI, ICODE-SLI-L, ICODE-SLIS
Read payware and paypass and E-passport
ISO7816 contact smart card
NFC TAG 1~4 supportive
ISO18092 Felica READ UID
※Specification is subject to change without notice.
8F.,NO.31, LANE 169, KANG-NING
STREET,HSI-CHIH,TAIPEI,TAIWAN
TEL: 886-2-26954214
FAX: 886-2-26954213
e-mail:
promag@ms24.hinet.net
promag@gigatms.com.tw
http://www.gigatms.com.tw
MP101A
13.56MHz RFID Multi-ISO Protocol Reader
Federal Communicationopular
Commission InterferencealgStatement
ithm
prot
ols.
jor
O14443
meth ds
200
This equipment has been tested and found to comply with the limits for a Class
B digital
d vices
ported
device, pursuant to Part 15oper
of thengFCC Rules. These limits are designedsu
to provide
conta tle
reasonable protection against pharmful
vided interference in a residential installation.
simultaneou
This equipment generates,
uses and can radiate radio frequency
energy
and, if not installed
microcontroll
microcont
ller
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, theres is no guarantee that interference will not occur in a
particular installation. If this equipment
ending does cause harmful interference to radio
k, or television
reception, which can be determined by turning the equipment off and on, the user is
ESFire
encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an oyalty,
outlet on a circuit different from that to which
the receiver is
LI
connected.
. Consult the dealer or an experienced radio/TV technician for help.
I erface
w hout
FCC Caution: To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate
this equipment. (Example - use only shielded interface cables when connecting to computer
or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
We welcome OEM inquiries
♦ Custom design manufacturing is available
♦ Custom device programming is available
♦ Call factory for other configuration
8F.,NO.31, LANE 169, KANG-NING
STREET,HSI-CHIH,TAIPEI,TAIWAN
TEL: 886-2-26954214
FAX: 886-2-26954213
e-mail:
promag@ms24.hinet.net
promag@gigatms.com.tw
http://www.gigatms.com.tw

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : Arthur Huang
Create Date                     : 2017:04:24 11:41:57+08:00
Modify Date                     : 2017:07:13 18:07:14+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : PDFCreator 2.3.0.103
Keywords                        : 
Creator Tool                    : PDFCreator 2.3.0.103
Metadata Date                   : 2017:07:13 18:07:14+08:00
Document ID                     : uuid:771f1b85-2afb-11e7-0000-002e5da05ec6
Instance ID                     : uuid:ddb55902-8c4f-4a37-a250-4edb1b5ca19f
Format                          : application/pdf
Title                           : MP101A-Ca-EN-A
Creator                         : Arthur Huang
Description                     : 
Page Layout                     : SinglePage
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools