GIGA TMS MP30 RFID Reader User Manual WATCHMAN WM3000 Patrol Tour Terminal
GIGA-TMS INC. RFID Reader WATCHMAN WM3000 Patrol Tour Terminal
GIGA TMS >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3159132 |
| Application ID | gR6qEhc8YFDrc2zTW/7BNA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 36.55kB (456891 bits) |
| Date Submitted | 2016-10-10 00:00:00 |
| Date Available | 2016-10-10 00:00:00 |
| Creation Date | 2016-01-25 16:44:14 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2016-09-23 17:47:50 |
| Document Title | WATCHMAN® WM3000 Patrol Tour Terminal |
| Document Creator | Acrobat PDFMaker 8.0 for Word |
| Document Author: | PeterChen |
TM MP30 13.56MHz Multiple Read/Write Module with Antenna FEATURES Supported Protocols ISO14443A/B, all bit rates : 106 kbps ISO15693, all modes Downlink 1 of 4 and 1 of 256 Uplink 6.6/13/26/53 kbps with 1 & 2 subcarrier Card Compatibilities ISO14443A ISO14443B ISO15693 ISO14443-3 ISO14443-4 NFC1-4 TAGs z Ultra small outline 60x30x6.0 mm INTRODUCTION The MP30 is a OEM read/write module with antenna designed for simple integration. The Serial TTL-interface can be directly connected to microprocessors and easily converted to the RS232 serial interface device. The typical reading range of the module is up to 20~40mm depending on the antenna and TAG. The MP30 is a RFID Module for all popular 13.56-MHz RFID/contactless standard protocols. The MP30 supports and compatibles with all major global secured baseband ISO standards including ISO14443 Type A, Type B, and Smartlabel ISO15693. The MP30 is well suited for mobile devices due to its low power consumption and low operating voltage from 5V. The on-chip 3.3V regulators are provided to stabilize the chip’s power, and simultaneously supply the power to the external companion microcontroller up to 120 mA. Information Support Visual C# demonstration Software Protocol Information Low power, low profile for portable designed Plug-in fitting for 13.56Mhz Serial TTL Interface. Baud Rate 19200,N,8,1 Power supply Active 120mA @5VDC Firmware Update The MP30 support the DLL and easy to control this module, The ActiveX Control can be using any terminal program (VB .NET , C#…etc) Standard Configurations: MP30R----RS232 Interface MP30U----USB Virtual COM Interface We welcome OEM inquiries Custom device programming is available 新北市汐止區康寧街 169 巷 31 號 8 樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw TM MP30 13.56MHz Multiple Read/Write Module with Antenna SPECIFICATIONS: POWER REQUIREMENT CURRENT REQUIREMENTS INTERFACE SUPPORTED PROTOCOLS 5V regulated for Operate Voltage . A linear regulator is recommended. Active 120mA @5VDC Serial TTL (reserved)/ RS232 / USB HID (reserved)/ USB Virtual COM Interface ISO14443A/B, all bit rates : 106 kbps ISO15693, all modes Downlink 1 of 4 and 1 of 256 Uplink 6.6/13/26/53 kbps with 1 & 2 sub-carrier ISO14443A ISO14443B ISO15693 ISO14443-3 ISO14443-4 NFC1-4 TAGs 13.56MHz standard. Mifare : 1~3 cm ISO 15693 : 2~4 cm Read / Write 19200,N,8,1 SMT: 60(L) x 30(W) x 6.0(H) mm 5.0g Operating Temp : -20℃ ~ +80℃ CARD TYPE FERQUENCY READ RANGE TRANSPONDER BAUD RATE DIMENSIONS WEIGHT ENVIRONMENT Humidity : 10 ~ 90 % relative PACKAGE DESCRIPTION 60 55 21.80 11.35 3.65 25 30 We welcome OEM inquiries Custom device programming is available T=1.0 3.90 8- 0.95 ole 2H 新北市汐止區康寧街 169 巷 31 號 8 樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw TM MP30 13.56MHz Multiple Read/Write Module with Antenna Antenna Main board V-Cut Description MP30R- 00 MP30U- 00 RS232 USB (Virtual serial port) Pin Numbers Connector JST SH 1.0mm JST SH 1.0mm +5 VDD +5 VDD PIN# TXD D- RXD D+ GND SHIELD GND SHIELD -- -- -- -- -- -- We welcome OEM inquiries Custom device programming available is 新北市汐止區康寧街 169 巷 31 號 8 樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw TM MP30 13.56MHz Multiple Read/Write Module with Antenna Appendix A We welcome OEM inquiries Custom device programming available is 新北市汐止區康寧街 169 巷 31 號 8 樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw TM MP30 13.56MHz Multiple Read/Write Module with Antenna Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The module must be installed in RFID Multi-ISO Protocol Modules. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: WXAMP30”. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. We welcome OEM inquiries Custom device programming available is 新北市汐止區康寧街 169 巷 31 號 8 樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : PeterChen Create Date : 2016:01:25 16:44:14+08:00 Modify Date : 2016:09:23 17:47:50+08:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 8.0.0 (Windows) Creator Tool : Acrobat PDFMaker 8.0 for Word Metadata Date : 2016:09:23 17:47:50+08:00 Format : application/pdf Creator : PeterChen Title : WATCHMAN® WM3000 Patrol Tour Terminal Document ID : uuid:d97e9cb8-3c48-4787-b841-a0f2fda03b3c Instance ID : uuid:85378a6c-c616-4ba3-a07f-d06c1c6df8fe Company : Giga-TMS Source Modified : D:20160125084405 Page Layout : OneColumn Page Count : 5EXIF Metadata provided by EXIF.tools