Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3995073 |
| Application ID | jHGql8K8D9t/g/aYTp5UBA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 22.55kB (281921 bits) |
| Date Submitted | 2018-09-07 00:00:00 |
| Date Available | 2018-09-07 00:00:00 |
| Creation Date | 2018-09-03 10:18:36 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2018-09-05 18:05:51 |
| Document Title | Microsoft Word - MU400 Hardware User Guide_TM951356-01_20180831.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | PCUser |
MU400 Hardware User Guide TM951356-01 Aug 31, 2018 Copyright© 2018 GIGA-TMS INC. Printed in Taiwan Any part of the contents of this document, without the express written GIGA-TMS permission, shall not in any documents, electronic, mechanical form of remakes or spread. File contents are subject to change without notice. Revisions Revision Date 01 Aug 31, 2018 Description Preliminary draft Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below: EMC Radio Spectrum LVD MPE SAR EN301489-1-3 EN300328_868MHZ EN62368 EN62479 EN55032/EN55024 Test standard: FCC rules Part 15 subpart C 15.247 (2013 - 10) Test Result: No deviations from the technical specification(s) were ascertained in the course of the tests performed. Test standard: FCC rules Part 15 subpart B Test Result: Radiated Emission. FCC Part 15. 107 Class B. Test passed. NCC RF LP0002_Base on FCC Warning Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. LIMITED WARRANTY Giga-Tms warrants that the products sold pursuant to this Agreement will perform in accordance with Giga-Tms’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from Giga-Tms (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by Giga-Tms, in which event this warranty shall apply only to the first re-purchaser). During the Warranty Period, should this product fail to conform to Giga-Tms’s specifications, Giga-Tms will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of Giga-Tms. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by Giga-Tms. Giga-Tms reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, Giga-Tms specifically disclaims any liability or warranty for goods resold in other than Giga-Tms’s original packages, and for goods modified, altered, or treated without authorization by Giga-Tms. Service may be obtained by delivering the product during the warranty period to Giga-Tms (8F No. 31 Lane 169, Kang Ning Street, Hsi Chih Dist New Taipei City, Taiwan). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. Giga-Tms will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (“RMA”) number must accompany all returns. Buyers may obtain an RMA number by contacting with sales@gigatms.com.tw EACH BUYER UNDERSTANDS THAT THIS GIGA-TMS PRODUCT IS OFFERED AS IS. GIGA-TMS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND GIGA-TMS DISCLAIMS ANY WARRANTY OF ANY OTHER KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO GIGA-TMS’S SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. GIGA-TMS’S LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO GIGA-TMS UNDER THIS AGREEMENT. IN NO EVENT WILL GIGA-TMS BE LIABLE TO THE BUYER FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT, EVEN IF GIGA-TMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. LIMITATION ON LIABILITY EXCEPT AS PROVIDED IN THE SECTIONS RELATING TO GIGA-TMS’S LIMITED WARRANTY, GIGA-TMS’S LIABILITY UNDER THIS AGREEMENT IS LIMITED TO THE CONTRACT PRICE OF THIS PRODUCT. GIGA-TMS MAKES NO OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, EXPRESSED OR IMPLIED, EXCEPT AS MAY BE STATED IN THIS AGREEMENT, AND GIGA-TMS DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. GIGA-TMS SHALL NOT BE LIABLE FOR CONTINGENT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES TO PERSONS OR PROPERTY. GIGA-TMS FURTHER LIMITS ITS LIABILITY OF ANY KIND WITH RESPECT TO THE PRODUCT, INCLUDING ANY NEGLIGENCE ON ITS PART, TO THE CONTRACT PRICE FOR THE GOODS. GIGA-TMS’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDIES ARE STATED IN THIS SECTION AND IN THE SECTION RELATING TO GIGA-TMS’S LIMITED WARRANTY. Contents Chapter 1 : Introduction ......................................................................... 1 Introduce .............................................................................................................. 1 Fitting ................................................................................................................... 1 Chapter 2：About MU400 ....................................................................... 2 Specification ........................................................................................................ 2 LED Indication ..................................................................................................... 3 Chapter 3：How to use MU400 .............................................................. 4 Before Installing .................................................................................................. 4 Start to use MU400 .............................................................................................. 4 Chapter 4：Troubleshooting ................................................................. 5 Contact Us ............................................................................................... 6 MU400 Hardware User Guide Chapter 1 : Introduction Introduce The MU400 is a Ultra High Frequency RFID Reader compliant to ISO18000-6C EPC Gen 2 protocol with an operating range of 860 to 960 MHz. MU400 have two interface type (Com port or USB HID ). And operate on Android device which is easy to read EPC Before using the MU400 Reader. We recommend that you should already read this user guide. Fitting MU400 include antenna. The appearance as shown below MU400 Top View Software download table © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw MU400 Hardware User Guide Chapter 2：About MU400 Specification MU400 PART NO MU400C Standard RFID spec ISO 18000-6C, EPC Class1 Gen2 Interface COM PORT Power Require Standby : Max 30mA@5VDC Working : Max 300mA@5VDC Dimension L: 55.5mm / W: 41.5mm / H: 10.3mm Physical Characteristics Weight 17.5g Environment parameter Temperature Operating : -10°C ~ +60°C Storage : -15°C ~ +65°C Humidity Operating : +0% ~ +90% (no coagulation) Storage : MAX 90% (no coagulation) Regulatory approvals Authentication CE R&TTE EN300328_868MHZ FCC ID NCC PART 15B/C EN301489-1-3 EN55032/EN55024 EN62368 EN62479 ESD Contact : 4kv , Air : 5kv © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw MU400 Hardware User Guide LED Indication STATUS / COLOR Green Light POWER ON ON POWER OFF OFF © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw MU400 Hardware User Guide Chapter 3：How to use MU400 Before Installing Before Install MU400. Please make sure the following items are ready. A MU400 An Android device which have Type C interface and already installed MU400 APP (DISK5486) Start to use MU400 The MU400 use a Type C to connect the Android device. Open MU400 APP to connect the MU400. Please refer to MU400 Software User Guide. There are instructions about how to read tags. © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw MU400 Hardware User Guide Chapter 4：Troubleshooting 1. Cannot connect to MU400 with MU400 APP? Please check that the MU400 is actually connected to the Android device Please check the power light of MU400 is lighting © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw MU400 Hardware User Guide Contact Us Address: 8F, NO.31, Lane 169, Kang-Ning Street, His-Chih Dist, New Taipei City, Taiwan Tel: 886-2-26954214 Fax: 886-2-26954213 Websites: www.gigatms.com.tw Email: Sales inquiry email - promag@gigatms.com.tw After sales service - support@gigatms.com.tw © 2018 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : PCUser Create Date : 2018:09:03 10:18:36+08:00 Modify Date : 2018:09:05 18:05:51+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:09:05 18:05:51+08:00 Producer : Acrobat Distiller 11.0 (Windows) Format : application/pdf Title : Microsoft Word - MU400 Hardware User Guide_TM951356-01_20180831.doc Creator : PCUser Document ID : uuid:76cace09-ae2b-4ea7-9f2c-8bf59c401ca6 Instance ID : uuid:6c37c361-85c4-4dd9-84f9-6e0f097b0d60 Page Count : 13EXIF Metadata provided by EXIF.tools